Used Inkjet Printer for sale (2,845)

Condition: excellent (used), Year of construction: 2019, operating hours: 1,500 h, 3D Printer Manufacturer: Stratasys Model: F370 Year of manufacture: 2019 Build volume (XYZ): 355 x 254 x 355 mm Layer thickness options: 0.330 mm, 0.254 mm, 0.178 mm, 0.127 mm Supported materials: ABS-M30, ASA, FDM TPU 92A, ABS-ESD7, PC-ABS, Diran 410MF07, ABS-CF10, FDM Nylon-CF10 Connectivity: Wired (Ethernet) and wireless (Wi-Fi) options Materials: Spools of 1470 cc: Hfsdsxk Uvlepfx Aacon ABS white: 1 x 100% / 1 x 80% ASA grey: 1 x 10% PC-ABS black: 1 x 100%, 1 x 30% Spools of 980 cc: ABS blue: 1 x 10% TPU 92A: 1 x 100% QSR Support: 2 x 100%, 1 x 30% Accessories: - Build plates: 14 x new, 3 x used - Clean Station UW40 with large and small basket - Carrier 40 (cart for Cleaning Station) - Print head (TPU) new - Z-table Stratasys

Condition: used, New: No Empty weight: 10 kg Part suitable for: trucks Moba Hfjdpfxjxhrzae Aacen Occ weegcomputer Moba + printer Star D Article nr.: V150999050-veiling Used weighing computer Moba + printer

Condition: good (used), This listing is for a DOMINO BITJET +V4.50 .It is sold as seen. Item was fully operational before factory closure and has been maintained throughout its life. Hedpfx Aaegvak Decofn Prints from 60dpi to 240 dpi Linear Speeds up to 800m per minute . Comes with the GT editor Rack Dimensions: 860mm (D) x 1300mm (H) x 450mm (W) 33.8” (D) x 51.2” (H) x 17.7” (W) • Stainless steel construction 120v or 230v, 50/60HZ, • Shaft encoder input, NPN O/C or line driver, 12v or 5v • TCP/IP – Domino Editor GT and third party controller range

Condition: good (used), Year of construction: 2024, No sale, but financing offer for customers with company headquarters in Germany. Hedpfx Aaew Hdvijcofn Technical data: • FLUSHING CARTRIDGE PRO L5100 SERIES • RDE BLUE ANGEL STICKER UZ219 100X30 • AVERY MPI3000 BUNDLE MEDIA FOR KOJIKI SERIES • Green Button Installation Available from: immediately Delivery terms: ex location – EXW Wiehl Payment terms: payment before collection Accessories without warranty. Applies: "Item purchased as seen." The prospective buyer must check the completeness of the item on site.

Condition: not inspected (used), functionality: limited functionality, machine/vehicle number: DMP 2831, Used FUJIFILM Dimatix DMP 2831 materials printer. Manufacturer: FUJIFILM Model: DMP 2831 Voltage: 200-240V~ (50/60Hz) Hfodpexgrpbofx Aacsn Includes cables and DimatixDropManager software

Condition: ready for operation (used), Year of construction: 2018, A digital UV flatbed printer Fuji is available. Rigid material: max. dimensions X/Y: 1250mm/2500mm, max. material thickness: 50.8mm, max. printing dimensions X/Y: 1260mm/2510mm, max. material density: 34kg/m². Roll material: max. printing width: 2190mm, roll width range: 900mm-2200mm, max. roll weight: 50kg. Ink type: KN series/KV series, channels: 5, colors: CMYK/white. Droplet size range: 6pl-42pl, min. print resolution: 1200dpi, print modes: 6, max. printing speed standard/roll: 22.8m²/18.9m²/h. Machine dimensions X/Y/Z: approx. 4100mm/2000mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. The machine is ready for shipment and cannot be demonstrated. Hodpfx Aoxnz U Njacjfn

