Used Magnetic Plate for sale (16,070)

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Location: from stock 54634 Bitburg - available immediately - Hfedpfx Aaewqx Axocen

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg Hjdpfx Aexm Sagsacofn

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well Hedpfxovn Al Hs Aacofn dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute Hfedpsxmakgsfx Aacon - Operating instructions (PDF)

Year of construction: 2022, condition: used, New: Yes Colour: White Empty weight: 350 kg CE mark: yes Reference number: 1 Delivery terms: EXW Production country: KR Please contact Ö. Inalkac for more information ACP5R is 350kg excavator mounted vibration plate compactor with hydraulic rotation. ACP5R is suitable for 6-12ton excavator. Available from Netherlands. Contact us for details. Verdichter, Compacteur, Puristin, Kompaktor, compactador, Zagęszczarka, Þjöppur, Komprimator, Цомпацтор, Συμπιεστής, Compattatore, Trilblok Hsdjuighcepfx Aacefn

Condition: used, Year of construction: 1967, total length: 3,500 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 4.500 kg Price: On request - Year: 1967 - Documentation available: No - Serial number: 3058 - Max. sheet thickness: 7mm - Top roll diameter: 220mm - Max. working width: 1500mm Hedpfsxhcgmsx Aacsfn - Number of rolls: 3 - Control: Conventional - Transport dimensions: 3500mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2021, 1 used motorized plate bending roll Manufacturer: Akyapak Model: ASM 140-12/5 Year of manufacture: 2021 Technical specifications Sheet width: 1250 mm Sheet thickness: 5.5 mm Pre-bending: 5.0 mm Roll length: 1280 mm Minimum diameter: 210 mm Top roll diameter: 140 mm Weight: 1365 kg Dimensions (LxWxH): 2,020 x 900 x 1,200 mm Standard equipment: – Central rolls driven by electric motor, planetary gearbox, and gear drive – Side-opening top roll Hsdpfxoxnpwxe Aacjfn – Main motor with brake system – Cone bending device – Mobile control panel and foot pedal – CE mark / Declaration of Conformity

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1200 mm -Table height: 735 mm -Plate thickness: 125 mm Hjdpfx Aaexm R S Uecjfn -Transport dimensions: 2000/1400/H735 mm -Weight: 2220 kg

Condition: new, sheet width 2050 mm plate thickness 3 mm strokes per minute until 35 cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW Hodpfx Aaevdfmxecefn weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Travel paths Longitudinal movement (X-axis): 5,500 mm Vertical movement (Y-axis): 3,200 mm Spindle movement (Z-axis): 600 mm RAM/Outrigger movement (W-axis): 600 mm Feed rates X, Y, and Z axes: 2,800 mm/min Spindle unit Spindle power: 37 kW Boring spindle diameter: Ø 125 mm Spindle sleeve diameter: Ø 240 mm Spindle taper: SK50 Number of gear stages: 4 Spindle speed range: 3–700 rpm Faceplate diameter: Ø 1,000 mm Faceplate speed range: 1–82 rpm Gear stages Stage I: 3–33 rpm Stage II: 30–85 rpm Stage III: 88–247 rpm Stage IV: 250–700 rpm Connection data Operating voltage: 3 × 400 V Mains frequency: 50 Hz Total connected load: 80 kW Dimensions and weight Machine footprint: approx. 8 × 5 m Total height: approx. 5.5 m Machine weight: approx. 50,000 kg Features and accessories Hfsdpfx Asxn Al Aeacjn Robust, flat-bed horizontal boring mill in moving column design, in very good condition Retrofit including electrical system in 2014 Refurbished control panel with Heidenhain digital readout Coolant tank with belt filtration system, high and low pressure pumps Counterweight for weight compensation Conventional control Thread cutting device with change gears Axis drives via intermediate gearbox Swiveling control panel for operation from the front or rear of the machine Telescopic steel cover for X-axis Scope of delivery excludes foundation plates and rotary table Chip conveyor included in delivery

Condition: excellent (used), Year of construction: 2021, total width: 1,000 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Angles plate ASQUITH - HT-35/10 MACH-ID 9260 Make: ASQUITH Type: HT-35/10 Hfsdpfjxhgg Dsx Aacon Year: 2021 Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:1 Length: 1200mm Width: 1000mm Height: 3500mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Krupp Electro Magnetic Conveyor Belt, Heavy Duty Hfsdpfx Aexnnddoacon Block : L= 1650 x W=1200 x H=600 mm Power Block = 7,7 kW Power Drummotor = 5,5 kW Beltwidth: 1400 mm, A-A = 3200 mm Speed = 2,5 m/sec. Including rectifier (new) Weight appr. 7500 kg On stock 1 piece.  

Condition: good (used), functionality: fully functional, Type: gosmeta 3-roll plate bending machine Maximum rolling length: 2100 mm Estimated rolling thickness (S235) over the entire length: between 8 and 10 mm Exact value not known, as the nameplate is unreadable Top roll diameter: 190 mm Lower roll diameter: 170 mm Rolling speed: 5.3 m/min Lower rolls: powered Drive: electric Side: fold-away for removing edge-bent products Shafts for profile rolls: 3 × Ø 90 mm Foldable side for removing closed cylinders. Equipped with emergency stop wire around the machine. Hsdpfoxmvhzex Aacjfn Profile rolls or special segment rolls can be mounted on the 3 × Ø 90 mm shafts. Machine dimensions: length 360 cm x width 120 cm x height 140 cm Weight approx. 2800 kg

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 630 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 19 mm Hfsdpfx Aaexm R Ipecjn -Dimensions: see drawing in the photos -Dimensions total: 630/500/H75 mm -Weight: 162 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 6922191908, controller model: Cybelec D-Touch-7, working width: 4,100 mm, sheet thickness (max.): 6 mm, back gauge: 1,000 mm, overall weight: 10,470 kg, TECHNICAL DETAILS Max. working width: 4,100 mm Max. sheet thickness: 6 mm Backgauge: 1,000 mm MACHINE DETAILS Control type: Cybelec D-Touch-7 Dimensions & Weight Dimensions (L x W x H): 5,100 mm x 2,300 mm x 2,400 mm Motor power: 11.0 kW Hodoxgdl Ijpfx Aacsfn EQUIPMENT Pneumatic sheet support CE marking

Year of construction: 2018, condition: used, Serial number: 1302xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19196 Description: Hfedpfx Aaovgzv Iscsn Ammann 538 kg vibrating plate for sale. It has stood for less than a year since it was new and not used at all. Everything must work as it should Ready for delivery.

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:2 Length: 1200mm Width: 1500mm Hedpfoxhgfmsx Aacefn Height: 3500mm Weight: 7000kg

Condition: ready for operation (used), Permanent Magnetic Conveyor Belt (unused) Brand: LKoreman Block : L= 1200 x W=850 x H=300 mm Length frame A-A = 1900 mm Beltwidth: 800 mm Driving Gear Unit 1,5 kW Hfsdpfx Aajxnndqocen Speed 1.6 m/sec  

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar Hedopgmpdepfx Aacjfn number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm weight: 2500 kg

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots for hydraulic press, eccentric press -Clamping surface: 705 x 484 mm -Inner diameter: 250/220 mm -Plate height: 65 mm Hedpetnlz Hofx Aacofn -Groove width: 22 mm -Dimensions: see drawing in the photos -Dimensions total: 705/484/H65 mm -Weight: 147 kg

Condition: ready for operation (used), Permanent Magnetic Block (unused) Brand: LKoreman Dim. Block : length 1200mm, width 850mm, height 320mm. Hjdpfxoxnndks Aacsfn Heavy Duty On stock : 2 pieces.

Condition: excellent (used), 1 permanent - magnetic Chuck D = 315 mm Hfedpfed Eaauox Aacen with mounting flange DIN 55027 Gr. 6

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table Hodowclcispfx Aacsfn -Clamping plate: with support ribs, on a solid base frame -Clamping surface: 800 x 800 mm -Table height: 930 mm -Plate thickness: 25 mm -Transport dimensions: 800/800/H930 mm -Weight: 235 kg

Condition: good (used), Solenoid valve for glue melters -Magnet valve: 5/2 way valve Hodpfxsdntfrj Aacsfn -Pressure: max. 6 bar -Connection: 24 V DC -Watt: 8 W. -Protection class: IP 65 -Dimensions: 95/30/H65 mm -Weight: 50 g

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a WOTAN drilling machine -compatible with: Linear actuator ID 22786 -Travel: 1110 mm -Clamping plate: 1000 x 1260 mm (rotatable) -Plate is: Solid Hodpod E Hk Hefx Aacsfn -Groove width: 21 mm -Dimensions: 2470/1070/H885 mm -Weight: 2200 kg