Used Induction Pipe for sale (3,391)

Condition: used, Year of construction: 2020, tube diameter 16 / 12 mm wall strength 1,5 mm Dsdpfxegvqu Ts Ahuskw bending radius min. je nach Rohr r2 bis 3 x d total power requirement 1,2 kW weight of the machine ca. 0,5 t Shaft diameter 20 mm (standard) Max. Bending radius 60 mm Max. Bending capacity steel 12 x 1.5 Stainless steel 12 x 1 Copper soft 16 x 1 Length feed (accuracy): with electrical drive 0.1 mm Rotation (accuracy): with electrical drive 0.1 ° Three-jaw chuck: Yes Voltage NC 2 / NC 3: 230V / 400V

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 3620 € 38 mm 245 mm 300 mm 320 mm 23 kg 19 cm³ 38 x 1,5 mm 38 x 1,5 mm 35 x 3 mm 30 x 2 mm 35 x 1,5 mm 42 x 1,5 mm 42 x 1,5 mm 50 x 2 mm 50 x 2 mm 50 x 4 mm 20 mm 10 x 25 mm 25 x 20 (stehend), 25 x 1 mm 180 mm 36 mm 10 mm 2,8 U/min 0.9 kW Dodswiqxispfx Ahuskw digital adjustment of the bending angle from 0 - 180 ° single phase motor 220V / 900W electric engine brake indicator light for indicating overload basement made of cast iron, suitable for mounting a tripod (tripod not included) 90° bend in 6 seconds foot pedal without tools OPTIONAL EQUIPMENT: tripod € 330,-

Condition: good (used), Pipe reciprocating saw, pipe jigsaw, beam jigsaw, reciprocating saw, guide holder, pipe clamp -Manufacturer: Fein, holder for pipe reciprocating saw type AST 663 or similar -Clamping: with lashing strap Dsdexalygspfx Ahuokw -Number: 2x holders available -Price: per piece -Box dimensions: 390/310/H425 mm -Weight: 25 kg/piece

Year of construction: 2019, condition: used, The EFD machine we are offering has a capacity of 2000 mm, but once the MF and HF adaptation boxes are installed, this travel is limited to approximately 1700 mm. It is equipped with a Siemens 840 D CNC (replaced 3 months ago), with 3 digitized axes: Z, Y (200 mm), and C, a double spindle with dual tailstock controlled separately, 1 MF adaptation box, and 1 HF adaptation box. The machine height is 4400 mm. The maximum workpiece weight on the main spindle is 600 kg. The maximum weight per piece on the double spindle is 50 kg. The converter is transistor-type, with a power output of 300 kW and equipped with three frequency ranges: 100 kHz at 200 kW, 3 kHz and 10 kHz at 300 kW. Parameter monitoring is integrated into the Siemens 840 D CNC. It will control: voltage, current, power, MF or HF frequency, quench flow rate by analog flowmeter, quench water temperature via PT 100 probe, with a color printer included. Optionally, a serial link is available, allowing program transfer to avoid dual programming for the CNC and the RTM 100. SUPPLIED EQUIPMENT: - 1 galvanic isolation mains transformer, 400 V three-phase + earth (for network disturbance protection and operator safety) - 1 SINAC P M/H transistor converter Power: 20 to 300 kW Frequency: 3 to 100 kHz - 1 medium frequency adaptation box with 55 VT 8 transformer 1 capacitor bank for 3 kHz 1 capacitor bank for 10 kHz - 1 high frequency adaptation box without transformer 1 capacitor bank for 100 kHz - 1 manual selector switch for 3 and 10 kHz selection Dodpfxoxc Exho Ahujkw - 1 manual selector switch for 100 kHz or 3/10 kHz selection - 1 standard vertical traversing hardening machine, type HGL 2000, 3-AXIS, equipped with: - 1 SIEMENS 840 D controller (replaced 3 months ago) - 1 X-axis, vertical travel approx. 1500 mm depending on MF and HF adaptation boxes - 1 Y-axis, horizontal travel 200 mm - 1 C-axis spindle rotation, max workpiece weight 600 kg, max diameter 500 mm (according to inductor) - 1 double spindle with dual tailstock - 1 hydraulic circuit with analog flowmeter for quench water - 1 second hydraulic quench water circuit without flowmeter, solenoid valve controlled by program, no flowmeter supplied - 1 simple interface for high frequency inductor connection - 1 simple interface for medium frequency inductor connection - 1 operator access door - Integrated RTM 100 standard process monitoring system in the Siemens 840 D, with color printer - All necessary electrical interconnections for medium, high frequency, and low voltage - Complete documentation in French (user and operating manuals) This installation is highly versatile due to its wide frequency range (low, medium, and high), all provided by a single generator, making it rare on the market. The high power rating of 300 kW enables the processing of large or two workpieces simultaneously.

Condition: excellent (used), functionality: fully functional, TPS/Miller/Keyplant 6m Pipe Cladding Weld Overlay System Twin head with AVC Dkodpfxju Hfkmj Ahusw Miller Maxstar 700 power sources Miller Maxstar DX 200 hot wire power sources New Heavy duty water cooling unit (Chiller) Heavy duty Hollow Bore Head Stock Pipe diameter clamping range 150mm-750mm

Year of construction: 2020, operating hours: 245 h, condition: good (used), functionality: fully functional, machine/vehicle number: QX20200111A551, Used - Pre insulated pipe decoiler. The decoiler could be used for other pipe types. Pipe coiler parameters: Installed power: 5.5 KW Voltage: 220V Current frequency: 50 Hz Compressed air: 6 Bar Total weight: 1700 kg Coil dimensions: Coil ID: 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400mm Dksdpfx Ahet Eatxeujw Coil OD: up to 3100mm Coil width: up to 1100mm Please call for more information

Condition: as good as new (ex-display), Year of construction: 2022, tube diameter 2" x 3.91 mm GAS tube diameter 60.3 x 4.5 mm ST Dksdpfxjxaa N As Ahuow tube diameter 60.3 x 5.4 mm ALU bar material - diameter 35.0 mm revolutions per minute 2.0 U/min radius min. 2 x D mm bending radius min. 10.0 mm bending radius max. 270 mm external diameter min. 5.0 mm external diameter min. 1/8 Zoll voltage 400 V total power requirement 1.5 kW weight 141 kg range L-W-H 470 x 1050 x 640 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Current new price approx. €9.000 Special price upon request Furnishing: - mandrelless tube bending machine - mechan. Angle adjustment via dial - Tool holder: hexagonal 40 mm + 50 mm - Bending angle: 0 ° to 180 ° (max. 210 ° angle of rotation) - Bending radius: R10 to R270 mm - integrated chassis BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: new, Universal bending machine UB-100 Eccentric quick clamping Readable bending angle up to 120 degrees Weight 35 kg Standard accessories: Infinitely adjustable bending stop Eccentric quick release Angle stop Lever and bending jig Material stop Cold bending: - Flat steel 100 x 5 mm - Square steel 16 x 16 mm - Round steel 18 mm - Angle steel 60 x 8 mm Dkodpfx Ahega T Hveujw Hot bending: - Flat steel 100 x 15 mm - Square steel 30 x 30 mm - Circular steel 30 mm - Angle steel 100 x 12 mm

Condition: good (used), Clamping device, clamp bracket, clamp clamp, clamping bracket, pipe clamp bracket, pipe clamp, pipe clamping system, mounting device for pipes, pipe quick clamp, pipe quick clamp -Pipe clamp: pipe quick release -Clamping range: Ø 25 to 180 mm, see photos -Number: 3x clamps available -Price: per piece -Dimensions: 160/100/H270 mm -Weight: 3.5 kg/piece Dedpfx Aow Upy Uehujkw

Condition: new, functionality: fully functional, Year of construction: 2022, operating hours: 1 h, The machine is capable of producing pipe clamps. It has never been used for mass production, only a few test productions were made on it. Selling due to a failed project. The offer includes the press machine with 6 tools and the associated nut welding machine. The sizes of the tools: Dkjdpfsxuhd Dsx Ahuew • 40-44 • 48-54 • 55-59 • 60-66 • 68-73 • 75-80

Year of construction: 1965, condition: used, machine/vehicle number: 2383, for tube-Ø: 250 - 530 mm for material thickness: 3 - 40 mm drive: by hand Djdpfx Ahsb Nv Stoujkw space requirement: 1000 x 800 x 1200 mm Weight: approx. 70 kg

Year of construction: 2019, condition: used, Pipe bending machine DW75NC Europe Design Semi Automatic with Measurements Panels Pipe Bender. The DW75 semi-automatic pipe bending machines are easy to operate, robustly constructed, and achieve excellent bending results. The NC program precisely controls the bend angle (Y-axis) and rotation (Z-axis). The distance between the bends (X-axis) is configured using easily adjustable and very precise mechanical stops. Entering a new bending program is very intuitive with the help of an industrial touch controller and the accurate and user-friendly software. The DW75 semiautomatic pipe bender is by far the most efficient machine in its class to minimize energy consumption. BLMA as top 10 tube bending manufacturers offer a wide assortment of 5- Axes NC tube bending machine. The DW75 semi-automatic tube bender is fabricated from the finest quality of raw materials to provide maximum durability and long service life. Used in various industrial uses, these are highly acknowledged for Its specific design, precision, and standard performance. Dedpfji Ewy Tex Ahujkw Main specification Max bending capacity: ¢75mm x 5mm Max bending radius: R400mm Bending degree: 0-190° Max effective distance of mandrel: 2800mm Motor power: 7.5Kw Max hydraulic pressure 12Mpa Oil tank capability 250L Measurement: 400 x 100 x 110cm Weight of machine: 2000kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 297003, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (top) diameter: 155 mm, side roll diameter: 155 mm, overall weight: 400 kg, total length: 1,000 mm, total width: 750 mm, total height: 1,400 mm, Equipment: documentation/manual, emergency stop, foot remote control, swiveling upper roller, SAHINLER PK 50+ tube and profile bending machine with digital bending indicator. The machine is in very good technical condition. Price net plus 23% VAT (applicable within Poland). Dedpfx Ahsxr Dnyjuokw

Condition: used, Year of construction: 2025, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V total power requirement 2,5 /3,3 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,2 x 0,75 x 1,4 m Dsdpsxcg Evofx Ahuekw Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers

Condition: good (used), Clamping device, clamp bracket, clamp clamp, clamping bracket, pipe clamp bracket, pipe clamp, pipe clamping system, mounting device for pipes, pipe quick clamp, pipe quick clamp -Pipe clamp: pipe quick release Dkodpew Upx Rsfx Ahuow -Clamping range: Ø 40 to 180 mm, see photos -Dimensions: 230/120/H310 mm -Weight: 3.5 kg

Year of construction: 2003, condition: excellent (used), KUAG PIPE-HAUL-OFF 400/4 CATERPILLAR Year of construction: 2003 Caterpillars: 4 with synchronous drive Diameter: Min 40mm Max 400mm Take-off speed: 0.2 - 10 m/min Condition: Very good operational Dkedewqym Eopfx Ahuew Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: ready for operation (used), machine/vehicle number: 64532, used hand hydraulic tube bending machine existing bending segments: 3/8, 3/4, 1 1/4 u. 2" space requirement: 850 x 640 x 780 mm Dksdpfx Ajdzw Hwohuew

Year of construction: 2024, condition: new, functionality: fully functional, Since 1997, Copier Machinery has been dedicated to providing the best solution for metal pipe fabrication, accompanied by fast worldwide service and support. We offer a wide portfolio of pipe preparation machinery for cutting, beveling, end working, welding, and roll grooving, focusing on innovation, stability, reliability, and premium quality. Djdpfjw U Ek Ajx Ahuokw Beaver 3 S Manual - Stationary Pipe Beveling Machine ----- Machining range: Pipes and tubes with outside diameter between 0.25" - 3" (12mm - 90mm). Maximum wall thickness in one pass: 12mm ----- Copier’s state-of-the-art stationary beveling machines are user-friendly, equipped with a pipe stop and feed stop to ensure perfect set-up. Nearly every weld type can be achieved with more than 350 machine tooling options. The robust and durable design guarantees a minimum product lifespan of 25 years with low maintenance requirements.

