Used Martin T 44 for sale (95)

Condition: used, Martin T 60 panel saw Heavy-duty precision panel saw 3-axis positioning control with 5.7-inch touch screen 3-axis scoring saw Fgedpfx Aisz Azxqjvoh Motor: 5.5 kW Saw blade can be tilted from 0 to 46° Motorized saw blade height adjustment Saw blade diameter up to 400 mm Cutting length: 3300 mm Cutting width with parallel guide: 1250 mm Manual adjustment of the parallel guide Parallel guide position can be read on the touch screen Swiveling control panel above the table CE version Machine is WORKSHOP OVERHAULED and in TOP CONDITION Available from stock in Lieboch

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Fsdpjv Erkajfx Aivsgh Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Fsdpfow D T Dkox Aivjgh Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 1982, Planing width: 500 mm Table length: 2840 mm Cutterhead speed: approx. 5000 rpm Adjustability of the fence: 0 - 45° Motor power: 5.5 kW Dust extraction port: 160 mm Machine weight: approx. 950 kg including: toothed table lips console for feed hydraulic adjustment of the planing table Fodpfsz Agu Dex Aivogh NEW planer guard

Condition: used, Year of construction: 1978, used good condition cleaned functionality tested partially refurbished Manufacturer: Martin Type: T76 Year of manufacture: 1978 Machine number: V 102419 Steel guides Fgedpjzkvziofx Aiveh Height adjustment, hydraulic Swivel adjustment, hydraulic Speed Carriage length mm approx.: 3300 Cutting width mm approx.: 1050 Max. blade diameter mm: 400 Swiveling up to °: 45 Dust extraction connection mm: 120 + 80 Space required approx. L x W x H mm: 3400x1800x1500 Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty

Condition: used, Year of construction: 2007, operating hours: 1,650 h, power: 5.5 kW (7.48 HP), cutting height (max.): 130 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 4,000 rpm, total length: 3,200 mm, total width: 2,100 mm, total height: 1,900 mm, overall weight: 1,300 kg, Equipment: CE marking, documentation/manual, scorer, No. 04550 Sliding table saw Martin T 60 CLASSIC Used, year of construction 2007, approx. 1650 operating hours Sliding table length 3000 mm Cutting width 1250 mm Saw blade diameter 250 - 400 mm Saw blade bore 30 mm Max. cutting height 130 mm Motor power 5.5 kW Speeds 4000 / 4800 / 6000 rpm, with digital display Pneumatically controlled 2-axis scoring unit Motor power scoring unit 0.75 kW Electric saw blade tilt adjustment from 0° to 46°, with digital display Electric cutting height adjustment, with digital display Manual cutting width adjustment by handwheel, with digital display Tool-changing system SprintLock Machine operation via touchscreen Various cutting programs, including programs for rebating, grooving, cutting angled strips, slotting and tenoning, as well as chain dimensioning Cross-cut table approx. 1300 x 650 mm LW Extendable cross-cut fence up to 3200 mm, with 2 flip stops 2 extraction ports, diameters 120 and 100 mm Including complete technical documentation, 2 saw blades and 3 riving knives Transport dimensions approx. 3200 x 2100 x 1900 mm LWH Weight approx. 1300 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale Fgedpfx Aijzq Aqwevoh For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1976, without feeding deviceused, good conditionmake Martintype T24year 1976machineNr. 91716Motor 7,5 kW / 10 PS amplifiedMotor 1 speed4 speed steps 3000/4500/6000/9000 hanical brakespindle diameter 30/40 mm x 200 mmtool diameter max. in milling stop 250 mmtable size 1000 mm x 900 mmtable top extension approx. 2400 mmframe support extendableadjustment height ce requirement approx. 2400 mm x 1000 mm x 1400 mmweight approx. 800 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Fgjdpfx Aiovwfiajvoh

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: V 117812, input voltage: 380 V, input current: 11 A, Machine is in very good condition - Electric height adjustment and handwheel adjustment - Newly fitted bearings Fgsdsyt Nx Uspfx Aivjh - New knives installed - Gearbox lubricated - New protective lamellae installed - Planing width: 630 mm - Planing height: 250 mm - Feed speed: 8–20 m/min - Extraction nozzle: 160 mm - Weight approx. 870 kg - Rubber-coated infeed and outfeed rollers - Two-knife cutterblock with strip planing knives - Central lubrication - Star-delta switch

Condition: used, Year of construction: 1981, Working width: 510 mm Fgsdoy Hqdgepfx Aiveh Planer shaft: strip knives Number of knives: 2 Surface table length: 2600 mm Surface table adjustment: hydraulic / foot pedal Concave-convex joint adjustment: yes Chip removal display: scale Concave-convex joint display: scale Surface fence angle adjustable: yes Motor power: 5.5 kW Motor brake: yes, automatic Machine length: 2600 mm Machine width: 1000 mm Weight: 1050 kg

Condition: used, Year of construction: 1979, Working width: 630 mm Planing height: 220 mm Cutterhead: Strip knives Number of knives: 4 Height adjustment: Handwheel Planing thickness display: Scale Feed speed: Infinitely variable Infeed roller: Rubber Outfeed roller: Rubber Table rollers: No Motor power: 5.5 kW Extraction port: 160 mm Machine length: 1200 mm Machine width: 1200 mm Fgjdpfxjy A Hide Aivsh Weight: 1000 kg

Condition: used, Year of construction: 1982, Includes a brand new star-delta switch. Used Good condition Cleaned Functionally tested Overhauled Fedpfozbc D Hex Aivogh Manufacturer: Martin Type: T23 Year of manufacture: 1982 Machine no.: 82468 Motor kW, increased power: 4.7 / 5.7 Swiveling range: 0 - 45° Motorized / mechanical brake: Foot brake Motor, 2 speeds / pole-changing: yes Speed stages rpm: 3 / 4.5 / 6 / 9000 Right-left rotation: yes Table size l x w mm: 1100 x 950 Milling arbor diameter mm: 30 Milling fence with fine adjustment: yes Socket for feed mechanism: yes Dust extraction connection mm: 100 / 120 Space required approx. L x W x H mm: 1100 x 950 x 1100 Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected Without warranty and guarantee.

Condition: used, Year of construction: 1981, power: 5.5 kW (7.48 HP), cutting width (max.): 1,000 mm, tilt adjustment saw blade: 45 °, height adjustment type: hydraulic, saw blade bore: 30 mm, actuation type: hydraulic, rotational speed (max.): 5,000 rpm, Rated power: 380V, 12.8A Main motor: 5.5 kW Sliding table length: 2550 mm Cutting width: 1000 mm Fgedpfsz At Siex Aivsh Adjustable parallel fence, foldable Saw blade speeds: 2800/4000/5000 RPM Hydraulic height adjustment and tilting with foot pedal Cross table with fence Miter gauge Parallelogram guard with narrow hood Dust extraction port: 1x140 + 1x80 mm

Condition: used, Year of construction: 1978, Spindle tiltable: Yes, 0 - 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Fence jaw adjustment: Manual Height display: - Swivel angle display: Scale Fence display: Scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000 rpm Motor power: 5 kW Motor brake: Yes, foot brake Fedpfouzkxfjx Aivjgh Extraction port: 2 x 100 mm Machine length: 1200 mm Machine depth: 1400 mm Weight: 800 kg

Condition: excellent (used), 2 blades Working width: 62 cm Fjdpfezvnzrjx Aivjgh Working height: 20 cm 5.5 kW motor

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Fgodpfx Aoyync Tsivoh Maximum milling tool diameter: 390 mm Maximum tool clamping height: 225 mm Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Max. saw blade diameter: 350 mm Cross-cut saw motor: 0.75 kW Saw blade arbor: 30 mm Sliding table travel: 1270 mm Length stop range: 1750 mm Weight approx.: 740 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 155 mm, cutting width (max.): 1,350 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 1,000 rpm, total length: 3,300 mm, total width: 1,985 mm, total height: 1,510 mm, overall weight: 1,100 kg, table height: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, • Smooth-running saw blade • Cutting width 1350 mm • Precisely operating crosscut table, length 3.3 m • Easy-to-use parallel guide • 7'' touchscreen control panel • Modern SynchroDrive drive technology • Handwheel for positioning the parallel guide • Guide plate holder • Electronic preparation for retrofitting a scoring unit Fodpfx Aozvdwpjivjgh • Standard cross table for length stop for miter cuts up to approximately ± 47° • Table extension at the rear 700 x 855 mm – standard • Weight approximately 1,100 – 1,400 kg

