Used Hyundai Robex 80 Cr 9 for sale (173)

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Hyundai P086TI-1, General information Field of application: Construction Serial number: 20250501001 Weights Empty weight: 2.035 kg Functional Generator capacity: 165 kVA CE mark: yes Other information Codpow Sc Dujfx Adxjhd Fuel consumption: 26.7 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 185 l Transport dimensions (LxWxH): 3,308x1,13x1,8 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai P086TI-1 / Doosan P086TI-1

Condition: used, Year of construction: 2018, Husqvarna LF 130 vibratory plate - Vibratory plate - Engine 2.5 kW - Hatz diesel engine Errors and prior sale excepted. Chsdpfoxnvfvex Adxod Internal vehicle number: W73

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Cjdpexdxhrjfx Adxshd Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,917 h, Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 8000 Number of axis 3 Movement X-Axis Movement 1060 mm Y-Axis Movement 510 mm Z-Axis Movement 635 mm Table Table load 800 kg Tools Codexuaz Ispfx Adxehd Type of tool holder BT40 This 3-axis Hyundai WIA F500 + was manufactured in 2019. It features a Siemens SINUMERIK 828D control unit, a spindle speed of up to 8,000 rpm, and a spindle motor power of 15/11 kW. The machine includes a CNC vertical machining center, chip conveyor, automatic tool changer, and internal cooling system. If you are looking to get high-quality milling capabilities, consider the Hyundai WIA F500 + machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Empty weight: 100 kg HDG6500T Occ stroomgroep HDG6500T Hyundai Chsdpfexl I H Hex Adxed 6.5kva Article nr.: W304177006-veiling Used generator HDG6500T Hyundai 6.5kva

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning length: 900 mm, turning diameter: 300 mm, spindle bore: 86 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 270 mm, controller model: FANUC 31i-B, TECHNICAL DETAILS Swing diameter over bed: 780 mm Swing diameter over slide: 700 mm Maximum turning diameter: 300 mm Maximum turning length: 900 mm Bar capacity: 76 mm Spindle Chuck size (main/sub-spindle): Ø254 mm Spindle bore (main/sub-spindle): Ø86 mm Spindle speed: 4,000 rpm Spindle motor (max./continuous): 26 / 15 kW Spindle drive: integrated motor Spindle flange: A2–8 C-axis indexing: 0.001° Travel axes X1/X2 axis: 270 / 190 mm Z1/Z2 axis: 920 mm Y axis: ±120 mm Rapid traverses Rapid traverse speed X/Y/Z axes: 24 / 24 / 24 m/min Rapid traverse speed ZB axis: 12 m/min Guideway system: Box Guide Turret Tool stations: 2 × 12 External tool size: Ø25 mm Internal tool size: Ø40 mm Indexing time: 0.2 s/step Turret system: Wedge type Chsdpfx Aexltbcedxed Driven tools Motor power (max./continuous): 5.5 / 2.2 kW Tool speed: 4,000 rpm Collet size: Ø20 ER32 Tool type: BMT65 MACHINE DETAILS Control: FANUC 31i-B Tank and supply system Coolant tank: 230 l Lubrication tank: 8 l Electrical data Power consumption: 69 kVA Line voltage: 220 / 400 V Dimensions & weight Dimensions (L × W x H): 3,670 × 2,170 x 2,601 mm Weight: 11,000 kg EQUIPMENT LNS bar feeder

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Hyundai DP222LC, General information Chodpfjxivr Esx Adxod Field of application: Construction Serial number: 20250605009 Weights Empty weight: 6.185 kg Functional Generator capacity: 825 kVA CE mark: yes Other information Fuel consumption: 119 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1090 l Transport dimensions (LxWxH): 4,808x1,95x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai DP222LC / Doosan DP222LC