Condition: new, Hydraulic pipe S235JR: 54 x 4 mm Aluminum tube: 54 x 5 mm Steel pipe: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Copper or brass tube: 54 x 4 mm Gas pipe for pipelines: 1 1/2" Max bending angle: 180° Max bending radius: 150 mm Engine power: 1.1 kW Voltage: 400 V Machine dimensions (W x D x H)*: 700 x 230 x 520 mm Weight approx.: 107 kg *without base. Dsdpocvvc Hofx Ahujkw Base not included in delivery. It is of course available at an extra cost.

Year of construction: 2009, condition: as good as new (ex-display), the original packed parts you find in the attached file, the parts in the blue boxes are not counted Dkjdpfxef S Hc Ss Ahuew any question, just ask

Condition: good (used), Pipe reciprocating saw, pipe jigsaw, beam jigsaw, reciprocating saw, foxtail saw, jigsaw -Nominal power consumption: 750 W -Stroke length: 60 mm Dkedpfx Aheb A I Tuoujw -Max. material thickness -Pipes up to: max. Ø 300 mm -various saw blades -Weight: 5 kg

Condition: good (used), Year of construction: 1977, machine/vehicle number: 22247, Offered 23250 Technical data: - Bending performance - Pipe at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° Dedpov Hzr Nefx Ahuskw - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg - with - Pipe circular saw - Inside and outside pipe deburring device - Pipe necking device - Without tools

Condition: new, Technical data: Belt speed: 15 / 30 m/s Sanding diameter: 20 - 76 mm Carriage adjustment: 30° - 90° Surface grinding table: 400 x 100 mm Contact wheel ø x W: 195 x 100 mm Suction connection ø: 2 x 75 mm Speed: 1420 / 2660 1/min Motor power: 2.5 / 3.3 kW Dimensions (WxDxH), approx.: 750 x 1400 x 1200 mm Weight, approx.: 148 kg Features: - Consistent belt tension due to spring-loaded tensioning device - With cylindrical sanding device for sanding diameters from diam. 20 - 76 mm as standard - Quick and easy adjustment of the desired sanding angle - Graphite coating on the face grinding surface increases the sliding properties of the sanding belt - Large flat sanding surface with protective cover Dkodpfxsqvmqyj Ahuew - Slow belt speed (15 m/s) optimal for sanding stainless steel and aluminum - User-friendly belt change, quick and uncomplicated - Quick and easy changing of the sanding rollers without tools - Various sanding angles from 30° to 90° easily possible - Shorter processing times compared to milling Scope of delivery: - Sanding belt K 36 - Rubberized sanding drum - 1 sanding roller for 1 1/4" (42/44 mm pipe) - 2 hinged protective discs - Sanding and support table - 2 x dust extraction nozzles diam. 75 mm - 2 x chip container - Graphite coating - Motor protection switch

Condition: good (used), Year of construction: 2005, Offer 25190 Dodswp Exdspfx Ahujkw Technical Data approx.: - max. temperature 400°C - temperature control 0 - 250°C - time automatic 0 - 60 min. - working space under the yoke 320 - 200 mm - max. ball bearing weight 250 kg - drive 400 V / 12 kVA - space requirement approx. W 850 x D 600 x H 1150 mm - weight approx. 150 kg - yokes 40 + 50 + 80 mm - mobile base

Condition: good (used), Year of construction: 2019, machine/vehicle number: 250-19, Offer 25283 Technical Specifications: - Saw blade speed, frequency controlled, for very fine cutting - Saw blade diameter: 200 mm - Automatic operation cycle - Pressure stop with SICO counter for setting the glass pressing force - Simulation Dodpfx Ahjw Nhumeuskw - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand