Used Laser Metal Cutting for sale (41,657)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! Ndodezncm Hepfx Aqwea TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Condition: used, Year of construction: 2014, ROFIN SCx30HP10.6SMNC CO₂ laser source with control cabinet – Year of manufacture: 2014 For sale is a used ROFIN SCx30HP10.6SMNC CO₂ laser source from an industrial application, including the existing control cabinet. The unit is in very good used condition and was in operation until it was professionally dismantled. Since the dismantling, the unit has not been re-tested. Technical data laser source Manufacturer: ROFIN Type / Model: SCx30HP10.6SMNC PN: 004-0243-00 Serial number: SCX30/9812 Revision: 5 Year of manufacture: 09/2014 Weight: approx. 63 kg Protection class: IP54 Tube: 44K Tube SN: 441797 Further PN: 002-0023-00 Laser specifications according to the nameplate Laser class: 4 Wavelength: 9 µm – 12 µm Average power max.: 500 W Pulse power peak max.: 1,500 W Pulse duration max.: 400 µs Equipment / Scope of delivery ROFIN SCx30HP10.6SMNC CO₂ laser source Control cabinet included Sale according to the pictures Further accessories are only included if visible in the pictures or expressly mentioned. Condition Very good used condition. Dismantled from a running industrial system. In operation until dismantling. Ndedpfx Aozu Iwdoqwsa Not re-tested after dismantling. Dismantled and stored. Technical data, condition and completeness should be checked by the buyer before purchase. Subject to prior sale and errors.

Condition: used, functionality: fully functional, operating hours: 28,922 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, controller model: ByVision, laser type: fiber laser, laser source manufacturer: MaxPhotonics, laser hours: 9,467 h, laser power: 8,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 169 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 890 kg, type of input current: three-phase, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, Bystronic ByAutonom 3015 – Fiber laser cutting machine (retrofit 2024) A very complete and production-ready flatbed laser cutting machine from Bystronic. Built in 2014, it was fully converted in 2024 from CO2 to a modern 10 kW fiber laser (MaxPhotonics), including CE declaration for the conversion. The machine is currently in production and combines the robust Bystronic platform with an automatic pallet changing system and a high degree of automation with the speed and low operating costs of fiber technology. Technical specifications: • Brand / model: Bystronic ByAutonom 3015 Nsdpsznt I Uefx Aqwjda • Year of manufacture: 2014 – fiber retrofit 2024 (with CE declaration) • Laser technology: fiber 10 kW – MaxPhotonics • Cutting head: RayTools BS08K smart cutting head with autofocus • Working area: 3,000 x 1,500 mm • Pallet changer: automatic pallet changing system, changing time approx. 22 s, load capacity 890 kg per pallet • Cutting capacity: steel up to 25 mm (O2, up to 40 mm possible), stainless steel up to 25 mm (N2), aluminum up to 20 mm, brass up to 20 mm • Dynamics: simultaneous 169 m/min, acceleration 30 m/s² • Accuracy: position deviation 0.1 mm/m, repeatability accuracy 0.05 mm • Control system: Bystronic ByVision with 22" touchscreen • Operating hours: approx. 28,922 hours machine / approx. 9,467 hours laser production Equipment / options: Automatic nozzle changer (40 positions), automatic nozzle centering with collision detection, filter system (DFPRO 6-3000), conveyor belt for scrap and small parts, extra laser protection windows front and side. Included: All documentation (digital), support & assistance, certified pre-purchase inspection, webshop with discount account. Optional (turn-key delivery possible): Dismantling, transport (including insurance), installation, base plates & anchoring, CAD/CAM software (advanced), extended warranty, smart factory connection, machine & software training, FastCal calculation software and portal. Interested in this machine? Please contact us for more information, a viewing, or a price indication.

Condition: used, Year of construction: 2019, machine/vehicle number: A1221E0017, Machine number: 113, Laser TruDisc 4001 (FD27), serial number: L5211E0465, year of manufacture: 2019, separate cooling unit KLH L0/5TK or RL14/0TK, serial number: H00748 ff., year of manufacture: 2019 each, separate cooling unit for laser and machine, camfil MF8.5A2 separate extraction unit, serial number: 855038512, exchange table, approx. 1.7 x 3 m, light curtain system, control unit, recorded operating hours (November 2025) 37,215 h, laser on: 22,614 h. Nedpfx Aqjzqzc Eswsda

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on time: 12,577 hours Nedpfx Aqjznir Aowoda Laser on time: 68,745 hours including Sheetmaster

Condition: used, functionality: fully functional, Year of construction: 2017, Loadmaster 1530, year of manufacture 2017 Ndsdpozlwz Hofx Aqwoa immediately available.

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: N0023A1180, Litmaster 1530, manufactured in 2015. Ndedezlwzaepfx Aqwea In good condition, immediately available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 3,200 h, laser type: fiber laser, laser power: 6,000 W, workpiece length (max.): 4,000 mm, workpiece width (max.): 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 6,000 W Sheet metal format: 4,000 mm x 2,000 mm MACHINE DETAILS Control type: CNC control Laser type: Fiber laser Laser source manufacturer: IPG Laser source model: YLR Operating hours: 3,200 h Nedpfx Aszldx Ssqwsda EQUIPMENT QBM Precitec cutting head Cooling unit Fume extraction Dust extraction

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Ndjdpfohwaapsx Aqwoa Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Ndedpfx Ashwaa Esqwja The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Ndedpfxehwhfuj Aqwsa CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Specifications • Working Area: 2500 mm × 1800 mm • Laser Source: CO₂ laser, with available power options ranging from 60 to 600 watts, utilizing sealed-off laser technology for consistent performance • Mechanical Tools: Supports a variety of tools, including routers, oscillating knives, drag knives, kiss-cut knives, and creasing wheels • Control System: Equipped with Zünd's ZCC V3 software, facilitating precise control over cutting operations • Additional Features: o Optical registration camera for enhanced precision Njdpfxowm Nu De Aqwoda o Integrated conveyor system for efficient material handling o Modular design allowing up to three tools to operate in parallel

Year of construction: 2007, condition: ready for operation (used), A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible. Ndodpeztdr Uefx Aqwoa

Condition: used, Year of construction: 2015, Technical details: Ndjdpfx Aqjzl D Exewea table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 63,000 h, laser type: fiber laser, laser hours: 48,000 h, laser power: 3,000 W, Equipment: CE marking, documentation/manual, Model: TruLaser 5030 fiber (L41) Year of manufacture: 2013 A new cutting head was installed in 6/2026! Machine hours: 63,000 machine hours, 48,000 laser hours Njdpfxezrxdvj Aqwoda Working area: 3000 x 1500 mm Standard equipment Machine • Enclosed machine frame • Torque drive in combination with linear direct drives • Enclosed beam guidance via fiber optic cable • Machine cooling unit (water-air) • Integrated control cabinets with interior lighting • Automatic pallet changer in the longitudinal direction • Wide longitudinal conveyor belt • Power supply for TruDisk via the machine • Work area lighting • Positioning laser diode • Spray device • PierceLine • FocusLine • NitroLine • PlasmaLine • Automatic nozzle cleaning TRUMPF Laser • Solid-state laser TruDisk 3001 with one fiber optic cable outlet • Fiber optic cable according to standard layout • Laser cooling unit (water-air) • Excitation via pump diodes • Laser power control • Laser logbook function Cutting head • Universal cutting head with fully adaptive lens system • Protective glass against lens contamination • Condition monitoring of the protective glass • ControlLine: Height control and sheet edge detection Control system • Control system SINUMERIK 840D SL • 17" touch color screen • Simple workshop programming • Advanced workshop programming • Fast reproduction • Integrated technology data • Automatic shutdown • FastLine • AdjustLine • Teleservice via internet data transmission • USB interface • RJ-45 network connection Safety • CE marking • Light curtains • Multi-chamber extraction system • Integrated compact dust extraction system • Fire alarm system in the compact dust extractor • Machine enclosure, certified viewing window, door on the right • Electric roll-up roof

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Njdozikcfopfx Aqwoda Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Ndjdpfezikb Ujx Aqwea Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: good (used), Year of construction: 2004, total height: 500 mm, overall weight: 500 kg, total width: 800 mm, rotary table diameter: 180 mm, table load: 200 kg, Metal cutting Tooling Nikken - CNC180 Ndjdszhlb Hjpfx Aqwsa MACH-ID 9663 Make: Nikken Type: CNC180 Control: ULTIMAX Year: 2004 Table Ø: 180mm Table load:200 Length: 1200mm Width: 800mm Height: 500mm Weight: 500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Nodpfxozlic Nj Aqweda Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Laser power: 40000w/30000w/22000w/20000w/12000w/6000w/3000w Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 4000mm*2000mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs. Ndedpfxsg Db Ufe Aqwja 2. Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost.

Year of construction: 2008, condition: ready for operation (used), A Trumpf CNC laser cutting machine is offered. Working area X/Y: 3000mm/1500mm, Z-axis travel: 115mm, laser power: 5000W, max. material thickness steel/stainless steel/aluminum: 25mm/20mm/12mm, operating hours: approx. 35000h, laser operating hours: approx. 13000h. The following components were replaced: E/R module in 2024, power tube in 2020 and blower turbine in 2016. Overall dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12t. An on-site inspection is possible. Nedpfx Aezrhg Hjqweda

Condition: new, Year of construction: 2026, laser source manufacturer: TRUMPF, laser power: 6,000 W, Equipment: CE marking, TruLaser 1030 Lean Edition Offer Cost-Effective Swiss-Made Machine Efficient and Powerful Laser Cutting When it comes to laser cutting, value for money counts: the sturdy machines of the TruLaser Series 1000 Lean Edition perform their tasks efficiently and economically. With their relatively low investment cost, they are profitable even at low utilization rates. With 6 kW of power, they cut all materials up to 25 mm thickness and deliver top-quality results. Get started immediately: the machines are intuitive to operate, and cutting data is already integrated. Wide Range of Materials and Features Mild steel, stainless steel, aluminum, copper, brass, and FlyLine Technologies and processes for maximum process reliability and durability Ndodsxn Irbspfx Aqwea Collision protection, nanojoints Easy Operation Pre-qualified cutting data, cutting guide, online lens monitoring, multi-sheet processing, fully automatic pallet changer Including: - TruLaser 1000 Lean Edition - Fully automated pallet changer and 6 kW laser - Programming software - Training & Services: * E-learning package for programming software * Operator training for software * Operator training for the machine TRUMPF Quality Worldwide, our rapid remote service support addresses your needs quickly and reliably. For further technical details, please refer to the technical data sheet or visit our website. If you have any questions, don't hesitate to contact us. About TRUMPF: With 100 years of company history, we've helped shape thousands of sheet metal fabrication operations in Germany alone. We share this experience every day with our customers. Thanks to innovative machines and features, the most comprehensive service concept on the market, and our experts in software, automation, and smart factory solutions, we always provide tailored offers to meet your requirements. PS: We are also happy to support you with financing. TRUMPF Financial Services offers financing, leasing, and pay-per-use models to help you successfully overcome financial and business challenges.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 8,500 mm Y-axis travel: 400 mm Z-axis travel: 95 mm A-axis: Spindle rotation A1-axis: Tailstock rotation V-axis: Bar support on processing line (90 mm) W-axis: Workpiece support relief (85 mm) X1-axis: Tailstock travel (610 mm) Laser power: 2,500 W Max. tube diameter: 140 mm Max. tube length: 8,500 mm Square tube: 12–120 mm side length Table length: 8,500 mm Working length: 8,500 mm Max. bar length: 8,500 mm Max. total bar weight: 130 kg (15 kg/m) Workpiece total load (max.): 4,000 kg MACHINE DETAILS Control: Sinumerik 840D Laser type: CO laser Laser source model: Rofin DC 025 Input power type: Three-phase Compressed air connection: 6 bar Dimensions & Weight Dimensions (L x W x H): 17,536 x 4,604 x 2,237 mm Total weight: 10,000 kg Nedeypayuepfx Aqwjda Operating hours: 22,500 h EQUIPMENT CE marking Documentation/manual Chiller unit Dust extraction Cutting head: Autofocus with capacitive sensor and collision protection Automatic bundle loader with alignment, measuring, and separation system Scimitar tube transfer system CNC-controlled tube support system with 5 active support units Intelligent part ejection with conveyor belt for short pieces up to 300 mm Fume extraction: 2,000 m³/h with high-performance filtration system Cooling: MTA TAE 121 chiller, 260-liter cooling circuit Hydraulics: 25-liter tank, 25 l/min pump, 70 bar system pressure

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, laser power: 6,000 W, CNC Laser Cutting System TruLaser 3040 Fiber (L81) 6000 Watt X Working area max.: 4000 mm Y Working area max.: 2000 mm Z Working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Operating hours: 18581 hrs. Laser beam on: 13125 hrs. Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 25 mm Sheet metal thickness copper max.: 10 mm Standard Equipment Machine: Working area: 3000 x 1500 mm Closed machine frame Cooling unit for machine and laser (water-air) Longitudinal conveyor Motion unit for highly precise machining Work area lighting Position laser diode Spray device Automatic nozzle cleaning Gantry drive in combination with linear direct drives Integrated control cabinets Integrated cabinet Closed beam guidance via laser light cable (LLK) Machine status indicator Machine ambient temperature 5 to 35 °C Laser: Excitation via pump diodes Laser power control Cutting head: 1-cutting head strategy Universal cutting head with adaptive lens system Protective glass Online condition monitoring of the protective glass Control system: Fast reproduction Control system SINUMERIK 840D SL Ergonomic control panel with 21.5″ wide-screen multi-touch color display Integrated technology data Copper cutting package • Cutting data O2 and N2 Brass cutting package • Cutting data N2 Automatic shutdown Programmable cutting gas / pressure selection Microweld Remote support interface Multi-sheet processing (• Not possible in combination with automation) Condition Guide Functions: AdjustLine ControlLine FastLine FlyLine NitroLine PierceLine (• Additionally available from TruDisk 6001: Regulation and monitoring of the piercing process) FocusLine Data transmission: USB interface RJ-45 network interface Central Link Online Update Manager • Automatic download of updates via remote support connection • Installation of the updates when the machine is switched on or by the customer or by TRUMPF service • To use, the Online Update Manager must be activated; deactivation is possible at any time by the customer. Safety: CE marking Light curtains Multi-chamber extraction system Machine enclosure with certified viewing pane, door on the right Extended Standard Equipment: Compact dust collector Sliding roof Automatic pallet changer in the longitudinal direction Support rails made of structural steel External solid-state laser TruDisk 3001 with 1 LLK output Power supply for TruDisk via the machine Nedpfozln Udex Aqweda - External solid-state laser TruDisk 6001 - BrightLine fiber - Nozzle changer - Copper cutting package - Brass cutting package - Mobile Control App - Viewing pane, door on the left - HighSpeed Eco - RCI interface - CoolLine - DetectLine

Condition: used, functionality: unexamined, If you need more details, feel free to write. Njdpfx Aqewp Dfcsweda