Used Liebherr R 313 Litronic for sale (236)

Condition: used, mileage: 67,400 km, lifting height: 59,100 mm, Year of construction: 2018, Drivetrain Drive: Wheel Weights Dodpfxjtr Nuqe Acwjur Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Identification Serial number: 076646 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Upper engine: Perkins Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x4 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Dujdox Ezyvspfx Acwer Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Condition: used, Year of construction: 2007, Liebherr A924b-957 litronic TIER 3 OVERHAULED Year of manufacture: 2007 Liebherr engine 127kW Tier 3 / EPA 8 solid tyres 10.00-20 Gumasol Dozer blade Industrial mono boom 6.80m Industrial angled stick 5m Operator's cab hydraulically elevating Cabin with front protection grille Radio system Duodpfx Asyt Idpocwjr Air-suspended driver's seat Positioning swing brake Lift cylinder damping Lift cylinder with pipe rupture protection Overload warning device Generator drive mounting kit DRIVELINE WARRANTY

Condition: used, mileage: 185,652 km, power: 240 kW (326.31 HP), first registration: 10/2011, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 8x6, fuel: diesel, color: yellow, driver cabin: other, gearing type: other, emission class: none, suspension: other, total length: 10,400 mm, Year of construction: 2011, construction height: 3,900 mm, This used Liebherr LTC 1045-3.1 is a powerful truck with crane superstructure, ideal for commercial applications. The crane was manufactured in 2011 and has a mileage of 185,652 km. Powered by a robust diesel 6x6 drive, the truck delivers 240 kW (326 hp) and a displacement of 7,201 cc, ensuring reliable performance and high efficiency. The vehicle is accident-free and features a yellow paint finish. It comes equipped with a green emissions sticker (Euro 4), allowing operation in urban environments. The crane supports various loading options and is perfectly suited for construction sites or other specialized operations. A Certificate of Conformity (CoC) is available, and all technical data has been determined to the best of our knowledge. Viewings are possible Monday to Friday and on Saturdays. If interested or for further questions, please contact us by phone or email. Registration service and delivery within Germany are available at an additional cost. Dusdpfjxvfa Sex Acwor Sale to commercial customers only (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Dedpeym Nfbsfx Acwsur Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Dusdpfxeym Nbce Acwer Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing * Duodovkpu Hjpfx Acwer

Condition: used, Year of construction: 2015, operating hours: 7,829 h, Beautiful machine – top specification! Liebherr Wheel Loader L 542P 2 plus 1 Serial No.: VATZ1269KZB036900 Year of manufacture: 2015 Operating hours: approx. 7,829 Machine delivered: 24/04/2015 Last recorded service: 27/06/2019 at 2,500 hours Liebherr 4-cylinder inline engine, water-cooled with turbocharging and intercooler, 156 HP Hydrostatic drive with 3 speed ranges Travel range 1: 0 – 6.0 km/h Travel range A1-2: 0 – 16.0 km/h Travel range A1-3: 0 – 36.0 (40) km/h * Automatic climate control – maintains the set temperature * BSS ride vibration damper (oscillation damping) * Central lubrication system – Liebherr factory install * 3rd and 4th hydraulic control circuit, e.g. for high tip bucket, grapple bucket, sweeper, etc. * Joystick lever lock * Sweeper equipment – with free return line + power socket at loader arm * Reversing camera with monitor in display * Industrial axles with 100% differential lock * Engine air intake via TOP-AIR pre-filter * Access aid for easier cleaning of windscreen (step) * Premium touchscreen display * Comfort driver's seat with pneumatic suspension * Seat heating * Heated exterior mirrors * Steering wheel adjustable in tilt and height * Left-hand opening window in the door * 4 x LED work lights on cab roof front * 4 x additional LED work lights on cab roof rear * Lint screen over cooling pack prevents contamination * Reversible fan for cleaning radiators (fan runs in reverse) * Radiators with coarse mesh for easier cleaning * External coolant pre-heater with 220V plug * Amber beacon, cab roof centre * Battery master switch * Radio with USB * Fire extinguisher * Rear towing coupling * Automatic engine shut-off after 5 minutes at idle speed * Rear bumper/ballast weight reinforced Permissible total weight: 17,000 kg; Unladen weight approx. 15,000 kg Length: 7,200 mm; Width: 2,500 mm; Height: 3,280 mm Tyres: 20.5 x 25 VA L4 – 95% - like new; 20.5 x 25 HA L4 – 95% - like new Offer includes hydraulic quick coupler + 2.8 cbm bucket: €61,300 net * Optional equipment available at extra charge: * High tip bucket from 3 – 5.5 cubic metres from €4,900 * 4-in-1 bucket (grapple/dozer bucket) * Grapple bucket 3 cubic metres €4,350 * High-capacity bucket 5 cubic metres €3,990 * Pallet forks (5 tonnes) €2,190 * Pallet forks (8 tonnes) €3,450 * Also available with onboard scales at extra charge: * Pfreundt WK 50 €3,900 Djdpfxeyumpms Acweur * Pfreundt WK 60 €5,900 All prices are net export/international, plus 19% VAT for domestic customers. Transport to your location can be arranged. Sale to commercial customers or export only. Sold as-is, as seen. No warranty or guarantee. Kilometre and hour readings are based on instrument displays, we do not guarantee their accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer. The provided information does not represent guaranteed properties/features. Description and details are for general vehicle identification only and do not constitute a warranty in the legal sense. Completeness of information is not guaranteed.

