Used Length Measuring System for sale (62,610)

Condition: used, Year of construction: 2022, functionality: fully functional, input voltage: 230 V, total width: 996 mm, total length: 1,311 mm, total height: 2,633 mm, overall weight: 250 kg, input frequency: 50 Hz, Equipment: documentation/manual, The InspecVision Planar P70.20 is a high-speed, non-contact 2D optical measurement and reverse-engineering system. Machine type: 2D optical inspection and measurement system Maximum part length: 1,000 mm Maximum part width: 667 mm Maximum part thickness/height: Up to 350 mm* Maximum part weight: 50 kg, evenly distributed Nwsdpozvxg Eofx Akien Measurement accuracy – length/width: ±20 / ±40 µm Point spacing / resolution: 0.18 mm Measurement speed: Less than 0.25 seconds SurfScan resolution: 0.15 mm Camera: High-resolution industrial camera Lighting: LED Software: InspecVision inspection, SPC, reporting, and reverse-engineering software CAD comparison: DXF comparison and dimensional inspection Reverse engineering: Available Power supply: 230 V, single phase, 50 Hz Maximum power consumption: Approx. 4 A Operating temperature: 10–30 °C Computer interface: USB 2.0 / USB 3.0 Approximate machine dimensions (W × D × H): 1,311 × 996 × 2,633 mm Machine weight: Less than 250 kg

Condition: used, Year of construction: 2019, operating hours: 100 h, functionality: fully functional, type of input current: AC, input voltage: 220 V, input frequency: 50 Hz, TESA TESATRONIC TT20 Measuring System with GT-31 Probe The item for sale is a used TESA TESATRONIC TT20 electronic measuring system supplied with a TESA GT-31 lever-type inductive probe. The TT20 is designed for use with one or two TESA inductive probes. It supports individual measurements as well as sum and difference measurements, making it suitable for dimensional inspection, production control, workshop applications and metrology laboratories. PRODUCT IDENTIFICATION • Manufacturer: TESA Technology / TESA SA • Model: TESATRONIC TT20 Nwjdpfx Ajwq Dp Djkion • Display unit order number / Type No.: 04430009 • Probe model: TESA GT-31 Gage Head, 10P • Probe part number: 32.10802 • Country of manufacture: Switzerland • Applicable standard: DIN 32876, Part 1 • Number of probe inputs: 2 – channels A and B TT20 TECHNICAL SPECIFICATIONS • Number of measuring ranges: 7 • Minimum selectable measuring range: ±5 µm • Maximum selectable measuring range: ±5000 µm • Display resolution: 0.1 µm • Measurement modes: channel A, channel B, sum and difference • Units: metric and inch • Range selection: manual or automatic according to the measured value • Response time of the analogue, digital and LED classification displays: ≤80 ms • Digital display holding time: 80 ms DISPLAY • Combined digital and pseudo-analogue LCD indication • LCD dimensions: 126 × 62 mm • Numerical display: 6 digits plus “+” or “–” sign • Digit dimensions: 12.5 × 6.6 mm • Pseudo-analogue scale length: 110 mm • Number of analogue scale divisions: 50 • Selectable pointer or bar-graph indication FUNCTIONS • Two probe inputs for single, sum and difference measurements • Manual or automatic measuring-range selection • Direct conversion between metric and inch units • Separate controls for each measuring channel • Programmable tolerance limits • Three-class value classification • Coloured LED tolerance indication with signal outputs • HOLD function for step-by-step measurement routines • Automatic recognition of compatible TESA probes manufactured from 1997 onwards • Bidirectional, opto-isolated RS-232 output • D-Sub In/Out connector • Power supply through an external mains adapter CATALOGUE DISPLAY VALUE LIMITS The following catalogue values apply at a temperature of 20°C and relative humidity of no more than 50%: • Analogue display: 2% • Digital display: 0.3% • Digital output: 0.3% These values refer to the TT20 display unit specification. They are not a current calibration result or a guaranteed accuracy value for this particular used set. DIMENSIONS AND CONSTRUCTION • Dimensions: 255 × 235 × 120 mm • Dimensions are specified as width × depth × height • Housing material: resistant plastic • Installation: benchtop workshop or laboratory use CONDITION Used equipment with visible signs of normal use and storage. The unit powers on, and the display and indicator lights operate as shown in the photographs. The display currently shows a selected measuring range of ±2000 µm. This is one of the available ranges and not the maximum capability of the TT20. The unit has not been subjected to a complete laboratory performance test. No current calibration or verification certificate is included. PACKAGE CONTENTS • TESA TESATRONIC TT20 display unit, Type No. 04430009 • TESA GT-31 lever-type probe, part number 32.10802, marked 10P • Connected cables shown in the photographs

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: documentation/manual, Exenso Comfort – Length stop - Exenso positioning control with storage function - Network-compatible Windows operating system - 15” touchscreen control panel - Data import: CSV file (order list) Nsdpfx Aozr Ufvekiewn - TeamViewer installed for remote diagnostics & service Automatic mode: Processing of cutting lists Connection options for barcode scanner and label printer Software: Optimization of material consumption, feedback to industry software, and more GMF radio measuring rod: Direct determination of actual dimensions TECHNICAL DATA: Adjustable lengths: Standard: 2,600 mm / 3,600 mm / 4,600 mm / 6,000 mm (special lengths on request) Accuracy: ± 0.2 mm / 3,000 mm Working height: approx. 910 mm + max. 50 mm Mounting side: right or left Operating system: Windows with HECHT Exenso software Power connection: 230 V

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: SAA81E9S0112721, Technical characteristics: System Components - XR1 Evaluation Unit: PC-based system with MarWin software - SD26 Drive Unit: Skidless tracing system with motorized height adjustment - ST-G Measuring Stand: Granite base (500 × 300 mm) with manual column adjustment Measurement Capabilities - Tracing length: 1.75 mm, 5.6 mm, 17.5 mm (DIN/ISO); 1–16 mm (ISO 12085) - Tracing speed: 0.2 mm/s or 1 mm/s - Positioning speed (X-axis): 5 mm/s - Height adjustment (Z-axis): 7.5 mm motorized - Positioning speed (Z-axis): 2 mm/s - Measuring range: ±250 µm (±500 µm with extended probe arm) - Probe force: ~0.7 mN Probe System: BFW 250 (skidless, magnetic mount for fast change) Software & Evaluation - Supported parameters: R, P, W, Motif, D profiles - Standards: ISO, JIS, MOTIF (ISO 12085) - Features: - Over 80 surface parameters - Automatic cutoff and measuring path selection - Quick & easy measuring programs - PDF report generation - ASCII export and USB data transfer - Multi-user levels and calibration reminders Hardware & Interface - PC: All-in-one or industrial PC (optional) Nodpfx Ajxx R Rnekiswn - Connectivity: USB and Bluetooth (for drive unit) - Display: Touchscreen interface with intuitive icons Accessories: - CT 120 cross table - Calibration set - Magnetic probe arm holder - Optional contour evaluation module Machine status: WORKING

Condition: ready for operation (used), Helios Preisser length measuring machine, measuring machine, measuring device with camera system Nwodpfsiwxwhsx Akijn Length x width: 1350mm x 270mm Accuracy class: Grade 0 Flatness: Actual - 5.9 µ; target - 10 µ Weight: 109 kg PC, printer, camera system, keyboard, mouse. Digital display has been checked. You are welcome to visit us for an inspection. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PB33313, For sale: high-precision optical measuring machine / VICI VISION scanner Nwodpfsz Iyp Nsx Akion - Model: MTL-300 EVO - Year: 2013 - Serial no.: PB 33313 - Weight: 110 kg For sale: a complete, high-precision optical measuring scanner – in like-new condition – designed for the accurate and rapid measurement of complex geometries, including diameters, lengths, radii, grooves, angles, and offsets between different surfaces on the same part. Capable of performing 50 or more measurements per minute. The unit comes with accessories, a stable stand, a computer, and software for generating measurement reports and certificates. Regularly serviced by the manufacturer. Connected to the power supply and ready for operation.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 09120035, total width: 970 mm, total length: 930 mm, total height: 1,620 mm, overall weight: 445 kg, Equipment: documentation/manual, type plate available, Dear Sir or Madam, We are selling our Tesa Micro-Hite 3D measuring machine. The measuring machine is in very good condition and has been well maintained. In addition, there are a number of accessories included. You can see these in the images below. Njdpfx Akszy H U Seiewn If you have any questions, please do not hesitate to contact us.

Condition: good (used), For sale is a universal length measuring device with numerous accessories from the brand Helios, in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Helios Messtechnik • Type: 27 773 001 • Control model: Unitron 2 CHA • Universal length measuring device / adjustment device / shaft measuring device • With numerous accessories for various measurements • Mounted on a workshop trolley with contents (See pictures) • Condition: Used, functional (The cable or connector of the control unit would need to be replaced, presumably not original; the display turns off after a few seconds) Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT shown. Nwsdozxiv Njpfx Akisn Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Subject to errors in technical data and prior sale.

Condition: new, EPS LINEAR – Automatic length stop system for fast and accurate operation The EPS LINEAR automatic length stop system makes it easy to quickly and accurately position materials to the desired length. The system is suitable for mounting on both new and existing machining equipment and is widely used in the wood, plastics, aluminum, and light steel industries. Simple operation, flexible application Use the clear touchscreen to enter the desired dimension, in millimeters or tenths of a millimeter. The current and set positions are clearly visible thanks to the large indicators and the clear screen layout. EPS LINEAR can be placed on either the left or right side of the machining equipment. The system is available from 1 meter and can be extended up to 14 meters. For working with short pieces, a simple attachment can be easily installed and removed. Technical specifications - Positioning speed: up to 40 meters per minute. Nwjdstd Tndepfx Akion - Holding force: 1,800 N. - Accuracy: ± 0.10 mm. - Supply voltage: 230 V, with 24 V control voltage. - Operation: start, stop, reference, measuring probe on/off, and access to parameter settings. - Position display: current and desired position. - Emergency stop: for immediately stopping the system. - Touchscreen: large indicators and a clear key layout. - Attachment for short pieces: easy to install and remove. - Software: fully developed and owned in-house, with continuous updates. - Components: industrial, maintenance-free components. - Cabling: including cable track, available up to a maximum of 14 meters. Want to know more about EPS LINEAR for your machine? Contact TM-Tools B.V. We will be happy to advise you on the options for your application. This advertisement has been prepared with the utmost care. Typographical errors and inaccuracies in the specifications are subject to change.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: Nsdpfx Ajzlh Aujkijwn ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: used, Wente CamSorik GmbH Laser measuring system / 3D laser measuring camera Wente CamSorik LaserCam_hs LC691103 Complete laser measuring system with tripod system, laptop, LaserCam_hs software, and documentation For sale is a used laser measuring system from the manufacturer Wente CamSorik GmbH. The system is suitable for non-contact measurements, 3D measurement technology, quality control, position detection, as well as industrial measuring and automation tasks. Technical data: Manufacturer: Wente CamSorik GmbH Model: LaserCam Type: LaserCam_hs Serial number: LC691103 Year of manufacture: 2018 Made in Germany Laser class: 2 Wavelength: 630–690 nm Laser power: < 1 mW Standard: EN 60825-1:2007 Network interface: Ethernet (RJ45) IP address: 192.168.1.121 Dimensions of sensor unit (approx.): 620 × 240 × 240 mm (L × W × H) Total weight including accessories and tripods: approx. 28 kg Software / Laptop: Acer TravelMate laptop LaserCam_hs Version 7.2.10.555 Wente CamSorik GmbH LaserCam_high speed documentation available Equipment: LaserCam_hs sensor unit COLA receiver / transmitter LED ring light Ethernet interface Industrial connector 2 × Manfrotto professional tripods Acer laptop including power supply Nwodpfx Aksz Ndq Heisn LaserCam_hs software Documentation Connection cables and accessories as shown in the pictures Application areas: Industrial measurement technology 3D measurement technology Quality control Robotics and automation Research and development Production monitoring Scope of supply: Wente CamSorik LaserCam_hs LC691103 2 × Manfrotto professional tripods COLA receiver / transmitter Acer TravelMate laptop including power supply LaserCam_hs software version 7.2.10.555 LaserCam documentation Connection cables and accessories as shown in the pictures Condition: Used Laptop and LaserCam_hs software have been started. Optical condition as shown in the pictures. Normal signs of wear and tear. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: PH-54114, For sale: high-precision optical measuring machine/scanner – VICI VISION - Model: MTP 120 – 230 SCEPM Nwjdpez Iyrksfx Akijn - Year: 2014 - Serial No.: PH 54114 For sale: a complete, high-precision optical measuring scanner—in like-new condition—designed for the accurate and rapid measurement of complex geometries, including radii, angles, irregular bores, gears, complex curves, ellipses, etc. The device offers high precision and is suitable for the rapid generation of inspection certificates meeting the strictest standards (e.g., for measuring Swiss watch gears). The measuring system has been maintained and serviced by the manufacturer, VICI VISION. It is an indispensable tool for serial production. The unit is connected to the power supply and ready for immediate operation.

Condition: used, This listing is for a Mitutoyo 202TP Vision Measuring System Njdpfsxzgtdox Akiewn The unit is in full working condition and is ready for immediate release The Mitutoyo 202TP Vision Measuring System is a vision measuring machine — a type of optical metrology system that uses high‑resolution imaging and software to measure the dimensions of parts without physical contact. These systems are widely used for precision inspection of components in industries like automotive, electronics, medical devices and precision engineering. Vision measuring systems eliminate many of the errors and limitations of manual microscope measurements by combining controlled lighting, high‑resolution cameras, automatic edge detection, and computer analysis to deliver accurate and repeatable measurements

Condition: used, Year of construction: 2019, Manufacturer: FARO, Type: Quantum 21000, Year of manufacture: 2019, Serial number: W25-M5-19-19502, 7 axes, Reach 2,500 mm, Single Point 0.0270 mm, 38µm, PC evaluation unit, including measuring table (custom-built), mobile, dimensions approx. 1,000 x 1,000 mm, equipment case made of plastic. Nwedsz Tiyispfx Akion +++ ATTENTION: This item is part of an online auction! +++

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, type of input current: AC, input voltage: 230 V, overall weight: 723 kg, travel distance X-axis: 235 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 600 mm, input frequency: 50 Hz, workpiece length (max.): 600 mm, ZOLLER genius 3 threadCheck – CNC measuring and setting device for threading and cutting tools, year of manufacture 2016 The machine is in technically perfect condition and fully functional. THE STRENGTHS – WHAT DISTINGUISHES THE threadCheck FROM THE genius Nwodpfx Aks Advh Hjien - One machine for all measuring tasks: The threadCheck can do everything the genius can, and with the appropriate adapter holders, it can also perform setting and measuring tasks like a venturion or smartCheck – instead of two or three devices, one is sufficient. - The threading specialist: The 6th CNC axis and the pivoting optics carrier (± 30°) align the optics with the helix angle. Thread drills, milling cutters, and thread forming tools are measured without distortion, contact-free, and with µm precision – the genius cannot do this. - Threading programs without programming: Flank diameter, pitch, flank angle, lead angle, back taper, taper; metric, UNC/UNF, Whitworth, trapezoidal, and round threads. - Grinding wheels and grinding wheel packs are detected and automatically measured via type selection (MP 410). - Fully automatic, operator-independent measurement with test protocol – reproducible, documented, and ensuring reliable handling of complaints. - Spindle ace: Run-out ≤ 0.002 mm, changeover accuracy 0.001 mm (according to the manufacturer). - Full enclosure protects against dirt and stray light – can be used directly in production instead of in the measuring room. TECHNICAL DATA - 6 CNC axes · Tool length Z max. 600 mm · Tool diameter D max. 310 mm · Y-axis ± 50 mm - Connection 1 kVA, 230 V, 50 Hz · Compressed air 6 bar ± 10 % · Weight approx. 723 kg · gray EQUIPMENT - Software update 2023 to Windows 10 with pilot 4.0 V1.19 - Optics carrier genius 4 1:1/HR70, through-light camera 1:1/HR70, top-light camera HR70 with LED lighting, CNC pivoting device - HG spindle ace size I/AF/HLG with autofocus, hollow encoder for high-resolution C-axis - Operating unit cockpit-pilot with 23" touch display, keyboard, mouse · Control cabinet ventilation - Software threadCheck with photorealistic input dialog and protocol on monitor and printer - Measuring program package inspectionPremium (target/actual comparison, item statistics, cost analysis, TMS “Silver”) - MP 212 flank diameter · MP 370 thread former · MP 851 first full tooth · MP 410 grinding wheels/packs · Macro editor lasso - Collet set Ø 4–16 mm (10 pieces) · Extraction tool · Color laser printer SERVICE AROUND THE MACHINE On request, complete technical support from a single source – according to individual agreement: Software upgrade · Installation and commissioning · Operator training · Support during operation · Demonstration · Warranty according to agreement. PROCESSING Machine in transit, delivery from 16727 Velten near Berlin · FCA Velten including loading · 100% advance payment · Delivery date by arrangement · Inspection by appointment. Data sheet attached as a PDF. Technical data according to manufacturer’s documents and information from the previous owner (information provided, no agreement on characteristics within the meaning of §§ 434, 443 BGB). We will confirm individual values bindingly during the inspection. Errors and prior sale are reserved.

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing Nodpfx Aksz Sll Tsiewn • CE marking • Device inspected (TBM inspection stickers)

Condition: used, functionality: not functional, Optical wave measuring device for measuring rotationally symmetrical workpieces (without power supply) Nedpjz Atggofx Akiswn

Condition: like new (used), total width: 20 mm, total length: 24 mm, total height: 16 mm, Liquiline CM442 Controller, ENDRESS HAUSSER - IND27827-OC - 063 Liquiline CM442 is a state-of-the-art transmitter for measuring parameters such as pH, redox, conductivity, oxygen, chlorine, turbidity, sludge level, COD, nitrate, etc. The Liquiline CM442 transmitter allows you to connect up to 2 Memosens sensors of your choice from more than 12 measurement parameters. It automatically recognizes the sensors, is easy to operate, and features standardized spare parts that are compatible with other devices in the Liquiline platform. With its inputs, outputs, controllers, and mathematical modules, you can even control cleaning systems and dosing pumps. Heartbeat Technology helps to find the ideal balance between the availability of the measurement point and maintenance costs. Liquiline CM442 is suitable for all industries and their auxiliary applications, such as: Food and beverage Life sciences Power plants and energy Water, wastewater, and waste Chemicals Marine It features the following communication protocols and interfaces: 0/4 ... 20 mA HART PROFIBUS DP Modbus RS485/RTU Modbus TCP EtherNet/IP PROFINET Web server The transmitter can be expanded with a module whose approvals for explosion protection, such as IECEx, ATEX, and CSA, allow it to be connected to sensors installed in areas with a risk of explosion. Advantages Intelligent Simplicity: one controller for all parameters and applications, with an intuitive user interface, automatic sensor recognition, and plug & play hot-swapping with pre-calibrated Memosens sensors. High Flexibility: universal modules for all parameters minimize spare parts inventory and allow the system to be expanded at any time with up to 8 channels. Direct Integration into the System: the unique portfolio of communication standards adapts to any distributed control system (DCS). Simple and Safe Commissioning: the ability to save the configuration to an SD card allows for quick commissioning of duplicated installations. Remote Process Control: integrated web server that allows the operator to remotely view diagnostic data, perform configurations, or access the equipment parameters from any web browser, even from a smartphone. Higher Availability, Lower Costs: Heartbeat Technology enables condition-based maintenance and simple verification of the complete measurement point, in addition to helping you take optimization measures. Promoting Connectivity: Liquiline Edge Module CYY7 transfers process data to Netilion, regardless of the fieldbus. This allows for an overview and the use of IIoT services. It is available in new products or as an upgrade for installed Liquiline platforms. Summary of Specifications Input 1 to 2 digital Memosens inputs Output / Communication 2 to 4 current outputs of 0/4 to 20 mA Alarm relay, 2 relays Ingress Protection IP 66 / IP 67 Nwjdpfx Akez Tl Rksion Additional Certificates EAC, cCSAus, MCERTS

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 120 mm, measuring range Z-axis: 30 mm, overall weight: 70 kg, workpiece weight (max.): 100 kg, feed length X-axis: 120 mm, feed length Z-axis: 30 mm, travel distance Z-axis: 350 mm, Equipment: type plate available, -Leasing options are available!!!- ConturoMatic CV120 contour measuring device – “simply measure contours” -Sample parts can be sent in for free measurement; online demo available after consultation. Also, ask about our leasing options; we will gladly connect you with our partner. ✅ Up to 30% declining depreciation on movable assets* ✅ Valid for investments starting in July 2025* ✅ T&S products are fully eligible for funding* Contour measuring system with feed unit and motorized Z-axis Scope of delivery: - CV120 motorized feed unit with precision guide - External control and regulation unit - Motorized Z-axis - Evaluation computer, desktop version W11/64 bit - 24" TFT monitor - ConturoMatic evaluation software; operating manual - Cable set Nsdpfx Aoq Nzd Nekijwn - CM software updates FREE!!! Technical data CV120: Feed unit (X/Z measuring axis) - Z-axis measuring range: 30 mm - X-axis measuring range: 120 mm - Measuring speed: 0.1-1.75 mm/s - Tilt adjustment: +/-15° - Automatic probe tip lifting function Z-axis - Positioning range: 320 mm, motorized Accuracy: X-axis +/- (1.2 µm + 2Lx/25) µm* [L = mm] Z-axis +/- (1.8 µm + 2Lz/25) µm* [L = mm] Note: Various accessories are available as options to adapt our CV120 to the required measuring tasks and for system expansion, such as different probe arms, universal clamping devices, or customer-specific part holders. Probe arms with tip lengths from 2.5 to 59.5 mm available... * according to specification T&S/CV120 -Subject to technical changes- Commodity code: 90318020 -2 year warranty- Photos contain special accessories that are not included in the standard scope of delivery. *For legal reasons, we are not permitted to provide any legal or tax advice on this matter, and the above-mentioned information must not be interpreted as advice. If in doubt, please contact your relevant contact persons (specialist department or tax advisor).

Condition: used, Year of construction: 1973, functionality: not functional, machine/vehicle number: 1709, SIP MUL-1000 universal length measuring machine with a comprehensive set of original SIP accessories. Manufacturer: SIP – Société Genevoise d’Instruments de Physique, Geneva/Switzerland Year of manufacture: 1973 Machine number: 1709 Measuring range: approx. 1,000 mm The machine is offered expressly in its current condition, without any guarantee regarding functionality or accuracy. Oil was detected in the area of the scale/measuring system. A detailed fault diagnosis or repair has not been performed. Nwsdpezz Hq Asfx Akion Therefore, the machine is not sold as being in working order. Inspection and your own technical assessment on-site in Mönchengladbach are strongly recommended.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, Keyence XM-C1000 Portable Coordinate Measuring Machine / Measurement System Manufacturer: Keyence Nwjdpjztzm Nsfx Akisn Model: XM-C1000 Condition: Used, fully functional For sale is a used Keyence XM-C1000 measurement system for precise 3D coordinate measurement of components and assemblies. The system enables fast and reproducible measurements without complex programming and is ideal for quality assurance, incoming goods inspection, first article inspection, and production monitoring. The XM-C1000 impresses with its ease of use, high measurement accuracy, and flexible application possibilities. Measurements of distances, diameters, positions, angles, and geometric tolerances can be performed and documented efficiently. Technical features: Portable optical coordinate measuring system Precise 3D measurements Intuitive user interface Fast inspection processes Automatic measurement reports Ideal for production and quality assurance Condition: Used Fully functional Good optical condition Normal signs of wear and tear Inspection and functional testing possible by appointment Scope of delivery: Keyence XM-C1000 measurement system Existing accessories as shown in the picture Documentation

Condition: new, HEIDENHAIN Incremental encapsulated length measuring system LS 187 – ID 526971-09 New HEIDENHAIN length measuring system, unused. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LS 187 Nedpjzcgy Usfx Akijwn ID Number: 526971-09 Device type: Incremental encapsulated length measuring system Measuring length: 940 mm Accuracy class: ±5.0 µm Pitch period: 20 µm Output signal: 1 Vpp Reference mark: In the center of the measuring length Mounting type: Integrated mounting strip Supply voltage: 5 V ±5 % Electrical connection: Flange housing, 14-pin, separate adapter cable

Condition: used, Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production -Length measuring device: used for slats/blinds production -Rotary encoder: Heidenhain ROD 426.003 - 1000 -Pneumatic components: Manufacturer Festo Nwjdpfxsgal A Do Akien -Dimensions: 350/400/H1130 mm -Weight: 80 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: ZEISS Comet®LƎD 8M, workpiece weight (max.): 5,000 kg, workpiece length (max.): 1,000 mm, workpiece height (max.): 1,000 mm, workpiece width (max.): 1,000 mm, ZEISS Comet®LƎD 8M Nodpjzwk Nbefx Akijwn

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hard Drive 500 GB (including 80 GB reserve capacity) Nwjdpfx Akow Ah Axeion Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency