Used Mep Mini Syntax for sale (133)

Condition: used, Year of construction: 2007, MEP Shearline Flexiplus Very good condition, stored, only 1,000 hours of operation Year 2007 Cutting capacity: up to 36 mm Gkjdpfx Abeymb T Djisd Cutting capacity: Up to 36 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Cutting capacity 90° round: ø250 mm Cutting capacity 90° rectangular: 280 x 220 mm Gsdpfezi Acksx Abiekd Cutting capacity +45° round: ø230 mm Cutting capacity +45° rectangular: 220 x 200 mm Cutting capacity -45° round: ø200 mm Cutting capacity -45° rectangular: 200 x 140 mm Cutting capacity +60° round: ø120 mm Cutting capacity +60° rectangular: 140 x 80 mm Miter range: -45° to +60° Saw blade: 2950 x 27 x 0.9 mm Blade speeds: 36/72 m/min Working table height: 285 mm Featured with: Semi-automatic band saw, Hydraulic clamping Country of origin: Italy Motor power: 1.5/1.8 kW Machine (L×W×H): 165 x 115 x 180 cm Machine weight: 475 kg

Condition: good (used), Industrial automatic circular saw, MEP brand, Tiger 352 NC 5.0 model, year 2016. Gjdpfo Ahpw Tex Abiokd

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Automatic auger chip remover Gkodpfx Astva Nhobied Blade size: 2950x27x0.9 Choice of cutting speed with inverterr: from 15-100 m/min Capacity: round 230mm, square 230x230mm Year: 2015 Possibility of cuts also in semi-automatic mode The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables.

Condition: used, operating hours: 16,158 h, Rebar Bending Machine, MEP FOCUS 12 Rebar Bending Machine, Used Machine Manufacturer: MEP S.p.A., Italy Model: FOCUS 12 Year of manufacture: 2006 Overall dimensions: MEP bending machine: Width: 3660 mm Depth: 1620 mm Height: 2350 mm Decoiler: Width: 4820 mm Depth: 1980 mm Height: 1460 mm Bending capacity: 6–12 mm Accessories: 5 pcs wire coils 1 pc 8 mm bending tool Programmability: One of the major advantages of the "Focus" series is that the bending angles can be set via an electronic control panel. There is no need to manually adjust mechanical stops as on older Hungarian machines. This significantly speeds up production when, for example, 100 identical stirrups need to be bent. The control system retains its programs even if the machine remains without power for months or even years. The software runs on a dedicated computer. Godpfx Abozaq Dleiskd MEP provides full service and technical support for all of its machines, regardless of their year of manufacture.

Condition: used, MEP-OMES Structural Steel Cutting Machine, Hydraulic Cutting Machine, Used Machine Manufacturer MEP SpA (OMES) – Italy Model Superflex 40/2/12 (with 12-meter measuring and feeding roller conveyor) Overall Dimensions Width: 13,900 mm Depth: 2,750 mm Height: 2,400 mm Technical Specifications Cutting Capacity: Ø 8 mm – Ø 40 mm Gkjdpfx Abozgh Dzoisd Cutting Length: Minimum 600 mm – Maximum 12,000 mm Drive System: Heavy-duty hydraulic cutting system Cutting Accuracy: ±1 mm/m with electronic programming and anti-slip feeding system Material Handling: Linear material flow with integrated roller conveyor and sorting table

Year of construction: 2001, condition: used, Max. saw blade diameter: 350 mm Pneumatic material clamps Gksdpfjygin Nox Abied Table rotateable left and right Manual feed

Condition: reconditioned (used), Year of construction: 2020, Used MEP Shark 350 NC HS 5.0 automatic band saw Blade dimensions: 4640x34x1.1mm Blade speed: 15-115 m/min (inverter) Automatic blade tensioner: 1600kg Gksdpfx Abewwr Tqsiod Automatic chip conveyor Adjustable clamping pressure Cutting capacity: round 350mm, square 350x350mm Year of manufacture: 2020 Machine dimensions: 3045x2025x(H)2225mm Weight: 2800kg

