Used Internal Threading Machine for sale (71,681)

Condition: excellent (used), A well-maintained internal cylindrical grinding machine, manufactured by JUNG, type 221, with a surface grinding attachment. The largest bore that can be ground economically is 150 mm. Grinding length without surface grinding: 250 mm. Grinding length with surface grinding, depending on the chuck length: ≤ 250 mm. Largest swing diameter inside the guard: 350 mm. Height of the spindle center above the table: 245 mm. Workpiece spindle bore: 44 mm. Workpiece spindle hollow taper: metric 50. Workpiece spindle speeds: 58 - 85 - 120 - 170 - 246 - 348 rpm. Table speed in rapid traverse (infinitely adjustable): 10 m/min. Table speed during grinding (infinitely adjustable): 0 - 8 m/min. Power requirement: 11 kW. Njdpfx Aoy Svz Uekiswn Power requirement for the machine with surface grinding attachment: 12.5 kW. Net weight: approx. 3500 kg.

Condition: good (used), Year of construction: 1956, machine/vehicle number: 5866, POLYGRAPH thread sewing machine 39 3/4 /2, machine number 5866, working width 39 cm, year of manufacture 1956, in good condition, immediately available. If interested, we will also be happy to inform you about other machines in our inventory. Nodpfxoxbzgxj Akijwn You are welcome to inspect the machine at our premises by prior appointment.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, overall weight: 7,500 kg, grinding diameter: 300 mm, controller model: Siemens Sinumerik 840D Solutionline, No minimum price – guaranteed sale to the highest bidder! The control system was upgraded to a Siemens Sinumerik 840D Solutionline in 2014. The new control system was overhauled in 2016! TECHNICAL DETAILS Spindle speed range: 170–18,000 rpm Nsdszwmz Tepfx Akiewn Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above the workpiece table: 200 mm (300 mm) Center height above the grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table, Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed rate: 0–9.99 m/min Feed rate: 0–99.99 m/min Incremental feed value during reversal: 0–0.999 mm Grinding table, X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Rapid traverse: 5 m/min/rev Grinding feed rate: 0–5 m/min/rev Feed rate: 0–99.99 mm/min/rev Incremental feed value during reversal: 0–0.999 mm/rev Workpiece spindle head, B-axis Swivel range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Resolution: 0.001 mm/rev Traverse speed: 5 m/min MACHINE DETAILS Control system: Siemens Sinumerik 840D Solutionline Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m

Condition: excellent (used), max. workpiece diameter 400 mm threading length 1000 mm max. module 4 (8) min. module 1 Nwsdpfx Ajzmapiekien clamping length max. 850 mm weight of the machine ca. 3,1 t dimensions of the machine ca. 3,1 x 1,1 x 1,6 m

Year of construction: 2014, condition: good (used), machine/vehicle number: 2014-1313, Offer 22651 Technical specifications: - Mobile version with motorized forward/reverse movement + steering Nodpfx Akoi Apb Njiewn - Motorized oscillating stroke, forward/reverse, with speed control - Oscillating stroke, longitudinal, forward and backward - Motorized contact pressure - oscillating pressure adjustment - Grinding belt dimensions approx. 2000 x 50 mm - Contact disc B 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Condition: used, Thead Roller TLM RP8 TLM TORTONA Nwedpfx Asx Aqprjkisn Year: 1995 Diameter range: 3-8 mm Shaft length under head: 90 mm Max. thread length: 52 mm Dies size:130/115x54

Condition: excellent (used), Year of construction: 1994, internal diameter 300 mm Nodpjyrtwrjfx Akiown grinding depth 450 mm swing diameter 660 mm

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 3520.17.137, Tripet TST201CNC No. 3520.17.137, Year of Manufacture: 1987 Power: 76 kW Njdewffmmjpfx Akiewn

Condition: new, Hydraulic thread cutting machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread: M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic thread cutting machine Incl. machine base with clamping plate Nwodpokhmgiofx Akien Mobile Hydraulic pressure gauge Stepless speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts: M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: used, shaft length under head: 80 mm, thread length: 58 mm, GW 63 / GW 63SX flat-die thread rolling machines, various models, good condition, top-of-the-line electrical system EW Menn including vibratory feeder, Skako, and slide conveyor Nwsdpfowkqvqsx Akien

Year of construction: 1972, condition: ready for operation (used), A Voumard internal cylindrical grinding machine completely overhauled in 2020 is available. Grinding diameter range: 5mm-200mm, grinding depth: 250mm, speed: 1000rpm, speed control: continuously variable. An on-site inspection is possible. Nwedpfoy E S Hmex Akijn

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Nede Aayk Ropfx Akiswn Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Condition: good (used), Made in Germany - min. bore: 6 mm - max. bore: 50 mm - max. grinding length: 80 mm - max. clamping diameter: 235 mm - distance spindle / table center: 145 mm - spindle speed: 640 und 1000 rpm - swivel angle from spindle to one side: 10° - max. table speed, hydraulic adjustable:: 12 m/min. Nwododa A Eispfx Akisn - max. distance spindle / grinding device: 550 mm - power consumption: ca. 8 kW - weight: 2000 kg

Year of construction: 1995, condition: good (used), 2 Die Thread Rolling machine SENY, Type D-44 EH, Versatile for all types of work, manual and automatic cycles, easily adapted to automating loading,range of cycle times and roll speeds.operating pressure 100Kn, workpiwcw min 3mm max 40mm,lead 3,5 max, pitch of serrations 1,75mm max, roll length 80mm, diameter roll min 80mm max 120mm,roll spindle speeds 47-94, roll spindle diameter 40mm,distance between rolling spindles 80mm minim 165mm max, working stroke 7, feed 0,5mm/s minim 6mm/s maxim, rolling time,variable 0,1-100 seg, swivelling roll spindles +-5º,main motor 3Kw, connected electrical load 4,68kw, tank capacity 150L,aprox weigth 1100kg Nwsdepwbvkopfx Akien

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible Nwsdpfx Akswk Nxqoijn - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: good (used), Year of construction: 1974, internal diameter 25 - 300 mm grinding depth 250 mm swing diameter 50 mm centre height 300 mm internal grinding diameter 25 - 300 mm spindle bore 70 mm spindle speeds 45 - 450 mm inclination 30 ° table movement in milling step automatic 600 mm/min table speed - backwards 0 - 10 m/min spindle turning speed range 3000 - 18000 U/min Njdpfjzbc I Ssx Akiewn spindle diameter 120 mm total power requirement 12 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 4,0 x 1,9 x 1,8 m

Condition: used, Year of construction: 2010, honing diameter 54 mm stroke 99999 mm Nwjdsvk Nkuspfx Akion centre height 9999 mm Control FANUC CNC Ball and spherical honing machine

Condition: used, Grinding diameter 5-200 mm Max.grinding depth 250 mm Center height 180 mm Max.workpiece length 500 mm Spindle bore diam. 50 mm Workpiece spindle speed 125-1000 rpm Workpiece spindle tilt 90° Table travel 3/600 mm Table speed 0-10 m/min Spindle speed 3600-40000 rpm Power 8-10 CV Nodpfx Akoza Hk Uoiewn Dimensions 3200x1630 mm Weight 2700 Kg

Year of construction: 2009, condition: ready for operation (used), Offered is a precision internal grinding machine. Grinding range: max. Ø 357mm x 315mm, control system: CNC control system. Equipped with full enclosure, workpiece spindle head, grinding spindle carrier, separate control cabinet, extraction pipe routing. Weight: approx. 5200kg, overall dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm. Inspection possible by arrangement. Nsdpey Ulm Eofx Akijwn

Condition: used, Year of construction: 1997, Technical details: pressure: 10 t workpiece diameter - max.: 50 mm threading length: 100 mm max. rollable pitch: 3 mm rolling power: 100 kN workpiece diameter min/max: 117/175 mm revolution per minute: 0 - 150 U/min Weight approx.: 2550 t dimensions of machine: 1,25 x 1,38 x 2,15 m Njdpjx Iu Ifofx Akijwn *

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg Njdpfx Ast Dwb Djkiewn clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: new, Bernardo TM 16 BLO/ R 1100 Electric thread cutting machine Technical specifications Tapped holes* M3 - M16 Speed max. 120 - 325 rpm Adjustable angle 0° - 90 Max. Working radius R 1100 mm Quick change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power 600 W Voltage 230 V weight approx. 26 kg * Material strength 400 N / mm2 Scope of delivery Operation via touch screen Digital drilling depth display Micro spray system Blow-out device Quick change chuck Quick change chuck according to DIN Electric motor Nwjdpfxepag Nps Akisn 90° angle adjustment Mounting flange Features Standard with micro-spray system for constant cooling and minimal cooling lubricant consumption Including blow-out device for removal of chips, thus optimal view of the drill hole Including quick-change chuck for the use of taps for through and blind holes Swiveling motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed right angle (90°) High productivity, significant time savings compared to manual thread cutting Quick-change chuck with integrated slip clutch prevents tap breakage Including swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base 900 x 600 mm with 2 drawers for TM series 830,00

Condition: used, Year of construction: 2008, Control SINUMERIK 840 D rolling power 800 kn diameter max. Werkstück: 250 mm work piece width 80 mm spindle diameter 110 mm 100-700 1/min power capacity 110 kW length 2600 mm Nodjztfwlopfx Akiswn width 2600 mm height 2600 mm weight 12,5 t Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm

Condition: excellent (used), Year of construction: 1985, internal diameter 300 mm Njdpfx Aoyrtvzekiown grinding depth 450 mm swing diameter 660 mm

Condition: good (used), Max. threading performance: metric thread, brass M33, cast iron M16, steel M14, including accessories. Njdpfx Aoibmn Eokijwn