Used Metal Belt for sale (42,302)

Condition: excellent (used), Year of construction: 1999, With the AL100 U, you can notching workpieces from Ø 20 to Ø 76.1 mm. The cross support and the carriage with a swivel clamp are steplessly adjustable. This allows grinding of all pipe profiles at any desired angle from 30° to 90°. The AL100 U is capable of grinding square, rectangular, and round tubes of various wall thicknesses and is suitable for all common materials. The abrasive belt can be quickly tensioned, and the grinding rollers can be changed within seconds. Contact rollers are available in all standard sizes. Technical Data: Belt width: 100 mm Belt length: 2000 mm Belt speed: 30 m/sec Voltage: 400 V Motor speed: 2800 rpm Motor power: 3 kW Machine dimensions (L x W x H): 1350 x 600 x 1200 mm Weight: 136 kg Accessories / Special Features: • High-performance belt grinder with high belt speed • Robust three-phase motor • Low vibration • 3 grinding rollers for precise notching on tubes, profiles, and flat materials: o 1 contact roller with Ø 21.5 mm for 3/4" pipe o 1 contact roller with Ø 40.5 mm for 1 1/4" pipe o 1 contact roller with Ø 46.5 mm for 1 1/2" pipe • CE compliant Additional contact rollers available in all standard sizes. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel / Germany Dujdpfsyplmtex Acxjp

Condition: good (used), Bracket, holder, support block, support for conveyor belt, belt conveyor, transport belt, belt conveyor, roller conveyor -Support stand: height-adjustable, swiveling -Height: up to approx. 620 mm -Width: 540 mm -Dimensions: see photos -Number: 2x holders available Price: per piece Duedpfx Ash Eciyecxep -Overall dimensions: 665/150/H617 mm -Weight: 13.4 kg/pc.

Condition: good (used), Bracket, holder, support block, retaining support for conveyor belt, belt conveyor, transport belt, belt conveyor, roller conveyor -Support stand: height-adjustable, swiveling -Height: up to approx. 650 mm -Width: 550 mm -Dimensions: see photos -Number: 12x holders available Price: per piece -Overall dimensions: 665/150/H650 mm -Weight: 15.3 kg/pc. Dujdpfx Ash Ecirjcxep

Year of construction: 2001, condition: like new (used), machine/vehicle number: ECB1101424575, metal detector checkweigher Dusdpfxodwhkmj Acxjp 2001, stainless frame, Aperture 330mm x 120mm, belt width 200mm, overall length 2500mm, weigh bed 400mm x 250mm, with pneumatic rejects and bins

Condition: good (used), functionality: fully functional, Year of construction: 2021, Motorized Swing Bending Machine Make: Hezinger / Erbend, Model: MFA 3200x3mm Year: 2021 Dedpfx Aoyr Npwscxoup Technical Data Manufacturer: Hezinger / Erbend Model: MFA 3230 Year of manufacture: 2021 Working length: 3,200 mm Bending capacity: 3.0 mm Air pressure: 6 bar Upper beam stroke: 250 mm Motor power: 20.2 kW Weight: 8.0 t Equipment • Rotatable upper beam with 2 tools • Bending beam swiveling range 0 - 135° • Motorized lowering of the bending beam 80 mm • Manual crowning of the bending beam • Back gauge 6 - 1,300 mm with supports and ball rollers • ErFold control unit • Safety footswitch with 3 pedals • Light curtain for front safety • LED status indicator • Tools: - Gooseneck upper beam rail 30°, R = 1.0 mm - Three bending beam rails: 15, 25, 35 mm - Segmented gooseneck with a height of 120 mm All details are subject to change and supplied without guarantee. A powered demonstration is available any time in our showroom.

Condition: ready for operation (used), Belt Conveyor Kleemann Brand: Kleemann. 3 pieces on Stock: *1x A-A length = 10.000 mm. Beltwidth: 800 mm. Dodpfx Aew Rifvocxeup Driving: 7,5 kW Gearbox. *2x A-A length = 10.000 mm. Beltwidth: 1000 mm. Driving: 7,5 kW Gearbox.