Condition: used, Year of construction: 2009, functionality: fully functional, For sale is a used, fully functional semi-automatic miter band saw. 0° 330 mm 320 mm 450 x 320 mm + 45° 320 mm 300 mm 300 x 300 mm + 60° 210 mm 200 mm 200 x 200 mm - 45° 320 mm 300 mm 300 x 300 mm - 60° 210 mm 200 mm 200 x 200 mm Max. vise opening 455 mm Blade size 4500 x 34 x 1.1 mm Saw blade motor power 4.0 kW - three-phase Blade speed 15 - 100 m/min Accessories: 4.5 m roller conveyor, various saw blades Godpswigavefx Abiskd

Condition: used, functionality: fully functional, saw blade diameter: 350 mm, total length: 2,720 mm, total height: 1,740 mm, total width: 1,460 mm, overall weight: 560 kg, Automatic Metal Circular Saw MEP COBRA AX • Cutting angles: 90°, 45° left, 45° right • Cutting capacity (90°, round tube): 105 mm • Cutting capacity (90°, rectangular tube): 180×70 mm • Cutting capacity (45°, round tube): 105 mm • Cutting capacity (45°, square tube): 95 mm • Cutting capacity (45°, rectangular tube): 135×60 mm • Saw blade diameter: 350 mm • Saw blade bore: 32 mm • Automatic lubrication • Operation modes: manual or automatic • Pneumatic material feed • Total power requirement: 2.29 kW • Dimensions (L x W x H): approx. 2720 x 1460 x 1740 mm • Machine weight: approx. 560 kg Description: For sale is a bandsaw / metal bandsaw in good used condition. The machine operates flawlessly and is ready for immediate use. Upon request, we can provide a video demonstrating the machine in operation. Location: D-89350 Dürrlauingen Price: €1,450 EXW The saw is sold under the margin scheme according to § 25a UStG – therefore, VAT will not be shown separately. Gkedpey Rmcaofx Abied Delivery can be arranged within a radius of up to 400 km by agreement. If you are interested or have any questions, please feel free to get in touch. Viewing by appointment is possible.

Condition: used, Year of construction: 1990, functionality: unexamined, total length: 1,050 mm, total height: 2,000 mm, total width: 1,800 mm, overall weight: 550 kg, space requirement height: 2,000 mm, space requirement length: 1,050 mm, space requirement width: 1,800 mm, -KOM 3178- Here, we offer a fully automatic metal saw from the manufacturer MEP. The saw is in good optical condition. In addition to the automated operation, the saw can also be operated manually. The maximum clamping width of the workpiece is approximately 150 mm. The recommended saw blade diameter varies, depending on the profile, between 315 and 350 mm. Manufacturer: MEP Type: Tiger 350 AX Total weight: approx. 550 kg Gedpfx Aeyykivobiskd Space requirements: Width: approx. 1800 mm Height: approx. 2000 mm Depth: approx. 1050 mm

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 240 mm capacity 45 degrees: flat 240 x 160 mm capacity 60 degrees: round 160 mm capacity 60 degrees: flat 150 x 150 mm band speed 15 - 100 m/min dimensions of saw-band 3650 x 27 x 0.9 mm Control MEP CNC total power requirement 2.2 kW weight 1200 kg The MEP SHARK 331 DIRECT is a state-of-the-art, electro-hydraulic automatic bandsaw of the highest caliber. It has been specifically developed for the high-precision cutting of solid materials, pipes, profiles, and metal bars. Thanks to its extremely robust construction and maximum flexibility, it adapts perfectly to any industrial production process. CNC electro-hydraulic automatic bandsaw featuring: * Automatic mode – for fully automated series production * Semi-automatic mode – for controlled individual cuts Technical Highlights & Industry 4.0 Readiness - Direct control technology: * Makes the sawing machine fully digital, networked, and ready for . Seamless integration into automated production lines - Intuitive 10" touchscreen display: * The completely redesigned user interface minimizes staff training time and . ensures smooth process management. - Integrated cutting library: * Once the material dimensions, type, and thickness are entered, the control . system automatically suggests the best saw blade, the ideal cutting speed, . and the optimal force parameters. The operator, however, retains full manual . control at all times. - IIoT-ready & real-time support: * Real-time data transmission enables predictive maintenance, minimizing . downtime. If necessary, technical support can access the control system . directly via secure remote access—no VPN required. - Future-proof safety: * The machine already complies with the stringent safety and efficiency . standards set for 2027. - Massive data storage: * Capacity for up to 100,000 programs and 9,999 cutting sequences. Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) - MEP CNC "DIRECT" control technology * User interface with an intuitive 10" touchscreen display * Includes mechanical buttons * Ensures reliable, simple, and intuitive operation * Real-time monitoring of all cutting parameters * Swivel-mounted arm for convenient and safe operation Gkjdpfx As Afzuuebisd * Display and logging of alarms and error messages * Massive data storage: up to 100,000 programs and 9,999 cutting sequences - Miter cuts—possible on one side up to 60° - Protective enclosure for operator safety - Infinitely variable adjustment * Cutting speed from 15 to 100 m/min * Controlled via frequency converter (inverter) - Latest-generation hydraulic power unit * Highly efficient with low energy consumption - Material feed via stepper motor and recirculating ball screw * Mounted on opposing ball bearings * 600 mm single-stroke capacity, repeatable for cutting any desired length - Coolant tank integrated into the machine base - Chip-clearing brush - Bi-metal saw blade suitable for solid and profile materials - Tools and operating manual, including a spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = ± 0.1 mm per feed stroke Information from the manufacturer – please note: If this saw is installed in a system equipped with a residual current device (RCD/GFCI), i...

Condition: used, Year of construction: 2003, saw blade diameter 300x32x2,5 mm capacity 90 degrees: round 10-90 mm capacity 90 degrees: flat 80x10-80 mm capacity 90 degrees: square 10-80 mm Cutting range at 90 degrees: round - solid materia 10 - 40 mm Cutting range at 90 degrees: flat - solid material 40x10-40 mm Cutting range at 90 degrees: square -solid materil 10- 40 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg dimensions of the machine ca. 2590x1910x1910 mm Accessories: -Footswitch with emergency stop Gksdpfx Ajyv Nvtjbied -Micro spraying device -HM circular saw blade 350 mm

Condition: used, Year of construction: 2004, cutting diameter 120 mm saw blade diameter 370 mm vice 190 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round 110 mm capacity 45 degrees: flat 125 x 95 mm capacity 60 degrees: round 90.0 mm capacity 60 degrees: flat 90 x 95 mm dimensions of saw-blade 370 x 32 x 2,5 mm cutting speed 15 - 150 m/min engine output 3.0 kW weight 640 kg range L-W-H 900 x 1500 x 1910 mm New price ~ 16.000 euros - in checked condition - machine video - ?v=gxj5GWtTcDE Furnishing : Gjdpfxsxabrxj Abijkd - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual

Condition: new, Year of construction: 2023, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height 860 mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Display Model Current list price: 55,910 euros Fully automatic band saws with a two-column guide system for production cuts, particularly in materials that are difficult to machine and solid stock. With this machine, MEP offers you a machine that is at the highest technical level and, thanks to the use of the highest-quality materials, features an unmatched, robust, and torsionally rigid structure. An extremely robust saw frame made of gray cast iron provides the necessary stability, which leads to impressive cutting results, and the sturdy gray cast iron columns on which the saw frame glides via preloaded linear guides ensure ensure the highest cutting precision even under maximum load. The modern machine control system (MEP NC 5.0) offers the user maximum ease of operation and ensures trouble-free operation. (Monitoring/Evaluation/Correction in real time) MAXIMUM PERFORMANCE > The two operating modes (semi-automatic and automatic) enable efficient cutting under all conditions. > The control system allows for the storage of up to 100 cutting programs, each with different quantities and lengths, and minimizes programming time for frequently executed jobs. > The automatically detected starting position of the saw head reduces the setup time. > The saw headâ??s feed via linear guides driven by hydraulic cylinders with preloaded ball screws ensures reduction of mechanical vibrations during cutting and greater stability. > The automatic alignment of the front saw blade guide head based on the dimensions of the bars to be cut reduces processing time. > Saw blade tension is controlled by the brushless motor and is constantly monitored and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE Gkjdpelf Tu Ujfx Abied > The feed system, with a 600 mm stroke, is repeatable and cuts all lengths. > The vertical roller pair allows for holding and aligning any type of bar or bundle that is fed into the machine. > The vector drive for stepless adjustment of the blade speed from 15 to 100 m/min enables the cutting of any material. > The motorized chip conveyor can be mounted to the right or left of the cutting area . FEATURES: Fully automatic control â?? NC 5.0 - Innovative (Windows CE-based) touchscreen control with additional soft- touch buttons for frequently used functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via a servo valve , constant monitoring of the preselected torque 4, and with precise feed rate adjustment in millimeters per minute 5 -Adjustment/preselection of the continuously variable band speed in m/min. -Band saw tension with tension monitoring and display via an electronic converter -Automatic detection of the start of the cut -Large 7" color touchscreen for displaying and selecting all machine functions and parameters, and programming in seconds. Display of detailed alarm and error messages -Numerous special functions, including executing various lengths and quantities (10 programs) as a sequence, clean cut, step-by-step execution, and much more. -Sturdy, torsion-resistant, and low-vibration saw frame made of cast steel -Carbide band guides for maximum cutting precision, hinged for easy saw band replacement -Large, adjustable cast steel idler ...

Condition: excellent (used), functionality: fully functional, Blade inclination -45° / +45°. Maximum vise opening 180 mm Maximum non-feedable length 385 mm Gksdox Hw Sqjpfx Abijd Disc size 350 mm Blade rotation speed 1700 / 3400 rpm - 2 speeds

Condition: good (used), Year of construction: 2002, MEP automatic bandsaw Model Shark 320 AXI Year : 2002 Capacity round : 260 mm. Capacity 45 / 60 degrees : 230 mm. / 150 mm. Capacity square. : 320 x 220 mm. Speed: 40 - 80 m./min. Gkodpfx Abjyvzvxoied

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Gkjdpfx Abouwrv Doijd

Condition: good (used), Year of construction: 1985, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm Gjdpfx Ajz Hwc Robiekd -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Condition: used, Year of construction: 2000, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm stroke 100 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 / 30 / 45 / 90 m/min total power requirement 2,6 kW weight of the machine ca. 375 kg dimensions of the machine ca. 1000 x 950 x 1800 mm Features: Gksdev Rrruspfx Abied - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions

Condition: like new (used), Semi-automatic, electro-hydraulic band saw Gkedszlimbepfx Abiod Blade dimensions: 2950x27x0.9mm The saw is suitable for cutting solid metals and metal profiles with medium cross-sections up to 280x200 mm at an angle of 0°; Cutting angle range: from 0° to 60° to the left; WITH ADDITIONAL EQUIPMENT - manual and manually dynamic cutting cycle Year of manufacture: 2025

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t dimensions of the machine ca. 900 x 700 x 1600 m Gjdpfel R Nnnjx Abiokd Manual cold circular saw with: - Machine base - Support rail 1500mm

Condition: used, Straight-Cut Cutting Bench 40, manufactured by MEP Number of bars: - n.1 Ø 40 Godpfovtx Eyox Abiekd - n.2 Ø 32 - n.3 Ø 26 - n.4 Ø 20 - n.5 Ø 16 22 Fy= 600 N/mm - ft= 650 N/mm Minimum cutting length: 800 mm Maximum length: 12.000 mm Measurement tolerance: +/- 1 mm/m Max. speed positioning: 2m/s Measurement evacuation speed: 2,2 m/s Number of compartments: 5 + 5 Minimum cutting length: 800 mm Maximum length: 12.000 mm Measurement tolerance: +/- 1 mm/m Max. speed positioning: 2m/s Measurement evacuation speed: 2,2 m/s Number of compartments: 5 + 5

Year of construction: 2002, condition: good (used), MEP CONDOR 90 CNC MR automatic CNC-controlled miter saw for cutting aluminum profiles, with automatic feed. Used, in excellent condition. Gedpfeikztpox Abijkd

Condition: used, Year of construction: 2001, saw blade diameter 350 mm 190 mm Gkjdeyvvpmspfx Abijd speeds 15 / 30 / 45 / 90 U/min power requirement 1,8 / 2,6 kW kW