Condition: excellent (used), 3D Metal Printer Manufacturer: CONCEPTLASER Model: M1-2010-01-01 Year of manufacture: 2010 Build volume: 250 x 250 x 275 mm Compressed air: 7 - 8 bar Hodpfoxk T Ndsx Aacjfn Inert gas: 5 bar Supply voltage: 3/N/PE AC400V +/-10% 50 Hz Materials: CL50WS: 50 kg and CL91REW: 40 kg Equipment: - 1 Rofin fiber laser StarFiber 200 with 200 W - 1 process chamber (can be inertized) - 1 loading station - Nitrogen generator incl. 1000-liter pressure vessel - Conceptlaser automatic sieving station (2 material sets) - Explosion-proof vacuum cleaner Manufacturer: Ruwac, Year: 2023 - Various accessories (filters, seals) - Machine operating hours: 16,620 h - Laser source operating hours: approx. 11,000 h

Condition: excellent (used), functionality: fully functional, ACCURIO PRESS C3070 Hfjdpoxf Nzfjfx Aacon very good condition, low meter count, see photos

Condition: excellent (used), Year of construction: 2018, AGFA INCA ONSET X3 3/4 automised, single robot and new version of laytable Outstanding conditions, printheads 100% perfect. Price includes installation and warranty The Inca Onset X3 is a high-speed, high-quality flatbed inkjet printer with a max print size of 3.22 x 1.6 meters (126.8 x 63 inches) and a substrate thickness of up to 48mm. It offers exceptional speeds, with the 'HS' model capable of over 1,450 m²/hr (15,600 ft²/hr), features a scalable architecture with 14 ink channels for CMYK and white/orange ink options, and is driven by Agfa's Asanti workflow software. The Onset X3 is designed for productivity and reliability, supporting 24/7 operation with options for automation, and is capable of a wide range of applications from POP displays to corrugated packaging. Key Specifications Maximum Print Size: 3.22 m x 1.6 m (126.8 in x 63 in) Maximum Substrate Thickness: 48 mm (1.89 in), or 18 mm with automatic handling Print Productivity: Up to 1450 m²/hr (15,600 ft²/hr) for the Onset X3 HS model Ink Channels: 14 ink channels (three sets of CMYK plus a choice of white or orange) Substrate Compatibility: Foam PVC, PVC sheets, foamboard, corrugated cardboard, display board/cardstock, compressed cardboard, polystyrene, paper, synthetic paper, banner material, corrugated polypropylene, and polycarbonate Features & Benefits High Productivity: The Onset X3 HS is one of the fastest flatbed printers, with high throughput for demanding production environments. Scalable Architecture: The Onset X series is a scalable platform, allowing businesses to upgrade their printer's capacity as their needs grow. High-Quality Output: Features include print heads across the full width of the bed, ensuring high-quality prints without banding. Automation Capabilities: Compatible with a range of robotic handling systems for three-quarter or dual-robot automation setups. Hjdpfxexbr E Se Aacjfn Versatile Applications: Capable of producing display graphics, window graphics, freestanding displays, and packaging. For further technical information please refer to enclosed brochure

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, For sale is a complete metal 3D printing system from Desktop Metal, suitable for additive manufacturing with metal powders using the binder jetting process. The system is ideal for prototyping, small-scale production, and research. Hjdpfx Aowgky Isacofn Included in the purchase price: 1x Printer (Desktop Metal, 12-liter volume) 1x Sintering furnace 1x Gas valve for the sintering furnace 1x Drying furnace 2x Depowdering stations 1x Powder mixer 2x Industrial vacuum cleaners 6x Powder drums Not included in the purchase price (can be purchased optionally): 1x Additional drying furnace 1x Depowdering station (in-house development) 250 kg metal powder 17-4PH 100 kg metal powder 316L Additional powder drums Protective equipment for 2 people Other accessories

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Hedpjux Sfzofx Aacsfn Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Hfjdpfx Aaovtftqocon Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: used, functionality: fully functional, Year of construction: 2019, We are offering here an industrial 3D printer, the Fortus 380MC from the renowned brand STRATASYS, for sale. The printer operates using FDM technology. The printer was manufactured in 2019 and is in good condition. It features a build envelope of 356 x 305 x 305 mm, comes with approximately 40 print plates, and includes various print nozzles as shown in the photos. - 0.127 mm T10 nozzles - 0.178 mm T12 nozzles - 0.254 mm T16 nozzles The printer is equipped with the following material licenses: - ABS-M30 - ABS-ESD7 - ABS-M30i - ASA - NYLON12 - PC-ABS - PC - PC-ISO - PC Support - PC-ABS - PC-ISO - SR100 - SR110 - SR30 - SR35 Hfsdpfxjxnm Dce Aacsn The printer can be viewed by appointment in 88483 Burgrieden.

Condition: ready for operation (used), functionality: fully functional, Roland SG-540 The Roland SG 540 is a printer/cutter plotter designed to deliver exceptional performance in the graphics production sector. With a print width of 54 inches (approx. 137 cm) and a media length of over 5 meters, it is perfectly suited to handling large materials and executing extensive projects. TR2 ink head upgrade carried out by Roland, certified for medical environments. - All functional printer heads remain powered at all times; Hedpfx Aajxfihrjcjfn - For shipping, the machine will be purged with cleaning cartridges and a set of new ink will be supplied for commissioning. Video available on request.

Condition: excellent (used), Year of construction: 2016, Inca Onset X2, 3/4 automized Color configuration: 8 channel printer with four colours (CMYK) 1/4 of the new price !!!!! Perfect printhead status allowing to print at maximum speed with outstanding quality, up to 140 beds per hour/700m² per hour. The machine is in excellent shape, serviced by manufacturer since day number one. Annual maintennace done in May 2025. Available: August 2025 Hfedpfoun Swbox Aacsn As the business expands, Onset X2 provides the capacity to extend the range of jobs companies can handle. The addition of a second set of CMYK delivers even higher productivity - up to 707m²/hr* (equivalent to 138 full-bed sheets/hr) - while an optional six channels can be populated with light cyan (Lc), light magenta (Lm), white (W) and orange (O) to add versatility and superb quality. A choice of uni-directional, bi-directional and super high-quality print modes can be selected depending on the specific job requirements. * Based on an approximate 6 second material handling time. Decomissioning, transport, installation, training and warranty are included (in Europe) For further technical details please refer to enclosed data sheet.

Condition: used, functionality: fully functional, In this offer you buy a used flatbed printer ‘Roland VersaUV LEF-12i’ Object of sale: 1 x Roland VersaUV LEF-12i with the following equipment: incl. trolley Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! Hsdpfxswcli Ao Aacefn A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Hfodpfx Ajk Abllsacsn Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Condition: good (used), 3D Systems Type: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-performance SLA Printer Machine has been regularly maintained Hfsdpoxam Ifjfx Aacjn Operating hours: 18,700 (as of 18.04.2023) Not operated after 18.04.2023 Note: Annual servicing carried out up to dismantling For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with the latest printhead technology and is suitable for high-precision components and industrial applications (e.g. automotive, aerospace, medical technology). Additional features: - Automatic material replenishment system and pre-assembled material supply module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Touchscreen operation on the device (Print3D Pro™) - Status/signal light module, central user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Technical Data: - Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) - Maximum build volume: approx. 650 × 750 × 550 mm - Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm - Weight: approx. 907 kg - Resolution: up to 0.00127 mm (laser spot size), 4000 DPI - Accuracy: ± 0.025–0.05 mm per inch - Materials: Wide range of Accura resins (tough, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phase: Single-phase - Fuse: 30 A - Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Year of construction: 2014, Offer for flexo press UTECO ONYX 808 gearless, 8 colors, year 2014 and 1280 mm width. Fully equipped. Hfsdpoxf T Hlofx Aacsn

Condition: excellent (used), Year of construction: 2021, KONICA MINOLTA C4070 11/03/2021 Color: 1,500,000 (scalable) Black: 300,000 PF707 RU SD506 FS RIP KM Hfjdpfxexdfgho Aacon

Condition: excellent (used), Year of construction: 2014, Vutek GS3250 LX Pro UV Led flatbed hybrid printer Print width 3.2 meters Configurated CMYK (8 colours possible) White disable but possible to install, 4 printheads included. Heavy duty unwinder input and output table Perfect printheads condition Installation in Europe possible Media/Handling Handles rigid and sheeted media up to 3.2 m wide and up to 5.08 cm thick Hsdpfx Ajw Uic Neacefn Multiroll capable Optional heavy-duty unwinder (HDU) Optional extension table with casters Optional small depth extension table Productivity Best Quality Mode (1000 dpi, 8 colour, heavy smoothing) 26 m²/hr POP Quality Mode (600 dpi/greyscale, 8 colour, light smoothing) 84 m²/hr Up to Speed (600 dpi/greyscale, Fast-4™, no smoothing) 223 m²/hr For further technical specifications please refer to enclosed brochure

Condition: refurbished (used), For Sale: Refurbished EOS M290 – Ready to Use This fully inspected and refurbished EOS M290 is in excellent condition! This setup is ready to use and ideal for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) • Material Type: Metal • Compatible Materials: On Request • Build Volume: 250 x 250 x 325 mm • Laser Type: Yb-fiber laser; 1 x 400 W Consumables Featured We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is designed to perform at or above OEM powder levels, while significantly reducing costs. By switching to our materials, you will reduce your production costs without compromising on quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options to fit your needs, for long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality remanufactured EOS SLS and DMLS machines with comprehensive support services. We are the only provider to offer end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. What we offer: Hedpfx Aewmq Dyeacsfn • Expert maintenance: Installation, maintenance, repairs and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. • Unmatched support: From transportation to maintenance plans, we have it all covered. Trust IM3D for top performance, superior materials and the expertise to keep your SLS and DMLS production running smoothly. Please feel free to contact us for more information or questions!

Condition: excellent (used), operating hours: 4,810 h, EOS EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) System including accessories: 3 x build boxes, docking station, multibox, water/water chiller. The system has been regularly serviced (last service performed in 07/2025). EOS unit Regularly maintained Service reports available Laser measurement protocols documented System has only processed PA11 (EOS PA1101) Operating hours: 4,810.9 h Hfjdpfxjw U R Dbo Aacon For sale is an EOS P 396 with PSW 3.8—a high-precision industrial system designed for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for series and prototype manufacturing. Base machine with control cabinet & control terminal Exchange frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20 °C water / 18 °C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. fill amount 520 g) Multibox is a typical EOS accessory for powder handling—for transport and interim storage of materials. Technical specifications: Laser and optics: Laser type: CO₂ laser Nominal power: 70 W Wavelength: 10.55 – 10.63 μm Laser class: 1 (closed)/ 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build area: 350 × 350 × 620 mm X-axis (coater): Travel range 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel range 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating systems: Process chamber heating: 3.0 kW, infrared twin-tube heater with pyrometer control Removal chamber heating: 1.6 kW, resistance heater coil with separate temperature monitoring Control & Operation: Process computer with Windows 7 operating system 15.1" TFT display, membrane keyboard & mouse Ethernet network connection Miscellaneous: Noise emission: < 70 dB(A) Electrical data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Nominal power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Mains fuse: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see photo) Base machine with control cabinet & control terminal Exchange frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Subject to changes and errors in technical data. All information is non-binding.) Please feel free to contact us by phone for further questions.

Condition: excellent (used), Year of construction: 2019, HP R2000 Latex hybrid printer Only 130.000m² printed. Full maintenance service done in september, excellent shape. Year: 2018 Extended tables included You can find product presentation on the HP Web pages For further information please refer to enclosed data sheet. Core features: Up to 2.5 m (98-in) wide boards Hfsdpfxov Iz Hce Aacen Maximum media thickness: 5 cm (2-in) 5-liter ink cartridges colors, 3-liter white Indoor Production: 43 m²/hr (463 ft²/hr) - 14 boards/hr

Condition: excellent (used), Year of construction: 2021, Efi Vutek H5 Under service contract since installation in 2021. Configuration: 8 colors + w RIP: not included Productivity: 109 boards per hour Under production. Hfsdpfxjxanwze Aacon Price includes decommissioning and loading on truck. Pictures and videos available upon request. For further technical information, please refer to enclosed brochure.