Used Melcher Dc Dc Converter for sale (5,227)

Condition: ready for operation (used), Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible. Dkodsylzhrepfx Acxei

Condition: as good as new (ex-display), Lorch Handy TIG 180 DC ControlPro 230 V Lorch Weld Back Pack Carrying Frame – portable electrode inverter welder with top-class welding characteristics, ideal for assembly, construction sites, or workshops. Fastpulse up to 2 kHz for thin stainless steel sheets and pipes. HF ignition, 2/4-stroke operation, fast tack welding. Current reduction prevents burn-through when overheating, Hotstart ensures perfect ignition, Anti-Stick system prevents electrode from sticking, storage for 4 jobs. Technical specifications: Mains voltage: single-phase 230 V, 50 Hz; TIG current range: 3 - 180 amps; Electrode range: 150 amps. Duty cycle TIG: 180 amps at 30% duty cycle (40°C), 150 amps at 60%. Electrode: 140 amps at 60% duty cycle. Protection class: IP 23; Approval: S-mark; Weight: approx. 6.5 kg. Scope of delivery: cable, gas hose, and operating manual, without accessories. Dksdpfx Aeyhpmhocxji

Condition: as good as new (ex-display), warranty duration: 12 months, type of cooling: water, hose package length: 8,000 mm, electrical fuse: 32 A, DGUV certified until: 02/2027, sheet thickness aluminum (max.): 10 mm, Primary switched-mode power source, welding characteristics of absolute top class, fully digital process control, CAN bus system, digital high-frequency ignition device with process-controlled ignition sequence, parameter database, Tiptronic for saving and recalling 100 jobs, demand-controlled cooling circuit, liquid-cooled torch, user dialogue with plain text display. Technical data: Mains voltage: 400 Volt; Fuse protection: 16 A slow-blow; Adjustment range: 3 - 300 Amps; Open-circuit voltage: 10 - 60 V; AC frequency: 30 - 20 Hz; AC balance: 10 - 90%. Welding current DC: 300 A (20°C) - 250 A (40°C) 100% duty cycle, same for AC-DC: 300 A (20°C) - 250 A (40°C) 100% duty cycle; Welding current DC: 300 A (20°C) - 300 A (40°C) 60% duty cycle, same for AC-DC: 300 A (20°C) - 300 A (40°C) 60% duty cycle. Power factor: 0.99. Protection class: IP 23 EN 60529 / IP 23. Cooling type: F. Weight: approx. 108 kg. Scope of delivery: Torch cable and user manual. Dksdpfeyhpldex Acxoi

Condition: good (used), Inverter frequency converter VACON X - Series - 4 pcs. 1 Type: VACON X 4K 400400C - 2 pieces 2 Type: VACON X 4K 40075C1 - 1 piece 3 Type: VACON X 4K 40075C Dkedpfsu U Ik Nox Acxsi

Condition: new, Year of construction: 2015, For sale 7 pallets / 5700 kg with strip steel Nickel plated DC 01/LC 0,700mm x 28,00mm new price 1850,-€ /1000kg Pick up by yourself or forwarding agent. We are happy to assist you in organising a cost-effective forwarding agency. You are welcome to come by for a tour. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Dsdpofyfrrefx Acxski If you have any questions you can contact us by phone. Visit our shop and have a look at our other offers. Company names and trademarks are the property of their owners and are used only for identification and description of the products. The installation and electrical connection of the machine / device must be carried out and checked by a trained specialist. Deviations from technical data as well as errors in the description of the article can happen and are reserved. Shipment is exclusively to traders - for private consumers only one collection is possible.

Year of construction: 2014, condition: new, DC-Sputtering Power Supply ADL HX 300/1000 Djdpfx Asyk Hkvecxjki Year of construction: 2014 (New, never used) Power: 30 kW (see photo for more technical details)

Condition: used, Year of construction: 2002, SEW Movitrac Frequenzumrichter 31C011-503-4-00 RA1284 Hersteller: SEW Eurodrive Typ: Movitrac 31C011-503-4-00 Zustand: gebraucht/ geprüft/ voll funktionsfähig Dsdpfxjk Abqqo Acxski Version: 011-503-4-00 Preis: zzgl. MwSt. ab Zentrallager Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Condition: used, Year of construction: 1992, spindle speed (min.): 7,500 rpm, spindle speed (max.): 24,000 rpm, 4 motorized grinding spindles (liquid-cooled, purge air / oil mist lubrication) including REFU HF frequency converter, e.g. for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as is – manufacturing year approx. 1992 A collection of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request All technical data subject to error or omission. Dedpfx Acsl Tn Afsxoki We sell exclusively to countries within the European Community.

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Dkodpfx Acsyhf R Noxoi Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h

Condition: good (used), Year of construction: 2000, table length . mm table width . mm burner heads . 2 total power requirement . kW Dedpfsqn A Ryox Acxjki weight of the machine ca. 1478 KG

Condition: used, Year of construction: 2008, offer consists of: - high performance-finisher DocuCutter DC-645 Duplo DocuCutter DC-645 high performance-finisher for digital color printing: - feeder: air-suction feeder with lining up - operation: by LCD-display - control: barcode control - PC included - saveable jobs: 80 memories for repeat orders - error avoidance: ultrasonic-doublefeed control eject gate testprogram print mark reader - integrated knives: 6 lengthwise knives + 1 cross knife - size: max. 650x370mm min. 210x210mm - paper weight: 110-350g/qm - loading height: 100mm - creasing each sheet: max. 10 - production speed: max. 1500 sheets/h (A4) max. 720 sheets/h (A3) - power: 230V / 50Hz - 0,3kW - dimensions: 2.240x750x1.115mm - weight: 360kg We can also organize the following for you: Dksdpox Afarjfx Acxei packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), Frequency Inverter Make Omron Sysdrive Type 3 G 3XV-AB004-EV2 Dsdpfxjfuv Szj Acxski U:230 V 50/60 Hz Output 3 A 0,4 Kw,230 V

Condition: new, analog speedometer Dedpfx Acebntx Rsxjki 400 volt unused

Condition: good (used), Year of construction: 2002, functionality: unexamined, SAW Welding System (Submerged Arc Welding/SAW) with Process Controller A2–A6 and ESAB LAF 635 DC Year of manufacture: 2000 Condition: good, operational (from educational institution) For sale is a powerful submerged arc welding system (SAW) consisting of an ESAB DC power source LAF 635 and A2–A6 Process Controller (depending on version, PEH/PEK system). The system originates from an educational institution and was primarily used for training purposes – typically well maintained and regularly inspected. Ideal for automated/mechanized submerged arc welding, e.g., in steel construction, tank manufacturing, pipe/profile fabrication, cladding (depending on welding head/tractor/gantry – if available). Technical Data – ESAB LAF 635 DC (Power Source) Type: remotely controllable 3-phase DC welding power source for SAW and mechanized MIG/MAG Mains connection: 400/415 V, 3~ 50 Hz (alternatively 440 V, 3~ 60 Hz) Dksdpex Ru Tgefx Acxoi Duty cycle: 630 A / 44 V at 100% Adjustment range: 75 A / 18 V up to 800 A / 44 V (46 V) Open-circuit voltage: 54 V Idle power consumption: 150 W Efficiency: 0.84 Power factor (cos φ): 0.90 Protection class: IP23 Weight: approx. 260 kg Dimensions (L × W × H): 652 × 483 × 800 mm (or 652 × 483 × 916 mm incl. base) Fusing/Mains data (reference value as per manual): e.g., 63 A slow-blow, supply line 4 × 16 mm², mains current at 100% load 52 A (at 400/415/440 V) Technical Data – A2–A6 Process Controller (PEH / A2–A6) The A2–A6 Process Controller is used for process control/regulation of the mechanized welding system and is designed for SAW welding. Rated voltage (supplied via power source): 42 V AC, 50/60 Hz Rated power: max. 900 VA Motor connections: for ESAB A2 or A6 motors Motor current: 5 A continuous, max. 10 A Wire feed control: internal EMF control or with AC tachometer (6 pulses/rev) Condition & Origin Good, well-maintained condition (training/educational environment) System is fundamentally designed for industrial use (mechanized SAW / MIG/MAG) ESAB LAF 635 DC Power Source A2–A6 Process Controller (operation/control unit)

Condition: used, Schuppenauslage - Stream delivery MBO AS540-DCSerial-No. Q02/93 Online-Video-Inspection by Skype-Video Dodpfxoh Axqio Acxeki We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2011, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. offer consists of: - high performance-finisher DocuCutter DC-645 Duplo DocuCutter DC-645 high performance-finisher for digital color printing: - feeder: air-suction feeder with lining up - operation: by LCD-display - control: barcode control Dksdpfsu Sr Szjx Acxji - PC included - saveable jobs: 80 memories for repeat orders - error avoidance: ultrasonic-doublefeed control eject gate testprogram print mark reader - integrated knives: 6 lengthwise knives + 1 cross knife - size: max. 650x370mm min. 210x210mm - paper weight: 110-350g/qm - loading height: 100mm - creasing each sheet: max. 10 - production speed: max. 1500 sheets/h (A4) max. 720 sheets/h (A3) - power: 230V / 50Hz - 0,3kW - dimensions: 2.240x750x1.115mm - weight: 360kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 1973, machine/vehicle number: 2007, Short description: - Including splicing table - Machine documentation available Dkedpfow Rlnajx Acxei Last intended use (Jan. 2024): - Application-based product testing of polyester slitting converter cable assortments - For assessing running characteristics under constant machine settings - 1.9-6.7 dtex - 2x80ktex-2x120ktex - Collection in can - Accessories/spare parts partially available The machine has been dismantled and stored, but can be inspected on site. Collection only in 14727 Premnitz by the buyer, no shipping. If interested, we look forward to your offer. Enquiries in writing only, please.

Condition: used, Equipment: type plate available, Powerful TIG Welding Unit for Professionals The EWM TIG 350 DC FWD is a high-quality, water-cooled DC TIG welding unit from EWM, engineered for demanding applications in metal construction, industry, and professional workshop environments. This high-performance machine enables precise DC TIG welding with up to 350 A welding current and offers superior arc stability, high weld quality, and efficient cooling – ideal for steel, stainless steel, nickel alloys, copper materials, and other metal workpieces. 🔧 Welding Performance and Technology Direct current TIG welding (DC) with an adjustable range up to approximately 350 A – powerful penetration and precise control. Robust inverter electronics ensure stable arc performance and high efficiency. The water-cooled design allows continuous operation even under heavy-duty conditions. ⚙️ Features and Operator Comfort Proven operation with an intuitive control panel – easy adjustment of welding parameters. Connection options for remote control and torch functions for added convenience. Splash-proof housing rated to IP23, suitable for tough workshop environments. Dodpsyililofx Acxski Energy-efficient operation thanks to high efficiency and standby function. Dimensions: 1000 x 520 x 900 mm Weight: approx. 180kg All information subject to change or errors.

Condition: used, Year of construction: 2017, operating hours: 353 h, Empty weight: 4.958 kg Dkedpfxsx R T Rqj Acxoi Please contact Emal Jaweed for more information

Condition: used, Year of construction: 2017, operating hours: 1 h, Empty weight: 4.958 kg Please contact Emal Jaweed for more information Dkodpex R T Ehefx Acxji

Condition: used, mileage: 19,387 km, power: 96 kW (130.52 HP), first registration: 05/2024, fuel type: diesel, fuel: diesel, CO₂ emissions: 254 g/km, color: grey, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 6, loading space length: 2,410 mm, loading space width: 2,140 mm, Year of construction: 2024, Equipment: Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, parking heater, power mirror, seat heater, start-stop system, trailer coupling, = Additional Options and Equipment = - Automatic dipped beam headlights - Heated exterior mirrors - Passenger airbag - Electric front windows - Euro 6 - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable front seats - Centre armrest - Multifunction steering wheel - Fog lights - Radio with DAB+ - Reversing camera - Heated driver's seat - Immobiliser - Bluetooth telephone connectivity - Heated windscreen - Xenon lighting = Further Information = General Information Number of doors: 4 Model year: 2026 Cab type: Double cab Technical Information Dedjydm I Ispfx Acxeki Number of cylinders: 4 Engine displacement: 1,995 cc Dimensions Length/height: L2H1 Weights Unladen weight: 2,101 kg Payload: 1,039 kg Gross vehicle weight: 3,140 kg Max. towing weight: 2,350 kg (unbraked 750 kg) Interior Interior colour: Black Maintenance, History and Condition APK (Roadworthiness test): valid until 05/2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: like new (used), EWM acticARC Tetrix T352 AC/DC Robotic WIG/TIG - Welding machine with cool cooling unit Very good condition Used very little Dkedpjyilubefx Acxsi Collection in 74722 Buchen. Shipping within Germany possible for €100 gross. Used equipment – normal signs of use, but fully operational. Further details and pictures available on request.

Condition: ready for operation (used), A rack for DC power modules with two electrical housing units is available. Power module Phoenix Contact Charx Power 30kW, max. voltage AC/DC: 3x 530V/1000V, rated power: 30kW, efficiency: over 95%, dimensions X/Y/Z: approx. 483mm/134mm/550mm, weight: approx. 31kg. Including two electrical housing units. Documentation available. On-site inspection is possible. Dodpfx Acju Iztmoxski

Condition: ready for operation (used), Two nearly identical Rofin laser machines are available. Wavelength: 10600nm, operating power: 4kW, max. pulse power: 8kW, pulse duration: 0.5ms, laser type: CO2 slab laser, cooling: diffusion cooling, max. pulse frequency: 5000Hz, polarization: linear, excitation: RF, gas type: premix. Machine dimensions X/Y/Z: approx. 2300mm/1000mm/1900mm, weight: approx. 1700kg. Documentation available. On-site inspection is possible. Dkedpfx Asydp Auecxji

Year of construction: 2015, condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Dodpfx Aev Extbocxoki