Used Ingredient Silo for sale (827)

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 230 V, total length: 825 mm, total width: 520 mm, total height: 1,010 mm, tank capacity: 45 l, empty load weight: 145 kg, power: 2.2 kW (2.99 HP), New machine 24 months warranty Advantages: + Tested by our master baker and pastry chef with various doughs + Very robust construction, power transmission with belt drive + No high voltage required - operation with 230V possible! + With 4 feet and a permanently installed bowl + Mobile machine, on swivel wheels with parking brake + Short kneading times with excellent results + With reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with switch-over and shut-off function + Ideally suited for smaller batches + Bowl, center rod and spiral made of stainless steel + Safety grille with shut-off function + Fast spare parts supply within 1-2 working days Technical data: - Flour capacity: 2 - 16 kg - Dough capacity: 3 - 24 kg Prodpfoivdy Iox Akijc - Bowl volume: approx. 45 liters - Motor power: 2.2 kW (kneading spiral & bowl drive) - RPM at 50Hz (level 1 - 10) spiral: 65 - 320 - RPM at 50Hz (level 1 - 10) bowl: 6.5 - 32 - Connection values: 230V - 1 phase - 50Hz - Dimensions in mm: 520 x 825 x 1010 (W x D x H) - Height when flour dust cover is open: 1310 mm - Height upper edge of bowl: 658 mm - Net weight: 145 kg

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  - Output: up to 7,200 bph - 4 cavities - Dimensions: 4960 mm x 3900 mm x 3000 mm  - Weight: 15 t  - Operating hours: 44.736  - Bottles - Volume: 200 ml - 2000 ml   - Max. Diameter: 115 mm  Pjdpfx Akol Hxpksierc - Max. Length: 350 mm - Preforms  - Length: 60 - 200 mm - Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

Year of construction: 2016, condition: new, machine/vehicle number: 435505660, Complete new winch for rolled asphalt silo * NEW * Psdomwit Tepfx Akierc More information Purpose: construction, Usable material: asphalt,

Condition: good (used), Used stainless steel tank / silo Article number: 10575 Prodpsg Sr Atjfx Akisc Volume: 2885 L Type: Standing on 3 legs Height of legs: 690 mm Material (in contact with the medium): 1.4301 / AISI304 Design: Single-walled Bottom: Conical bottom Top: Curved Operating pressure according to nameplate: 3 bar Max. operating temperature: 50 °C Tank dimensions: Diameter: 1500 mm Overall height: 2195 mm Overall width: 1610 mm Overall length: 1735 mm Materials: Inside: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Features: Nameplate: yes Outlet diameter: 114 mm Distance from outlet to bottom: 300 mm Various connections (1x at the bottom, Ø 195 mm; 1x at the top, Ø 164 mm) Side manhole 345x444 mm

Condition: new, Year of construction: 2025, machine/vehicle number: 988906827, Fully mobile ready-mix concrete plant Frumecar Fastmix Prodpfx Ashd I Smjkiec *THE READY-MIX CONCRETE PLANT* - Year of manufacture: New - 2-4 chambers with a capacity of 7-14 m³ - Capacity: 14-25 m³/h depending on the mixer size - Mixer size: 0.5 m³ - 0.75 m³ - 1.0 m³ - Concrete software from Siemens with self-service terminal, new barcode system, and EC card terminal - Concrete discharge conveyor 9m long - Cement silo 32 tons, including cement screw conveyor - Assembly, commissioning, and training included - 2-year warranty - The highest quality plant on the market. All components are produced in Europe. Siemens electric motors and gearboxes are installed. Other plant components are from the market leader, VAM. Typographical errors and errors in this offer are expressly reserved. Only the specific agreements in the order confirmation or the purchase contract are binding. More construction machinery and mixing plants on our website. Further information: Intended use: Construction, Usable material: Concrete, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: new, Year of construction: 2025, machine/vehicle number: 463857676, FRUMECAR EBA 1250 MOBILE CONCRETE MIXING PLANT * 60 m³/h * Year of manufacture: 2021 Condition: New - 4 dosing units - Capacity of dosing units: 25-40 m³ - Capacity: 60 m³/h - Mixer: Twin-shaft compulsory mixer FTS - Mixer size: 1.25 m³ - Frumecar K2 fully automated computer control system - Electrical control: Siemens S7 - Diameter of cement screw: 219 mm - Weighing of aggregates: via conveyor belt - Number of cement silos: 1-3 - Installation included - 2-year warranty from the start of production - Winter enclosure possible Typographical errors and mistakes in this offer are expressly reserved. Only the specific agreements in the order confirmation or purchase agreement are binding. Prjdpfx Akshd I Tgsiec More construction machinery and mixing plants on our website. Further information: Intended use: Construction, Usable material: Concrete, General condition: good, Technical condition: good, Optical condition: good.

Condition: new, Year of construction: 2025, machine/vehicle number: 712520122, FRUMECAR ECA 3000 fully mobile concrete plant Condition: NEW Capacity: 120 m³/h Mixer: Sicoma MAO Pedpfx Ashd Na Uekierc Mixer size: 3 m³ Cement silos: 2 x 55 tons Guarantee: 1 year from startup More machines and mixing plants on our website Further information: Intended use: Construction industry Usable material: Concrete Overall condition: very good Technical condition: very good Visual condition: very good

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total width: 580 mm, total length: 840 mm, total height: 1,380 mm, empty load weight: 250 kg, power: 2.2 kW (2.99 HP), height adjustment type: mechanical, New machine with a 24-month warranty Advantages: + Excellent price-performance ratio + Powerful planetary mixing machine with digital control + 10 speeds with constant power transmission + Equipped with an ingredient hopper and a stainless steel safety guard Podpfohydl Djx Akijrc + The machine shuts down immediately when the guard is lifted + With an integrated dust/splash guard cover + The machine stands on 4 vibration-absorbing adjustable feet + No floor anchoring required + Bowl lift with lever + Bowl support arms made of stainless steel + Closed planetary gearbox made of stainless steel + Can also be used with a 20-liter attachment (optional) + Fast spare parts supply within 1-2 working days STANDARD accessories, included in the price: - 1x 40-liter stainless steel bowl - 1x Mixing beater for 40-liter bowl - 1x Flat beater for 40-liter bowl - 1x Dough hook for 40-liter bowl OPTIONAL accessories, available at an extra cost, prices on request: - Additional 40-liter stainless steel bowl - Additional tools (mixing beater, flat beater, dough hook) - Bowl trolley for 40-liter bowl - 20-liter attachment (1x 20-liter stainless steel bowl + 3 tools for 20-liter bowl) Technical data: - Motor power: 2.2 kW - RPM at 50Hz: 125 - 424 (level 1 - 10) - Fuse: 16A-CEE plug - Connection values: 400V - 3-phase - 50Hz - Dimensions: 580 x 840 x 1380 mm (W x D x H) - Max. 1650 mm height when the hood is opened - Net weight: 250 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total width: 690 mm, total length: 940 mm, total height: 1,470 mm, empty load weight: 300 kg, power: 3 kW (4.08 HP), height adjustment type: mechanical, New machine with a 24-month warranty. Advantages: + Excellent price-performance ratio + Powerful planetary mixing machine with digital control + 10 speeds with constant power transmission + Equipped with an ingredient hopper and a safety guard made of stainless steel + The machine switches off immediately when the guard is lifted + With integrated dust/splash protection cover + The machine stands on 4 vibration-absorbing adjustable feet + No floor anchoring required + Bowl lift with lever + Bowl support arms made of stainless steel + Closed planetary gearbox made of stainless steel + Can also be used with a 30-liter attachment (optional) + Fast spare parts supply within 1-2 working days STANDARD accessories, included in the price: - 1x 60-liter stainless steel bowl - 1x mixing beater for 60-liter bowl - 1x flat beater for 60-liter bowl - 1x dough hook for 60-liter bowl OPTIONAL accessories, available at an extra cost, prices on request: - Additional 60-liter stainless steel bowls - Additional tools (mixing beater, flat beater, dough hook) - Bowl trolley for 60-liter bowls - 30-liter attachment (1x 30-liter stainless steel bowl + 3 tools for 30-liter bowl) Technical data: - Motor power: 3.0 kW Podpfx Ashydl Iekiorc - RPM at 50 Hz: 165 - 450 (level 1 - 10) - Connection values: 400V - 3-phase - 50Hz - 16A-CEE plug - Dimensions: 690 x 940 x 1470 mm (W x D x H) - Max. 1710 mm height when the hood is open - Net weight: 300 kg

Year of construction: 1996, condition: good (used), Stirred tank, agitated container, agitator tank, agitator container, silo system, transport silo, tank, fertilizer storage silo, melting vessel, melting tank -Stainless steel tank: with agitator and vibration limit switch -Contents: 1000 liters -Hazard class: AIII -Agitator: ATB 1.5 kW -without heating -Vibration limit switch: VEGA SWING 83G125Ex -Individual components: see photos / nameplate Prjdpfx Asiiig Njkioc -Number: 5 containers available -Price: per piece -Transport dimensions: 1200/1200/H1885 mm -Weight: 266 kg/unit

Year of construction: 2026, condition: new, functionality: fully functional, Liquid fertilizer / AHL / ASL - Tank, container, storage tank 100,000 liters capacity - factory new - above ground, made of steel sheet. The container complies with DIN-EN 12285-2 (formerly DIN 6616-D), has 2 saddle supports, an access ladder, and is primed on the outside - on untreated sheets. D = 2.90 m - L = approx. 16.00 m. The container will receive a factory-new plastic inner liner, including a leak detection device mounted in a protective box - see sample photo. The plastic inner liner has a "general building authority approval" and is therefore suitable and approved for the storage of liquid fertilizer AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex works - free loading. (Delivery can be offered at a low cost for an additional charge.) We recommend: Sandblasting the above container on the outside, priming it, and completely repainting it - traffic gray / RAL color. (Other RAL colors are also possible upon request!) ASL (ammonium sulfate solution) is a popular liquid fertilizer that is produced in drying plants during the drying of liquid fermentation residues and in exhaust gas purification. ASL containers require a plastic inner liner due to the corrosive properties of the stored medium. Important: The tank shown (sample photo) is a revised 100,000-liter tank that has already been delivered to a customer. The plastic pipelines (PVC connection) are not included in the scope of delivery and can be purchased for an extra charge. In general: You will receive an invoice with VAT shown. Prjdji A Hxvjpfx Akisc The purchase is made according to our general terms and conditions. Other tank systems (new and used) as well as rental systems are also available! In addition, we purchase existing tank systems and can, with certified specialist company qualifications according to WHG (Water Resources Act), professionally empty, clean, dismantle, and transport them. ===== If you have any questions, please contact: ===== Alfred Schneider GmbH & Co. Tankbau KG Mr. Heß / Mr. Jakob Tiefenrod 2 34320 Söhrewald near Kassel / Hesse =====

Condition: new, Year of construction: 2025, Double-Belt weighing system for large volumes of 1-50kg of loose materials as bio-pharmaceuticals, food, farm chemical and fertilizer, building materials, ceramcis, chemicals, drug ingredients, seeds, cereals, charcoal, flow soil, plastic grains, etc. - Specifications: 65 liter hopper; all product contacting parts in stainless steel (SS340); frame in mild steel with painted surface; Accuracy (depending on product): 0,5-1,0%; pre-Set-Option for 10 programs; max. speed of the machine in neutral: 15 cycles/minute. Predpfxev Nmxtj Akijc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), functionality: fully functional, Discover the LUTETIA T3 Churn, an essential piece of equipment to enhance your marinating processes and improve the quality of your meats. Its vacuum system accelerates flavor penetration while preserving the hydration of the ingredients. Furthermore, its stainless steel construction ensures optimal hygiene and quick maintenance. Furthermore, its custom-designed dimensions allow for seamless integration into different production facilities without the need for complex configurations. This gives you greater flexibility when you want to expand your product range. Then, the meat and brine capacity, estimated at 1,450 kg, is a real asset for processing large volumes without sacrificing mixing consistency. With this churn, you'll also reduce wasted time, as its user-friendly interface makes it easy to learn. Furthermore, its dynamic operation limits lump formation, enhancing the final presentation of your preparations. Finally, this robust machine can withstand high production rates and offers a long service life, even in an intensive environment. Prsdpfx Aev Uxatekisc In addition, its airtight lid maintains a stable internal climate and prevents external contamination, a key factor in the food industry. Contact us now to discover how the LUTETIA T3 Churn can enhance your processing operations. You'll benefit from superior performance and precise recipe control, two essential elements for satisfying demanding customers. Technical specifications: Dimensions: L 2782 mm × W 1450 mm × H 2020 mm Capacity (meat + brine): ~1450 kg Operation: Vacuum-sealed for rapid marinating Structure: Stainless steel for enhanced hygiene Weight: ~1500 kg (estimated) for greater stability t7jlRcke

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors Podpfx Ajxfwdokiorc + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate Pjds E Dquepfx Akiorc --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: good (used), functionality: fully functional, color: blue, tank capacity: 80,000 l, machine/vehicle number: AHL-80, storage tank with the capacity of 80.000 liter for liquid fertilizer Predpsb Avh Ajfx Akisc

Year of construction: 2026, condition: excellent (used), Maize leveling blade, silo leveling blade, maize leveling blade -The shield is rounded for better material flow -Working width: 3000 mm -Sign height: 1250 mm -Wall thickness: 18 mm -Delivery time about 2 weeks Psdpsb A H Adefx Akisrc -Weight can be made according to customer requirements -Weight: approx. 1000 kg

Condition: used, Year of construction: 2017, functionality: fully functional, KNOLL FKB 33000 Systems for Chip Processing Pjdpfez D Uvpox Akierc Processing chips offers numerous advantages: if they are dry and sorted by type, disposal costs are reduced. Depending on the material, the chips can even be sold. A chip processing system includes various components, depending on the requirements: conveying and collecting equipment, magnetic separation technology, filters, and volume-reducing briquetting presses. Containers or chip silos are also required. The components can be linked together and operated fully automatically. Application areas The chip processing system is suitable for both semi-automatic and fully automatic processing of metal chips. Automatic conveying systems or operating personnel with trolleys/containers handle the chip transport from the machining centers. The system is used in almost all manufacturing areas of the machining industry. The processing of different materials (e.g., aluminum, steel, or cast iron) can also be realized using separate systems. Features • Chip drying is a prerequisite for safe transport on public roads. • Volume reduction lowers storage and transport costs. • Recovery of chips and coolant saves the environment and reduces costs. Possible main components • Lifting/tipping device • Chip shredder • Chip centrifuge • Chip conveyor • Separation channels • Magnetic separation technology • Briquetting press • Coolant filter and collection container • Control technology and wiring • Container filling • Chip silo

Condition: used, Platform scale up to 30 kg, reading in 10 g steps Podpfx Akoz Nc N Ieierc This stainless steel platform scale weighs from 0.2 to 30 kg with a division of 0.01 kg. The weighing platform sits freely on the table, while the indicator is mounted on a stainless column at eye level. Useful for weighing portions, crates or ingredients. The indicator is an IT1000 with keys for tare, zero, totalising and printing. We did not find a rating plate with the make or year. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Platform scale Weighing range: 0.2 – 30 kg Division: 0.01 kg Indicator: IT1000 on stainless column (tare, zero, totalising, print) Construction: Stainless steel

