Used Lead Cartridge for sale (1,743)

Condition: good (used), Year of construction: 2009, Max. intake air: 540 m³/h Max. vacuum: 220 mbar Motor: 3 x 1.1 kW; 230 V; 50 Hz Bdedexyflcspfx Aa Ijh Noise emission approx.: 77 dB(A) Weight approx.: 80 kg With integrated 2.2 m² HEPA safety filter cartridge

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new Bjdpfx Aezlqu Tea Iedh - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Year of construction: 1973, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 658, Available directly from our warehouse in Son; heavy stamping die with electric coupling, electrical system completely renewed around 2019, original build year 1973; mechanically fully overhauled in 2015, moving die resurfaced, die pins and gears replaced with new pins of a much stronger mechanical grade than originally, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this is extremely wear-resistant with the addition of Pb (lead) for better performance and good emergency running characteristics (i.e., no lubrication), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays on each channel, motorized clamping of the stamping die. Maximum stamping die size with automatic clamping 900 x 1300 mm. Safety bars are much more extensive and more robust compared to the original design, 350 tons of stamping force. Bedsxz Niuepfx Aa Iodh

Condition: used, Year of construction: 1991, grinding length 600 mm grinding width 375 mm workpiece height 375 mm workpiece weight 300 kg Bdsdpfx Aozycnnea Ish table surface area 900 * 350 mm grinding spindle speed 1500 / 3000 U/min dimensions of grinding wheel 300 x 50 x 76,2 mm weight of the machine ca. 3,3 t dimensions of the machine ca. 3,1 x 2,6 x 2,1 m MICRO GRANIT has excellent properties for high-precision grinding machine construction. Damping properties: 1:10 ratio compared to gray cast iron, ensures the best grinding quality. Thermal behavior: suitable for grinding operations with µ tolerances. X-axis – table longitudinal movement: - Table switching: extremely quiet, contactless. - Quick adjustment: via cams. - Work table: Mehanit cast iron. - Guide system: two precision flat guides. - Lubrication: plastic coating. - Drive: hydraulic, automatic. - Table stroke: 100–250 mm. - Table speed: 40 m/min. - Switching: via cams, contactless. - Hydraulics: horizontal monoblock. - Table cycle: 30 min. Y-axis – Vertical adjustment of the grinding wheel: - Play-compensating mechanism: > ensures even contact with the guides. - Vertical movement: > via precision lead screw. - Drive: adjustable electric motor.

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 250 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller manufacturer: FANUC, overall weight: 10,000 kg, spindle speed (max.): 14,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 32, number of axes: 5, This 5-axis DVK System Master 1 RE was manufactured in 2020. It features a robust working area with X-axis travel of 250 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The machine is equipped with a powerful 25 kW spindle and an automatic tool changer with a capacity of 32 tools. If you are looking to get high-quality machining capabilities, consider the DVK System Master 1 RE horizontal machining centre we have for sale. Contact us for further details. • CNC control: FANUC CNC with 10.4" colour operator panel, PLC, Ethernet connectivity, dedicated machine software • CE certified • Working area: • Birotational clamping vise axes: A-axis 360° continuous, B-axis 360° continuous • Spindle: • Type: OMLAT electrospindle • Torque: 80 Nm • Tool interface: HSK-A63 • Tool magazine/ATC: • Automatic tool changer • Max tool diameter: 70 mm (150 mm with adjacent pockets free) • Random tool selection • Clamping system: • Self-centering birotational hydraulic vise • Jaw stroke: 50 mm • Clamping force: 5,000–30,000 N • Cooling & lubrication and services: • Liquid-cooled spindle • Centralized automatic grease lubrication • Pneumatic system • Hydraulic system Bjdezp Hndjpfx Aa Iodh • Air-water heat exchanger • Machine pressurization system • Machine data: • Installed power: 55 kW • Supply voltage: 400 V / 50 Hz Additional equipment • Robot automation: • FANUC M20iA/20M anthropomorphic robot, 6 axes, 20 kg payload • Schunk PGN125 two-jaw gripper • Pallet system: • Two vertical pallet magazines • Pallet size: 480 × 300 mm • 54 pallet positions per magazine (standard) • Chip/coolant and extraction: • Internal coolant through spindle • 60 µm cartridge filter • MAHLE self-cleaning 60 µm filter • Rain-type work area washing system • Chip conveyor with drag chain and rotofilter • Coolant chiller • Oil mist extraction system • Measurement, monitoring and accuracy: • Marposs 3D radio probe • Laser tool presetter • Thermal compensation on X, Y and Z axes • Optical scales on X, Y and Z axes • Tool life monitoring • Extended work coordinate system (48 additional offsets) • Artificial vision system with 2 cameras • Clamping enhancement: • Pressure-controlled hydraulic clamping • Included auxiliary equipment: • Bonfiglio MROTOS 8555 4 E LRSA industrial parts washer, robot integrated • Automator ADP5090 dot peen marking system with AC500 controller, robot integrated: • Marking area: 50 × 90 mm • Pneumatic marking head • Connectivity: Ethernet / USB / RS232 / RS485 • Touch-screen AC500 controller • Marking speed up to 10 characters/second • Additional Machine Information: • The machine has recently been fully serviced/revised by the manufacturer. • The spindle was also included in the recent manufacturer service. • The machine has always been used for machining aluminium. • The machine is currently not in production due to a change in the type of parts being manufactured.

Condition: new, Year of construction: 2025, functionality: fully functional, With a grinding diameter of 200mm x 300mm long, the JHP-2003CNC is the most compact plunge type grinding machine in the range and utilises the FANUC Oi-TF CNC control. Designed for heavier grinding applications, the JHP-2003CNC can accomadate workholding and components to 80kgs. This fully enclosed machine is supplied with Renishaw probing, full machine enclosure and mist collector. Jainnher CNC Plunge Cylindrical Grinding Machine Description: JHP-2003 CNC Capacity Max ø work swing 200mm dia Max grinding length 300mm Max grinding dia. 200mm dia Max workpiece weight 80 kgs Distance between centres 300mm Centre height 100mm Grinding wheel Grinding wheel size Ø405 x 50 x 127 Max peripheral 33 m/sec Wheel speed 1780rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 220mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Hydrodynamic pressure ----- Tailstock Retraction of sleeve 30mm Sleeve diameter D:48mm Centre taper MT.3 Hydraulic cylinder pressure 20kg Bsdpfx Asnxk N Sea Iodh Work head Spindle speed (variable) 10~500rpm/min Centre taper MT3 Spindle type Cartridge type Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +10º/-3º Rapid traverse speed 8mm/min Max. travel 640mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 5HP 4P(opt. 7.5HP) 4P Workhead motor 1.0KW Work table (Z axis) 1.2KW Work table (X axis) 1.2KW Hydraulic pump 1/4 HP 4P Wheel head pump ----- Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 30L Wheel head lubrication ----- Coolant tank 80L Machine N.W (Fully enclosed) 3800 kg G.W (Fully enclosed) 4100 kg Dimension (Fully enclosed) 3300 x 2100 x 2200mm Packing (Fully enclosed) 3500 x 2200 x 2200mm Jainnher CNC Plunge Cylindrical Grinding Machine Standard Accessories: JAINNHER JHP-2003CNC X-axis linear scale Work lamp Foot pedal Angle adjustment gauge Hydraulic tailstock with manual movement Grinding wheel and flange Tungsten carbide tipped centres (MT3) Automatic lubrication system Diamond dresser at lower worktable Magnetic separator MC-40/coolant tank/pump Levelling bolts and blocks Tool kits and toolbox Fully enclosed splash guard & oil mist device Touch probe gauge (Renishaw) Transformer

