Used Kaltenbach Kks 400 for sale (123)

Condition: used, Year of construction: 1999, machine/vehicle number: 119305, functionality: fully functional, cutting height (max.): 300 mm, cutting width (max.): 360 mm, table height: 300 mm, Equipped with: - Mitre saws - Semi-automatic - Roller conveyors approx. 12 metres - Operating manual Subject to prior sale and errors excepted. Guodpfxey Enuyo Am Tsb

Condition: used, machine/vehicle number: 8354, disk of circular saw-Ø: 350 mm cutting area at 90° round: 90 mm cutting area at 90° square: 160 x 70 mm cutting area in mitre at 45° square: 120 x 60 / 60 x 80 mm cutting speed: 30 m/min engine: 1,1 kW space needed: 1000 x 1250 x 1380 mm Gsdpfjby Hikox Am Tjub

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Year of manufacture: approx. 1976 Equipment: - Standard accessories - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system Gedpfx Amewtdi As Teub - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) - Outfeed roller conveyor 500 mm - Documentation Condition: good, workshop tested

Year of construction: 1971, condition: used, machine/vehicle number: 23964, disk of circular saw-Ø: 370 mm cutting area at 90°: 115 mm cutting area at 45°: 115 mm engine: 380 V, 4/5 kW space needed: 1000 x 1200/2200 x 1500 mm weight: ca. 900 kg Gjdpfx Amscu Dvus Tsub

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm DRILLING UNIT Vertical from above Guedpfjy At Iyjx Am Tob Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Condition: good (used), Year of construction: 2000, Sawcapacity at 90 degree: Round: Ø303 mm Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm Gujdsw Rz Shspfx Am Tjb Square WxH: 175 x 300 mm

Condition: used, Column-guided bandsaw semi-automatic METORA - KALTENBACH Type HMB 380 DS Only for 90° cuts (Made in Austria) Machine No. 4580028 Year of manufacture: approx. 1993 Gujdpedzqtgefx Am Teb Cutting capacity round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw band speed: 25–108 m/min, continuously variable Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw in double-column design - Hydraulic saw bow descent with stepless adjustable cutting pressure - Stepless adjustable descent speed - Hydraulic vice clamping with hydraulic bundle clamping from above - Hydraulic unit integrated in machine base - Material feed roller on infeed side with geared motor (not mounted on machine frame) - Coolant system with coolant pump for water emulsion - Minimum-quantity lubrication system for the saw blade - Electric heating cartridge for cooling water and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display, and hydraulic stop carriage clamping Stop length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable without roller conveyor Machine footprint (L x W x H): 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of stop system: approx. 800 kg In good condition

Condition: ready for operation (used), Year of construction: 2004, total width: 1,450 mm, total height: 1,900 mm, overall weight: 1,500 kg, product length (max.): 2,700 mm, Circular Metal Saw manufactured in 2004. This KALTENBACH SKL450NA features a saw blade diameter of 450 mm and a cutting capacity of 150 mm for round materials. With a weight of approximately 1.5 tons, it includes a loading magazine for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH SKL450NA machine we have for sale. Contact us for further details. • Total installation length (foundation plan): 3226 mm • Saw blade diameter: 450 mm • Saw blade type: HM / HSS (DIN 8576) • Blade bore: 50 mm • Number of fixing screws: 4 • Bolt circle: 80 mm Gusdpfxeykqrwe Am Tsb • Fixing screw diameter: M12 • Cutting capacity (round): 150 mm • Cutting capacity (rectangular): 140 × 160 mm • Cutting capacity (square): 140 × 140 mm • Saw blade feed speed: 0–3500 mm/min • Rapid return: 4500 mm/min • Cutting speed (at 400 mm blade): 1950 / 3900 m/min • Feed speed (material feed): 10 m/min (optional: 10 / 20 m/min) • Adjustable cut lengths: 10–1000 / 2000 mm • Miter adjustment: Stepless ±90° (manual) • Drive power: 3.7 / 4.7 kW (optional: 4.7 / 6.3 kW) • Compressed air connection: 6–8 bar • Control system: Kaltenbach PLC • Lubrication: Micro spray system Additional equipment • Loading magazine: T3 / L 45 E • Loading length: 6 m

Condition: used, Year of construction: 1992, saw blade diameter 450 mm Saw blade 50 mm capacity 90 degrees: round 150 mm capacity 90 degrees: flat 290x30 mm capacity 90 degrees: square 135x135 mm 0 - 1000 mm/min rapid return speed 1650 mm/min Gjdpfxeyv N Naj Am Tjub 0 - 30 ° dimensions of the machine ca. 1500x1200x1770 mm weight of the machine ca. 750 kg

Condition: used, Year of construction: 2003, cutting diameter 500 mm saw band length 6990x41x1,3 mm cutting width 860x500 mm cutting speed 15-90 m/min Feed 400 mm/min Rapid movement 2500 mm/min main drive motor 5,5 kW cutting length min. 8 mm total power requirement 8,5 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 3,3x1,2x2,42 m Single lift 3000 mm Multiple lifts possible Optional: Infeed roller conveyor approx. 8 m Outfeed roller conveyor approx. 10 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Gsdpfx Aoyutwqom Tsub apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2002, 17 METRES INFEED. GRIPPER FED. 14 METRES OUTFEED. APS 1015 3 SPINDLE DRILLING MACHINE. KBS 1001 SAWING MACHINE. Gusdpfx Amjx N Ibzj Teb INFEED & OUTFEED CROSS TRANSFERS.

