Used Lasercell 1005 for sale (170)

Condition: new, Baldor BSC1005-24 drive controller SN: BEDBA32401 - 320VDC / Output: 0-250VAC, unused in opened original packaging, 100% fully functional, scope of delivery as per photos Itedpfx Acsy Npxushok

Condition: used, Alignment and welding plate, made of cast steel/grey cast iron, heavily ribbed. Heavy-duty alignment plate. Length: 1600 mm Width: 1005 mm Thickness: 280 mm Plate thickness: approx. 85 mm, continuous Itjdpsdzqbasfx Achjk - Central hole, Ø 245 mm, 400/800 mm - Threaded holes, M 20, approx. 55 mm deep - Through holes, Ø 27 mm Weight: approx. 2.5 tons Good condition Former press table – presumably machined on both sides.

Condition: new, Siemens 1FE1082-6WQ31-5WD2 synchronous built-in motor SN:YFN0637212401005, unused in opened original packaging, 100% functional, scope of delivery as per photos Itjdpfx Ajumfwlochok

Condition: new, Siemens SIMOTICS S 1FK7044-4CF71-1RH1 servomotor SN: YFR4647557001005, unused in original packaging, 100% functional, scope of delivery as per photos Itodjx Dwaajpfx Achok

Condition: new, Siemens SIMOTICS S 1FK7044-4CF71-1RH1 servo motor SN: YFR9613345101005, unused in original packaging, 100% functional, scope of delivery as shown in photos. Iodpfxox Dwags Achotk

Condition: new, Year of construction: 2025, Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml; volume of hopper: 30L; number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Isdpfx Acov Nnlzshjtk Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Siemens 1FT6084-8AF71-4DK3 three-phase servo motor, SN:YFV645305101005, unused, 100% functional, scope of delivery as per photos Iedpfx Acjvl Uzbjhotk

Condition: new, Siemens 6ES7842-0CE00-0YE0 Software SN S VPWN1005742,unused, in sealed original box, 100% functional, scope of delivery according to photos Iedpfxspnpn Ts Achotk

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Iedpfx Aefu Iwmjchstk Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: ready for operation (used), Siemens 1FT5074-0AC01 - Z Permanent Magnet Motor, Z = see nameplate, SN: E5E86575801005. The motor was completely overhauled by Siemens and then stored for a long time. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Iedpfxei D Svle Achotk

Condition: new, Siemens 1FT6084-8AF71-4DL3 three-phase servo motor, SN:1TV846293201005, unused in original packaging, 100% functional, scope of delivery as per photos Itedpfx Aevl Uzzechjk

Condition: ready for operation (used), Siemens 1HU3074-0AC01-Z servo motor, serial number: BK257929601005 - Z = K42 (smooth shaft) with 1HU1053 20mV/min tachometer, used, in good condition, 100% functional, scope of delivery as shown in the photos. Itodpfx Acszc Twyshok

Condition: used, width: 1005 mm length: 1600 mm plate thickness incl. ribbing: 150 mm thickness of upper plate: ca. 30 mm table height over base: 750/850 mm weight: ca. 700 kg Itedpfjb Nxn Eex Achsk weight of adjusting feet: ca. 200 kg

Condition: ready for operation (used), Schroff SB 205 / 24-28 V, 2A / No. 11005 Power Supply, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Itjdpfei Ec Imjx Achsk

Condition: ready for operation (used), FTS ACG4-X105-LJSA1 AC - servomotor SN: 1005VS480475, used, in good condition, 100% functional, scope of delivery as per photos. Iedpfx Acsx Dt Umohotk

Condition: ready for operation (used), Schroff SB 201 / 4-6 V, 3 A / No. 11005-58 31061-036 Power Supply, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iodpfx Acoi Ec Iijhstk

Condition: used, Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container Ijdsb Uhruspfx Achetk -Manufacturer: Homag -Nummer: 3 pieces available -different designs -Price: per piece -Dimensions: 300/170/H190 mm -Weight: 16.8 kg

Condition: used, Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container Itjdpjb Uht Uofx Achjk -Manufacturer: Homag -Dimensions: 440/185/H240 mm -Weight: 30 kg

Condition: good (used), Collet holder, tool holder, tool holder, milling holder, milling tool, short-shaft system Itjdpfx Aehupulochjk -Manufacturer: DEPO, milling mount SK50 -Type: 100 5 77 -Milling tool holder: conical, Ø 34/24 mm M16 -Dimension total Ø97x385mm -Weight: 5.9 kg

Condition: used, Saw blade, wood saw blade, circular saw blade -1005 MEC -Ø 293 x 3.5/3.0 x 60 -Z72 = T 51.13 -n max. 8000 -Price: per piece Itjdpfx Aeb Uhlzechek -Number: 1x available -Weight: 1.1 kg/piece