Condition: ready for operation (used), Year of construction: 2019, total height: 2,050 mm, overall weight: 4,500 kg, travel distance X-axis: 260 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3s Matsuura Lumex Avance 25 hybrid metal printer was manufactured in 2019. It features a hybrid system combining metal laser sintering and high-speed milling, with a maximum workpiece size of 250 × 250 mm and a table load capacity of 90 kg. The spindle speed ranges from 450 to 45,000 rpm, accommodating a tool magazine of 20 tools. Consider the opportunity to buy this Matsuura Lumex Avance 25 metal 3D printer. Contact us for further details. • Working hours: 2,000 h • Technology: Hybrid system (metal laser sintering + high-speed milling on a single platform) • Laser type: Yb fiber laser • Laser power: up to 400 W • Layer thickness: 0.05 mm • Build/work area: • Max workpiece size: 250 × 250 mm • Table size: 270 × 270 mm • Axes/travels: • U-axis (sintering table): 185 mm • W-axis (powder blade): 522 mm • Spindle (milling): • Tool holder: BT20 (special Matsuura taper) • Tool magazine: 20 tools • Accuracy: • Positioning accuracy (X/Y/Z): ±0.0025 mm • Repeatability (X/Y/Z): ±0.001 mm • Materials (typical): Tool steels, maraging steel; stainless steels (e.g., 316L, 630); titanium alloys (Ti‑6Al‑4V, Ti‑6Al‑7Nb) • Machine data: • Power supply: AC 200/220 V, 50/60 Hz • Installed power: approx. 39 kVA • Inert gas: Nitrogen / Argon Duedpfeyhcxkjx Acxjp

Year of construction: 2001, condition: ready for operation (used), This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information. • Plastic-metal composite pipe system • Pipe diameter 14, 16, 18, 20 mm • Material LDPE-MDPE-HDPE, silane-crosslinkable PE • Diffusion barrier aluminium thickness 0.15 - 0.4 mm • Line speed max. 40 m/min. Dodpfx Ajx I S N Hscxsup • Axle height 1000 mm

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN Duedpfeydnigsx Acxep • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,000 mm, total width: 600 mm, total height: 1,400 mm, cutting range round steel at 45°: 90 mm, cutting height (max.): 105 mm, saw drive: 4,700 W, empty load weight: 200 kg, COSEN CIRCULAR SAWS MANUAL MC-315 These circular saws are new in the COSEN portfolio, and are available in manual, which means you have to pull the lever down to cut. Technical features: Compact, pedestal-mounted, hand-operated circular saws can be easily handled in the workshop or even on factories. Hand-operated vise Heavy duty motor Robust construction Low voltage on/off switch 45° and 90° bevel cutting Two cutting speeds Electric coolant pump with tank COSEN MC-315 CURRENT POWER: 400V DISC DIAMETER: 315 mm MOTOR CAPACITY: 4.7 kW DIMENSIONS: 1000 x 600 x 1400 mm WEIGHT: 200 kg RPM 45/90 RPM MAXIMUM CUTTING CAPACITY ROUND MATERIAL 90°: 105 mm; 45°: 90 mm SQUARE MATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm Djdpsv R Dxaefx Acxjup RECTANGULAR MATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm

Year of construction: 2015, condition: used, Year of manufacture: Mar 2015 New: No 5 stuks gebruikte trailerbanden 385/65 R 22.5 7/8/9 mm. Dsdpfx Acoypb Hijxoup

Condition: excellent (used), functionality: fully functional, Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Duedpfx Acexqgdnjxsp

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Duedpshmmfksfx Acxsp Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: excellent (used), Year of construction: 2007, operating hours: 592 h, Calibration and fine sanding automatic machine, wide belt sander with electronic segmented sanding pad and lacquer sanding capability A video of the machine in operation can be provided upon request. Ideal sanding machine for interior finishing companies, also suitable for intermediate lacquer sanding. Single belt machine with combination unit and electronic segmented pressure beam, edge segments can be switched on and off Segment width of the pressure beam: 35mm Contact roller pneumatically adjustable, low wear thanks to grooved steel roller Grit compensation Drive motor 7.5kW with automatic motor brake, infinitely variable belt speed controlled by frequency converter from 2 - 18 m/s Feed belt speed infinitely adjustable via frequency inverter from 2.5 - 13m/min Pneumatic, workpiece-controlled belt blow-off device Cleaning brush at the outfeed Constant working height at 900mm by adjustment of the machine's top section, making it integrable into sanding lines Feed belt is still very grippy and in excellent condition Maximum sanding width approx. 1090mm Workpiece height approx. 3 to 150mm Standard sanding belt size 1120 x 1900mm 3 rubber-coated pressure rollers Infeed roller table and foldable outfeed table Preparation for vacuum blower. The conveyor belt is perforated, and a plug for an optional blower is available. Alternatively, the conveyor can also be connected to an extraction system. Extraction connection: 1 x 180mm, 1 x 140mm, and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine operation. Parameters: belt speed, feed speed, workpiece height, pressure beam application points front and rear, edge segments, belt blow-off nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE mark Operating manual (Delivered) without the connection cable shown Original paint, only repainted in a few areas Approx. 592 operating hours, about 40 minutes per week on average. Duodpfoym Du Rox Acxop Dimensions approx. 1800 (with table 2600) x 1800 x 2150mm (LxWxH). Weight approx. 2200kg. The machine can be inspected and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available from our warehouse, see 'Other offers from this provider.'

Condition: excellent (used), axle configuration: 3 axles, total length: 13,600 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 385/65R22,5, color: white, Year of construction: 2026, Equipment: ABS, = Additional Options and Equipment = - Electronic Braking System (EBS) - Air suspension = Notes = Dewagtere Bandwagen agricultural 53 & 60m³, also available with fan for onions. More information: Mark van der Steen = Further Information = Dujdpfx Asxdhvxecxop General Information Year of manufacture: 2026 Axle configuration Tire size: 385/65R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Tire tread left: 100%; Tire tread right: 100% Rear axle 3: Lift axle; Tire tread left: 100%; Tire tread right: 100% Condition Technical condition: very good Visual condition: very good Additional information Please contact Mark van der Steen for further information.

Condition: not inspected (used), Year of construction: 2008, operating hours: 32,164 h, functionality: unexamined, machine/vehicle number: 3201250, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, workpiece length (max.): 2,695 mm, workpiece width (max.): 1,524 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item between 23/03/2026 and 27/03/2026! The machine is also equipped with a cutting function (see pictures)! TECHNICAL DETAILS Maximum tensile strength stainless steel: 600 N/mm² Sheet thickness stainless steel: 0.5 mm – 1.25 mm Typical sheet thickness stainless steel: 1.0 mm Maximum tensile strength steel: 410 N/mm² Sheet thickness steel: 0.5 mm – 2.0 mm Typical sheet thickness steel: 1.5 mm Maximum tensile strength aluminium: 265 N/mm² Sheet thickness aluminium: 0.5 mm – 3.0 mm Typical sheet thickness aluminium: 1.5 mm Sheet dimensions Length: 405 mm – 2,695 mm Width: 190 mm – 1,524 mm Maximum diagonal: 2,800 mm Maximum centering dimension: 2,500 mm MACHINE DETAILS Hydraulic System Base machine oil capacity: approx. 500 dm³ Shear lift table oil capacity: approx. 20 dm³ Cooling System (Closed) Cooling unit R81: approx. 175 liters Cooling unit R101: approx. 260 liters Service Connections Mains voltage: 400 V Frequency: 50/60 Hz Connection cross-section: 4 × 25 mm² Pre-fuse: 80 A Average current: 42 A Power consumption: 24 kW Control voltage: 24 V AC/DC Industrial PC / Monitor / Power supply units: 220 V AC Open Cooling System Cooling water requirement: approx. 2.0 m³/h Max. inlet temperature: 20 °C Compressed Air Required pressure: 6 – 12 bar Max. air consumption at 6 bar: approx. 2,275 Nl/min Dimensions & Weight Required space (L × W × H): approx. 18,000 × 11,500 × 3,500 mm Transport width: Up to approx. 3,000 mm Dsdpfxoycquce Acxsup Total weight (without oil): approx. 27,760 kg Heaviest component (bending machine): approx. 20,040 kg Operating hours: 32,164 h Robot Manufacturer: KUKA Model: KR 150 L110-2 2000 Year of manufacture: 2008 Weight: 1,285 kg Note: Robot has been modified for use with a magnetic lifter SCOPE OF DELIVERY Available manuals Various spare parts in wooden crates

