Used Metallic Boards for sale (38,538)

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 630 mm, total length: 2,450 mm, total width: 1,120 mm, total height: 2,250 mm, overall weight: 1,800 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, passage width: 630 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 630 mm, workpiece length (max.): 3,000 mm, Equipment: documentation/manual, Sheet metal deburring and edge rounding machine MTP620 – NEW, IN STOCK, with filter-ventilator The MTP620 is a heavy-duty machine for deburring, edge rounding and surface finishing of sheet metal and laser- or plasma-cut parts. A belt grinding unit combined with rotating deburring brushes removes burrs, slag and sharp edges in a single pass. The machine is supplied with an integrated filter-ventilator (vacuum fan) for dust extraction. KEY FEATURES • Belt grinding unit plus rotating deburring brushes • Integrated filter-ventilator (vacuum fan 11 kW) Prjdpjz Rv I Uofx Akioc • DELTA PLC control with touchscreen • DELTA electronic measurement of workpiece thickness • Variable-frequency feed speed 0–15 m/min • Variable-frequency brush spindle speed 0–1000 rpm • Motorised platform height adjustment • Low noise level < 68 dB TECHNICAL DATA • Working width: up to 630 mm • Workpiece thickness: 0.3–100 mm • Workpiece length: 50–3000 mm • Belt grinding motor: 7.5 kW • Deburring brush motors: 2 × 2.2 kW • Platform lifting motor: 0.75 kW • Conveyor motor: 1.1 kW (frequency inverter) • Vacuum fan: 11 kW • Working air pressure: 0.4–0.6 MPa • Sanding belt size: 630 × 2000 mm • Supply voltage: 400 V, 3-phase, 50 Hz • Machine dimensions: 2450 × 1120 × 2250 mm • Weight: 1800 kg CONDITION & AVAILABILITY: NEW machine, year 2026. IN STOCK – available immediately. STANDARD EQUIPMENT • Filter-ventilator unit (dust filter with 11 kW high-pressure vacuum fan, silencer and extraction ducting) included with the machine – ready to connect APPLICATIONS • Deburring and edge rounding of laser-, plasma- and punched sheet metal parts • Removal of slag, burrs and sharp edges from cut contours • Surface finishing and grinding of flat parts up to 100 mm thick • Suitable for sheet metal workshops, laser cutting services and metal fabrication plants TERMS: Price net, EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and manual included. Delivery to any European destination available for an additional fee – delivery quote on contact.

Condition: good (used), through hole: 50 mm, three-jaw chuck diameter: 200 mm, Metal cutting Tooling CBT - 200 MACH-ID 3000 Make: CBT Type: 200 Year: 2001 Diameter: 200mm 4 chuck: x Spindle bore:50mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Pjdpfszdifwex Akijrc

Condition: good (used), Year of construction: 2013, chuck outer diameter: 250 mm, through hole: 100 mm, Metal cutting Tooling CBT - 250 MACH-ID 2996 Make: CBT Type: 250 Year: 2013 Diameter: 250mm 3 Chuck: x Spindle bore:100mm Connector: 70 Predpfx Ajzdiihokioc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1989, chuck outer diameter: 350 mm, through hole: 100 mm, Metal cutting Tooling LAMBERTINI - 350 MACH-ID 2993 Make: LAMBERTINI Type: 350 Year: 1989 Diameter: 350mm Predpfxszdil Ae Akioc 4 chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2968 Pedpfozdiv Aox Akierc Make: TOS Type: SN / SIU Max. Diameter 250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1986, Metal cutting Tooling VDF BOEHRINGER - DUE 560 MACH-ID 2962 Make: VDF BOEHRINGER Type: DUE 560 Pjdpozdixksfx Akijrc Year: 1986 Max. Diameter:150 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1969, functionality: limited functionality, control type: manual, actuation type: electric, total height: 2,000 mm, total length: 1,300 mm, total width: 900 mm, overall weight: 450 kg, table length: 600 mm, table width: 600 mm, Bandsaw from Mössner - Type SM 420 Vertical bandsaw MÖSSNER SM 420 A, year of manufacture 1969. Description: - Factory number: 22600-77/14 - with stepless feed - bandsaw welding device IDEAL - machine light - table size approx.: 60cm x 60cm - table adjustable in inclination! - band dimensions: length: 316cm - 326cm max. - overhang approx.: 40cm - space requirement: W x D x H - 1.30m x 0.9m x 2.0m - weight: approx. 560kg Used, with signs of wear! Inspection possible at any time. Machine is disconnected, standing on a pallet and secured with a tension strap. The machine can no longer be switched on, probably a minor problem. Pedpfx Ajzc Hwtokiorc Private sale - without guarantee or warranty.

Condition: new, “Partially unpacked for photography – unused item from warehouse clearance.” Quantity: 2 available Bus module MVK-MP DIO8 Metal for PROFIBUS 55274 MURR ELEKTRONIK Prodpezr Uchjfx Akisc

Condition: new, Year of construction: 2026, This machine is located in Halver. We are your competent partner for bending machines. We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we address the needs of our customers on site and consider ourselves an extension of the production department. Upon request, we can demonstrate the corresponding machines and provide expert advice and professional training. We offer individual advice tailored to your needs and look forward to your inquiry. The SGR-1000 model is characterized by removable upper and lower segments. In addition, the bending beam is divided into segments. Furthermore, a foot lever is mounted to open the upper bending beam. - Segments of an upper and lower clamping beam expand the range of applications. - Blocking with the help of a pedal allows the hands to be free, and a sheet can be freely positioned. - Bending machine for universal use in repair and body shops. - Compact design, modern shape. - Manual bending machine for standard tasks. - Segments of an upper clamping beam expand the bending possibilities. Technical data: - max. working width: 1000 mm - Segments: 30, 40, 50, 60, 70, 100 mm - Bending angle max. 160 degrees Prjdpfjzuva Tox Akisc - max. sheet thickness (steel) 1.5 mm - Weight 235 kg Option for mounting a guide rail for a roller shear: 300 EUR Accessory roller shear (up to 0.8 mm): 350 EUR All prices are subject to 16% VAT. CE certificate Warranty: 12 months. Self-collection Shipping within Germany: 180 EUR

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 4,000 mm, total width: 2,000 mm, load capacity: 800 kg, Vacuum lifter with battery operation for cordless operation of the lifter. No cables that can be damaged or torn off. Extremely long battery life before recharging. Very high maximum weight of the panels to be lifted, up to 800 kilograms depending on the surface condition - if required, we can also offer lifters for higher loads. Panel size max. 4000x2000 mm and 3000x1500 mm. Panel lifters can also be pushed off individually for parts removal. Suction feet can be moved individually on the traverse. CE-compliant product. Podpfxewzvztj Akijrc

Condition: good (used), Year of construction: 2009, Horizontal: Yes Vertical: Yes Pedpfx Ajwvq Taekijrc Diameter: 220mm indexing: 360.000° Centre height:220mm Control system:Siemens 840D Length: 600mm Width: 400mm Height: 800mm Weight: 200kg

Condition: good (used), beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp Prsdpfx Aovgv Apekiec -Manufacturer: Stahl Süssen, Sheet metal clamp: Lifting clamp type SGK -Clamping range: 0-20 mm -Load capacity: 1000 kg -Dimensions: 190/75/H285 mm -Weight: 6.9 kg

Condition: new, Year of construction: 2025, Very small and high sensitive Metal Detector, flexible setting of detector head, suitable for detecting small products and specials applications. - Specifications: stainless steel framework; weight of product: max. 1kg; detecting speed: 0.17-1m/sec; detecting accuracy: FE from Ø 0.6mm, SUS from Ø 1.8mm; tunnel size WxH: 150x100mm; max. passing size WxH: 110x60mm; power: 220V/0.15kW, 50Hz/60Hz; dimensions and weight: L940xW500xH1198mm, 100/200kg. Prodpfxov Nm E He Akiec Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, Bi-metal saw band M42 VPE with 10 pieces unused Ovp -Type: Biflex Kobali M42 3660 x 25 x 0.90 mm -Quantity: 2x box available -Price/Distribution: per box -Transport dimensions: 790/600/H35 mm Predpfjvu S Tmjx Akioc -Weight: 8.2 kg/piece

Condition: excellent (used), Metal band saw blade, band saw blade, metal saw band -Manufacturer: Holex, Bi-metal saw band unused -Type: 173605 5/8 Prjdpfxjwbr Ddo Akisc -Length: 2710 mm -Number: 7 sheets available -Price: per piece -Transport dimensions: Ø 300 x 40 mm -Weight: 0.5 kg/piece

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. Psdpfx Akjynmw Reisrc * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: good (used), PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board, PCB, isolated gateway Predpfx Akexxp Hneijc Manufacturer: LCL, PCB isolated gateway made of Pro-face monitor Schneider Electric GP-4301TW -Type: -Quantity: 4x circuit boards available (1x with accessories, see photos) Price: per piece -Dimensions: 130/125/H20 mm / 130/125/H25 mm -Weight: 0.1 kg / 0.3 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, lifting clamp, crane clamp, roller clamp -Manufacturer: VEB TAKRAF, roller clamp type WSI Prjdoir E Thopfx Akiec -Clamp range: 35-70mm -Load capacity: 2000 kg -Dimensions: 620/210/235 mm -Weight: 21 kg

Year of construction: 2026, condition: new, functionality: fully functional, power: 6,000 kW (8,157.72 HP), overall weight: 4,800 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, Efficiency, multifunction, and safety — this laser metal cutter is a combination of three. It's time to enhance your production efficiency by 1.5 times! Wattsan 1530 can handle stainless steel, carbon steel, galvanized steel, copper, aluminium, and titanium. This CNC laser cutter for metal has two working tables that measure 1500x3000 mm, which can replace each other. The standard equipment set includes a 6-meter-long pipe-cutting module and the cabin, which protects the operator from reflected radiation and sparks during cutting. You can give our managers a call for additional details! Wattsan characteristics Working area: 1500x3000 mm Laser power: up to 6000 W Prsdpoiicxfefx Akijc Weight: 5500 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 800 mm, sheet thickness (max.): 120 mm, workpiece height (max.): 120 mm, grinding width: 800 mm, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. Pjdpfxsulauve Akiorc With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, overall weight: 83 kg, Used iron cutter, HSS blade, MACC NEW 250, almost new Prodpfx Aoz Hkf Sokioc

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Prjdpfxszy Upks Akiec Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2026, condition: new, functionality: fully functional, Fully Automatic Board Sorting and Sawing System for Sawmills With its fully automatic board sorting and sawing system, JAC Automation & Robotics GmbH offers a powerful solution for significantly reducing manual operations in sawmills and wood processing companies. The system handles the entire process, from the unsorted raw material stack to the finished, sorted, and stacked boards. A reference system is already in successful operation at a sawmill. Your advantages • fully automatic and autonomous system operation • significant reduction in manual handling • relief from personnel shortages • fewer errors due to incorrect sorting Pjdpfxozz Sugo Akijrc • reproducible quality • automatic stacking • flexible allocation based on length and width • automatic defect detection • modular, expandable design In the current manual process, an employee may have to pick up and move a board up to four times. With the automated system, this handling is completely eliminated. Workpiece range • Length: approx. 1,700–5,200 mm • Width: approx. 95–310 mm • Thickness: approx. 30 mm • other dimensions available upon request Automatic process The raw boards are picked up by a KUKA robot and automatically fed to the measuring and sawing station. Length and width are determined using laser sensors. In addition, boards that are too severely warped can be detected and automatically sorted out. Each board can be sawn at both ends. Alternatively, a pure sorting operation without sawing is also possible. Sawdust and waste are automatically transported via a chute and a conveyor belt to a waste container located outside the system. Flexible sorting The reference system has: • 10 freely configurable sorting and stacking locations • 2 reject locations • 2 raw material locations The operator can freely define which length and width ranges are placed on which stacking location. The finished boards are stacked fully automatically. Optionally, intermediate strips can be inserted between the individual layers. Performance With a high variety of products, the reference system achieves approximately: • 4 boards per minute • up to approximately 240 boards per hour Technology • 2 × KUKA KR 120 R3900-K • 1 × KUKA linear unit • Siemens S7-1500 • Siemens F-CPU • 19" touch panel • WinCC Runtime • Production and piece count recording • Remote maintenance via Weidmüller router • Safety fence and Keyence light curtains Individually adaptable The system is newly manufactured and planned according to customer specifications. Layout, workpiece range, number of sorting locations, and the range of functions can be adapted. Optionally, an expansion with AI-based camera technology for detecting wood defects and quality characteristics is possible. Reference area: approx. 25 × 15 m JAC handles the complete project management, including design, manufacturing, programming, assembly, commissioning, and training. Delivery time: approx. 6-8 months after technical clarification and order release. Europe-wide delivery and commissioning are possible. Price on request.

Condition: excellent (used), Schechtl MAE 400 CNC in very good condition, with electric depth stop. Price is negotiable. We ship worldwide. If you have any questions, please call us at: Prjdpfx Aksz Drv Hoijc

Condition: used, Year of construction: 1980, number of straightening rollers: 16, working width: 1,250 mm, sheet thickness (max.): 12 mm, overall weight: 24,825 kg, Manufactured by BLEMA GOTHA (Germany) Max sheet thickness, mm 12,5 Max sheet width, mm 1250 Number of straightening rollers: 16 Straightening speed, m/min 16 Motor capacity, kW 54 Machine weight, kg 24825 Sheet leveling machine BLEMA GOTHA UBR 12,5 x 1250 / 1-16 The WMW UBR 12.5 x 1250/1-16 is an industrial multi-roller sheet straightening machine. Machine is complete and could be prepared for immediate shipment. Predpfx Aezap Rwjkioc