Condition: used, Year of construction: 1991, Slider length: 3300 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 2800 mm Cutting depth: 170 mm Scoring blade: no Saw blade height adjustment: hydraulic Saw blade swivel adjustment: hydraulic Rip fence adjustment: manual Fgsdpfxjzdzbhj Aivoh Saw blade angle display: scale Cutting height display: scale Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 500 mm Speeds: 2800 / 4000 / 5500 Motor power: 5.5 kW Dust extraction connection: 80 and 120 mm Machine length: 4000 mm Machine width: 2200 mm Weight: approx. 1300 kg

Condition: good (used), Year of construction: 1995, Panel saw Manufacturer: Martin Model: T72 Year of manufacture: 1995 Fsdoy A I Nrjpfx Aivegh - When the machine is switched on, the control display takes approx. 15 minutes to show any information. - The flat belt for the scorer is missing. Needs to be replaced. - The pneumatic clamping of the parallel fence does not clamp. Carriage length: 3,300 mm Cutting width: approx. 1,200 mm Cutting height: approx. 170 mm Saw blade diameter: max. 500 mm Power: 5.5 kW Speed: 2,800 / 4,000 / 5,500 rpm Scorer: Yes Motor brake: Yes

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Fgjdez A Hhuspfx Aivjh

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm Fsdownbfkjpfx Aivogh -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Fsdpfeyymtdox Aivsgh Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: used, Year of construction: 2026, New demonstration machine! General technical specifications: Motor power: 5.5 kW (7.5 hp) Infeed table length: 1200 mm Planing width: 500 mm Table height: 850 mm Cutting depth: max. 8 mm Speed: 5000 rpm Outfeed table length: 1640 mm Weight: approx. 1200 - 1250 kg - Operation: Electric cutting depth adjustment with display; concave/convex joint adjustment with display - Fence: Adjustable up to 45° with scale, single-hand operation, and integrated auxiliary fence - Cutterhead guard: Bridge guard - Extraction: Extraction port Ø 160 mm, minimum extraction air volume: 24 m³/min at 20 m/s, vacuum 810 Pa - Tool: TERSA solid steel cutterhead Z4, Ø 125 mm - Feed: Console for mounting a feed device - Electrical equipment: Electronic soft start/stop brake; contact for controlling the extraction; motor protection switch and winding protection, undervoltage protection; lockable main switch, EMERGENCY STOP button; required voltage supply: 3 ~, 400 V, 50 Hz - Emission values: Emission sound pressure level at the workplace LpA according to EN ISO 11202 [dB(A)] - idle noise 77 / operating noise m, with extraction: 88 - Accessories: 1 pair of TERSA knives - standard 510 mm (installed), 1 grease gun with long-life grease, 1 internal hexagon wrench, 1 adjustable wrench, 1 tool for knife changes Special equipment: - Safety device SUVAMATIC - Spiral cutterhead Xplane with 3 spiral knife rows (26 domed carbide knives per row; 2 counter knives), delivery including full knife set and a T-key Torx T20; cutterhead speed 6,000 rpm included. The emission sound pressure level LpA is reduced by 8 dB(A) during machining. - Control panel combined and moves with the fence. The optional control panel offers maximum ease of use and overview, as the controls move with the smooth-running fence; the ON/OFF button for the cutterhead, the EMERGENCY STOP button, the electric cutting depth adjustment with digital display, and the electronic concave/convex joint display are within easy reach and in the best viewing position. Fgedpfx Asz Dbp Noivsh Location: Rieth

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Fedpfxezvfm Ej Aivsgh • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV Fgodpfx Aeqlck Nsiveh - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Fgjdpoxzfqbefx Aiveh Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)