Used Maho Mh 400 P for sale (438)

Condition: used, Year of construction: 2008, x-travel 800 mm Bjdeukwatspfx Afnslc y-travel 800 mm z-travel 800 mm Control iTNC 530 Heidenhain Max. rpm 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A63 swivellable B: 0 - 190 ° swivle time 1,2 s table diameter 900 x 700 mm max. table load 1.400 kg rotatable C: 360 ° number of toolpositions 40 pos. tool taper HSK-A63 change-time chip to chip ca. 5,0 sec rapid traverse ( X / Y / Z ) 60 m/min rapid traverse B: 30 m/min rapid traverse C: 30 m/min feed speeds max. 60.000 mm/min total power requirement 64 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 6,5 x 3,5 m 5 Axis CNC-Machiningcenter Universal DECKEL MAHO - DMU 80 P duoBLOCK - 5-Axis - Swivel-Milling-Head - Rotary-Table

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control iTNC 530 Heidenhain Max. rpm 18.000 min/-1 Blsdpfx Astqmmzsfnec power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK A63 swivellable B: 0 - 190 ° swivle time 1,2 s table diameter 900 x 700 mm max. table load 1.400 kg rotatable C: 360 ° number of toolpositions 60 pos. tool taper HSK A63 change-time chip to chip ca. 5,0 sec rapid traverse ( X / Y / Z ) 60 m/min rapid traverse B: 30 m/min rapid traverse C: 30 m/min feed speeds max. 60.000 mm/min total power requirement 64 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,0 x 6,5 x 3,2 m 5 Axis CNC-Machiningcenter Universal DECKEL MAHO - DMU 80 P duoBLOCK - 5-axis simultaneous - Swivel-Milling-Head - Rotary-Table

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Blodpfx Aox S Rcmjfnoc

Condition: not inspected (used), Machine acquired as an additional purchase and has not been connected. Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical control: CNC PHILIPS Spindle speed: 20 to 4000 rpm Table size: 900 x 480 mm Quill stroke: 80 mm Year of manufacture: approx. 1986 Voltage: 380 V Width: 2500 mm Depth: 2400 mm Overall height: 2000 mm Weight: approx. 3.5 t Bodpfx Afjx Ea Icsnslc

Condition: ready for operation (used), Maho milling table for Maho milling machine MH 700 S, milling table for interchangeable pallets 500x630 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Bledpfjx Dw Iwsx Afnjc

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Control: Heidenhain 430 X travel: 800 mm Y travel: 700 mm Z travel: 600 mm B-Axis: Automatic swiveling milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Tool holder: SK40 Accessories: Chip conveyor Through-spindle coolant 40 bar Handwheel Heidenhain TS 642 probe Bljdpfx Afjx Dlf Ronoc

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Travel x/y/z : 300/350/220 mm SK 40 holder Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Bsdpfx Afjir U H Ejnelc Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1988, condition: good (used), For sale is a milling machine of the company Maho and the type 500 W Bjdpfoittrlox Afnjlc The machine is in good condition and fully functional Year of manufacture: 1988 Heidenhain TNC 232 travels X- 500 mm, Y- 380 mm, Z-350 mm spindle mounting ISO 40 quill stroke vertical 50 mm spindle speed 20-4000 rpm, infinitely variable feed range 1-3000 mm/min rapid traverse 5 m/min table load 250 kg total power requirement 11,3 kW Machine weight approx. 2 t All prices plus VAT machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Year of construction: 1986, condition: good (used), CNC milling machine MAHO MH 800 E year of construction 1986 half cabin Technical data: X-axis travel 800 mm travel Y-axis 450 mm travel Z-axis 500 mm spindle mounting ISO 40 spindle speed 63 - 3150 rpm rigid angular table 1200 x 620 mm feeds X, Y and Z 1 - 1500 mm/min rapid traverse X-axis 4000 mm/min rapid traverse Y-axis 2500 mm/min rapid traverse Z-axis 3000 mm/min drive power 5,5 kW weight approx. 4000 kg outer dimensions approx. 2600 x 2600 x 2200 mm with Bodpeig E Thsfx Afnjlc - Philips 432 screen control - rigid angle table - documents available function untested