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 spindle passage: 51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control “Balluff” clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Bdjdpoiay Sfsfx Aa Ish Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Rarely available. Idaho Little Gem 40" former for the production of potato croquettes etc. These are the industry standard machines used to produce for the World's leading fast food chains etc. Bdsdpfx Aasigrvpe Ioh

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Bdodpfx Aoyk Ip Tja Ish Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: used, Year of construction: 1985, turning diameter over bed 340 mm turning diameter over slide rest 260 mm turning length 700 mm spindle bore 48 mm spindle turning speed range 25 - 2000 U/min spindle nose DIN 55027 KK 5 voltage 380 Volt total power requirement 2,2 / 4,4 kW weight of the machine ca. 1000 kg dimensions of the machine ca. 1.800 x 700 x 1.500 mm NARDINI MS 175E â?? Robust Lead and Feed Spindle Lathe A solid and proven conventional lathe for workshops, maintenance, mechanical engineering, and demanding machining tasks. The machine impresses with its robust construction, intuitive operation, and versatile applications. It is ideal for turning, thread cutting, face and longitudinal turning, as well as for machining a wide variety of workpieces. Advantages of the NARDINI MS 175E: â? Robust, durable machine construction â? Proven conventional technologyâ??ideal for workshops and training â? Lead and feed spindles for versatile machining capabilities â? Wide speed range â? Feed and thread tables for quick and convenient setup â? Extensive options for metric and other thread types â? Well-organized control panel with clearly arranged switches and adjustment controls â? Powerful and precise machining thanks to the machineâ??s sturdy construction â? Solid machine bed for excellent stability and low-vibration operation â? Protective cover over the spindle area for additional operator safety â? Ideal for one-off production, repairs, maintenance, and small-batch production â? A machine for users who value mechanical, reliable technology over unnecessary complexity Equipment: Bdedpozlkwbjfx Aa Ioh - 3-jaw lathe chuck - Various jaws - Lathe chuck guard - Collet chuck adapter - Various collets - Multifix tool holders - Multifix adapters - Vibration-damping feet

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. Bdodezbc Dtopfx Aa Ieh The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² Bedpfx Aajhp S Tre Isdh 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg Bsdok Egrpepfx Aa Ijdh dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, turning diameter 560 mm turning length 1910 mm Bjdpfoucgr Iex Aa Isdh swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, Year of construction: 2011, Second-hand machine Year of manufacture: 2011 Condition: Machine fully overhauled and serviced Features and technical specifications: Feed speed: infinitely variable 10–18 m/min Edge Control 19 control system with 18.5-inch colour touchscreen Joint milling unit Edge feed Adhesive application station: Cartridge, feeler nozzle with automatic glue level adjustment Printing unit Trimming unit Multifunctional milling unit Copy milling unit Radius scraper unit Flat draw blade Polishing Workpiece thickness 6–60 mm Edge thickness 0.4–8 mm Min. workpiece width 60 mm Bodpfxjzk N Eue Aa Ijdh Shortest workpiece length 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: at short notice

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface Bdodjv Aalyjpfx Aa Ioh - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels, 3000x1500mm (300kg load per level) Loading and unloading system Bsdpfxoci Ik So Aa Iedh Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115, autofocus Chiller Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting Software Low-pressure gas alarm, gas pressure monitor, and software control Voltage stabilizer 48-72 KVA Enclosure according to Laser Class 4 Heavy-duty machine base. High-performance servo motors. Intelligent cutting control system, easy operation Fast tack welding, supported by segment and step tack welding technology Specialized air duct with oversized diameter, ensuring smooth fume extraction. Completely enclosed design European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet metal loading capacity 1500 kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 Machine power 32-48 kW Voltage 380V/50Hz Delivery time: 5 months (construction time + transport) Delivery to customer's premises: €3,500 Installation and training: €8,850 Industry 4.0 software: €9,500 FILTERCUBE 2H, 4.0 kW, 40 m²: €10,500 The Filtercube series is a dust extraction system equipped with filter cartridges, used for fume filtration and dust removal.

Condition: excellent (used), axle configuration: 2 axles, first registration: 03/2025, total length: 86,000 mm, total width: 2,550 mm, total height: 3,200 mm, color: grey, Year of construction: 2025, Unladen weight: 3,290 kg Payload: 11,110 kg GVWR: 14,400 kg Loading platform height: 80 cm Technical condition: very good Optical condition: very good Humbaur 2-axle center-axle low-bed trailer with loading ramps – New and unused We offer you this high-quality Humbaur 2-axle center-axle low-bed trailer in new and unused condition. This robust trailer has been specifically designed for the professional transport of construction machinery, forklifts, telescopic loaders, aerial work platforms, wheel loaders, mini excavators, and other heavy machinery. Thanks to its fully hot-dip galvanized construction, the trailer offers excellent protection against corrosion and impresses with its long service life and minimal maintenance costs. Equipment * Humbaur 2-axle center-axle low-bed trailer * New and unused * Fully hot-dip galvanized chassis * Robust steel construction * Height-adjustable drawbar * Aluminum side walls * Numerous lashing eyes/lashing hooks in the loading platform * Rear supports for safe loading and unloading * Heavy-duty loading ramps at the rear * Professional design for daily use * Low-maintenance design ## Technical data ### Loading platform * Internal length: 6,300 mm * Internal width: 2,460 mm * Loading height: approx. 800 mm Loading ramps * Length: 3,200 mm * Width per ramp: 1,120 mm The extra-long loading ramps enable a very shallow approach angle and are ideal for machines with low ground clearance. Weights * Permissible total weight: 14,400 kg * Unladen weight: 3,290 kg * Payload: 11,110 kg Standard equipment * Aluminum side walls * Height-adjustable drawbar * Fully hot-dip galvanized chassis * Numerous lashing eyes * Rear supports * Heavy-duty steel loading ramps * Complete lighting system according to EU regulations * Very stable driving characteristics * Suitable for professional continuous use Possible applications Ideally suited for the transport of: * Excavators * Mini excavators * Wheel loaders * Compact loaders * Forklifts * Telescopic loaders * Aerial work platforms * Road construction machinery * Agricultural machinery * Other construction machinery Why Humbaur? Humbaur is one of the leading manufacturers of professional trailers in Europe and stands for: * German top quality * Highest reliability * Long service life * High resale value * Excellent workmanship Bdsdpfozxgmfex Aa Ioh * Low maintenance costs This new and unused Humbaur center-axle low-bed trailer impresses with its robust construction, low loading height, high payload, and durable, hot-dip galvanized construction. This makes it the ideal solution for construction companies, rental companies, machine dealers, and transport companies. An inspection of the trailer is possible at any time by appointment in Andelst, Netherlands. Delivery condition: EXW Andelst, Netherlands. Price: On request.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,712 h, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: 0i MD, table width: 510 mm, table length: 950 mm, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis POSmill B 800 was manufactured in 2014. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 630 mm. The machine includes a table size of 950 x 510 mm and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the POSmill B 800 vertical machining centre we have for sale. Contact us for further details. - Control System: Fanuc 0i MD (Hartrol-Fanuc AI100 display interface)- Storage Capacity: 2+2 GB- Tool Changer: 24-fold ISO 40- Internal Coolant Supply (CTS): 20 bar with cartridge filter- Apparent Power: 25 kVA- Fuse Protection: 35 A- Voltage / Frequency: 400 V / 50 Hz (3-phase)- Power On Hours: 21,699 H- Run Time Hours: 10,712 H- Total Parts Count: 47,887- Standard Equipment: Active air-air control cabinet cooler, Ethernet network connection, regulated spindle cooler, opening left/right side windows, polycarbonate protective enclosure, external spiral chip conveyor, coolant head pump (M-functions), chip flushing pump & device, water gun, air gun, coolant at spindle, operating status light, electromechanical oil coolant separator, mobile electronic handwheel Bodoz Arl Ijpfx Aa Iedh Technical Specification Taper Size ISO 40

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: June 2026 Excellent condition, low operating hours (1540 hours of eroding time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Bodpfx Aozkftbja Iedh Powertec handheld, multifunctional control unit Manual eroding with Powertec handheld EAGLE Powertec - fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump: max. 18,000 mm/min. Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck: min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table load: 500 kg, OPS INGERSOLL GANTRY EAGLE 400 Year of manufacture: 2015 Completely overhauled August-September 2026 EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual eroding with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 420 x 300 x 300 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Working tank (W x D x H) 650 x 500 x 340 mm Work table (W x D) 550 x 470 mm Load capacity 500 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system The machine is currently undergoing overhaul. Bodpfxozwcfho Aa Iodh Original images will follow. 08/28.

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer stainless steel tank trailer for bitumen 32m³ TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 Bjdpfx Asr I S H Eea Iodh * ADR suitable for the transport of dangerous goods * ADR tank code ADR tank code L4BH * Tank diameter 2,000 mm * External length 11,250 mm * Height 3,600 mm * Axle distance (Wb) 6,300 mm * Axle distance (A) 1,310 mm * Rear overhang 3,580 mm * Fifth wheel height 1,220 mm TECHNICAL CAPACITY: * Volume 32.0 m3 * Empty weight ±%3 6,400 kg * Axle load 27,000 kg * King pin capacity 12,000 kg * The operating temperature is 250 °C * Test pressure (+H bar) 4.0 bar * The operating pressure is 2.0 bar * Total weight 39,000 kg TANK: * Cylindrical tank container with a slope to prevent residual quantities in the tank, made of AISI 321 (DIN 1.4541) stainless steel with ADR code L4BH * Vacuum valve The operating pressure is 0.21 bar * 1 x thermometer is included * Number of chambers 1 compartment * Insulation thickness The container is insulated with 100 mm thick glass wool * Insulation lamination Aluminum coating, CTP bomb * Final bottom coating The insulation on the front and rear bottom of the tank is coated with glass fiber reinforced polyester (GRP) * Stainless steel insulation rings fitted on the entire tank container * Number of manholes 1 pc. * 2" side air line made of aluminum on the right side of the vehicle. 2" TW coupling air line is included at the rear. * 1 x pressure gauge is included on the side air line * Equipped with a 1.5" air line for a higher delivery rate for bitumen and * to free the hoses from residues of the transported goods after unloading * 2" upper air line with 2-way sliding valve made of stainless steel * Aluminium walkway on the dome area * Mechanically foldable fall protection on the walkway in accordance with UVV * Access ladder on the right side of the container * The filling dome is on the front of the tank * There are 4 baffles in the tank DRAIN SYSTEM: * There is a DN100 bottom valve with handwheel operation on the discharge line, in accordance with the EN 14433 standard for dangerous goods. * Outlet line According to standard EN14433, outlet line starts with 4" bottom valve with handwheel control and leads to a 2nd safety valve for safe unloading (according to standard EN14432, 4" butterfly valve with mechanical control) and ends with a 3" TW coupling with internal thread and blind cover. A 1/2" sampling tap is included between the butterfly valve and TW coupling. * 1 x 6 m hose holder in an open-top box made of aluminum CHASSIS: * BPW axle with air suspension and disc brake and 3 x 9 tonnes permissible load capacity * BPW axles with 22.5" disc brake * Lift axle system on the 1st axle works automatically * KNORR-ILVL electronic air suspension ECAS * Tire size 385/65 R 22.5" 6-way * ALUMINUM rims * 1 x work light on the tank * Jost supports * 1 x plastic tool box, 400x480x600 mm OTHER: * ADR - Signum brand plate made of stainless steel, with a set of interchangeable numbers and foldable design * Danger sign in rigid design * Danger sign no: 3 * Danger sign no: 9 * Temperature sign * Environmental protection sign * 2 x fire extinguisher box without Fire extinguisher COLORS: * Chassis color RAL 3002 carmine red * Container color RAL 9006 white aluminum + paint We are happy to provide you with further information

Year of construction: 2014, operating hours: 4,000 h, condition: used, functionality: fully functional, machine/vehicle number: P260224159, Selling a complete, high-pressure waterjet cutting system, 6200 bar, manufactured by LDSA, a leading French manufacturer. The machine is in exceptional condition and has seen very little use (occasional use in a workshop). The configuration includes an ultra-high-pressure KMT Streamline Pro 60 pump (6200 bar), enabling higher cutting speeds and significant abrasive savings. Technical Specifications: Operating hours: 4000 hours (actual and verifiable) Usable format: 4,000 mm x 2,000 mm Pump: KMT Streamline PRO 60 (Power: 60 HP / Max. pressure: 6,200 bar) Overall condition: Very good, regularly maintained. Equipment and Options Included: Sludge management: Automatic extraction system SEBA (increased productivity and easy cleaning). Cooling: Oil cooler (chiller) included for optimal pump operation. Software: LANTEK CAD/CAM suite (license included). Accessories: High-pressure cutting head, CNC control panel. Bjdpfezvx Ntsx Aa Isdh Key Advantages: Maintenance: Standard KMT and LDSA components, responsive after-sales service in France. Versatility: Ideal for steel, stainless steel, aluminum, plastic, glass or granite. Availability: The machine can be viewed under power for pressure and movement tests. Logistics: The machine is sold as is, ex-works. Dismantling, lifting, and transportation are the responsibility of the buyer (possibility of arranging contact with the manufacturer for a certified dismantling/reassembly service). Location: LUNEL, France

Condition: used, internal diameter 340/440 mm grinding depth 99999 mm grinding diameter 250,350,450 mm grinding length 600 mm Bjdpod Ih Dxofx Aa Iodh centre height 125,175,225 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±10 ° longitudinal feed of the table 900 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your metrical overhauled and repainted with: -Neuem CE konformem Schaltschrank. -Neuem Werkstückspindelmotor und Regler in Drehstromtechnik. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, Year of construction: 2015, functionality: fully functional, total height: 3,840 mm, total width: 4,200 mm, total length: 10,840 mm, overall weight: 73,500 kg, Oskar Frech GmbH & Co. KG Cold chamber die casting machine DAK 1600-133 Bedpfx Aaez Eblae Isdh and additional equipment The system is used for the production of die castings made of aluminum, magnesium, or copper alloys, which are manufactured using the cold chamber die casting process. Clamping force 16,000 kN Clamping stroke 1,200 mm Casting volume 3,014 – 12,057 cm³ Total weight of the system 73,500 kg Dimensions of the system Length 10,840 mm Width 4,200 mm Height 3,840 mm The system is equipped with the following additional units: Metering furnace, manufacturer Westomat, type 1700 S, capacity 1,700 kg Mold release spray system, manufacturer Gerlieva, type GS 1600/1800 T Metering furnace, manufacturer Meltec AVDF 1800/10 K, consisting of an aluminum melting furnace and a vacuum metering unit. The entire system is designed to allow fully automated operation for die casting of workpieces when used in conjunction with automation components. All necessary interfaces for communication and monitoring are available. Oskar Frech GmbH & Co. KG is one of the leading manufacturers of die casting machines worldwide. The DAK 1600-133 is the largest machine in the smallest series currently manufactured by Frech. Automation of the die casting system, manufacturer Frech, type DAK 1600-133, using an automation cell, manufacturer Reis. These units are primarily used for removing the workpieces produced by the DAK 1600-133 die casting machine.