Used Lawn Drag for sale (258)

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) Dedpfx Ajvpalaoqvskn ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: GP147/147.2/147.3/58, 1 Vetter wall-mounted slewing crane 500 KG payload / lifting capacity Crane is available 4x!!! Type PW2.5-4.0 Dkodpfxey D D Ims Aqven Outreach approx. 4m, 500 KG - 0.5t payload With chain hoist, 500 KG load capacity (2 lifting speeds) Total weight approx. 500 kg Year of manufacture: 1999 Complete with wall bracket, jib arm, chain hoist, cable drag, trolley, and small parts Slewing range approx. 180° Item location: 75053 Gondelsheim System is fully dismantled and immediately available Fully functional condition See pictures Shipping via freight forwarder or pickup Please inquire about shipping costs by postal code.

Year of construction: 2014, condition: like new (used), machine/vehicle number: 20020235 UG, DEMAG ALU crane canopy Crane runway dimensions approx. 6x4m Payload / lifting capacity 250 KG - 0,25to Technical data of the system: Crane runway made of Demag aluminum rails 180mm with internal power supply System is supplied complete: Rails, rail connectors, trolleys, end plates, cable drag, brackets/hangers etc. incl. Demag DCS PRO2-250 NL 250KG chain hoist - lifting speed 0-16m / min !!! Demag DCS chain hoist 250KG (NEW PRICE 4700 Euro !) Can also be exchanged for a standard model DK2-250 to reduce costs - please inquire ! NEW CONDITION - installed in clean room ! Crane is disassembled and immediately available Mint condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Dedpfxjty S A Ns Aqvjkn Demag KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with lifting capacity and dimensions.

Condition: new, Technical specifications: Length: 6 m Length of cut log: 1000 – 4200 mm Main motor: 7.5 kW Diameter of processed log: 1000 mm 600 mm band saw guide wheels Frame made of 160 mm C-profile Band saw length: 4800 mm Band saw width: 40-50 mm Electric up and down drive Feed via a gear motor, continuously controlled by an inverter Support arms x 5 Saw hoist: Hydraulic Djdewavqlopfx Aqvekn ADDITIONAL EQUIPMENT Hydraulics: Log loading x 1 Drag arm team Log leveling system x 1 Log press x 1 Chain turner x 1 Hydraulic power unit: 4 kW Optional equipment: Board drop system Microprocessor cutting thickness controller ISP-10 Bark cutter/debarker Bed extension Motor: 11 kW 15 kW / 18.5 kW Electric roller Additional manual pressure Driver's seat Operator platform Desktop-stationary Additional hydraulic components / Log press / Chain turner / Powered leveling / Leveling / Loading Double-sided head lifting chains 2x16B Hydraulic accumulator Water solenoid valve Extendable support arms Loading ramp Head drive from two sides

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. Dedpfjyx N Hqex Aqvokn The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment • shopturn option Machine Benefits Technical Machine Benefits • Availability from • Weight: 6000kg • 40 kVA • 58 A In max • 63 A • 400 V • 50 Hz • Control system: Siemens Sinumerik 840D Slimline • Main drive: AC main drive 25 / 32 kW • Duty cycle: 100% / 40% ED • Spindle speed: 5000 rpm • Torque: 280 / 360 Nm • Hollow clamping cylinder • 12-position turret with tool holder • Turret diameter: 340 mm • Hinged belt chip conveyor • 4-color status signal light • Air blow through main spindle • C-axis with driven tool system for turret UDI 40 • Drive for all tool stations • Y-axis travel +90 / −65 mm • Linear guideway system • Ball screw spindle • AC servo motor with integrated absolute encoder • Glass scale on guideways • Rapid traverse speed: 30 m/min • Coolant system 8 / 20 bar • Coolant tank capacity: 600 liters • Coolant pump flow rate: 8 bar / 20 l/min • High-pressure pump flow rate: 20 bar / 40 l/min • Coolant supply via turret disk to all turret stations • Band filter system filtration grade: 40 µm • Coolant level monitoring • Integrated working area extraction max. 400 m³/h • Workpiece probe Renishaw LP2DD • Probe installed at loading and unloading station • Stylus with pneumatically actuated flap and electrical control • Measuring accuracy: 10 µm Dkodpfxsx D Nl Io Aqvjn • Function plate for additional tools • Machine cabinet temperature control max. 40°C • Electrical cabinet cooling unit up to 40°C • Hydraulic oil cooler • Remote diagnosis support via internet • Working area flushing with 3 flushing screw connections • Two separately switchable valves with 8 bar pressure • Workpiece discharge conveyor for part transport system SRA 160 • Workpiece diameter: 100 mm • Continuous workpiece transport system SRA 160 in drag chain design • Storage capacity: 30 workpieces diameter 30–70 mm max 7 kg • Storage capacity: 18 workpieces diameter 30–100 mm max 15 kg • Maximum workpiece height: 160 mm • Maximum total workpiece weight: 320 kg including pallets • Loading height approx. 800 mm • Chain conveyor belt with transport prisms • Drag chain movement controlled by NC axis • Set of drag frames • Workpiece diameter minimum 30 mm maximum 160 mm • Light barrier for workpiece transport system pick-up station • Hold-down device for loading pallets SRA 160 • Robot interface Profinet • Electrical interface for 6-axis robot via Profinet • Power chuck centering and face clamping chuck • Intermediate storage tray supported on function plate • Air blow cleaning for inner workpiece area • Measuring probe with air blow with two nozzles front and rear • Clamping pressure adjustment with motor-controlled valves • Clamping pressure programmable via NC program • Extension of chip discharge chute on chip conveyor by 300 mm • Aluminium machining package • Modified slurry pump on chip conveyor • Forced indexing of band filter • Larger chip container • Extension of plug-in screens from chip conveyor • 3D data model of machine working area in STEP and IGES format • Delivery of 3D model on CD • PLC / SPS source code including hardware configuration of Siemens control in English

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin Djdpsfz A Iljfx Aqvskn By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Djdpfjfzktzjx Aqvekn Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk. Dsdpefz I Ehofx Aqvekn

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin Dkedjfz A Iwopfx Aqvsn By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor Dodpofzciqofx Aqvokn A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 1979, condition: ready for operation (used), A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Dkedpfx Aey Aad Ieqven

Condition: used, Year of construction: 2002, Konig GS 2000 USA-K2-GB2 compact plant for round stamped, folded, stamped and long rolled products Konig Mini Rex 4000 head machine SK58-AK70 weight range 25-118 gr year of build 2002 prover with 145 useable swings, max. weight of each dough piece: approx. 100g max. hourly capacity with prover operation: 2000-2500 pieces, continually adjustable capacity without prover operation, Mini Rex Futura: 1800-4000 pieces, continually adjustable proving time approx. 8 min., with 145 swings and a capacity of 2000 pieces/hour stamping device with easily changeable stamping tools integrated forming station with pre-pressure roller, drag belt, lower and upper belt with continually adjustable speed for 2-row operation, cross separation max.180 mm Dkjdpfx Aqjwa Tn Ujvjn

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: KBK FFM, DEMAG KBK 2 - crane sky crane runway indoor crane Pictures shows an example crane runway with the below components. These are also available individually! Please ask your crane runway about your dimensions Payload / lifting capacity from 80 125 250 500 to 1000 Kg KBK 2-R turnouts left and right (with conductor rail) KBK 2-R swivel discs 890mm (with conductor rail) KBK 2-R rails curved 15 30 45 60 90 degrees (with conductor rail) KBK 2-R rails (with conductor rail) The system can be delivered completely according to your wishes Rails, rail connectors, trolleys, end plates, drag cables, holders/hangers, accessories are available Chain hoists on request Dkjdpfx Aemmbn Toqvon Very good, almost new condition Shipping by forwarding possible Demag KBK1 KBK2 and KBK3 rails are stock items!

Year of construction: 1998, condition: excellent (used), machine/vehicle number: WIT33, 1 Pfeiffer wall slewing crane 2000 KG payload / lifting load Outreach about 6m, 2000KG 2to payload with Demag DC chain hoist 2000KG (2 lifting speeds) from BJ 2015 Trolley travel + swiveling electrically Total weight around 1800 kg Year of construction 1998 Crane is still being cleaned from the foundry dust Complete with wall brackets, outriggers, chain hoist, drag cable, chassis and small items Pivoting range approx. 180° Item location is 75053 Gondelsheim Dkedpsk Iyqmofx Aqvon Plant is completely dismantled and immediately available See pictures Shipping by forwarding agent or pick-up Please inquire about shipping costs according to zip code

Condition: new, Year of construction: 2022, AVAILABLE FROM STOCK : Geka plasma cutting machine GCS P-4020 table size 4000 x 2000mm incl. plasma source Hypertherm 125A Dodpfogypcljx Aqvskn incl. PRONEST HYPETHERM NESTING SOFTWARE - GEKA CNC cutting table - Hypertherm Powermax 125A - cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for increased support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag to protect cables from damage. - Movement speed 40 meters/min. - Resolution 0.01mm. - Optional automatic lubrication on all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision). - Laser pointer to check X and Y axes for zero reference. - The effective cutting area for P-4020 is 4000 x 2000mm. - Portal height Z = 100 mm. - Table with compartements for aspiration

Year of construction: 1989, condition: excellent (used), machine/vehicle number: RES-RIO, Technical data: Dsdpfxju Rn I Ns Aqvjkn 1x Demag KBK 2 column-mounted slewing jib crane NL 500KG with Demag PK2 chain hoist (Fig. shows DK chain hoist) 5 identical cranes are available !!! Payload at full radius 500KG / 0,5to payload Height: approx. 3.55m Lower boom: approx. 3.05m Outreach: 3m Hook height: approx. 2.55m Weight complete approx. 550KG Dowel plate 40x40cm with 500KG Demag PK2 chain hoist incl. bolts, cable drag, trolley, end cap etc. Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Year of construction: 2002, condition: good (used), machine/vehicle number: RHKBK250KG, DEMAG KBK crane sky crane runway dimensions approx. 6x5m Payload / lifting load 250 KG - 0.25 tons Technical data of the system: Dkjdpjrft Nhofx Aqvsn Crane track made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drags, holders/suspenders etc. including Demag DK 250KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please request your crane runway with load capacity and dimensions without obligation.

Year of construction: 2002, condition: good (used), machine/vehicle number: RHKBK125KG, DEMAG KBK crane sky crane runway dimensions approx. 6x5m Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK2-L rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drags, holders/suspenders etc. including Demag DK 125KG Manulift one-hand chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dkjdpfx Aqsrft Nlsvon Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please request your crane runway with load capacity and dimensions without obligation.

Condition: used, mileage: 299,230 km, power: 213 kW (289.60 HP), first registration: 12/2017, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal vehicle number: 1185 * MAN A47 Lion's City M NL 293-10.5, Power output: 213 kW * Emissions standard: Euro 6 * First registration: 12/2017 - MODEL 2018 * Maintenance records from previous years available. * Sample from the maintenance log: * 04.03.2026 at 298,801 km: Air suspension bellows, rear axle, all renewed Dkodjyzlwqjpfx Aqvsn * 02.02.2026 at 295,925 km: Inner swing door, entrance 2, inspected and assessed * 20.01.2026 at 295,113 km: Lighting action, carried out * 20.01.2026 at 295,113 km: Alternator V-belt, R-engine 6-cylinder, replaced * 20.01.2026 at 295,113 km: Chassis lubrication * 20.01.2026 at 295,113 km: Interim inspection / SP * 20.01.2026 at 295,113 km: Brake caliper, disc brake, front axle, left, wheel removed, replaced * 20.01.2026 at 295,113 km: V-belt drive components, checked and assessed * 03.12.2025: Shock absorber, rear axle, left front, replaced * 01.09.2025: Engine mount, R-engine 6-cylinder turbo, left + right front, removed and installed * 25.08.2025: Coolant pump, engine D0836 LOH CR, replaced * 21.07.2025 at 277,190 km: Fuel tank, steel, replaced (removed from below) * 21.07.2025 at 277,190 km: Air suspension bellows, rear axle, all renewed * 21.07.2025 at 277,190 km: Drag link, replaced * MAN A47 Lion's City Midi * 213 kW (290 HP) / Euro 6 * From first Austrian ownership * Full maintenance history available * Low original mileage * Destination displays front/side/side/rear with Gorba control unit * Convector heating * Blower at door 2 * 2x USB sockets at driver's station * D1/D2/D3/D/N/R - Automatic transmission * Air conditioning * Manual folding ramp * Retarder * Waste bin/umbrella holder * Hand straps * Rosho video surveillance and Rosho reversing camera * 33 seats (including driver) * 49 standing places * and much more. Note: The purchaser is obliged to personally inspect the condition and equipment of the goods/vehicle! All information provided without guarantee. Interim sale reserved. Please refer to our terms and conditions.

Year of construction: 1979, condition: used, machine/vehicle number: RS82/12, Technical data: 1x Demag KBK 1 pillar jib crane NL 250KG with PK chain hoist Payload at full reach 250KG / 0.25 tonne payload Dkedpfx Aevv N Aujqvsn Height: approx. 3m UK boom: approx. 2.5m Reach: 3m Hook height: approx. 2m Complete weight approx. 350Kg with chain hoist 250Kg chain hoist incl. bolt, cable drag, chassis, end cap etc. Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Condition: new, Pressure pipe to bridge a road without hindering traffic. Ideal during drag hose fertilization or water and sludge transport. Status: New Dedpfeykcd Sox Aqvjkn

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: TK3S55321812104, type of input current: three-phase, cutting width (max.): 5,500 mm, section length (max.): 3,200 mm, TECHNICAL DETAILS Cutting Table Frame: High-precision welded frame Work Surface: Fixed Vacuum Bed: 30-zone vacuum bed Vacuum Pump Control: Available Camera for Mark Recognition: Available Cutting Head: Single cutting head Included Tools: Pen, drag knife Additional Included Tools: Drag knife, driven rotary tool (for fabric cutting blades) Drive and Control Electric motor, guide rail, and cutting support: Available Control system: Available Conveyor System Conveyor system: Belt conveyor system, allows for automatic feeding and continuous cutting Loading Device Loading device for roll material: Available Computer Workstation PC included: Available Ergonomic desktop computer workstation: Available Emergency stop button: Available Tool holder: 5 slots for various cutting tools EQUIPMENT Brand new belt available Camera for cut mark recognition available Roll material loading device available Belt conveyor system available Ergonomic PC workstation available Emergency stop button available Tool holder available PC available A relocation and re-installation service can be arranged and will cost approximately EUR 3,000. Dkedpfx Aqow Sm S Njvon

Condition: like new (used), functionality: fully functional, mileage: 7,500 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,640 mm, overall weight: 3,500 kg, emission class: euro6, color: white, number of seats: 8, number of previous owners: 1, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, cruise control, disability-friendly, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, Conversion details: Dodpfeyycfijx Aqvokn Combination conversion: - Aluminium system floor in the passenger compartment - 6 individual seats in the passenger compartment, adjustable and rotatable - 1 wheelchair space incl. diagonal shoulder belt - Interior trim set in dark grey incl. side panels, window frames, wheel arches - Electric step - Air duct incl. air outlets in the roof Special equipment: - Discover Media audio navigation system with streaming & internet (touchscreen, USB) - Electrically adjustable and heated exterior mirrors - Entry handle at B-pillar, Driver Assistance Package 2 - Interior lights in driver's cab: step illumination - Child safety lock in cargo/passenger compartment - Climatronic automatic climate control (driver’s cab) with 2nd heat exchanger and 2nd evaporator - Loudspeakers (6) - Rear view camera - Hinges for rear doors with increased opening angle - LED headlights - Comfort Plus passenger seat incl. armrests - Driver’s seat ErgoActive suspension seat (20-way adjustable, massage function) - Power sockets (12V outlets) in cargo/passenger compartment (2 pieces) - Rear privacy glass - Towbar preparation (socket and wiring) - Winter package: additional heat exchanger and evaporator, additional heater (hot water) with stationary heating function and remote control Further equipment: Driver/passenger airbags, passenger airbag switchable, automatic headlight control, exterior mirror left convex, exterior mirror right convex, integrated LED indicators in mirrors, driver’s cab floor: rubber, on-board tools, drag coefficient underbody panel, twin-tone horn, entry grip rear left pillar, entry grip rear right pillar, assistance system: hill start assist, assistance: brake assistant (HBA), assistance: front and rear parking assist, driver fatigue monitoring sensor, crosswind assist, lane assist, front assist monitoring with city emergency brake, electric front windows, 2 folding remote keys, 8-speed automatic gearbox, grab handles A-pillars, lockable glove compartment, LED cab interior lighting, LED cargo/passenger lighting, body type: high-roof panel van standard, high roof in vehicle color, fuel tank: 75 L, radiator grille with upper chrome strip, multifunction steering wheel, height-adjustable steering column, headlight range adjustment, light assistant (Coming Home, Leaving Home), truck registration, Bluetooth mobile phone interface, engine: 2.0 L - 130 kW TDI, multifunction display Plus, multimedia interface 2x USB (Type C) front, rear fog light, emergency call system, digital radio reception (DAB+), wheelbase 3640 mm, tire repair kit, tire pressure monitoring system, Euro 6d emissions standard, adjustable interval wipers, sliding door cargo/passenger compartment right, SCR system (AdBlue technology), electro-mechanical power steering, fabric upholstery/seats, 6.5x16 steel rims, engine start/stop system, power sockets (12V) in driver’s cab (2 pieces), front bumper in grey, cargo area lashing eyes, seatbelt warning system (driver/passenger), heat-insulating glass, central locking with remote control and interior operation, permissible total weight 3.50 t.

Condition: new, Year of construction: 2025, functionality: fully functional, STREET VACUUM CLEANER “ CITY ANT AQUA “ Equipment for cleaning urban areas, streets, sidewalks, parks, stadiums, railway stations, airports, parking lots, industrial areas from different waste. Street vacuum cleaner City Ant works on electrical accumulators which provide 9-hour autonomous work. It can be charged in the nighttime from the 220V. Easy-to-push vacuum cleaner can be used by one hand, noiseless. Changing the trash bag takes only 2-3 minutes. No air pollution. It can take all the waste: wood, steel, plastic, paper, carton pieces, textile waste, leaves, cigarette butt, cans and bottles (glass, plastic and metal) etc. City Ant fits different areas: concrete, asphalt, pavement, lawn, sand, etc. Technical specifications: - Electric motor - 48V / 1200W - 48V / 1200W electric drive - enabling forward and reverse travel - Waste collector type - hopper; - Vacuum power 1.2 Kw; - Maximum speed 6 km/h; - Hopper capacity 240l; - Vacuum hose Ø 125 mm; - Vacuum hose length 2,5 m; - Autonomous work time 8 h; - Charging time 10-12 h; - Wheels Ø 320mm; - Doble nebulizers; - Dust filter with an area of 16 m²; - Hill climb up to 25% - Possibility of overcoming curbs by 15 cm. - Sprayer: 2 - external and internal. Dsdpjvrilusfx Aqvekn - Warning lamp Price- 11500, 00 Euro + aqua function 1000 Euro netto