Condition: good (used), Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm Dodpfx Ashvtciecxjup -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg

Year of construction: 2014, operating hours: 5,900 h, condition: ready for operation (used), General Data Measurements width 3100 mm Measurements depth 1850 mm Measurements height 2600 mm Machine weight 2800 kg This Behringer HBP 410-723 G Metal Band Saw was manufactured in 2014. It features an automatic feed and discharge system, with a working area capacity up to 700 mm x 400 mm. Operating for approximately 5,900 hours, it supports a cutting speed of 20 – 140 m/min and is powered by a 4.0 kW saw drive. Consider the opportunity to buy this Behringer HBP 410-723 G Metal Band Saw. Contact us for more information about this machine. Dusdjx D H A Dspfx Acxep Application Types Sawing

Year of construction: 1984, condition: ready for operation (used), travel distance X-axis: 15,900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 790 mm, overall weight: 23,000 kg, number of axes: 3, General Data Machine weight 23000 kg Main Drive Number of axis 3 Movement X-Axis Movement 15900 mm Z-Axis Movement 790 mm Y-Axis Movement 500 mm Dujdpfx Ajx I S Rqocxop This 3-axis GRABENER Single-sided sheet metal edge milling machine was manufactured in 1984. It features a powerful 50 kW DC motor, spindle speeds up to 500 rpm, and a maximum torque of 2,000 Nm. The machine offers extensive travel capabilities with 15,900 mm on the x-axis and rapid traverse rates up to 8,000 mm/min. Ideal for precision milling with a swivel range of +/-45°. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Year of construction: 2004, operating hours: 15,800 h, condition: ready for operation (used), General Data Machine weight 3000 kg Duodpfx Ajx D N Amecxop This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine. Application Types Sawing

Year of construction: 2007, condition: ready for operation (used), General Data Machine weight 14750 kg This 3-axis Friggi VTS 4100 X 1500 X 1200 HS was manufactured in 2007. It features a maximum blade length of 11470 mm and blade dimensions of 41 x 1.3 mm. The band rotation speed ranges from 400 to 2300 m/min, and the blade motor power is 45 KW. If you are looking to get high-quality cutting capabilities, consider the Friggi VTS 4100 X 1500 X 1200 HS machine we have for tact us for more information. Application Types Sawing Dodpfx Aox D Hrxecxsup

Year of construction: 2019, condition: ready for operation (used), Additional Equipment Starter Kit 1 consisting of 2 circular saw blades and 10 liters of coolant concentrate. Leveling element (1 set = 4 pieces) with stud bolt M 12x100. Feed side – left. Feed roller conveyor URB 290, Length 3000 mm. Feed adapter for URB 290/400. Outfeed roller conveyor URB 290, Length 2000 mm. Removal adapter for URB 290/400. Connecting piece for machine, attachment on the right. LM 55 M/man. Length stop, Measuring length 2000 mm. Duodpex Nr Sqefx Acxep This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information. Application Types Sawing

Condition: good (used), Year of construction: 2008, functionality: fully functional, Westeria Underfloor Chain Belt Conveyor Manufacturer: Westeria Year of manufacture: 2008 Motor: 5.5 kW Feed section length: approx. 7385 mm Duedpfjynhh Rex Acxop Incline section length: approx. 8400 mm Gooseneck: 1100 mm Usable width: 1200 mm Incline: 28° Note: The conveyor belt was dismantled from ongoing operation.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Dsdpfx Aoviwdmscxeup Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: ready for operation (used), Belt Conveyor Metso Brand: Metso 2 piece on Stock: *1x A-A  length = 11.500 mm, Beltwidth: 1300 mm, Flat Version. Driving: 7,5 kW gearbox. *1x A-A  length = 20.000 mm, Beltwidth: 650 mm. Djdpfx Asxnnc Hscxeup Driving: 7,5 kW gearbox.