Condition: used, mileage: 394,000 km, power: 324 kW (440.52 HP), first registration: 06/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 4,500 mm, loading space width: 2,350 mm, loading space height: 900 mm, Year of construction: 2011, Equipment: ABS, air conditioning, crane, MAN TGS 33.440 / 6x4 TIPPER 4,50 m + BORDMATIC + CRANE Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2011 ? MILAGE: 394 000 km EQUIPMENT: ? ABS ? ASR ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? ENGINE BRAKE ? TACHOGRAPH ? AUTOMATIC AIRCONDITION PLATFORM: 450 x 235 x 90 cm (L x W x H) CAPACITY: 11 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 360/140 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING CRANE: PALFINGER EPSILON Q170Z95TR TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Psdpfx Akjz Sig Ueisrc : 28110

Condition: used, functionality: fully functional, Complete stationary sawmill including: Log infeed, transverse conveyor Log lifting device with ejector Transverse conveyor and feeder to the clamping carriage Clamping carriage, hydraulically operated, with auxiliary carriage, electrically operated; the entire sawing line can be controlled from the clamping carriage. FULL SAW FRAME BRAUN CHGB 71/75 with automatic overhang adjustment and stepless feed Saw blade tensioner Jansen, hydraulically operated Electrically adjustable wedge with electric extraction rollers Roller conveyor with pusher Spiral roller conveyor for boards to the edging line Transverse conveyor in front of the edger Undertable cutoff saw Pjdpfxez I Tabe Akiorc DOUBLE EDGER PAUL KMEZ with trim removal system Roller conveyor after the edger with discharge to the left/right Saw blade sharpening machine for saw frames, Vollmer Saw blade setting machine for saw frames, Riva Circular saw sharpening machine, Vollmer Sawdust and trim disposal, shaking chute, vibrating screen with 1 fraction 2 conveyor belts for feeding into the silo

Condition: used, mileage: 732,000 km, power: 380 kW (516.66 HP), first registration: 10/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,300 mm, Equipment: air conditioning, crane, had accident, parking heater, * Manufacturer: Scania * Model: R490 * Axle configuration: 6x4 * Power: 490 hp * Year of manufacture: 2017 * Euro 6 Podezqivmspfx Akierc * Automatic transmission (Opticruise) * Timber carrier / timber rack body * Crane: Palfinger Epsilon M12Z83 * Crane year of manufacture: 2017 * Air suspension * Wheelbase: 3950 / 1350 mm * Air conditioning * Auxiliary heater * Navigation system * Radio / USB / AUX * Aluminum tanks and toolboxes * Condition * Vehicle runs and drives perfectly * Engine and transmission without any known defects * Crane fully functional * Passenger side of the cab damaged in an accident (see pictures) * Windshield damaged and temporarily covered

Condition: good (used), Year of construction: 1987, overall weight: 42,000 kg, total width: 6,000 mm, total length: 7,800 mm, total height: 3,900 mm, sheet thickness (max.): 22 mm, Flanging and dishing machine SCHLEIFSTEIN - KBol 4022 MACH-ID 9659 Make: SCHLEIFSTEIN Type: KBol 4022 Year: 1987 Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Kunkel head forming rolls: R = 350 R = 300 R = 275 R = 250 R = 200 R = 175 R = 150   Basket bottem Podpfszfi Hhsx Akiorc Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo . Usage: Frozen Block cutter for butter and similar products Pedpfx Akez Ht Ebjiorc Electrics: 3~ / 400 v/50hz Air: 6 bar -8bar

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. Prsdpfx Akez Iww Roisc • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).