Used Maka Hc 57 R for sale (50)

Condition: repair required (used), Year of construction: 2005, operating hours: 52,751 h, functionality: unexamined, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, nominal power (apparent): 12 kVA, controller manufacturer: BWO, controller model: CNC 920, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 20,000 rpm, overall weight: 16,600 kg, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, continuous operating pressure: 6 bar, MAKA AP70 5-Axis Cpedpfxsv Rlpye Afnou Year of manufacture: 2005 Weight of gantry including unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 l/h uncompressed Control type: BWO CNC 920 Controlled axes + max. travels approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range: 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 positions / 160 mm Machine table: 2 clamping stations with 6 support crossheads with clamping / pneumatic clamping devices Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° The machine is currently not operational. The spindle, including the conversion kit, must be replaced with newer software (available upon request from Maka). The machine can be inspected live in 94424 Arnstorf, Germany, by appointment. All information is provided without guarantee; sales to commercial customers only. Inspection and pickup by appointment in 94424 Arnstorf, Germany.

Condition: good (used), Year of construction: 2005, Used machine MAKA PE 70 5-axis CNC machining center for machining wood and plastic. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2005 Technical data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) A-axis 540° (rotation axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1) 10 kW (S6), speed continuously adjustable up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine, with 20 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 x control circuits for "lifting / lowering" stops - 2 x control circuits for "lifting / lowering" slide bar - 2 x control circuits for "clamping / releasing" pneumatics - 2 x vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine designed with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per vacuum pump approx. 130 m³/h, with tank. - Vacuum supports with various suction plates. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. Codpfx Afsvr A A Tonepu Work safety: - Mobile protective cabin with safety bumpers on the operator side. Repairs / maintenance before delivery: - New maintenance. - New slatted curtain on the portal - New sliding window - New Y-axis energy chain - New Z-axis energy chain - Various cables and air hoses replaced.

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: 8905829, planing width: 430 mm, total height: 1,200 mm, total width: 600 mm, table length: 2,750 mm, input voltage: 380 V, power: 3 kW (4.08 HP), Planing width: max. 430mm, table length 2750mm Cpsdpfjuivw Tsx Afnju 4-blade shaft with reversible blade, toothed table lips Chip thickness adjustment via handwheel with magnifying glass display Motor: 3kW, 380V Condition and details see pictures

Condition: good (used), Year of construction: 1991, cutting width (max.): 1,050 mm, cutting height (max.): 135 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, overall weight: 930 kg, power: 5.5 kW (7.48 HP), Equipment: scorer, MAKA SC 3200 Sizing saw with scoring unit Manufacturer MAKA/Griggio Technical data: Trimming carriage 3200mm cutting length 3300mm Cutting width right from saw blade 1050mm saw blade max. 400mm cutting height 135mm Saw blade can be tilted 0-45°. cutting height at 45° = 90mm (400'er saw blade) motor 5,5 KW/400 Volt 3 speeds 3/4/6000 rpm motor scorer 0,75KW Scorer Ø 125mm suction connection 120mm wide and narrow protection hood Cpjdpfx Asp H Tgbefnju dimensions 3250x3100x830mm Weight 922 KG

Year of construction: 1999, condition: ready for operation (used), Main Drive Number of axis 5 Additional Equipment Energy Chains: Various models This 5-axis MAKA FPM 470 CNC Wood Machining Centre was manufactured in 1999. Ideal for complex woodworking projects, it offers precision and versatility. If you are looking to get high-quality milling capabilities, consider the MAKA FPM 470 machine we have for sale. Contact us for more information about this machine. Application Types Csdpfxsx D Ebxe Afnspu CNC Wood Machining

Condition: used, Year of construction: 1992, with Centrofix cutterhead infinitely variable feed 2 x outfeed rollers used, good condition, top equipment Make: Maka Type: DH 630 A Year of manufacture: 1992 Machine no.: 9201891 GS wood dust tested Motor: 6.7 kW Planing width: approx. 630 mm Planing height: approx. 300 mm 1 adjustable table roller Segmented pressure beam Segmented infeed roller 2 steel outfeed rollers Feed speed: 0-21 m/min, stepless Number of knives: 4 pcs Knife system: Centro-Fix reversible knives Cpedpfsxuv N Iox Afnou Digital display for planing height Electric height adjustment with manual fine adjustment handwheel Extraction port: Ø 150 mm Space requirement: approx. 1200 x 1200 x 1400 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, loaded free of charge, unpacked Sale as is, as inspected, without warranty or guarantee

