Used Levelling for sale (5,895)

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Hedod Sr Sispfx Aacsnu

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² Hjdpjrnq T Njfx Aacsnu coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001

Condition: excellent (used), axle configuration: 3 axles, wheelbase: 8,360 mm, first registration: 03/2014, Year of construction: 2014, General Information Mileage: 8,171 km Hjdpew H A Eiefx Aacjnu Axle Configuration Rear axle 1: Lift axle; Max. axle load: 10,000 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Max. axle load: 10,000 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Rear axle 3: Max. axle load: 10,000 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Dimensions Dimensions (L x W): 1,240 x 255 cm Weights Unladen weight: 14,840 kg Payload: 33,160 kg Gross vehicle weight: 48,000 kg Functional Equipment Pump: Yes High-pressure pump: Yes Water installation: Yes Water tank: Yes Hoses: Yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request Further Information Please contact John de Koning or Mark de Koning for more information.

Condition: used, In this offer you are purchasing a used dual-cutting laser "Spectra Pricision GL422N" Object of sale: 1 x Spectra Pricision GL422N with the following equipment: incl. transport case incl. hand-held and excavator receiver HL750 incl. RC402N radio remote control A total of 3 lasers are in stock. Hnodpfx Aoq Ht H Ijacsu Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, Year of construction: 2000, machine/vehicle number: 404, SECOND-HAND CHAIRS LEVELLING MACHINE CAMAM US1C - CE (2000) Hnjdpfswrcx Hjx Aacou

Condition: used, static maximum load 4,000 kg diameter 160 mm height 35 mm thread M 16 x 1.5 levelling height 20 mm weight 2.2 kg - 95 units on stock - new - Hnsdpfx Aajfii Diocsu price per unit  

Condition: excellent (used), Year of construction: 1998, SAC FS5 levelling machine Table length 290cm Planing width 530 4 tersa blades Hnjdpfxsh Eiule Aaceu Culage set at an angle of 45 degrees Weight 700 kg Power 3kw Year 1998 CE

Condition: excellent (used), Year of construction: 2001, strip width: 100 - 800 mm strip thickness steel (aluminium): 0,8 - 4 (7) mm reference material (tensile strength): 600 N/mm² coil weight: max. 13 t coil OD: max. 2.000 mm year: 2001 Hsdpfx Aaernq Ufocjnu

Condition: ready for operation (used), working width 500mm 4-knives shaft classic knives Hnjdpfx Aaorakp Ejceu tables length 2250mm electric adjustment of thicknesser table weight 850kg

Condition: used, Thickener: Max planing width: 410 mm Min planing height: 3 mm Max planing height: 240 mm Min length of planed piece: 180 mm Knife shaft diameter: 100 mm Number of knives: 4 2 feed speeds: 7/14 m/min Knife shaft rotation: 5000 rpm Manual adjustment of working height Equalizer: Total length of worktops: 2200 mm Adjustable tops Knife shaft silencing Knife shaft guard Extraction spigot: 120 mm Culaga tilting 0-45° Culaga length: 1200 mm Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 2200 mm Width: 860 mm Hnodpoq R Rkrefx Aacju Height: 1130 mm

Condition: used, Year of construction: 1996, SECOND-HAND CHAIR LEVELLING MACHINE COMEC MOD. EGS - Volt. 380/50 Hodpfx Ajwrb R Isacjnu - S/N 960416 - CE rules year 1996

Condition: used, static maximum load 3,200 kg diameter 185 mm height 45 mm Hnsdpfofii Dgox Aaceu thread M 20 x 1.5 levelling height 20 mm weight 3.4 kg - 1 unit on stock - new - price per unit  

Condition: ready for operation (used), Year of construction: 2008, working width 500mm tables length 201cm tables lifted together electric regulation of thicknesser table 4 feeding speed angle adjustment of fence main motor power 5,5kW year 2008 Hsdpfx Aajrdd R Neconu

Condition: used, static maximum load 8,000 kg diameter 260 mm height 60 mm thread M 27 x 2 levelling height 25 mm weight 8.6 kg - 20 units on stock - price per unit -   Hedpfx Asfii Dfeaconu  

Condition: ready for operation (used), functionality: fully functional, overall weight: 24,400 kg, operation weight: 23,600 kg, Year of construction: 2007, operating hours: 9,500 h, cutting height (max.): 10,850 mm, arm reach: 10,010 mm, machine/vehicle number: HCMBFH00T00201484, TECHNICAL DETAILS Working Ranges Max. reach: 10,010 mm Max. reach (on the ground): 9,830 mm Max. digging depth: 6,890 mm Max. digging depth (8' level): 6,650 mm Max. cutting height: 10,850 mm Max. dumping height: 8,050 mm Min. swing radius: 2,950 mm Max. vertical wall: 5,600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,070 mm x 2,990 mm x 2,950 mm Total weight: 24,400 kg Operating weight: 23,600 kg Rear swing radius: 1,680 mm Rear length: 1,680 mm Overall upper carriage width: 2,890 mm Overall height over cab: 2,950 mm Minimum ground clearance: 450 mm Track gauge: 2,390 mm Shoe width: 600 mm Undercarriage width: 2,990 mm Engine: Isuzu AI 4 HK 1 X Power: 122 kW / 164 HP Number of seats: 1 Operating hours: approx. 9,500 EQUIPMENT Hnedpfxexhdx Ro Aacsu Cabin Standard bucket MONO-BOOM

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 523afbb3, Year of construction: 2019, workpiece weight (max.): 10 kg, workpiece length (max.): 250 mm, workpiece width (max.): 183 mm, workpiece height (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item on time by 20/12/2025! This lot offers a complete solution comprising a printer, washing unit, and sintering unit for auction! The machine is a demonstration model and has seen minimal use! TECHNICAL DETAILS Printing Process: Atomic Diffusion Additive Manufacturing (ADAM) Build Volume: 300 x 220 x 180 mm Layer Thickness: 50 µm – 200 µm Max. Part Size: 250 x 183 x 150 mm Max. Part Weight: 10 kg Sintering Capacity: 3,020 cm³ Sintered Area: 348 cm² Sintering Time: 26 hours Max. Temperature: 1,300 °C Washing Capacity: 18,356 cm³ Washing Volume: 356 x 254 x 203 mm Basket: Stainless steel washing basket Fluid: Opteon SF79, Opteon SF80, Tergo Metal Cleaning Fluid MACHINE DETAILS Printer Dimensions Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Washing Unit Dimensions Dimensions: 609 x 685 x 1,067 mm Weight: 136 kg Sintering Unit Dimensions Dimensions: 1,270 x 510 x 720 mm Weight: 136 kg Input Voltage: 240 V Input Current: 6 A Hedjxnp Hajpfx Aaconu Input Frequency: 60 Hz EQUIPMENT Dual-nozzle printing system Heated print chamber Vacuum-sealed print bed (new vacuum pump and vacuum silencer installed in 2022) Automatic leveling

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: S-280-09.980.004, saw blade diameter: 300 mm, cutting length (max.): 5,300 mm, cutting height (max.): 2,200 mm, cutting depth: 80 mm, Equipment: scorer, TECHNICAL DETAILS Cutting Data Vertical cutting height: 2,200 mm Horizontal cutting height: 2,100 mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade diameter: 300 mm Extraction connection: 160 mm MACHINE DETAILS Dimensions (L x W x H): 7,300 x 1,500 x 3,150 mm Motor power: 5.5 kW Hjdpfx Aaexnx Aqjconu Motor voltage: 3 × 400 V EQUIPMENT - Automatic horizontal feed - Automatic vertical feed - Horizontal positioning control - Welded frame with high rigidity - Pneumatically retracting support grid - Stable latching of the saw unit at top and bottom - Retractable riving knife for cutouts - Control panel at eye level - Digital display on longitudinal stop - Roller conveyor system - Scoring unit - Workpiece-supporting bed - Extraction unit TRK - ECO version with pneumatic extraction duct control - Touch screen - Dust tested

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 723-F07, TECHNICAL DETAILS Maximum device output: up to 24,000 bottles/hour (depending on model) Operating pressure: Standard 4.5 bar ±10 % Noise level: Between 75 and 85 dB(A) ±2 dB according to DIN EN ISO 11204 Container height tolerance Glass containers: ±2.5 mm PET containers: ±2.5 to ±6 mm MACHINE DETAILS Overall dimensions: 3,000 x 2,000 x 2,310 mm Weight: 2,041.2 kg Voltage: 230/400 V Frequency: 50 Hz Phases: 3 Hedpfx Aaexl Evrecsnu Current: 10 A Power consumption: up to 8.5 kVA (depending on model) Operating conditions Operating temperature range: +5 °C to +50 °C Operating pressure (production): min. 5 bar, max. 10 bar EQUIPMENT The machine can be operated in synchronization with other devices or independently. Suitable for glass and PET containers with flexible tolerance requirements.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, pass-through height: 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Hnedjwnr A Hepfx Aacsu Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Hnedpjlrqiqofx Aacsu Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Year of construction: 2010, condition: used, DFE Meincke is known for its expertise in industrial baking equipment, particularly in the area of biscuit forming machines and ovens. Here are some general details about these products: - Biscuit Forming Machines: - Designed for high-speed production of various types of biscuits. - Capable of producing different shapes and sizes with adjustable settings. - Often equipped with advanced technology to ensure consistent quality and minimal waste. Hnsdsxazlxjpfx Aacsu - Can handle various dough types and formulations. - Ovens: - Specifically designed for baking biscuits at optimal temperatures and humidity levels. - Includes different types of ovens, such as convection, rotary, and tunnel ovens. - Feature energy-efficient designs and advanced control systems for better baking performance. - Can be integrated with forming machines for a complete production line. Peerless USA Bakery Mixing Machines: - Usage: Designed for mixing doughs and batters for various baked products such as bread, cakes, cookies, and pastries. - Types: They offer a variety of mixers, including planetary mixers, spiral mixers, and horizontal mixers, catering to different mixing needs. - Features: Common features may include variable speed settings, durable construction, and easy-to-clean designs. Some models might include programmable controls for consistent mixing results. - Applications: Peerless mixers are suitable for commercial bakeries, restaurants, and catering services, helping to improve efficiency and consistency in dough preparation. Line Capacity: 800 kg/h Biscuit Types: Sandwich type biscuit with filling Make: DFE Meincke Model : Turbu 3 Convection Oven Year of manufacture: 2009 Serial Number for Oven : 112988 Voltage: 3 x 380 V Oven Baking surface type: Wire mesh Current Icp: 6KA Current In: 140 A Made in: Denmark Mixer Manufactire: Peerless Year of manufacture of Mixer : 2010 Condition: Excellent Serial Number of Mixer: 209110 Former Manufacture: DFE Meincke Former Year of Manufacture: 2010 Controls: Siemens Type of biscuit: Sandwich type with filling Former Made in: Denmark Construction of Line: Stainless steel Available: Immediately Required Containers: 6-7 40ft

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, pressing force: 90 t, cylinder diameter: 85 mm, stroke length: 350 mm, number of cylinders: 6, TECHNICAL DETAILS Electric heating plates: 3,000 x 1,300 mm Number of heating plates: 2 pcs. Total pressing force: 90 t Cylinder stroke: 350 mm Number of levels: 1 pc. Opening height: 350 mm Press cylinders: 6 pcs. Press cylinder diameter: 85 mm Hnsdpoxnyqpjfx Aacju MACHINE DETAILS Operating temperature: 90 °C Max. temperature: 120 °C Electrical data Operating voltage: 400 V / 50 Hz Connected load: 22 kW Heating capacity: 22 kW Hydraulic unit power requirement: 3 kW EQUIPMENT Movement of the press table via rack-and-pinion and parallel guides Electronic control unit with touchscreen Digital timer for setting press time Digital input and monitoring of pressing pressure Digital diagnostics and fault display Safety circuit with two-hand control Safety pull-cord Safety support for lower press table EFC electronic flatness control Gold-anodized heating plates (Busse)

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Hsdpfx Aju A Td Tsacjnu Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: used, Year of construction: 2020, Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks: What is a Temperature-Controlled Processing Tank? A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle. Key Features - Heating and Cooling Systems: - Heaters: Can be electric or steam-based to raise the temperature of the contents. - Chillers: Usually water or glycol-based cooling systems to lower the temperature. - Insulation: Tanks often come with insulation to minimize heat loss or gain from external environments, maintaining stable internal conditions. - Temperature Control Systems: Sophisticated controllers and sensors (like thermocouples) monitor and adjust the temperature in real-time, providing precise control over the processing environment. - Mixing Mechanisms: Many temperature-controlled tanks have integrated mixers or agitators to ensure uniform temperature distribution throughout the contents. - Material Construction: Typically made from stainless steel or other materials that are resistant to corrosion and can withstand high temperatures. Applications in the Food Industry - Pasteurization: Heating milk and other liquids to kill bacteria while maintaining product quality. - Cooking: Precise temperature control during cooking processes (e.g., making sauces, soups, or jams) to ensure proper texture and flavor. - Fermentation: Regulating temperatures during fermentation processes (e.g., beer, yogurt) to ensure the right conditions for microbial activity. - Storage: Maintaining the quality of sensitive ingredients (like chocolate or dairy) by controlling temperatures to prevent spoilage. Advantages of Temperature-Controlled Processing Tanks - Quality Assurance: Consistent temperatures lead to uniform product quality, flavor, and texture. Hnsdpfx Aexm Spzoacou - Safety: Helps in maintaining food safety standards by ensuring thorough cooking or pasteurization processes. - Energy Efficiency: Advanced control systems can optimize energy use, reducing operating costs. - Versatility: Suitable for various processes including heating, cooling, and maintaining temperatures for different food products. Considerations - Control Precision: The accuracy of temperature control systems is crucial; look for tanks with advanced control features for better reliability. - Cleaning: Ensure that the tank design allows for easy cleaning to comply with sanitation standards, especially in the food industry. - Integration: Consider how easily the tank can be integrated into existing processing lines and systems. High shear mixers are essential equipment in the food processing industry, particularly for emulsifying, blending, and homogeneously mixing ingredients with varying viscosity levels. Here’s an overview of how they work and their applications: What is a High Shear Mixer? A high shear mixer is designed to create high shear forces that thoroughly mix ingredients together. It typically consists of a rotor-stator assembly where the rotor rapidly spins, creating a vacuum that draws ingredients into the m...

Condition: excellent (used), Year of construction: 2014, USED HANKOOK VTC140E – YOM 2014 – Serial Number 44L09842 - TWW Cat 7962 MACHINE CONSTRUCTION & FEATURES • Ram Type Vertical Boring & Turning Machine with C-Axis & Driven Tools. • Heavy-Duty Cast-Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Hardened & Ground Slideways to Provide Increased Stability & Rigidity. • 2 Step Automatic Gear Change. • 24 Position Tool Magazine. INCLUDED FACTORY FITTED MACHINE OPTIONS • Chip Conveyor & Chip Bucket • 30 Bar Through Spindle Coolant System • Measurement System C-Axis Scale • Transformer • Hydraulic 3-Jaw & Manual 4-Jaw Combination Chuck With4 Manual Adjustable Jaw Bodies • Automatic Tool Setting Device TOOLING INCLUDED • DINE Tool-changeable Angular Milling Head with 40 ISO Output • 2 Off Sandvik Capto C6 Turning Toolholders with Two Outputs (V & H) • 1 Off Sandvik Capto C6 Axial Turning Head • 7 OFF BT50 Driven Toolholders • 1 Off Hankook TA12B4121015043 • 1 OFF Hankook TA12B412015142 • 1 Off Hankook TA12410000161 • 2 OFF Hankook TA12417010160 CAPACITY Maximum Turning Diameter - Ø 1,600 mm Maximum Turning Height - 1,400 mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,400 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step TABLE C-AXIS Minimum Index Angle - 0.001° C-Axis Cutting Feedrate - 0 ~ 1,200 Deg / Min Max. C-Axis Speed - 3.333 RPM RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220 x 220 mm MILLING SPINDLE Milling Spindle Speed - 30 ~ 3,000 RPM Max. Milling Spindle Torque - 235 Nm TRAVEL & FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,600 mm Z-Axis Travel (Ram Vertical) - 900 mm Maximum X / Z-Axis Cutting Feedrate - 7,500 mm / Min X / Z-Axis Rapid Feedrate - 7,500 mm / Min ATC Type of Tool Holder - MAS BT 50 Tool Magazine Capacity - 24 (12T & 12M) Max. Tool Weight - 50.0 KGS MOTOR Table Motor (Cont. / 30 Min) - AC 37.0 / 45.0 kW Milling Spindle Motor Power - 15.0 / 18.5 kW X / Z-Axis Servo Motor - AC 7.0 kW C-Axis Motor - 7.0 kW POWER SOURCE Input Power Supply - 415V / 50HZ / 3PH Power Capacity - 80 KVA DIMENSIONS & WEIGHT Height - 5,535 mm Hnsdpfxsrur Nmj Aacsu External Width (With Chip Conveyor) - 6,760 mm External Depth - 4,565 mm Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES • Fanuc 32iA Control System • Through Tool Coolant • Table, Servo Drives & Motors • Through Spindle Coolant • 4 Jaw Independent Manual Chuck • Splash Guard & Safety Guard Rail • Automatic Tool Change System • X-Axis Slideway Protect Steel Cover • Lubrication Oil Cooler • Work Light • Hydraulic Power Unit • Levelling Blocks • Patrol Lamp (Red, Yellow & Green) • Automatic Guideway Lubrication System • NC Power Off • Coolant System & Wash Gun • Chip Pan • Electrical & Mechanical Manuals