Condition: repair required (used), Maho MH 900 C without housing Control: CNC 432 (V9) - working range X/Y/Z: 1000mm/500mm/650mm - Rigid angle table: 1150mm x 650mm Blodpfxjfgg Aae Afnjc - Maximum table load: 900 Kg - Spindle mounting: SK50 - Speed: 40 - 1600 rpm - Feed rate: 5 - 2.000mm/min - Rapid traverse: 6 m/min - Space requirement: L-3500mm, W-4185mm, H-2146mm Y-axis is not displayed but moves

Condition: like new (used), Year of construction: 2000, operating hours: 33,831 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: '3D contouring control Millplus, workpiece weight (max.): 1,000 kg, total length: 7,000 mm, total width: 3,500 mm, overall weight: 3,902 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 15,000 W, Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Bledpfx Afexvrbisnec Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rated power kVA: 55 Basic machine dimensions / weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Condition: used, x-travel 400 mm y-travel 400 mm Bodoxv D Uzspfx Afnolc z-travel 300 mm rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment

Condition: like new (used), Year of construction: 2005, operating hours: 48,898 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 2,000 kg, total height: 3,400 mm, total length: 6,000 mm, total width: 4,500 mm, rotational speed (min.): 30 rpm, overall weight: 15,800 kg, spindle speed (min.): 18,000 rpm, number of slots in tool magazine: 40, Year of construction: 2005 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1000 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) A-axis degrees: 130º B-axis degrees: 0-190º Bedpfxoxur Sxo Afnolc Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1100x900 Max. workpiece weight kg: 2000 Table rotation speed rpm: 30 Spindle Spindle speed rpm: 18000 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 High-pressure bar: 40-80 Tool system Tool holder: HSK-A 63 Tool magazine slots: 40 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 144180 Spindle Working: 48898 Rated power kVA: 65 Basic machine dimensions / weight Length mm: 6000 Width mm: 4500 Height mm: 3400 Weight kg: 15800

Condition: excellent (used), Year of construction: 1989, Philips CNC 432 control Travel paths X/Y/Z 600 x 400 x 450 mm Spindle speed 4,000 rpm 20-position tool magazine SK 40 4th axis Lehmann Blsdjxc N Iyopfx Afnjc

Condition: new, functionality: fully functional, A new control system for your machine – modern servos – new controller – up to 6 axes The Retrofit Kit V2.0 enables the existing scale of Maho 600 Series industrial machines to continue being used. Previously, digital operation required feedback from the motor to the servo amplifier. With the analog system, position feedback is routed to the CSMIO. This means that the motor encoder is now only required for the servo drives, no longer for the CNC controller. As a result, pitch errors can be eliminated thanks to the direct measurement approach. The kit for the Deckel Maho 600 Series includes: - 1 x Delta B3 Controller with 1500-watt output - 1 x Delta B3 Motor 1500 watts with brake - 2 x Delta B3 Controllers with 1000-watt output each - 2 x Delta B3 Motors 1000 watts - 2 x 5-meter encoder cables - 2 x 5-meter motor cables without brake - 1 x 3-meter encoder cable - 1 x 3-meter motor cable with brake - 2 x B3 plug-in boards without brake incl. 3 patch cables per board - 1 x B3 plug-in board with brake incl. 3 patch cables per board - 1 x BIG IO interface module Bjdpfxexz Dkgo Afnelc - 1 x Maho Deckel & Co connection board - 2 x encoder boards - 1 x Digital Input 12-23 board - 1 x patch cable set - 1 x CSMIO IP-A controller - 1 x milling SIM software with customized interface - 1 x 24 V 10A power supply - 1 x power distribution unit with LED display - 1 x C2000 4.0 kW frequency inverter We are also happy to provide you with a quote for Deckel, Mikro, etc.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: Heidenhain, controller model: 426-430, 5-axis area with X-axis travel: 1800 mm, Y-axis travel: 2000 mm, Z-axis travel: 2000 mm, and C-axis: 360 x 0.001 degrees. The spindle speed is 8000 rpm with an SK 50 tool holder. Tool changer with 60 positions, table size of 1700 x 1400 mm, and a maximum table load of 5000 kg. Blsdpfx Afexzil Aonec

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control iTNC 530 Heidenhain Speed Mainspindle 50 - 18.000 min/-1 power capacity - main spindel 28 kW max. Torque 121 Nm tool taper HSK-A 63 Bodpfou Ag Irjx Afnelc Swivel range -30 / +180 ° table surface area dia. 900 x 700 mm max. table load 1.400 kg table speed 30 min/-1 rotatable C: 360 ° number of toolpositions 40 pos. tool taper HSK-A 63 max. tool diameter 230 mm max. tool length 450 mm max. tool weight 15,0 kg rapid traverse ( X / Y / Z ) 60 m/min Feed force ( X / Y / Z ) 13 / 13 / 9 kN weight of the machine ca. 13,0 t dimensions of the machine ca. 5,5 x 3,5 x 3,5 m total power requirement 68 kVA 5 Axis Machining Center - Universal DMG DECKEL MAHO - DMU 80 P duoBLOCK - Swivel-Milling-Head (B-Axis) - NC-Rotary Table (C-Axis) - Application Tuning Cycle ATC - WITHOUT clamping devices

Condition: ready for operation (used), Offered is a milling machine from MAHO with Heidenhain TNC 121 control, table X/Y 1000mm/600mm, SK40 tool holder, 3526h. Operating manual is available. Inspection is possible by appointment. Bledpfexyk U Asx Afnoc

Condition: used, Universal Milling Machine MAHO MH 800 Travel X: 700 mm Travel Y: 450 mm Travel Z: 450 mm Spindle SA 40 Spindle exit : 125 mm Spindle speed: from 32 to 1600 RPM Table size: Length 1050 mm x Width 620 mm Manual table travel: 225 mm Table rotation at 360° Swivel table at +/- 30° Scale 3 axes ACU-RITE Sensory drilling Feeds spindle not working Bljdpfx Afoxxa Rkensc Clutch speed used Lubricant pump Voltage: 380 V Width: 2000 mm Depth: 2100 mm Height: 2500 mm Weight: 3 T

Condition: used, Year of construction: 1989, Universal CNC Milling Machine MAHO MH 600 E2 Bodpfxoxxa Amo Afnjlc Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3,5 T

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm quill stroke 80 mm Bledpfxju Rt I Ij Afnec table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Condition: excellent (used), Year of construction: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current industry standards. Technical specifications: - Heidenhain TNC 320 retrofit - Travel X- 500 mm, Y- 380 mm, Z- 350 mm - Spindle taper SK 40 - Vertical quill stroke 50 mm - Spindle speeds 20–3150 rpm, stepless Bljdpfjxw N S Iox Afnec - Feed rate 1–3000 mm/min - Rapid traverse 5 m/min - Table load capacity 250 kg - Total power requirement 11.3 kW - Machine weight approx. 2 t - Handheld control unit - Safety guard An on-site inspection/test under power is, of course, possible. We are happy to offer transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and equipment from other renowned manufacturers. We support you throughout the entire process! From machine purchase, transport, and delivery, up to commissioning and subsequent maintenance or repair work – you can rely on us.

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m Blsdpfx Afju Rt Nxsnsc CNC milling machine with 432 Control.

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm z-travel 400 mm Bsdpfx Afeu Rt Nrjnjlc table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control.

Condition: good (used), Second-hand machine in good condition Control type: Conventional active digital Location : 35708 Haiger Price : 13.500€ excl. Technical data: Digital display 3-axis digital display HEIDENHEIN TNC 134 Travel X-axis 500 mm Travel Y-axis 350 mm Travel Z-axis 380 mm Tool holder Vertical milling head SK 40 with hydr. tool clamping DIN 2080 ring groove Table type Fixed table Table clamping surface 800 x 360 mm T-slot size 14 mm Weight 1,600 kg Dimensions Bodpfx Asigv Ipjfnslc 1500 x 2000 x 1900 mm Accessories - Central lubrication - coolant system - Operating instructions