Used Laminator for sale (737)

Condition: used, functionality: fully functional, machine/vehicle number: 1591, Industrial flatbed heat press COMAS Tipo 85, suitable for sublimation printing, lamination, or thermal transfer on textiles, films, and composite materials. The machine was purchased but never put into operation. It has been stored in a dry environment and is in good physical condition. Godpsxryylefx Admstt Equipped with VAHLE KEK 5/60 power feed system (industrial conductor rail). Heavy-duty construction, ideal for workshops or small production facilities needing reliable thermal pressing capacity.

Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Vacuum glass laminating system Glass laminating system, with 2 heating devices TOOL TEMP Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Transport roller conveyor Lifting device Heating plates Chamber frame Gtedpfjdkp D Hsx Admet Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Transport pallet Lifting frame Control with control panel Technical data: Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Heating temperature directly adjustable on the pressurized water temperature control device (max. 140

Condition: new, Year of construction: 2025, Vertical Form, Fill and Seal Machine Filling machine for tubular bags / portion sachets, filling range 1ml–500ml (depending on requirements) Bag style: Three-side seal pouch Dosing system: Piston pump Bag size: Length 30–160mm, width 30–100mm The bag length can be set on the touchscreen or automatically via print mark, with no need for additional format parts. Different bag widths require format parts. Filling range: 1–50ml Stepless adjustable speed User interface: Touchscreen PLC Packaging material: Heat-sealable film laminates Machine material: Stainless steel SUS304 Power: 220V, 50Hz Material: Stainless steel Easy positioning with rollers Gtjdpfx Adex Dx Nvomst Further information and additional machines on request.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours Gtsdpfx Adjt Nfarsmst WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, AUTOMATIC LAMINATING MACHINE ECOSYSTEM MODEL DRY USA 76 -Year 1996 -Max sheet size 88x106 cms., Min. size 25x25 cms. -Working area : 76 cms. width -Paper from 80 to 600 grms/ sqm -Max speed dry 40 m/min - 6.000 sh/hour -High pile Gjdpfx Aox Ncf Uedmett -Dimensions: w/l/h 1850x4540x1800 mm -Total weight: 2220 kg. -Max temperature : 115/130 degrees -Thermal energy: Heating-electric resistance -Oil cooling system -Can process all types of thermal films as OPP, PET, Acetate with gloss, Matt, Metalized or Holographic finish -Heat cylinder with two electric resistances, automatic rotary cutting system in delivery -Manuals, tools and all parts -Available in January

Condition: ready for operation (used), Year of construction: 1996, A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible. Gedpfx Ajx I Rprsdmett

Condition: good (used), Year of construction: 2010, functionality: fully functional, Bavelloni laminated glass cuting table LAMY 370 S + float table REV 372 SR max. cutting lenght : 3700 mm min thikness : 3 + 3 mm + PVB Gtodpfxsxfamle Admet max. thikness : 8 + 8 mm + PVB machine dimensions : 5740 x 3600 mm

Condition: excellent (used), Vivid Easymount EM-1650DH Manufacturer: Vivid Laminating Technologies Easymount EM-1650DH Laminator Description: For sale is a professional laminator Easymount EM-1650DH from Vivid Laminating Technologies. This machine is ideally suited for print shops, sign makers, or graphic studios, and enables high-quality double-sided hot lamination up to 1650 mm width. Overview & Applications: The Easymount EM-1650DH is a powerful, double-sided heated wide-format laminator designed for professional use in print finishing and sign production. It is excellent for: - Posters, graphic prints, signs - Mounting onto boards - Pop-up displays - Vinyl, adhesive films, and application tapes - Outdoor advertising and banners The machine enables both hot and cold lamination, as well as mounting work with double-sided lamination for precise results. Features & Benefits: - Professional-grade double-sided hot lamination - Robust industrial quality for daily use - Ideal for banners, posters, signs, roll-ups, displays, etc. - Also suitable for board mounting - Easy operation via clear digital panel - Compatible with all common 3" film rolls - Optional accessories available (e.g., take-up system, additional mandrels) Gtodpfjw Ebckjx Admot Model: Easymount EM-1650DH Series: Code EM-1650 Max. Film Width: 1650 mm Model Type: DH = Double Hot (heated upper & lower roller) Suitable for: professional double-sided hot lamination Technical Specifications: Feature / Value Laminating speed: 6 m/min Laminating width: max. 1650 mm Max. material thickness: 25 mm Roll diameter: 130 mm Warm-up time: approx. 20–25 minutes Roller heating: Infrared (internal) Temperature range: 0–130 °C Control panel: Digital Pressure adjustment: Manual with display Film core: 75 mm (3") Dimensions (W×D×H): 1990 × 650 × 1255 mm Power supply: 220/240 V, 32 A, 3200 W Weight: 365 kg Condition: used Scope of delivery: (See image) (Changes and errors in technical data and specifications reserved!) Shipping: Pick-up preferred, shipping by freight forwarder possible upon request! For further questions, please feel free to contact us by phone.

Condition: like new (used), Automatic pressing line (short cycle), useful to apply veneer, paper or laminates, composed of: V03022) Loader (Portal) "SAG" Double-station (of pick-up) with central motorized rollers table V03023) Brushing machine (to top and bottom clean the panels) "POLIMA"  V03024) Glue Spreader "OMMA" V03025) Motorized Conveyoring Disks way "OMMA" V03026) Preparing table for the panels and motorized in-feed carpet to the press "SIMI" V03027) Short cycle hot hydraulic Press "SIMI IMPIANTI" mm 1400 x 4500, with No. 10 pressing cylinders Gjdpfodun Nijx Admott V03028) Unloader-stacker (Portal) "SAG" Double-station (of storage) with central motorized rollers table

Condition: used, maximum load weight: 1,205 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 07/2005, next inspection (TÜV): 06/2027, loading space length: 3,650 mm, loading space width: 1,900 mm, Platform tipping trailer from municipal ownership Load area length: 3650 mm Load area width: 1900 mm 1st owner Next inspection: 06/2027 ----* additionally, foldable loading ramp * Permissible gross weight: 1500 kg Gedexyvm Dopfx Admjtt * Unladen weight: 295 kg * Floor made of laminated panels * Base frame and superstructure galvanized Condition: normal and functional

Condition: used, Year of construction: 2024, Version: Joos A.B.S. safety system to protect the heating plates in case of incorrect loading or parts left behind. The press is open on all sides, features a robust all-steel construction, and is protected against overload. The maintenance-free hydraulic system is integrated into the oil tank. Step-less pressure adjustment is performed according to a clear pressure diagram. Once the set pressure is reached, the system switches off automatically. Constant pressure is maintained throughout the entire pressing process. The rack-and-pinion guide ensures stable parallel travel of the pressing plates. The press is optimally suited for laminating flat surfaces using adhesives, provided the corresponding technical requirements are met. Technical Data: - Max. pressing force: 1200 kN - Adjustment range: 10 – 100% - Total pressing area: 3100 x 1350 mm - Specific pressure at full capacity: 3.0 daN/cm² (kg/cm²) - 6 cylinders, 80 mm diameter, 400 mm stroke - Hydraulic working pressure: 398 bar Gtodpfx Adoxplbcjmjt - Press room height: 400 mm - Color: Light grey, RAL 7035 Hydraulics: The following components are integrated into the press's hydraulic system: - 1 oil-hydraulic two-stage high-pressure pump - 1 three-phase motor, 2.2 kW - 1 automatic pressure switch - 1 change-over valve - 1 pressure diagram The hydraulic unit is built into the lower section of the press. Controls: Automatic pressure control via electronic controller with setpoint and actual value display. Operation is performed via a clear control panel. The control cabinet is fully integrated lengthwise in the upper section of the press. Operating voltage: 400 V, 50 Hz, 3-phase. ELECTRIC HEATING PLATE 3100 x 1350, GOLD ANODIZED One lower and one upper electric heating plate, 3100 x 1350 mm. The surfaces are anodized, making them extremely hard, scratch- and abrasion-resistant. High-temperature insulation between the heating plate and the press table. Maximum operating temperature: 120°C. (1 section / 2 heating plates.) TEMPERATURE CONTROL Temperature control R 1.1; each heating plate features an electronic temperature controller and a safety temperature limiter around the edge of the heating plate. SWIVEL PANEL OPERATION Operation is via an ergonomic swivel panel control. Location: Rieth

Year of construction: 2006, condition: ready for operation (used), This SELCO EBT 108 was manufactured in 2006. A robust CNC Panel Saw with a cutting length of 3200 mm and height up to 80 mm. Features include a main saw motor power of 9-11 kW and feed speeds up to 100 m/min. Ideal for precise cutting of MDF, chipboard, plywood, and laminated panels. Weight around 6000-7000 kg. Contact us for further details regarding this machine. Gtodpjx D Nd Rsfx Admot Application Types Sawing (Wood)

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 01/2026, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,051 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * Hill start assist * Exhaust gas concept, EU6 AR * Trailer hitch, rigid (incl. towing bar) * One towing eye at the front * Airbag for driver and front passenger with passenger airbag deactivation * Roof gallery with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling to the side * Outside mirrors, electrically adjustable, heated and foldable * Outside mirrors left & right, convex, with integrated LED indicator light and wide angle range * Front-wheel drive * Emergency brake assistant (for adaptive cruise control ACC up to 160 km/h) * Battery 520 A (92 Ah) * Rubber floor in the driver's cab * Tailgate/rear doors covered * Electronic stabilization program (ESP) and ABS with electr. Differential lock * Operating voltage 12 V * CO2-optimized version with stone chip protection * Rear step, over half the width * Operating permit supplement C42 * Electronic immobilizer * Front and rear parking sensors and side protection assistant * Entry handles on the rear pillars * USB dual-function module 45W * Daytime running lights with driving light switch (automatic), "leaving home" and manual "coming home" function * Panel van Plus * Premium interior noise reduction measures * 4th self-engine 2.0L Agg. 03N.G * Adaptive cruise control (ACC) with speed limiter and stop function * 8-speed automatic transmission * Glove compartment with lockable flap, illuminated * Plastic entry handle on the B-pillar in the passenger compartment * Climatic air conditioning in the driver's cab * LED headlights with LED daytime running lights * 2 standard interior lights in the passenger/cargo area * Child safety lock in the passenger compartment * Standard climate zones * Rear view camera "Rear View" * Multifunction steering wheel (3 spokes) * 4 speakers: 2 tweeters, 2 woofers * Multifunction display "Plus" * Fatigue detection * Wired & Wireless App-Connect * Body engine 2.0 l/130 KW (4V) BIT, Common Rail basic engine is: TK1/TK4 * Navigation device standard with media and internet package * Fog lights including cornering lights * Online service, with OCU, with head unit coding, without WFS network * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * MAN Media Van Business * 12 V socket and 2 cup holders in the instrument panel * All-season tires * Long wheelbase 4,490 mm * Three-point automatic seat belts with belt height adjustment and electric. Belt tensioners at the front * Rear wing doors with increased opening angle * Side windows at the front and rear and rear windows in heat-insulating glass, darkened from the B-pillar (privacy) * 12 V sockets in the driver's cab * "ergoComfort" suspension seat on the left * "Comfort" seat on the right * Belt control, E-contact in the belt buckle, extended safety equipment * Seat covers in "Toronto Grid" fabric * Seat heating, adjustable running * Side marker lights * Approved as 3.5t * Start-stop system with brake energy recovery * Lane change assistant with active lane keeping assistant * Crosswind assistant * Windscreen wiper interval control with light and rain sensor * Central locking with radio remote control and interior operation * Digital radio reception (DAB+) * Front axle, reinforced (2,100 kg load capacity) * Lashing eyes for securing loads * Laminated glass windscreen in Heat-insulating glazing, heatable * Permissible total weight 3,500 kg Gtsdpfox Ipflox Admet * Additional water heating, programmable, with radio remote control * 2nd heat exchanger (under the right seat box) * App

Condition: used, Nirox Sensor Nirox multi-Thick-MS1-CH1 Nirox multi-Thick-MS1-CH1 – Sensor for Multi-Layer Thickness Measurement For sale is a high-quality optical sensor of the type Nirox multi-Thick-MS1-CH1, designed for precise, non-contact measurement of multi-layer materials such as plastic films, composites, or coated substrates. This sensor system is ideally suited for quality control in the plastics or packaging industries. Technical highlights: Model: multi-Thick-MS1-CH1 Manufacturer: Nirox s.r.l. (Italy) Function: Optical precision sensor for micrometer-accurate layer thickness measurement Measuring method: A-Scan / optical interference analysis Channel: 1 (CH1) Fields of application: Inline measurement in production lines or for laboratory use Typical materials: Multi-layer films, coated glass, technical laminates Condition: used Scope of delivery: (see image) Sensor multi-Thick-MS1-CH1 Connection cable Gtedjw Elmyjpfx Admot (Subject to changes and errors in technical data. All information is provided without guarantee!) If you have any further questions, we are happy to assist you by phone.

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” Gtsdpfxjcr U Uro Admjt SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: used, mileage: 290,457 km, power: 353 kW (479.95 HP), first registration: 07/2022, fuel type: diesel, overall weight: 19,500 kg, color: white, gearing type: automatic, Equipment: air conditioning, soot filter, Vehicle number: 253284 1st owner, accident-free, full service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system Gjdpfxewz T T Hj Admett INTERIOR * Auxiliary air conditioning TECHNOLOGY & SAFETY * Central locking system OTHER EQUIPMENT * ZF Intarder Further features * XG driver’s cab * Adaptive cruise control with FCW and AEBS-3 * Emission standard Euro 6 * Automated gearbox, TraXon, 12-speed * DAF Connect * LED headlights and fog lights * Windscreen with sun protection film * Laminated glass with sun protection film * DAF Digital Vision System * DAF Corner View * Adjustable roof spoiler for XG cab * Extended side skirts * Driver’s seat: Super Air * Refrigerator and drawer * Preparation for air pressure device * Luxury LED interior lighting * Automatic cab climate control * Accessory power supply: Standard + 2x 40 A * FMS connector, extended and prepared * Digital tachograph, VDO 1C * DAF Infotainment Luxury Plus, luxury speakers * Predictive cruise control * Turn assist * Axle load monitoring * Mechanical differential lock * 2-cylinder compressor without clutch * Wheelbase 4.00 m/rear overhang 0.99 m * Electrical connection for trailer, 24 V/15-pin * Alternator 130 A, batteries 2 x 210 Ah AGM ---- Subject to prior sale and errors excepted. The vehicle description serves only for general identification and does not constitute a warranty in the legal sense. The exact scope of equipment can be obtained from our sales staff. Please contact us.

Condition: used, Year of construction: 2008, Technical data: Printing Section - 5 × UV Flexo Printing Units - 5 × UV Dryers - Web Inspection: BST PowerScope 300 – Web Inspection System Gtedpfxjxlrd Ne Admet Unwinder - Max roll diameter: 1250 mm - Heavy-duty construction with pneumatic shaft and web tension control - Integrated splice table and web guiding system Rewinder - Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module - Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) - Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section - 24” - Supports reprocessing or secondary processing of pre-printed materials Additional Modules - Ben Bunch 500 - Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) - Cross Cutting Cylinder (inline sheeting or perforation — precise longitudinal or transverse cutting) - Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Year of construction: 2021, condition: new, −−−− Panel Data −−−− Gedpfx Aei Dylfodmett − Type of panels: Particle board, MDF − Top panel face: raw, uncoated − Bottom panel face: raw, uncoated − Panel geometry: plane−parallel / not warped or bent − Panel density particle board: 550 kg/m3 − Panel density MDF: 650 kg/m3 − Panel length: 2500 − 2800 mm − Panel width: 1100 − 1250 mm − Panel thickness: 15 − 55 mm −−−− Multirip Circular Saw −−−− − Type of feeding system: automatic, locally provided − Application: Multi−ripping using a fixed saw set−up including edge−hogging on both sides − Edge hogging on the left: approx. 3.0 − 4.0 mm − Edge hogging on the right: approx. 3.0 − 4.0 mm − Minimum strip width: 32 mm − Maximum strip width: 45 mm − Tolerance on ripping width: +/− 0.2 mm − Feed speed: approx. 15 − 50 m/min. − Driving power top saw shaft: 55 kW − Driving power bottom saw shaft: 90 kW −−−− General −−−− − Working height: 900 mm − Operating voltage: 400 V/50 Hz, 3 phase (C1−C2−C3−N−PE // TN−C−S) − Number of dust extraction outlets: 4 − Diameter of dust extraction outlets: 250 mm − Air speed: 30 m/sec. − Dust extraction capacity: approx. 21200 m3 per hour MULTIRIP CIRCULAR SAW K34G−UU/1500 Right−hand design − Basic machine designed to accommodate two bottom saw shafts with hydraulic vertical adjustment, arranged one after the other, for the fixed set−up of circular saw blades or milling cutters − Hydraulic height adjustment of top rollers − Mechanical setting of top roller pressure − Continuous insert tables made of laminated wood placed above the saw shafts − Saw shaft loading carriage − Main dust extraction device at the bottom with outlets on the infeed and outfeed side − Noise and dust enclosure with viewing window − Door with safety interlock incorporated in the tilting machine hood on the driving side, for changing the saw shaft with the machine running − 9 bottom knurled steel feed rollers (7 powered) − 13 top polyurethane−ring covered feed rollers (all powered) − Max. saw blade diameter: 270 mm − Cardan feed drive system for top and bottom feed rollers (and brush rollers, if included), consisting of gearbox with ball bearing spur gears, axletrees serving as drive shafts in the area of the rollers to be driven, power transmission to the rollers via cardan joints − Built−in table with bevelled front edge, 250 mm − Speed of saw shafts 4500 rpm − Feed speed infinitely variable from 5 − 50 m/min. by frequency−controlled gear motor 2.2 kW, with normal accessories, without tools − In case of manual removal of the workpieces directly after the machine, the maximum feed speed must be limited to 35 m/min. according to the European regulations. CONTROL SYSTEM M34G MULTIRIP SAW CONTROL SYSTEM − Siemens SIMATIC HMI touch screen − 7" colour display − Siemens S7xx control − control equipped with remote maintenance and thus easy to service − controlled top roller height − controlled saw shaft height − product−specific programming possible (feed speed, material thickness, saw shaft height, ...) − interfaces to the locally provided master computer on inquiry − intuitive control due to the clearly arranged design − signal exchange with the workpiece feeding system − signal exchange with the workpiece removal system − "Industry 4.0 ready"

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG94US-13608, total width: 6,200 mm, total length: 10,500 mm, overall weight: 6,000 kg, input current: 34 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 8 bar, pressure: 8 bar, Table for laminated glass, max 8+8 and 4600mm including loading table 100BLM-J Gsdpfoxq D Uwox Admott Total weight approx. 6000Kg.

Condition: new, IPETRONIK interior simulation box Here we offer you an IPETRONIK indoor simulation box. Technical data and description of the equipment: IPETRONIK interior simulation box ( new and unused ). The interior simulation box is intended to simulate the passenger compartment for tests in recirculation mode. It has a variable interior space from 1,8 to 4m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is fed into the interior in a controlled manner. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulation chamber is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The installation is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the isolation chamber: Dimensions: Outside: width 1.860 mm depth 2.360 mm height 1.360 mm Inside: Width 1.700 mm Depth 2.200 mm Height 1.200 mm Insulation: 80 mm polyurethane rigid foam, foamed CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102. Technical data and description of the system: Connection: Tongue and groove system with foamed-in eccentric closing hooks. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320 Bottom finish: 2.0 mm stainless steel sheet 1.4301, SM rhombus, anti-slip, bottom beveled 90 ° all around (approx. 15 mm), bottom plate flush with wall plate, Pressure distribution plate made of laminated wood, 1,500 N/rubber wheel loadable (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded-in stainless steel pipe as floor drain, led out through the floor to the bottom Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.l., DIN left, heated door frame (230 V), heating bands silicone-free, 4-sided sealing profile made of EPDM, pess lever lock, lockable, emergency release, heated viewing window, 500 x 500 mm, triple glazed, surface heating (230 V), frame heating (230 V), heating controlled on site, silicone-free lipping Movable wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective foil, closed on both sides with sheet metal (The rear wall is manually infinitely adjustable for volume change). Recirculation system: For temperature control, a heat exchanger (Systemair) is mounted in the recirculation section for indirect temperature control. The air is conveyed by a radial tube fan (Cosmo), heating is provided by an electric heater integrated in the brine circuit, electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and 3-way valve (Belimo). Installed electrical heating capacity 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Feeding from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Gsdpfx Aolypy Eodmett Back-up fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC - System: S7 300 Type: IPETRONIK indoor simulation box Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), LAMINATING LINE, also for panels with ‘J’, ‘U’, ‘L’ profile and 45° angles. Minimum/maximum panel dimensions: mm 260-1300 (width) x mm 1850-4250 (length) Coating: decorative paper > 40 g/m2 - 120 g/m2 or PP, PET, PVC PUR glue (with NORDSON premelter) Consisting of: 01) "ESSEDUE" double station bridge Loader 02)"‘BUFTERING" caibrating-sanding machine Mod. SWT 955 03) Motorised roller conveyor ‘HOMAG’ Mod. TVL 100 04) Cleaning-sweeping machine ‘WANDRES’. 05) Gluing system with 2 pre-melters ‘NORDSON’ for PU glue 06) Machine ‘HOMAG’ Mod. KFK 200 with: - Double glue spreader - Coil unwinder - Calender (rollers press) - Side folding and pressing zone for excess material - Panel side trimming zone Gsdpfx Adowd Tcaomstt 07) Cross Cut machine "HOMAG" 08) "ESSEDUE" double station bridge Unloader

Condition: new, power: 355 kW (482.67 HP), fuel type: diesel, overall weight: 26,000 kg, gearing type: automatic, emission class: euro6, Equipment: soot filter, Vehicle number: 550042 Accident-free, full service history, non-smoker ---- DRIVER ASSISTANCE SYSTEMS * -Lane change warning system INTERIOR Gtodpsxl Nurefx Admot * -Left-hand drive * -Electric windows * -Black seat belts WHEELS * -Tire pressure monitoring system Further features ----- Color/Paintwork ----- -Cab color: E1980WHTE * -Lower cab step color: Stone Grey * -Mirror cover color: Black * -Roof spoiler color: Crystal White * -Chassis color: Grey * -Headlight surround color: Crystal White * -Bumper color: Crystal White ----- WHEELS/TIRES ----- -Front axle(s): Tire size 315/70R22.5, wheel size 22.5 x 9.00 * -Driven rear axle(s): Tire size 315/70R22.5, wheel size 22.5 x 9.00 * -Trailing axle: Tire size 315/70R22.5, wheel size 22.5 x 9.00 * -Supplier: Continental * -Steel disc wheels, silver grey * -Wheel trim rings without centre part, silver grey (RAL 9006) * -Front axle: Tire size 315/70R22.5, Continental model CEPS5, Load Index 158/150, Speed Index L, application: steer - long distance. Tire label: rolling resistance A - wet grip B - rolling noise 71 dB(A), category A - 3PMSF - M+S. * -Driven rear axle: Tire size 315/70R22.5, Continental model CEPD5, Load Index 154/150, Speed Index L, application: drive - long distance. Tire label: rolling resistance A - wet grip C - rolling noise 73 dB(A), category A - 3PMSF - M+S. * -Trailing axle: Tire size 315/70R22.5, Continental model CEPS5, Load Index 158/150, Speed Index L, application: steer - long distance. Tire label: rolling resistance A - wet grip B - rolling noise 71 dB(A), category A - 3PMSF - M+S. * -Spare wheel not applicable ---- Equipment/Special Features ----- -Luxurious cab for the XG model series with unique aerodynamics for fuel-efficient driving and low CO2 emissions. The huge, deep windscreen, which is curved at the sides along with the large side windows, offers the driver unrivalled direct vision to improve road safety. The cab interior offers excellent comfort for driving, living, and sleeping, with unparalleled spaciousness and practical design. Cab length: 2690 mm, cab width: 2500 mm. Number of cab entry steps: 3 * -To optimise airflow under the vehicle, an aerodynamic underbody plate is installed, improving fuel efficiency * -Maintenance-free mechanical 4-point cab suspension with integrated shock absorbers * -Fixed lowest cab entry step with non-slip coating * -LED headlights and bumper-mounted fog lights * -LED headlights with dual reflectors and impact-resistant Lexan lens glass * -Headlight beam for right-hand traffic * -LED daytime running lights are integrated into the headlamp assemblies. They are ON when the engine is running. * -LED skylights: two stylish light units each with a large glass lens perfectly flush with the cab roof front section. * -Dashboard switch and wiring incl. connectors A229 and A230 for easy installation of 2 LED work lights on cab rear wall * -Black door handle and handle surround. The slim cab side panel is colour-coded with the cab * -Windscreen made from double-layered laminated glass with sun protection film * -Double-layered safety glass * -Main mi

Condition: used, Year of construction: 2007, General Information • Machine type: Modular flexographic printing and converting press • Maximum printing width: 510 mm Printing Units Number of printing units: 3 Drive system: Dual drive per printing unit Printing technology: Flexographic Plate cylinder pitch: 1/8" Plate Cylinders (1/8") • 3 × Z88 • 3 × Z92 • 3 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 3 × Z140 Gtjdpfx Asx Ngfledmet Die-Cutting Units Number of die-cutting stations: 3 Counter-pressure cylinders: 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) Magnetic Cylinders (1/8") • 2 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 4 × Z140 • 3 × Z176 • 3 × Z184 • 2 × Z192 • 1 × Z222 Anilox Rollers Total anilox rollers: 13 Volumes (cm³/m²): 4.1 / 5.04 / 6 / 6 / 6.3 / 6.09 / 8 / 8.25 / 9.58 / 13 / 13.51 / 16.57 / 30 • 2 new anilox rollers included Coating & Special Units • Sleeve holders for varnishing: - 3 × sleeve holders Z88 - Including mounting station • Screen printing unit • Laminating station Drying Systems UV systems: 3 × UV units Uviterno, 240 W/cm NIR drying: 2 × NIR modules for water-based systems (Lambda Technology) Web Handling & Rewinding Grid winders: 2 × rail-mounted grid winders (up/down) Rewinder: Double-spindle rewinder for roll-to-roll operation Delivery: Conveyor belt for single labels Web cleaning system Complete set of non-stick rollers Corona & Web Guiding Corona treater: 2 kW (SIT) Web guiding system: • Erhardt+Leimer (E+L) • 2 × ultrasonic sensors • 1 × line sensor Inspection & Register Control Video inspection system: E+L Elscan Register control: • Sensotec • Register control for 5 stations (3 printing + 2 die-cutting) Inserter control for pre-printed rolls

Condition: good (used), Morgana Auto Creaser PRO 50 Automatic Creaser The machine is fully operational and ready to use. It is the most efficient creasing system on the market, with a robust construction. Made in England. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. Instruction manual included. Manufacturer’s description: Gtjdpfsx N I Izex Admot The MORGANA AUTOCREASER 50 PRO is one of the world’s most popular automatic creasers, manufactured by the British company Morgana Systems Ltd. The machine allows for strip creasing, line perforation, micro-perforation, and fragmentary perforation. The 7″ color Smart Screen programmer allows for easy machine programming. Working width up to 500 mm Productivity up to 8,500 sheets/h (A4), 11,000 sheets/h (A5) Paper feeding via a vacuum cylinder Programmable up to 16 creases in a single pass, unlimited number of programs Creasing paper weights from 0.11-0.4 mm (approx. 80-400 gsm) Option to install additional perforating discs – 20, 28, 56, or 90 notches Technical parameters: Maximum format (width/length): 500 x 700 mm Minimum format: 140 x 210 mm Maximum grammage: 0.4 mm (approx. 400 gsm) including laminated material Minimum grammage: 0.11 mm Maximum number of creases in one pass: 16 Number of programs: alphanumeric, unlimited Productivity: 8,500 sheets/h (A4-1 creasing), 11,000 sheets/h (A5-1 creasing) Perforating disc: 1 pc. standard Min. creasing distance from the front edge: 2.5 mm Min. creasing distance from the rear edge: 35 mm Minimum distance between creases: 1 mm Machine dimensions (L x W x H): 1,500 x 682 x 1,224 mm Net weight: 156 kg Power supply: 230V, 50 Hz

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 Gjdpsnzhxqsfx Admjtt 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor