Used Metal Lathe Machine for sale (66,593)

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system, type L90 Automatically operating hot water parts washing machine with automatic basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system (from below, from the side, and from above) with stainless steel nozzles. - Basket diameter: 790 mm - Usable height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Kodpjhgh I Sjfx Amrjlu Wash cycle timer freely adjustable via Omron timer (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Preparation for later installation of an oil separator The parts washing machine is in new condition and has never been used. OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: as good as new (ex-display), Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Kljdpfxeuxuv Aj Amrju

Year of construction: 2026, condition: new, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Kljdpofl Ufzsfx Amrou

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Ksdpfohl H Ubex Amrjlu

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Klodeuxuwaopfx Amrou

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Ksdendcbyjpfx Amrelu

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level. Kjdpfoucw Rbjx Amrolu

Year of construction: 2022, condition: new, machine/vehicle number: 5YXXXX22, SINC MP Series briquetting press machine is the most economical solution for briquetting chip metals by pressing method. It enables you to press by processing the waste chips from CNC and similar machines in the factory. It is not only easy to transport the chips by briquetting instead of powder, but also minimizes metal losses. You can turn chip metals to solidifying and use them as raw materials. Ksdpfxsihca Do Amrjlu * The specifications in photo is for machine that have 60 diameters. Please ask specs for 40 and 80 versions.

Condition: new, Center distance ----- 1000 mm Center height ----- 180 mm Swinging diameter ----- 360 mm Headstock bore ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 KW Weight ----- 1350 kg INCLUDED * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOE5, with 4 tool blocks * 3-jaw chuck, 200 mm * 4-jaw chuck, 200 mm * Faceplate, 250 mm * LED work light and coolant system Kljdpfxsga Ty Es Amrsu * Fixed and traveling steady rest HEAVY-DUTY DESIGN WITH A CAST IRON BASE

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 51 mm, turning diameter: 360 mm, turning diameter over top slide: 220 mm, center height: 180 mm, turning length: 1,000 mm, total length: 1,920 mm, total width: 750 mm, total height: 1,500 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 90 rpm, bed width: 187 mm, Turning diameter in gap: 480 mm, type of input current: three-phase, overall weight: 600 kg, three-jaw chuck diameter: 200 mm, Center distance ----- 1000 mm Center height ----- 180 mm Turning diameter ----- 360 mm Headstock bore ----- 51 mm Bed width ----- 187 mm Spindle speed ----- 90-2000 rpm Motor ----- 1.5 kW INCLUDED * 3-axis digital readout, brand SINO Ksdpfjga Tz Hsx Amrjlu * Quick-change tool holder, type Multifix TOOE5 with 4 toolholders * Electric brake * 3-jaw chuck, 200 mm * 4-jaw chuck, 200 mm * Faceplate, 250 mm * LED lighting and cooling system * Fixed and travelling steady rest * Toolbox with various tools

Condition: good (used), Year of construction: 2011, Edging and contouring - deburring machine ROLEI Type: 00645-KKE2 Year: 2011. Klodpfxewnpflo Amrou

Condition: used, Vertical bandsaw PEHAKA, type SM 4 Manufacturer's No. 27060, year of manufacture approx. 1980 Klsdpsiv A U Esfx Amrsu Overhang: 380 mm Table size: 620 x 480 mm Cutting height: 250 mm Roller diameter: 400 mm Working height: 1120 mm Saw blade length: min. 2900 - max. 3100 mm Saw blade speed: 22-125 m/min, infinitely variable Motor power: 0.6 / 0.75 kW Power connection: 380 Volts, 50 Hz - Infinitely variable saw blade speed via Vario belt drive with lever adjustment and 2 motor speeds - Saw table tiltable +/- 15° - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - Base frame made of U-steel 100 x 50 mm, movable with a pallet truck Space requirement L x W x H: 1050 x 800 x 1950 mm Weight: 355 kg Good condition

Condition: used, Pneumatic edge folding machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-bending sheet metal edges For creating an edge fold Edge folding machine for thin sheet metal, as an alternative to a bending press Manufacturer's No. 9166002, Year of manufacture 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Kodpfxedzqblo Amrjlu Space requirement L x W x H: 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The edge fold is the doubling of the sheet metal in the edge area, i.e., folded over once to increase the stiffness of the sheet metal. The fold creates a rounded edge, which reduces the risk of injury from cuts on the sharp sheet metal edge. Ideal for sheet metal processing of sheet metal furniture, cladding sheets, or for the construction of ventilation and soundproofing systems.

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Kljdpfx Aowkvi Nemrsu Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition

Condition: used, Manual swing bending machine KRAMER, type AMS 650 x 1.5 Manual swing bending machine, press brake Year of manufacture approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper die opening approx. 60 mm Bending die adjustment approx. 0-25 mm Bending angle 0-180° Kljdpfx Amodzqaaereu - Upper die adjustment via hand crank - Pre-setting rail for the bending die - One-piece sharp bending rail, 135° Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg Good condition

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. Kedpfx Aevu Ticsmrelu Trumpf TruPrint 3000 G02 with the options Zirox Sensor, Single Laser, and Powder Bed Monitoring. Trumpf TruPrint 3000 including filter system. Serial number: S0721Q0022 Laser performance: Laser beam on 17,508 hours. The system was finally used with aluminum AlSi10MG. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation before disassembly. All axes are properly secured. The machine can be transported on a standard truck. Accessories: 4 dosing containers 1 construction cylinder 1 overflow container Various spare parts such as protective glass, etc. Manuals The Armanni CAR.Elev pallet truck. A container changer is also in stock and can be offered as an option. Fast to high-quality 3D components D1. Machine concept The TruPrint 3000 is a universal medium-format machine with external parts and powder management for the industrial production of complex metal components using 3D printing. Its large build volume offers high flexibility in terms of the size, quantity, and geometry of the respective application. Technical specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Build rate 6 cm3/h 5 - 60 Layer thickness 7 μm 20 - 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 - 500 O2 concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring - Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas - Nitrogen, argon Power supply V / A / Hz 400 - 32 - 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The information in our offer and order confirmation is authoritative. Technical data TruPrint 3000 Table 3

Condition: used, Year of construction: 2008, working width / mm workpiece height / mm / Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Operating voltage 400 VAC Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Weight of the machine working width 1540 mm approx. 5600 kg Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Klsdpfeinwwzex Amrju Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER STAR 200 MAX lathe with a center distance of 640 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Center height 200 mm - Center distance 640 mm (extendable*) - Stepless speed 300 - 2,900 rpm - Hollow spindle D = 15 mm with inner cone MK2 - Quill travel 100 mm - Motor 1.5 kW / 2 HP / 400 V (with 230 V plug!) - Weight 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, woodturning, turning knife, wood turning, turning, machine, Hager Kedjtpnzdopfx Amrelu Reference: R-A0117

Condition: as good as new (ex-display), Year of construction: 2022, EXHIBITION MACHINE For sale is a new TEKNATOOL Comet 2 DR lathe including base frame with a maximum center distance of 400 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data: - Center height 150 mm - Center width approx. 400 mm (extendable) - 3 speed levels (belt levels): 250 - 680 / 530 - 1,420 / 1,380 - 4,000 rpm - Digital display for speed - Spindle connection M33x3.5 with ASR (Euro) drain safety groove - Spindle and tailstock MK2 - Motor 0.6 kW / 0.75 HP - Forward / reverse rotation Kledpfxsvbcm Ro Amreu - Knife support 150 mm - Weight approx. 32 kg - Year of manufacture 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, lathe, turning machine, turning, turning knife, woodturning, turning, machine

Condition: excellent (used), Year of construction: 2019, COURSE ROOM MACHINE For sale is a used Hager HDG 250 lathe with a center height of 250 mm. The machine was used in our in-house lathe courses, is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Klodpfxertqi Io Amrou Technical data: - Center height 250 mm - Center width 1,000 mm - Spindle connection M33 x 3.5 with MK3 cone and ASR (Euro) drain safety groove - Spindle bore (diameter) 20 mm - Tailstock quill 150 mm / MK3 - Hand rest upper part 300 mm - Weight 270 kg - Length x width 1,800 x 640 mm - Motor 2.2 kW (3 HP) - Speed 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, lathe, woodturning bench, turning, woodturning knife, woodturning, turning, machine Reference: DH25500-K

Year of construction: 1987, condition: not inspected (used), Sharpening machine for metal and segmented circular saws. Circular saw blade diameter from 80 - 710 mm. Tooth pitch adjustable. Tooth height 1.2 - 14 mm. Working speed steplessly adjustable, 15 - 180 teeth/min. Ksdpfslmkpfjx Amrslu Wet grinding system, NC controlled.

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,500 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,830 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,700 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 2,000 mm, table width: 1,500 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,500 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,500 mm, height adjustment type: mechanical, input current: 61 A, pass-through width: 1,500 mm, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable and experienced company specializing in metal and woodworking machinery. With decades of expertise and a proven track record of innovation, Madora is recognized for delivering durable, efficient, and user-oriented solutions, specifically tailored to the requirements of industrial clients throughout Europe. Our machines are engineered for precision, performance, and long-term reliability—all offered at competitive market prices. Kledowzvkhopfx Amrju The GP 1500 3Z is an outstanding, multi-purpose deburring machine designed for cleaning sheet metal after a variety of cutting processes. With three independent "Z"-type processing units, this machine stands out for its exceptional versatility and high processing capacity. What does this mean in practice? It allows up to three operations in a single cycle: not only does it efficiently remove scale and slag after plasma cutting, but it also enables simultaneous deburring and edge rounding of workpieces following laser cutting—all in one pass. Its wide machining range, with material thicknesses and working widths up to 1,500 mm, makes it suitable for both small and large workpieces. With the appropriate tooling, the machine is also capable of heavy-duty edge rounding and oxide layer removal. The GP 1500 3Z deburring machine features a TFT touch-screen control panel, enabling the operator to fully and continuously monitor and adjust machining parameters such as workpiece height, feed rate, and tool rotational speed. Each processing unit can be operated independently, giving the user complete flexibility in selecting which operations to perform during a single pass.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 38 mm, turning diameter: 280 mm, turning diameter over top slide: 165 mm, center height: 140 mm, turning length: 700 mm, total length: 1,280 mm, total width: 700 mm, total height: 1,650 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 70 rpm, bed width: 180 mm, type of input current: three-phase, overall weight: 320 kg, quill mount: MK 5, three-jaw chuck diameter: 160 mm, Equipment: rotational speed infinitely variable, WMP290V-F Lathe & Milling Combination Kljdpfx Amjpz I Iqsrou with frequency inverter including 2-axis digital readout SINO including premium base cabinet LATHE Centre distance ----- 700 mm Centre height ----- 140 mm Swing over bed ----- 280 mm Swing over cross slide ----- 165 mm Spindle bore ----- 38 mm Spindle taper ----- MT5 Lathe speed range ----- 70-1800 stepless rpm Tailstock taper ----- MT3 Motor power ----- 1.5 kW Weight ----- 230 KG MILLING UNIT Milling head outreach ----- 185 mm Milling speed range ----- 50-2250 stepless rpm Milling spindle taper ----- MT2 Milling head swiveling ----- +/- 90° Quill stroke ----- 50 mm Motor power ----- 750W Weight ----- 75 KG

Condition: new, Center distance ----- 1500 mm Center height ----- 230 mm Swinging diameter ----- 460 mm Headstock bore ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 KW HEAVY-DUTY DESIGN - WEIGHT 2650 KG INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOB2 with 4 tool holders Kljdpfxsh U Nzts Amrsu * 3-jaw chuck, 250 mm * 4-jaw chuck, 320 mm * Faceplate, 350 mm * Fixed and follow rest * LED work light and cooling system * Electric brake, CE * Toolbox with various tools

Condition: new, Center distance ----- 2000 mm Center height ----- 330 mm Turning diameter ----- 660 mm Main spindle bore ----- 105 mm Bed width ----- 405 mm Spindle speed ----- 36-1600 rpm Motor ----- 7.5 kW HEAVY-DUTY DESIGN - WEIGHT 4080 KG INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool holder, type Multifix TOOC3, with 4 tool holders Kjdpega T Acefx Amrslu * 3-jaw chuck, 325 mm * 4-jaw chuck, 400 mm * Faceplate, 630 mm * Fixed and traveling steady rest * LED work light and cooling system * Box with various tools