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm Diameter of the table 1500 mm max. module 22 Control 840D turning speeds 3,5 U/min table load capacity 20000 KG Distance of shafts 70...1220 mm Stroke length 30...330 mm no. of strokes 10...200 Hub/min total power requirement 138 kW weight of the machine ca. 38 t dimensions of the machine ca. 11x5 m machine: Full CNC machine with electronic rolling coupling for C- and D-axes and digital INDRAMAT drive technology. Stiff machine bed in welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wraparound, longitudinal guide with roller recirculating shoes. Ground preloaded ball screw with play-free preloaded nut. Digital AC drive technology with play-free gearbox. Linear measurement system for radial positioning. Freestanding machine table with electrohydraulically play-free preloaded double worm gear, part wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic compensation of the workpiece weight. Table hole with a diameter of 500 mm through and open at the bottom. Water-cooled digital AC servo motors. The machine is to be installed on a foundation. Machine stand: as a highly rigid cast construction for axial travel of 1200 mm. Axial axis (Z-axis) with hardened guideways, slide-guided, longitudinal guide and wraparound with roller recirculating shoes. Ground ball screw with play-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Duedpex R U Hmefx Acwsr Shapping head: SK 4.1 with hydraulic NC servo drive for impact spindle movement and cutting wheel lifting, stroke length 330 mm, impact spindle diameter 160 mm. Hydrostatically supported impact spindle, linear guide and lateral guide for the lifting mechanism. Maximum tool diameter 300 mm. Drive motor power 30 kW. Stroke rates from 10 - 200 DH/min, stroke speed from 5 - 45 m/min. Impact spindle speed for working and return stroke independently programmable. In the cutting area, the spindle speed remains constant. Maximum cutting wheel speed 10 rpm, digital AC drive technology. Cutting wheel lifting correction for internal and external gearing manually reversible. Lateral offset of the impact spindle axis up to 50 mm from the machine center to prevent return stroke collision of the cutting wheel, manually adjustable.

Condition: used, functionality: fully functional, power: 42 kW (57.10 HP), fuel type: diesel, empty load weight: 6,000 kg, lifting height: 3,500 mm, Year of construction: 2008, operating hours: 6,075 h, total length: 4,500 mm, construction height: 2,750 mm, drive type: Diesel, construction width: 1,850 mm, Wheel Loader Condition: Operational and fully functional Duodpsyvwymsfx Acwor Technical Condition: Good Front Tyres Type: Pneumatic Rear Tyres Type: Pneumatic Description: Wheel Loader LIEBHERR L506 Stereo — Articulated steering (+ rear axle steering) — Year 2008 — 6,078 operating hours — 2-speed hydrostatic drive, 20 km/h — hydraulic quick coupler — Maximum speed 20 km/h — 4-cylinder Liebherr diesel engine, 42 kW (57 hp) — Excellent, wide tyres approx. 90% — Permissible total weight articulated loader 6,300 kg — Height 2.75 m — Width 1.85 m — Lifting height 3.5 m — Yard loader incl. used pallet forks and used folding bucket — GOOD condition!! Bulk material bucket, quick coupler, + pallet forks Heater, full cab, 2-speed hydrostatic drive

Condition: used, Year of construction: 2004, machine/vehicle number: WLHZ0957HZK020047, Power: 127 kW, operating weight: 24,000 kg, equipped with quick coupler system and blade support, operating hours: approx. 14,900 h, NOTE: The wheeled excavator requires repair. Dsdpjyf R Emofx Acwsur

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 8 (10) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Duedpfxeyv Ipfo Acwer Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: used, New: No Dusdpfjykzrhsx Acwjr Please contact us for further information.

Condition: used, Year of construction: 2019, operating hours: 3,229 h, Liebherr L 538 Z 2plus1 Z-lift frame – as new – Regularly serviced by Liebherr. Delivered to customer on 29/03/2019 * 1st service at 485 hours on 30/03/2020 * 2nd service at 928 hours on 08/01/2021 * 3rd service at 1425 hours on 27/08/2021 * 4th service at 2520 hours on 20/03/2023 Chassis No. VATZ1559JZB53233 Year of manufacture: 2019 Operating hours: approx. 3,229 Lift frame with Z-kinematics – earthmoving 4-cylinder inline engine 111 kW/151 HP, water-cooled, turbocharged, emission stage 4 Length 7,200 mm, machine width: 2,500 mm, height: 3,280 mm Hydrostatic drive with 3-speed transmission Special equipment: * Ride vibration damping BSS – lift frame damping Dodpfxjyrzn Es Acwour * Central lubrication system, Liebherr factory installed * Automatic climate control (maintains set temperature automatically) * Steel lighting bracket instead of plastic * Access aid in front of windscreen for easier cleaning * Premium touchscreen display * Opening window in cab door * "Comfort" driver’s seat with pneumatic suspension, seat heating, and headrest * Adjustable steering column * Comfort radio with hands-free kit * Automatic bucket return * 3rd hydraulic circuit for attachments such as high-tip bucket, sweeper, grapple bucket, etc. * 2 rear LED work lights on cab roof * 4 front LED work lights on cab roof * Engine air intake with pre-separator for preliminary air cleaning * Programmable lift and lowering speed * Tilt cylinder rod protection * Automatic fueling pump with auto shut-off * Road approval Tyres: 20.5 x 25 L3, front axle 2 x 50% * Tyres: 20.5 x 25 L3, rear axle 2 x 50% (The tyres shown in the photos are fitted only for transport) Also available with agricultural tread – see photo no. or earthmover tread – see photo no. * Automatic self-locking differentials, 45% locking value, on both axles Net price with fixed 2.5 m³ bucket: €93,500 net plus VAT Optional equipment at extra cost: * Quick coupler incl. hydraulic preinstallation: €3,550 * High-tip bucket 3–4 m³ * 4-in-1 bucket (grapple/levelling bucket) 2 m³: €3,950 * High-volume bucket 5 m³: €3,990 * Pallet forks, 5 tons from €2,190 (8 ton option available) Available with on-board scale at extra cost: * Pfreundt WK 60: €5,900 Note: The brochure specification only partially matches this machine: – This machine has emission stage IV, brochure shows stage V. All prices are net export – with valid number and papers. Sale only to businesses or for export. Sale in current condition as the machine is. No guarantee or warranty. The stated odometer or operating hours readings are from the respective counter; no guarantee for accuracy. Subject to prior sale. This vehicle description does not constitute a binding offer and the information provided does not constitute guaranteed features. Description and information serve solely for vehicle identification and are not a warranty.

Condition: used, power: 190 kW (258.33 HP), Year of construction: 2013, operating hours: 16,426 h, Empty weight: 1 kg Please contact Emal Jaweed for more information Dedpfx Acoyn Nd Towjur

Condition: used, Year of construction: 1981, max. wheel diameter 36 mm gear width 36 mm max. module 10 total power requirement 12 kW weight of the machine ca. 11,2 t Duedjyi Hwyopfx Acwsr

Condition: used, Year of construction: 2023, operating hours: 1,200 h, Equipment: ABS, all wheel drive, Liebherr 504 Compact Year: 2023 Only 1,254 hours Tyres in very good condition Quick coupler Forks + bucket Delivery possible Immediately available ----We gladly arrange financing or leasing EU sale: net price with company documents and VAT ID VAT deposit: €2,000 We speak English We speak Serbo-Croatian Our service for you: - Export license plates - Export documents and EUR1 Dodpfx Asylgliocwour - Worldwide transport - Accommodation available - Transfer from Munich Airport or Passau station

Condition: used, Year of construction: 2016, operating hours: 17,628 h, Weighing system, quick coupler, bucket, fork, Very well-maintained machine, good tires, Previously used by a German company (concrete plant) Dedpfxeyuym Ee Acwsur

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 200 mm Djdpfxoxc E H Sj Acwsur gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Machine in good condition, without feed, without automation Available 24.08.2024 *

Condition: excellent (used), power: 100 kW (135.96 HP), gearing type: automatic, fuel type: diesel, color: other, lifting height: 7,000 mm, tire condition: 85 %, axle configuration: 4x4, first registration: 05/2024, Year of construction: 2024, operating hours: 103 h, Equipment: air conditioning, all wheel drive, differential lock, = Additional options and accessories = - 1 fuel tank - Day Cabin - Hub Reduction - PTO = Remarks = Condition CE type: CE Duodpfjyka Ihox Acwer = More information = General information Cab: day Serial number: VAUZ1977VZT030904 Drivetrain Drive: Wheel Axle configuration Tyre profile: 85% Brakes: disc brakes Front axle: Differential lock; Max. axle load: 6000 kg; Steering; Reduction: hub reduction Rear axle: Double wheels; Differential lock; Max. axle load: 6000 kg; Steering; Reduction: hub reduction Functional Clearance lift height: 700 cm Working height: 700 cm Quick coupler system: Yes Condition Technical condition: very good Visual appearance: very good

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 25,000 kg, wheel width: 3,000 mm, feed length X-axis: 1,000 mm, LIEBHERR L3002 CNC Internal and External Gear Hobber Built 1982, Modernized 2006 CNC SIEMENS 840 D. Max Wheel diameter 3,000 mm. Duodpfewdmy Ejx Acwjr Max helical angle 45° Internal and external Head. 44/50 kW.

Condition: used, functionality: fully functional, machine/vehicle number: 81.606.587.3, This is a Plus refrigerator from the ProfiPremiumLine GKPv 6570 series by premium manufacturer Liebherr, production year 20. With a gross capacity of 597 litres, it offers space for 2/1 GN containers or stackable E2 crates. The rounded stainless steel GN tray supports make cleaning significantly easier. The dynamic cooling system ensures rapid cooling of goods to the desired temperature, adjustable between -2°C and +15°C. Thanks to the powerful refrigeration unit and the professional-grade electronics, consistent cooling is ensured even with ambient temperatures of up to +43°C. Defrosting is automatic but can also be initiated manually. The unit has been inspected in our in-house workshop and is fully operational. Dujdsxz Tgdepfx Acwjr You will receive an invoice with VAT shown separately. Condition: Used, tested and fully functional Technical Data: • Dimensions (W x D x H): 700 x 830 x 2120 mm (external) • Dimensions (W x D x H): 510 x 650 x 1550 mm (internal) • Type: GKPv 6570 Index 40B /001 • Serial number: 81.606.587.3 • Power supply: V: 230 / A: 2.0 / W: 250 / Hz: 50 • Capacity: 597 litres (gross volume) • Refrigerant: R 290a • Weight: 129 kg • Year of manufacture: For further details, please refer to the attached image of the type plate. Additional Features: • Height-adjustable feet: Where daily hygiene plays a key role, the height-adjustable feet provide sufficient ground clearance, ensuring that cleaning even beneath the unit is easy and convenient. • Temperature alarm: The integrated temperature alarm provides both audio and visual alerts should the preset temperature thresholds be exceeded or not met, ensuring maximum safety for your stored goods. • SwingLine: The elegant SwingLine design with lateral light strips makes these units the first choice for those with the highest design standards. The gracefully curved design of Liebherr units makes them a visual highlight in professional environments. SwingLine doors feature a full-length integrated handle profile, making them ergonomic, easy to open, and particularly simple to clean. Shipping: • Delivery or customer collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by prior arrangement

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 15,080 h, Liebherr LH30. Year: 2015. Hours: 15,090. Industrial boom 6.80 m. Industrial stick 5 m with front cylinder. Four outriggers. Solid tires. CE certificate. Good condition. Duodpfx Acoya Iadswjr

Condition: used, Year of construction: 2007, max. wheel diameter 380 mm gear width 540 mm max. module 7 Control SINUMERIK 840 D Axial travel 600 mm table diameter 317 mm table speeds 100 U/min milling head -swivable + / - 35 Grad milling spindle drive 27,00 kW milling spindle speeds (infinitely variable) 1500 U/min diameter of hob 160 mm cutter length max. 330 mm cutter speeds max. 3000 1/min hob dia. - max. 160 mm swarf cutter lenght - max. 330 mm tangential travel max. 300 mm Dedpfx Asyt Rvhocweur 10.000 mm/min tangential speed max. 3000 mm/min 7.500 mm/min oil volume 100 l coolant capacity 780 l Counterholder movement 540 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,00 x 4,50 x H3,50 m for the following processes: axial hobbing, individual part milling, Worm wheel milling, roofing, deburring; NC tailstock

Condition: used, Year of construction: 2017, Equipment: all wheel drive, And we managed to get this one as well! Beautiful, clean machine – top equipment! Liebherr L 546 Z 2plus1 Chassis No. VATZ1560CZB045370 Year of manufacture: 2017 Operating hours: approx. 11,263 4-cylinder inline engine, 120 kW / 163 HP, water-cooled with turbocharging, Emission Stage 4 Operating weight: approx. 14,300 kg Machine width: 2,500 mm Hydrostatic travel drive with 3-speed transmission • Automatic climate control – maintains set temperature • 3rd and 4th hydraulic control circuit for attachments such as high-dump bucket, grapple bucket, etc. • Ride control BSS – lift arm suspension • Liebherr factory-installed central lubrication system • Fluff filter ahead of cooling pack prevents contamination • Coarse-mesh radiator for easier cleaning • Reversible fan for radiator cleaning – reverse operation • Access aid in front of windshield for easier cleaning • Air filter with “TopSpin” pre-cleaner for intake air • Premium touchscreen display • “Comfort” driver’s seat with pneumatic suspension, seat heating, and headrest Dsdpfsyqn Hxjx Acweur • Adjustable steering column for height and tilt • Left and right armrests • Tilting window on left driver’s door • Radio • Steel headlamp bracket for front headlights instead of plastic • 4 rear LED work lights on the cab roof • 4 front LED work lights on the cab roof • 2 additional rear work lights on the engine hood • Reversing alarm (audible – beeper) can be switched off • Rear area monitoring camera • Rear tow hitch • Crane lugs front and rear on the frame • Joystick steering and conventional steering • Tyres 20.5 x 25 FA 2 x 40% tread Tyres 20.5 x 25 RA 2 x 40% tread Net price with fixed-mounted 2.8 m³ bucket: €55,900 net plus VAT Optional equipment at extra charge: - Hydraulic quick coupler: €3,550 - Grapple bucket 3 m³: €3,980 - High-volume bucket 5 m³: €3,990 - High-dump bucket from 3–5 m³: from €3,950 - Pallet fork 5 or 8 tons: from €2,190 Available with scales on request: Used scales including installation, e.g. Pfreundt WK 50 or WK 60 from €3,900 (Also available with printer) All prices net export – within Germany plus 19% VAT. We can arrange transport to your location upon request. Sale only to commercial customers or for export. Sold as-is, as seen. No warranty or guarantee. The stated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer, and the details provided do not represent warranted characteristics. The description and information serve solely for general identification of the vehicle and do not constitute a warranty in the legal sense. The details are not guaranteed to be complete. The provided information/descriptions and images are non-binding and do not represent warranted features. Only the stipulations in the order confirmation and invoice are valid. The seller does not assume any liability or guarantee.