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 Gjdpfsvkphgsx Am Tjub TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: Gsdehzbipspfx Am Tsub 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking Gujdpfxeyak Ano Am Tjb - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: used, Year of construction: 1962, machine/vehicle number: 7188, saw blade diameter: 750 mm, We are offering this used Kaltenbach HDM 750 cold saw, year of manufacture 1962. Type: HDM 750 Machine number: 7188 Hardness of hardened steel at low speed: 60-90 kg/mm² Guedpfx Asx T Abdom Tob Hardness of mild steel at high speed: ≤60 kg/mm² If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1999, cutting width 150 mm Guodpfx Asva Nqgjm Tob machine weight ab. 300 kg 27468

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: Gsdpod N Sm Dofx Am Tsub The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1996, Used Bandsaw Machine Kaltenbach, model HMB 360 Technical specifications: - Cutting diameter at 90° (round): 305 mm - Cutting range at 90° (square): 360 x 305 mm - Cutting range at 45° (round): 265 mm - Cutting range at 45° (flat): 265 x 305 mm - Cutting range at 60° (round): 175 mm - Cutting range at 60° (flat): 175 x 305 mm - Table height: 700 mm - Saw blade dimensions: 3830 x 27 x 0.9 mm - Band speed: 16 – 100 m/min - Machine dimensions (LxWxH): 2300 x 1450 x 1650 mm - Total power requirement: 380 V, 1.1 kW - Approx. weight: 780 kg - Year of manufacture: 1996 Terms of delivery: - Delivery time: ex stock, subject to prior sale - Delivery: ex works Baarle-Nassau - Payment: before collection - Prices: net, excluding VAT - Technical data: subject to change without notice Machinehandel De Leeuw BV cannot be held liable for any discrepancies between the specifications given in this offer and the actual machine. About Machinehandel De Leeuw BV: Machinehandel De Leeuw BV specializes in used machinery and accessories for the metalworking industry, as well as used paternoster systems from brands such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems like the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Visit address: Oordeelsestraat 7b, NL-5111 PA Postal address: P.O. Box 294, NL-5110 AG Baarle-Nassau, Netherlands Phone: Gsdpfxsgbd Ego Am Toub Mobile Antoine: VAT No.: NL 801262458B01 Chamber of Commerce Tilburg 18034279

Condition: used, Cold circular saw for light metal Saw blade 350 mm ø Cold circular saw for steel, Spontan Saw blade 225 mm ø, pneumatic saw feed, length stop 1,500 mm Cold circular saw for steel, Spontan Gedpsyl Nt Njfx Am Toub Saw blade 225 mm ø, hydraulic feed 300 mm Control unit defective

Condition: excellent (used), Condition: very good, item appears almost unused Guodpfx Amjyuudle Tjb Roller width: 350 mm Height adjustable from 650 mm to 950 mm Price for 3 pieces: 375.-- net

Condition: good (used), Year of construction: 1992, cold circular saw, metal circular saw, miter saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw, metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 3900 mm -max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW Gusdpfx Asr R Abpjm Tjb -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg

Year of construction: 1983, condition: used, Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW -with: coolant device -Dimensions: 990/1140/H1535 mm -Weight: 596 kg Gjdpfx Amod Ixn Ro Teub

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner Gusdpsh U U S Rsfx Am Tob -Manufacturer: Kaltenbach, Double miter saw type DKL 500 -Cutting length: 245 to 4180 mm -Saw units: swivels 45° -Saw blade: Ø 490 mm -Accessories: incl. additional saw blades, see photos -Overall dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg

Year of construction: 2009, condition: used, machine/vehicle number: 0301-230036, Kaltenbach drill saw system as a combination for use in light to heavy steel construction. With this Kaltenbach system, steel profiles can be drilled, center-punched and sawn to length in a single operation. Rolled profiles such as double T-steel, T-steel, U-steel, angle steel, hollow profiles and flat steel are processed here. The Kaltenbach drilling unit has an automatic tool changing device on three drilling spindles for five tool sizes each. The tools are positioned with high precision using ball screws and servomotors. The entire system is equipped with a length measuring device. Gedpfx Aerr Sq Nem Teub Technical information KDXS 1215 drilling machine: - Working area min. 80 x 65 x 10 mm - Working area max. 1200 x 450 mm - 3 drilling units (vertical Y-axis, horizontal Z- and W-axis) each 11.0 kW frequency-controlled: 33.0 kW - Automatic tool changer (3x5) - Frequency-controlled drive power 78 kW - Working height 640 mm - Machine dimensions 6100 x 1300 x 3730 mm (LxWxH) - CNC control with Profiline 3 software Kaltenbach HDM 1432 High-performance circular saw as vertical saw with swivel bearing for high sawing performance of medium and heavy steel profiles, working area at 90° saw cut: 1200 x 450 mm, mitre adjustment for mitre cuts of -45°/90°/+35°, this circular saw system is equipped with a segment saw blade diameter 1430 mm. High cutting performance thanks to powerful drive NC-controlled cutting angle adjustment Feed via ball screw for ideal cutting results and short idle times

Year of construction: 1997, condition: good (used), material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm Gusdpfx Amsha Hdhe Teb with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg