Used Inverter Ac Drive for sale (140,281)

Condition: used, mileage: 173,364 km, Year of construction: 2015, operating hours: 13,338 h, Drivetrain Drive: Wheel Weights Empty weight: 43.360 kg Functional Lifting capacity: 60.000 kg Identification Serial number: 605027 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Michellin Carrier engine: - Bjdpfxjw D N N Nj Adxjlp Upper engine: - Counterweight: 13600 Transport dimensions (LxWxH): 10.9x2.55x3.62 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Bledpfxsvg Rh Ts Adxop Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Condition: ready for operation (used), Georgii Kobold KSV 6/20 E1-M3-K4/Z1/P2/G1 AC Servocontroller MidiDrive , serial no. according to photo ,used, small traces of use, 100% functional, scope of delivery according to photos Bodpfx Adsi D U Smoxolp

Year of construction: 2002, condition: used,

Year of construction: 1999, condition: used, 1 used main spindle drive and Mainspindle drive INDRAMAT RAC 3.5-150-460-L00-W1-220 Siegfried Volz machine tools Rueschebrinkstr. 151-153 Bljdsdd Imdjpfx Adxep D-44143 Dortmund - Wambel

Condition: new, Available for sale: ABB ACS800-01-0120-5 Frequency Converter, complete with module options D150, E210, K454, L503, and Q967. A high-performance wall-mounted unit for variable-speed motor control and heavy industrial applications. Technical Specifications: Model: ACS800-01-0120-5+D150+E210+K454+L503+Q967 Input Voltage (Uin): 380–500 V Frequency (f): 48–63 Hz Number of Phases: 3 Mounting Type: Wall-mounting Bedpswuchgefx Adxjlp Output Power (Heavy-Duty Use): 75 kW Output Power (Light-Overload Use): 90 kW Output Power (Normal Use): 90 kW Output Current (Heavy-Duty Use): 113 A Output Current (Light-Overload Use): 145 A Output Current (Normal Use): 157 A Condition: New Availability: 1 pc

Condition: new, ACS800-01-0005-5 / ACS800 01 0005 5 / ACS8000100055, ABB AG Frequency Converter - New Model: ACS800-01-0005-5 Bledpfx Adeq S Ug Eexep Condition: New

Condition: used, 6-axis robot servo controller, drive, motion control, servo pack, servo unit Servo unit for YASNAC XRC UP6 YASKAWA / MOTOMAN type CACR-UP6AAC O/N RA8616-0Y4A-46 S/N: D000Z2676590046 Version: 6-axis module for robot - Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6 - USB interface Bledpfxowywi Aj Adxsp - Power supply type JUSP-RCP01AAC Dimensions (W x H x D): 270 x 310 x 200 mm Weight: 8.5 kg Used, in very good condition

Condition: ready for operation (used), Georgii Kobold KSV 6/20 E1-M3-K4/Z1/P2/G1 AC Servocontroller MidiDrive , serial no. according to photo ,used, small traces of use, 100% functional, scope of delivery according to photos Bljdpfei D U Sqjx Adxjp

Condition: used, Year of construction: 2018, operating hours: 22,700 h, functionality: limited functionality, We are selling a 15 kW ABB M3BP 160MLB 2 electric motor and a Danfoss VLT® HVAC Drive controller, also rated at 15 kW, as well as the Rittal control cabinet from a former extraction system we owned. Both units were operating flawlessly until disassembly. This sale is without warranty and returns are not accepted. Inspection and shipping from the factory are possible. Bljdpfev U Ntkjx Adxop

Condition: new, Heller ACPU90-SE D 23 Digi Drive ACPU90-S J 22 Uni Pro < unused > 100% functional Blsdei Ea Emepfx Adxsp

Condition: new, Omron R88D-UP04H AC Servo Driver, Serial No. 406910-10-60 95.03, unused in original packaging, 100% functional Bodpfei Ecbzox Adxjlp

Condition: good (used), servo motor, DC motor, servo gear motor, servo actuator, drive actuator, servo drive -Manufacturer: HD Harmonic Drive, Hi-T Drive SERVO ACTUATOR -Type: RH-8-3006-T-SP Bledpfx Asvpffxsdxop -Shaft: Ø 18 x 20 mm -Dimensions: 200/60/H65 mm -Weight: 1.0 kg

Condition: used, functionality: fully functional, Ferwood Code: RU0008247 - Manufacturer Code: 31C014-503-4-00 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC - LOADING UNLOADING IMA - BARGSTEDT - MEINERT - If interested we offer an overhaul service, contact us. Bodpev Hgfhjfx Adxelp

Condition: used, functionality: fully functional, Ferwood Code: RU0008248 - Manufacturer Code: MC07B0040-5A3-4-00 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC - LOADING UNLOADING IMA - BARGSTEDT - MEINERT - If interested we offer an overhaul service, contact us. Bodpev Hgfuofx Adxelp

Condition: new, Year of construction: 2024, Classical extraction system with powerful motor, big metal waste bins and multiple filters for big filtration area which are closed inside the bin for protection. It also includes a big-particle separator to prevent damage to the whole system. TECHNICAL SPECS: - Motor power: 7.5 kW + electronic control (inverter) - Air flow: 6500 m3/h - Air speed: 32m/s - filter area: 21 m2 - waste bins volume: 450 liters - weight: 450 kg - inlet diameter: 300 mm - Dimensions: 2400 mm X 1160 mm X 2310 mm Bedpef D S T Isfx Adxjlp

Condition: used, mileage: 558,000 km, power: 368 kW (500.34 HP), first registration: 02/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2024, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGX 18.500 Ref. No.: 737466 Hydro Drive Tipping hydraulics Sun visor Long cab 1 bed Flat roof Automatic transmission Differential lock Retarder Air conditioning Trailing axle Rear air suspension Blsdpfx Adjxtcfmjxjp German vehicle 1 owner Original paint Tyres approx. 50% etc....

Condition: used, Year of construction: 2018, Used machine Year of manufacture 2018 Basic equipment Electric height and tilt adjustment 0-46° with automatic cutting height correction when tilting Control at eye level, pivoting Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Max. sawblade projection 150 mm Max. sawblade diameter 450 mm Bledpfoxppv Rsx Adxep Drive power 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height 91 cm Productivity package Motor 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life. Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a max. sawblade diameter of 550 mm and a max. sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the max. sawblade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). Two-sided tilting! RAPIDO Plus 3-Axis Scoring Unit With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED Lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. Sliding Table with a Carriage Length of 3000 mm Basic Equipment Sliding Table with a Carriage Length of 3000 mm The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in the respective hard-chrome-plated guide rods. This running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-cavity system. The table surface is precisely planed and anodized. A hard-chrome-plated round bar, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. DIGIT-L Angle Miter Stop, Cutting to Lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the swivel angle is continuously adjustable by 49° and is digitally displayed. The play-free and robust stop flaps can be easily moved and adjusted as individual flaps over the entire range up to a maximum of 3500 mm. For cutting to lengths up to approx. 1700 mm, the roller-supported, stable telescopic

Condition: used, mileage: 862,741 km, power: 397 kW (539.77 HP), first registration: 12/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2025, brakes: retarder, color: green, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, MAN TGX 18.540 - 4x4 H Hydro Drive - Manual transmission - Light bar - Refrigerator - Retarder - Dual-circuit hydraulics - Leaf/air suspension - 1 x sleeper berth - Rotating beacon - Heated seat - Front axle tires: 385/65 R22.5 - Rear axle tires: 315/80 R22.5 Bljdpfoxqla Usx Adxjp Subject to errors and prior sale. Internal vehicle number: 11445

Condition: used, Year of construction: 2012, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: RD 22, feed length Y-axis: 15,000 mm, workpiece weight (max.): 15,000 kg, cutting height (max.): 300 mm, power of the milling unit: 12,000 W, saw blade diameter: 800 mm, working width: 625 mm, Equipment: safety light barrier, HUNDEGGER ROBOT DRIVE Year 2012 Section 40x60 to 650x300 Infeed length 15 m, outfeed with door Regular maintenance Centralized lubrication Tool package Bjdsxt Ndcepfx Adxjlp Dismantling not included Loading assistance included

Condition: new, bending length: 1050sheet thickness: 1upper roll diameter: 56 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily Bodpfjd Ab Uxjx Adxslp - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover - Hardened rolls EURO 336,-- We have many references!

Condition: new, Year of construction: 2025, Equipment: ABS, JCB Backhoe Loader 4CX New Machine Special Edition 1 Million Backhoe Limited Edition Special decals - Year of manufacture: 2025, new machine - Engine: [81kW/109HP] Stage 5 - 40 km/h road-legal machine - Dual Drive / Dual Drive autoshift - Comfort cabin (ROPS/FOPS) with automatic climate control & carpeting - Air-suspended & heated seat - Tires: Michelin Power CL 440/80-28 - LSD axles - Powerslide - Heavy Lift - Boom cylinder with end-position damping - Hammer and double-acting hydraulics - Outriggers with rubber pads incl. auto-levelling - 6-in-1 bucket, 1.2 m³, 2,350 mm wide with foldable forks incl. hydraulic quick coupler - Standard digging bucket, 600 mm wide with teeth - 10x LED work lights - License plate mounting bracket - Protective cover for fuel tank Bjdpsxmmrkofx Adxolp - Counterweight with 255 kg - JCB hydraulic quick coupler Optional equipment: Many attachments available on request We are happy to provide you with a leasing or financing offer from Mercedes-Benz Bank upon request. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale!

Condition: used, current capacity . kVA throat . mm contact pressure capacity . kp dimensions ca. 650 x 800 x 2050 mm weight of the machine ca. 140 kg This spot welding machine with state-of-the-art Inverter 125L technology enables the welding of high-strength sheet metal and all other steel sheet parts. The multi-purpose machine with water cooling is ideal for all intensive work under heavy loads. Bedsxb Ef Sspfx Adxslp DESCRIPTION: - Welding machine for all spot welding and alignment work - Pneumatic clamping tongs with strong tension (strength at electrodes) 550 N at 7 bar with electrode arms of 100 mm - 2.5 m water-cooled cable for the clamp and 3 m air-cooled cable for the gun - Current compensation - Telescopic arm with equalizer - Pneumatic clamp with remote control - 78 welding programs

Condition: good (used), functionality: fully functional, mileage: 465,600 km, power: 294.2 kW (400.00 HP), first registration: 08/2011, fuel type: diesel, overall weight: 18,000 kg, tire size: 315/80R22,5, axle configuration: 4x4, next inspection (TÜV): 11/2025, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: ABS, additional headlights, air conditioning, airbag, all wheel drive, cruise control, differential lock, hydraulics, onboard computer, parking air conditioner, parking heater, soot filter, traction control, For sale: MAN TGS 18.400 4x4 in good condition Vehicle just arrived. Key number: 90 000 LOF Tractor Unit MAN TGS 18.400 4x4 Hydro (Like New) First registration: 08/2011 Mileage: 465,600 km Technical inspection (TÜV) valid until: 11/2025 Safety inspection (SP) valid until: 05/2026 Permissible total weight: up to 20,500 kg Tyre size: 315/80R22.5 (like new) All six tyres like new Clutch replaced (new) Both front axle hydraulic motors like new Stationary air conditioning 2-circuit tipper hydraulics Alloy wheels Roof bar with four auxiliary spotlights Registered as LOF tractor unit, speed limited to 60 km/h (conversion back to 90 km/h without LOF possible) Financing possible through our partner banks. Trade-ins accepted: trucks, trailers, semi-trailers, construction machinery or similar. Nationwide delivery available at additional cost. The vehicle may be stickered and/or lettered with advertisements. Our offer is generally without a new TÜV inspection. If a new inspection is desired, we will be happy to provide a quote. Bledowk Nvcjpfx Adxjp Sale to commercial customers is on an as-inspected basis, without any subsequent claims for defects, and excludes any warranty or guarantee, ex location Salzgitter. Our services for you: - Procuring short-term or export number plates - Nationwide delivery/transport - Export/customs clearance for vehicles outside the EU Our vehicle description is for general identification of the vehicle only and does not constitute a warranty in the legal sense of the term. The information provided does not claim to be complete. All specifications, descriptions, and images are subject to change and are not guaranteed features. The seller assumes no liability or guarantee for typographical or data transmission errors. Specifications may need to be checked separately. Subject to changes and prior sale.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only Blsdpfst Awm Dox Adxjp - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.