Condition: excellent (used), Year of construction: 2018, operating hours: 12,805 h, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Siemens, controller model: 840D SL, workpiece length (max.): 2,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 600 mm, total height: 3,700 mm, total length: 6,700 mm, total width: 3,000 mm, table width: 1,500 mm, table length: 2,000 mm, table load: 500 kg, overall weight: 8,000 kg, spindle speed (max.): 24,000 rpm, operating hours of spindle: 4,314 h, spindle motor power: 16 W, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a high-precision 5/6-axis CNC machining center, MAKA MK 7s, from MAKA Systems GmbH, equipped with Siemens SINUMERIK 840D SL control and OP15 PCU operating unit. Cedpfxsx Hv I Dj Afnspu The machine comes directly from production, is powered up, and can be inspected or demonstrated in operation at any time. It is in very well-maintained technical condition and has been serviced regularly. TECHNICAL HIGHLIGHTS: - 5-axis milling technology with retrofitted 6th axis (B-axis / Lehmann rotoFIX EA-530) - Spindle completely overhauled (2025, €18,000 investment) - Tool magazine with 20 positions (rotary table) - Tool holder: HSK A63, max. speed 24,000 rpm, output 16 kW - Rapid traverse: X/Y = 60 m/min, Z = 45 m/min - Positioning accuracy per axis: ± 0.1 mm/m, repeat accuracy: ± 0.05 mm/m - 3D wireless measuring probe, tool breakage detection, spray cooling unit - Rectangular frame table with zero-point clamping system and chip management (brushes, guide plates, conveyor belt) - Pneumatic/hydraulic workpiece clamping incl. hydraulic unit - Hydraulic system up to 210 bar (3 clamping circuits) - CAD data, technical documentation, and layout plan available WORKING RANGE & DIMENSIONS: - Travel (X/Y/Z): 2,900 / 1,900 / 1,000 mm - A-axis: 196° C-axis: 540° - B-axis (Lehmann rotary table): retrofitted, integrated with the control system - Working area: 2,000 × 1,000 × 600 mm - Machine weight: approx. 8 t - Dimensions (L × W × H): approx. 6.7 × 3.0 × 3.7 m FURTHER EQUIPMENT: - Saw blade pick-up station (Ø 450 mm) - Reinforced front doors, sheet metal safety enclosure with noise-reducing roof - Automatic safety sliding doors - Blowing nozzle in tool magazine (spindle cleaning) - Electrical connection: 400 V / 50 Hz – 19 kW – 43 A - Pneumatic connection: 6 bar / ½″ – air consumption approx. 800 l/h OPERATING HOURS / RUN TIMES: - Main power-on hours approx. 12,805 h (as of Oct 2025) The meter runs whenever the machine is powered—during setup, maintenance, or idle time as well. - Spindle run time: 4,314 h total The current spindle was fully renewed and overhauled in 2025 SPECIAL FEATURES: - Powered up – demonstration available at any time - Direct from production – not a dealer sale - Complete technical documentation available - Support with dismantling, loading, and transport available (for a fee) Price: €174,900 net – optionally incl. 6th axis (Lehmann) €199,000 Price is net, negotiable with quick turnaround. All details have been provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 21017403, travel distance X-axis: 1,250 mm, travel distance Y-axis: 5,900 mm, travel distance Z-axis: 250 mm, controller manufacturer: BWO 900C, workpiece weight (max.): 8,000 kg, rotational speed (min.): 1,000 rpm, rotational speed (max.): 17,000 rpm, overall weight: 8,000 kg, spindle motor power: 12,500 W, number of spindles: 1, number of slots in tool magazine: 32, mount diameter: 90 mm, tool diameter: 160 mm, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2024, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in working order and in use will be available from 01.11.2024 at the earliest .After services and repairs are Vacuum pump, central lubrication, tool magazine, spindle . The machine connected to the network is possible to check and try out. In addition, on the equipment of the machine is a software with a postprocessor for the production of stairs and a laser projector. There is a possibility of training . Cpsdpfjuyl Npsx Afnou

Condition: used, Year of construction: 1993, Table lift: motorized Table length: 3000 mm Table width: 800 mm Max. table lift: 500 mm Column throat: 600 mm Pressure shoe: spring-mounted Sanding shoe width: 150 mm Sanding belt length: 7830 mm Sanding belt width: 150 mm Upper belt cover: present Belt speed 1: 18 m/sec Belt speed 2: 36 m/sec Running direction: left/right Weight approx.: 480 kg Motor power: 2.2 kW Extraction diameter: 2x160 mm Storage location: customer Cedpfxsvnw Nge Afnopu

Condition: used, Square Mortise Drill, 4-sided Mortiser Chain Mortiser, Tenon Mortise Machine MAKA (Max Mayer) TYPE ED 30 Serial No. 3130 Tenon width: 75 mm Cpedpfxjxw Rbdo Afneu Throat depth: 0 to 75 mm (without wood plate) Hand lever stroke: approx. 125 mm Max. clamping width: 140 mm Chisel width: 8 mm Speed: 2800 rpm Motor power: 0.3 kW Power connection: 380 Volt, 50 Hz - Adjustable mortise stroke via eccentric shaft - Depth feed via hand lever - Mortiser adjustable up to 75 mm via threaded spindle - Quick-release lever for clamping device - Double column guide, robust design - Suitable for mortising rectangular holes for tenon joints Dimensions (L x W x H): 420 x 360 x 400 mm Net weight: 38 kg Very good condition

Condition: ready for operation (used), Motor 1.5 kW 2 presses Depth of opening 13 cm Width of opening 20 cm Height of opening 15 cm Codpfx Aet D Evpsfnspu

Condition: good (used), Year of construction: 2000, Maka MM 7 T / 5 axes, year of manufacture 2000, Siemens 840 D control, X/Y/Z travel 2x1500/2000/600 mm, portal milling machine for light machining, milling spindle 7.5 kW, NC milling head, A axis 540°, B axis +/- 100°, 10-position tool changer, HSK F 63 holder, max. saw blade diameter 170 mm, spindle speed up to 24,000 rpm, X/Y axis rack and pinion, Z axis ball screw, vacuum table, aluminium flat table. Codpfx Aowuy Ahjfnjpu

Condition: used, Year of construction: 1992, with Centrofix cutterhead Used, good condition, low operating hours Manufacturer: Maka Model: AH 430 Year of manufacture: 1992 Codpfx Aoxuv Rrofnspu Machine no.: 9201531 GS-tested for wood dust Motor: 3.0 kW Control panel on top Planing width: approx. 430 mm Infeed table length: approx. 1500 mm Outfeed table length: approx. 1200 mm Pendulum guard Table lips slotted/low-noise Number of knives: 4 pcs Centrofix cutter block Table adjustment via handwheel automatic brake Extraction connection: D 140 mm Required space: approx. 2700 mm x 1200 mm x 1400 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, without any warranty or guarantee

Year of construction: 2005, condition: ready for operation (used), A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible. Cpodpfx Aevmq Tvjfneu

Year of construction: 2000, condition: ready for operation (used), Max. cutting height: 100mm, saw blade diameter: 250-400mm, bore: 30mm, carriage length: 2600mm, motor power: 5.5kW, length: 3100mm, width: 2400mm, height: 1500mm, weight: 770kg. On-site inspection is possible. Cpsdpfxsurwyve Afnju

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available. Cpjdetqfqxjpfx Afneu

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Extraction connection: 100 mm Cjdpfx Ajv S Diuofnjpu Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg

Condition: used, Year of construction: 1993, working width: 180 mm working height: 120 mm number of spindles: 4 Spindle configuration: unten, rechts, links, oben motor shaft spindle down: ca. 5,5 kW motor shaft spindle top: ca. 5,5 kW motor shaft spindle right: ca. 5,5 kW Motorleistung Welle left: ca. 5,5 kW adjustment shaft down: Kurbel Csdpjpn Nypofx Afnspu adjustment shaft right: Kurbel adjustment shaft left: Kurbel adjustment shaft top: elektrisch cutter heads: Wendemesser feed speed: stufenlos feeder pressure: Feder power consuption: 20 kW motorbrake: - weight:

Condition: used, Year of construction: 1986, comb. with handle olive drilling unitused, great condition, little usedMake MakaType STV-71-BYear of construction 1986Machine no. 864653pneumatic workpiece clamping laterally 1 piecepneumatic workpiece clamping from above 2 piecesRequired space approx. 1350 mm x 1200 x 1200 mmWeight approx. 1000 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenwithout guarantee and guarantee Cpsdpfxsvwfz Ns Afnju

Condition: used, used, top equipmentincluding setting gaugeMake MakaType STV-71Column machinewith caulking tools see picturesWorkpiece stop 2 piecesStop rail right / left 2150 mmWorkpiece blow-out 2xFoot switch2-hand safety circuitpneumatic workpiece clamping at the side 1 piecepneumatic workpiece clamping from above 2 piecesExtraction connection D 120 mmSpace requirement approx. 1200 mm x 800 mm x 1500 mmStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Cpjdovwf I Nepfx Afneu

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, MAKA BC 150t compakt, second-hand machine 5-axis CNC machining center for machining aluminium and plastic. Stand portal in 4-column design (bridge center), 2 x unit carrier Technical data: Working ranges in 5-axis operation, with tool Ø 160 / length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm / with 180 mm fixture height Couplable tables, for processing large components. Extended extension stroke, for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotation axis 540° / swivel axis 196° (+/- 98°) Table design: - 2 x aluminum flat table, size 2,500 x 1,500 mm - M10 threaded bushes and centering bolts in the table top. - 3 x vacuum clamping circuit per table. - 3 x pneumatic clamping circuit per table. Milling unit: - 2 x universal unit for 5-axis milling with 50° inclined head, HSF F63 tool holder, max. power 12.5 kW (S1), speed infinitely variable up to 24,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip catcher system per milling unit, with lamella curtain. Tool changer: - 2 x rotary table tool magazine with 20 places. Control system: - 1 x Siemens SINUMERIK 840D SL machine control unit - 1 x Siemens OP 19 PCU control panel with 19" display, full keypad, membrane switch. - 1 x additional Siemens HT 8 portable manual control panel with 7.5" touchscreen, version with handwheel. Occupational safety: - 1 x soundproof cabin. - 2 automatic loading gates, with vision panels. - The loading and unloading area is protected by light barriers and bumpers on the tables. Measuring probe: - 2 x 3D radio measuring probes, with HSK F63 tool holder, for changing from the tool magazine. Minimum quantity lubrication: - 2 pieces minimum quantity lubrication - 2 flushing nozzles per milling unit, each individually controllable via M function. Table blow-off system: Cjdpfxetq Hkrs Afnepu - 2 x Airknife table blow-off system, for blowing off the tables during the exit from the machining area. Limited in coupled operation. The machine is assembled and can be inspected in 89568 Hermaringen.

Condition: excellent (used), 4 kW motor Saw with scoring saw Cpodpfx Ajr Ddkaefnju Adjustment of the cutting angle Adjustment of the cutting angle Table length 150 cm

Condition: excellent (used), Table length 180 cm Trolley width 150 cm Table width 120 cm Engine 5.5kw Adjustable height and angles Csdswl Dgfspfx Afnjpu

Year of construction: 1989, condition: like new (used), Spindle diameter 30 mm Cpjdpfx Afjhi Tv Hjnju 5.5 kW engine power 5 speeds 3000/4500/6000/8000/10000 U / T 1989 Can be purchased without advance

Condition: good (used), Feed through production line for wooden doors very hight efficiency one complete door in 30 seconds (lock hole, handle hole, anuba hinges) Machine composed from two parts - so in the same time 2 doors are processed each from both sides Each part of the machine can work independent on the left side and right side Cpedpfx Afsuq Scponsu Part 1 - left side milling for strike plate and milling handle hole and key hole - right side in the same time makes boring for anuba hinges Part 2 - left side milling for lock hole - right side in the same time makes inserting anuba hinges