Condition: good (used), Year of construction: 2000, Vertical machining center, Hyundai brand, model SPT-T30, year 2000. Maximum spindle speed: 8,000 RPM, X travel: 500 mm, Y: 300 mm, Z: 300 mm, ISO 30 taper, worktable: 900 x 600 mm, 14-position tool magazine… Cjdeu Apw Ajpfx Adxshd

Condition: used, Year of construction: 2020, operating hours: 546 h, Hyundai HX 10 A Micro Excavator - Incl. Atlas Copco chisel from year: 2010 - Operating hours: 502 hrs Codpsxiumbofx Adxjhd - LED work lights - Hydraulic chassis - Rotating beacon - Minimum width 70 cm Errors and prior sale excepted. Internal vehicle number: W30

Year of construction: 1999, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 2 Turret Codpfoxgkctjx Adxehd Tool taper vdi 400 This Hyundai HIT 20 M was manufactured in 1999. It's a horizontal turning machine featuring a VDI400 tooling interface. Consider the opportunity to buy this Hyundai HIT 20 M horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, New: Yes Empty weight: 159 kg Type number: HDG88 HDG88 Frequency 50 Hz Rated Power 6.3 kva 230V Max. Power 7.9 kva 380V Tension 400 | 230 V Current 14 (380) / 23 (220) A Plugs 1xPCE5p (380) / 1x32A(220) Codpfexlv S Dex Adxjhd Display LED5 Tank Capacity 14 L Running Time 50% load 13 h Noise Level 7 Mts; 50% load 77 dBA DC Output 13 mm DC Output 12 / 8.3 V/A Battery 36 Ah Engine Type Diesel Model HDG88 Power Output 14 HP Start method Electric Displacement 498 cc Oil Capacity 1,65 L Alternator A6T Rated Power 7kW / 8kW Power Factor 1 Voltage Regulation AVR / Brush Net Weight 172 kg Gross Weight 182 kg OEM : HDG88 Article nr.: HDG88-veiling Genset Hyundai HDG88 8KVA 14HP

Condition: used, Year of construction: 2023, operating hours: 522 h, ATTENTION VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection appointments must be arranged in advance without exception. Hyundai HL 970A 4x4 - Including bucket - Tyres: 26.5 R25 - Radio - Operating hours: 522 - Reversing camera - Air conditioning - Central lubrication system Cjdpfx Adsxhbmfoxjhd Subject to errors and prior sale. Internal vehicle number: W47 ATTENTION VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection appointments must be arranged in advance without exception.

Condition: ready for operation (used), Year of construction: 2018, Main Drive Spindle speed range 15000 Number of axis 3 This 3-axis Hyundai WIA KF 5600 vertical machining center was manufactured in 2018. It features a 30-position automatic tool changer, a high-speed spindle at 15,000 rpm with BBT40 taper, and advanced Siemens software options including 3D simulation and real-time machining recording. Ideal for precision machining with its equipped glass rods for accurate measurements. Consider the opportunity to buy this Hyundai WIA KF 5600 vertical machining center. Contact us for more information about this machine. Application Types Milling Chedpfxexuw Eds Adxsd

Condition: used, New: Yes Empty weight: 1.050 kg Type number: HHDD100 HHDD100 1500RPM - 100KVA Chjdpjxhzk Refx Adxjd 400/230V 93lt 10.7 l/h 67DB 2770 X 1080 X 1450 MM OEM : HHDD100 Article nr.: W304177003N-veiling Genset Hyundai 100KVA HHDD100

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Pickup dates must be agreed upon in advance without exception. Hyundai HW 140A wheeled excavator - without attachments - tyres: 10.00-20 - radio - operating hours: 5 Errors and prior sale excepted. Cedjxhbl Uopfx Adxjhd Internal vehicle number: W38 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Inspections are only possible to a limited extent. Pickup dates must be agreed upon in advance without exception.

Condition: ready for operation (used), Year of construction: 2014, Main Drive Spindle speed range 24000 Spindle motor power 33/25 kW Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 50 m/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 50 m/min Z-Axis Movement 450 mm Z-Axis Rapid Traverse 50 m/min Table Table load 800 kg Cjdjxpkprjpfx Adxehd Tools Number of index 24 This 5-axis Hyundai Wia Hi-MOLD 560/5A vertical machining centre was manufactured in 2014. It features a table size of 1,250×600 mm, a maximum load capacity of 800 kg, and a high-speed spindle with 24,000 RPM and 33 kW power. The machine offers rapid feed rates of 50 m/min in all axes and a quick tool change time of 5.5 seconds. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia Hi-MOLD 560/5A machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, New: Yes Empty weight: 500 kg Type number: HHDD45 HHDD45 1500RPM - 45KVA 400/230V 93lt Chedpfx Asxhy E Todxed 10.7 l/h 67DB 2220 X 850 X 1033MM OEM : HHDD45 Article nr.: W304177004N-veiling Genset Hyundai 45KVA HHDD45

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be arranged in advance without exception. Chodoxhbmljpfx Adxsd Hyundai HL 975 A CVT 4x4 - Includes bucket - NEW VEHICLE - Tyres: 26.5 R25 - Radio - Operating hours: 32 - Rear-view camera - Air conditioning - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W46 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be arranged in advance without exception.

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 18000 Main Drive Spindle speed range 20000 Number of axis 5 Movement X-Axis Movement 650 mm X-Axis Rapid Traverse 50 m/min Y-Axis Movement 765 mm Y-Axis Rapid Traverse 50 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 50 m/min Table Csdpfexpkpxsx Adxehd Table load 500 kg Tools Slots in storage 30 This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, New: No Empty weight: 8 kg Chedpfexhr Elox Adxed Part suitable for: trucks Type number: TM000A22501 HDL150 Detroit diesel OEM : TM000A22501 Article nr.: V151177001-veiling Used Starter Hyundai truck HDL150 12V

Condition: new, Year of construction: 2023, ATTENTION: Vehicle location is 66793 Saarwellingen. Viewings are only possible to a limited extent. Pickup dates must be arranged in advance without exception. Hyundai HL 970A XT 4x4 with bucket Cjdpfx Aoxhbkdedxjhd - Including bucket - Radio - Operating hours: 10 hrs - LED work lights - Transport width: 2.97 m - Engine power: 242 kW - Displacement: 8.9 L Errors and prior sale excepted. Internal vehicle number: W37

Condition: ready for operation (used), Year of construction: 2014, General Data Chsdoxpkplspfx Adxod Machine weight 23500 Main Drive Spindle speed range 8000 Spindle motor power 22 kw Number of axis 3 Movement X-Axis Movement 2450 mm Y-Axis Movement 950 mm Z-Axis Movement 850 mm Table Outer length 2700 mm Outer width 950 mm Table load 4500 Tools Slots in storage 30 This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2016, operating hours: 1,985 h, PLEASE NOTE: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Chedpfx Adjxhbigoxsd Hyundai HL 970 4x4 - Incl. bucket - Tyres: 26.5 R25 - Radio - Operating hours: 1,985 - Reversing camera - Air conditioning - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W50 PLEASE NOTE: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance.

Condition: new, Year of construction: 2022, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Cjdpfxsxhbias Adxehd Collection dates must be agreed upon in advance. Hyundai HX 145A - New vehicle - Crawler excavator - Track drive - Rubber tracks - Without attachments - Radio - Operating hours: 16.9 - Engine 100 kW - Camera - Central lubrication system Errors and prior sale excepted. Internal vehicle number: W63 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance.

Condition: new, Year of construction: 2023, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Hyundai HX 220AL - New vehicle - Crawler excavator - Track drive - Without attachments Csdpexhbhvefx Adxshd - Radio - Operating hours: 15.7 - Engine: 129 kW - Camera - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W64 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance.