Used Martin T 70 for sale (96)

Year of construction: 1968, condition: ready for operation (used), Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement. Isdpox Th Ngsfx Akpetn

Condition: good (used), Year of construction: 1995, Panel saw Manufacturer: Martin Model: T72 Year of manufacture: 1995 - When the machine is switched on, the control display takes approx. 15 minutes to show any information. - The flat belt for the scorer is missing. Needs to be replaced. - The pneumatic clamping of the parallel fence does not clamp. Itsdpoy A I Nrsfx Akpon Carriage length: 3,300 mm Cutting width: approx. 1,200 mm Cutting height: approx. 170 mm Saw blade diameter: max. 500 mm Power: 5.5 kW Speed: 2,800 / 4,000 / 5,500 rpm Scorer: Yes Motor brake: Yes

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Iedpfxeyymtde Akpjtn Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Iedpfx Akez A Hhuspotn

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Itjdjzvfm Ejpfx Akpen • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.

Condition: used, Martin t60 panel saw carriage: 330 cm, tilt: 0-45 degrees, and motorized adjustment of the blade height, sliding table on the right side, manually adjustable up to 1250 mm with an electronic display, 3-axis scoring saw, electrically adjustable, scoring saw that extends and retracts pneumatically, main motor: 5.5 kW, 3 cutting speeds, max. blade diameter: 400 mm. Isdpezzdi Nsfx Akpstn

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Itsdpfsqlclbox Akpsn Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm Iodpfx Aownbfkokpstn -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Condition: used, Martin t60 panel saw carriage length: 510 cm, tilting angle: 0-45 degrees, with motorized blade height adjustment, Iedpfxszlnmgo Akpetn rip fence on the right side, manually adjustable up to 1200 mm with an electronic display, 2-axis scoring saw, electrically adjustable, scoring saw extending and retracting pneumatically, main motor: 5.5 kW, 3 cutting speeds, maximum blade diameter: 400 mm.

Condition: used, Year of construction: 2014, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,000 rpm, total length: 2,800 mm, total width: 2,100 mm, total height: 1,700 mm, overall weight: 900 kg, Equipment: CE marking, saw blade guard, scorer, No. 04540 Sliding table saw Martin TC 660 Used, year of construction 2014 Sliding table length 2600 mm Max. saw blade diameter 400 mm Cutting width 1250 mm Speeds 3000 / 4000 / 5000 rpm 2-axis scoring unit with manual adjustment Manual saw blade tilting 0° - 46° Electric cutting height adjustment Crosscut table approx. 1250 x 700 mm LW Tiltable crosscut fence extendable up to 3200 mm Ijdpfx Akezmgkaopstn Saw blade guard can be swung away CE-compliant Incl. operating manual as a .pdf-file Transport dimensions approx. 2800 x 2100 x 1700 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: reconditioned (used), Year of construction: 1981, machine/vehicle number: 116680, functionality: fully functional, Rated power: 380 V, 11 A Planing width: 630 mm Planing height: 250 mm Feed rate: 8-20 m/min Dust extraction port: 160 mm Weight: approx. 870 kg Rubber-coated infeed and outfeed rollers Two-knife cutterhead with strip planing knives Itsdpsh U A Evofx Akpen Central lubrication Planing height adjustable via handwheel Star-delta switch

Condition: used, Year of construction: 1990, with Tersa cutter shaft Machine in working order completely set up used good condition cleaned functionality tested partially refurbished Manufacturer: Martin Type: T43 Year of manufacture: 1990 Machine no.: V 177666 GS-tested GS-tested for wood dust Segmented pressure beam Rubber feed roller Rubber extraction roller Feed rate m/min: 6 9 12 18 m/min Number of cutters: 4 automatic motor brake Tersa reversible cutters Itedpfxezg Nl To Akpen Digital display for planing height electric height adjustment with tip fine adjustment Motor kW: 5.5 Planing width approx. mm: 630 Planing height approx. mm: 250 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 1200x1250x1200 mm Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in current condition as inspected, without warranty

Condition: used, Used Machine Features and Technical Specifications: - Table size: 800 x 1000 mm - Table opening diameter: 480/380/170/125 mm - Milling spindle taper: MK 5 - Milling spindle speed: 3000, 4500, 6000, 9000 rpm Itsdjzlbqxspfx Akpjn - Milling spindle height adjustment range: 150 mm - Distance from center of milling spindle to front edge of table: 400 mm - Maximum allowable tool diameter: 250 mm - With wooden stop jaws (can be replaced with metal stop jaws upon request) - With a wooden Her 3 roller feed mechanism - With heavy-duty sliding table; runs on ball bearings along guideways milled to be absolutely parallel Dimensions: 205 x 130 x 150 cm Weight: approx. 800 kg

Condition: used, Martin T60c sliding table saw 5.5 kW motor, Ijdpfozg U Hiex Akpotn 430 cm carriage, Right-hand side adjustable with a motor to 840 mm, Max. blade diameter: 400 mm, Tilt 0-45 degrees, adjustable with a motor, Blade height adjustable with a motor.

Condition: excellent (used), Angle adjustment Speed control Central spindle lubrication 5 kW motor Spindle diameter 30 mm Table length 240 cm Table width 35 cm Support extendable up to 80 cm Iodpfx Aswtl N Dskpotn Request more information

Condition: excellent (used), Motor 9.5 kW, spindle 30 mm, table length 240 cm, width 35/120 cm Isdpjyy Np Iefx Akpotn

Condition: used, Second-hand Martin T72 A panel saw for professional cutting work in woodworking. The machine is suitable for typical panel cutting and sawing tasks when working with wood-based materials. Technical data: - Cutting height: ~ 145 mm - Cutting width: ~ 1,300 mm - Cutting length: 3,300 mm - Tilt angle: 45° - Stop: Digital - Adjustment: Electronic Itsdpjzrywwefx Akpon - Rip fence: Manual

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: V 435496, functionality: fully functional, cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, cutting length (max.): 3,700 mm, length stop: 3,200 mm, Equipment: scorer, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting length: 3,700 mm Max. cutting width: 1,100 mm Cutting width at rip fence: 1,100 mm Max. cutting height: 170 mm Max. cutting height with scorer: 170 mm Saw blade diameter: 450 mm Length stop: 3,200 mm Sliding table length: 3,700 mm Sliding table width: 450 mm MACHINE DETAILS Isdpjx Dkp Iefx Akpstn Total weight: 1,800 kg Connected load: 7.5 kW (10.20 HP) Extraction port diameter: 120 mm EQUIPMENT Motor brake Scorer unit Digital cross table Digital length stop 3-axis electric scorer unit 400 mm adjustable hood arm 3.70 m edging length Laser cut line indicator Template holder Pneumatic folding circular saw fence Second support

Condition: used, 3200mm carriage Iodpfxoyf Epto Akpetn Tiltable blade with hydraulic rise and fall Cutter 380V Sold as is without inspection

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers Itedpfx Astxirfekpjn for 3 m sliding carriage

Condition: used, Planer MARTIN T51 - used - noise-insulated table lips, fence bar, motor brake ----- Technical data ----- Planing width: 51 mm, Table length: 2,520 mm, Max. cutting depth: 16 mm, Cutterblock diameter: 120 mm, Number of knives: 2 pcs, Fence swivel range: 0-45°, Extraction port: 140 mm, Motor power: 4.8 kW Iedpfx Aexm R Upskpstn

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 66091, input voltage: 380 V, power: 0.37 kW (0.50 HP), type of input current: three-phase, The Martin Mechanic MAS 493/77 is an industrial quilting machine (a special stitching machine) used in the textile industry for quilting and tufting pillows or mattresses. Key technical features of the machine: Application: Specifically designed for heavy-duty materials such as garden cushions, standard pillows, and mattresses. Maximum thickness: Can quilt materials up to 130 mm thick. Quilting function: The machine automatically stitches decorative or reinforcing rings with a diameter ranging from 8 to 18 mm. Itodpfx Ajzzduljkpjn If you are interested, please include your contact information in your inquiry.

Condition: like new (used), 40mm Milling Arbor for Martin Tilting Spindle Moulder T27 Clamping length 160mm, arbor diameter 40mm. With quick-clamping nut. From stock, apparently has never been used. Milling arbor is only suitable for T27, not for T26. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.' Itjdpfx Akswnm U Ropen

Condition: used, functionality: fully functional, Martin Surfacing Jointer 250 x 51 cm, 4.8 kW Motor 2 cutterhead shafts, wedge-shaped guide rails Re-sharpenable jointer knives Adjustable surfacing fence, swivels 90 - 45 degrees With Aigner miter gauge Chip removal 0 - 15 mm Dust extraction port 160 mm Motor brake with switch optional Weight 900 kg Itsdpfxsztz Hpo Akpsn

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Area per shelf: 23 x 30 cm = ± 0.06 m² Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Autres : Iedpfx Akjygndpepetn Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts