Used Hyundai Robex 250 Lc 7 for sale (148)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 610 mm, turning diameter: 300 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 680 mm, bar passage: 81 mm, C-AXIS + Y-AXIS 2 + 2 motorized tools Redpfx Aox Hpnkedzscf QUICK LOAD SERVO LNS III tool changer RECONDITIONED SPINDLE LINE

Condition: excellent (used), functionality: fully functional, power: 203 kW (276.00 HP), overall weight: 20,100 kg, axle configuration: 4x4, number of seats: 1, Year of construction: 2019, operating hours: 14,695 h, Equipment: air conditioning, all wheel drive, cabin, centralized greasing system, differential lock, hydraulics, quick-change device, trailer coupling, Hyundai HL965/HySW/40 km/h/Air Conditioning/CSA • Manufacturer: Hyundai • Model: HL965 • Year of manufacture: 2019 • Operating hours: 14,695 h • Engine model: Cummins QSL9 • Power: 203 kW / 276 hp • All-wheel drive • Differential lock • ROPS/FOPS certified • Rear-view camera • 360° camera • Air-suspended driver's seat • Multifunction display • ESC (Electronic Stability Control) • Air conditioning • Window ventilation • Central lubrication system • High- and low-speed range • Max. travel speed: 40 km/h • Radio • Total weight: 20,100 kg • German machine • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale. - Errors and/or typographical mistakes excepted. Rodjyq Rt Ijpfx Adzjcf - Sale is according to our General Terms and Conditions.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,000 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, controller manufacturer: FANUC, controller model: Series 32i – MODEL A, total height: 2,835 mm, total width: 2,670 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 7,700 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Hyundai Wia F500 was manufactured in 2012. It features a table size of 1,000 × 450 mm and a maximum table load of 600 kg. The spindle speed can reach up to 10,000 rpm, with a continuous power output of 15 kW. If you are looking to get high-quality machining capabilities, consider the Hyundai Wia F500 vertical machining centre we have for sale. Contact us for further details. Control Unit: FANUC Series 32i – MODEL AVoltage: 380 V (3Ø)Frequency: 50 HzRated Power: 23 kVAFull Load Current: 35 AControl Voltage: AC 110 V / DC 24 VSpindle Taper: BT40Spindle Speed Range: Up to 10000 rpmSpindle Power Output (Continuous): 15/11 kW (20/15 HP)Spindle Power Output (Maximum): 20/15 kW (25/20 HP)Spindle Torque (Continuous): 286/143 NmSpindle Drive: Direct Drive (Direct Coupled)Distance from Table to Spindle Nose: 130–650 mmDistance from Column to Spindle Center: 475 mmRapid Traverse (X/Y/Z): 32 / 32 / 32 m/minTool Changer: 30-PositionTool Holder: BT40Maximum Tool Diameter: 90 / 150 mmMaximum Tool Length: 300 mmMaximum Tool Weight: 8 kgTool Change Time (T-T): 1.8 secTool Change Time (C-C): 5.9 secInternal Coolant Pressure: 20 barCoolant Tank Capacity: 300 LLubrication Tank Capacity: 2.6 LHydraulic Tank Capacity: 11 LAir Consumption: 250 l/minPower Requirement: Over 25 kVAOperating Hours: Approx. 12000 hSpare Spindle (Optional, not included)Approx. 105 Tools (Optional, not included) Technical Specification Rcsdpfx Adozimp Ujzef Taper Size BT 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2012, spindle motor power: 15,000 W, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 580 mm, total height: 2,225 mm, total width: 1,725 mm, bar diameter (max.): 65 mm, overall weight: 4,570 kg, controller manufacturer: FANUC, controller model: Series 18i-TB, product length (max.): 3,039 mm, workpiece diameter (max.): 335 mm, number of slots in tool magazine: 12, number of axes: 4, This 4-axis Hyundai Wia L2100SY turn-mill centre was manufactured in 2012. It features a maximum turning diameter of 335 mm and a turning length of 455 mm. The machine is equipped with a 12-station turret and a spindle speed of up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia L2100SY machine we have for sale. Contact us for further details. Rcedpfjzimmgox Adzof Control Unit: FANUC Series 18i-TBVoltage: 380 V (3Ø)Frequency: 50 HzRated Power: 33 kVAFull Load Current: 51 AControl Voltage: AC 110 V / DC 24 VSwing Over Bed: Ø630 mm (24.8")Swing Over Carriage: Ø390 mm (15.4")Max. Turning Diameter: Ø335 mm (13.2")Max. Turning Length: 455 mm (17.8")Bar Capacity: Ø65 mm (2.6")Chuck Size: Ø210 mm (8")Spindle Bore: Ø76 mm (3")Spindle Speed Range: 45–4,500 rpmSpindle Motor (Continuous): 15/11 kW (20/15 HP)Spindle Motor (Maximum): 25.4/18.5 kWSpindle Torque (Continuous): 254.2 NmSpindle Torque (Maximum): 597.7 NmSpindle Nose: A2-6Rapid Traverse X/Y: 24/24 m/minRapid Traverse Z: 18/12 m/minSlide Type: Box GuideTurret: BMT65OD Tool Size: □25 × 25 mmID Tool Size: Ø50 mm (2")Indexing Time: 0.2 sec/stepX-Axis Motor: 5.5/3.7 kWZ-Axis Motor: 5.5/3.7 kWTorque: 5,000 NmCoolant Tank Capacity: 220 L (58.1 gal)Lubrication Tank Capacity: 0.9 L (0.5 gal)Power Requirement: Over 35 kVAMain Spindle Chuck: Samchully MH-208Sub Spindle Chuck: Samchully HS-06Chuck Jaws optional Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 100 mm, travel distance Z-axis: 290 mm, Control: Fanuc 0-T Max. spindle speed: 6000 rpm Chuck size: 6 in Max. machining diameter: 160 mm Max. machining length: 285 mm Spindle bore: 40 mm X-axis travel: 100 mm Z-axis travel: 290 mm Axes: 2 Tool positions: 8 Turret stations: 8 Tailstock: Included Made in: South Korea Year: 2002 Swing Over Bed: 300 mm Spindle Power: 11 kW Weight: 2600 kg Redpfx Adozr I Auszocf Length: 2000 mm Width: 1100 mm Height: 1300 mm

Condition: used, functionality: limited functionality, Year of construction: 2014, operating hours: 1,220 h, load capacity: 2,500 kg, lifting height: 4,705 mm, free lift: 1,472 mm, fuel type: electric, mast type: triplex, construction height: 2,162 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: poor Battery voltage: 48V Sideshift, Rcedpfx Aswwytrsdzof 3rd valve, 4th valve, heating, full cabin,

Condition: new, Year of construction: 2024, functionality: fully functional, HYUNDAI-WIA SE2200M CNC LATHE WITH FANUC 0IT PLUS CONTROL AND C-AXIS MACHINE CONSTRUCTION & FEATURES  8” STANDARD CHUCK SIZE.  30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HIGH PERFORMANCE ROLLER LM GUIDEWAYS.  12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION INCLUDED]  4,500 RPM HIGH POWER MAIN SPINDLE.  30 X 36 M/MIN RAPID TRAVERSE RATES - X & Z AXES.  C-AXIS MAIN SPINDLE.  ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. MACHINE CAPACITIES Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 288 MM Bar Capacity - Main Ø 65 MM MAIN SPINDLE Chuck Size 8” Ø 203 MM Spindle Bore Ø 75 MM Spindle Speed (Rpm) 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max.) 167 NM Spindle Type BELT Spindle Nose A2-6 C-Axis Indexing 360° (0.001°) FEED Travel X 210 MM Travel Z 340 MM Rapid Speed X 30 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDE TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP LIVE TOOL Motor (Max / Cont.) 2.75 / 1.85 KW Milling Tool Speed 6,000 RPM Torque (Max.) 26.2 NM Collet Size ER 20 - Ø 13 Type BMT45 TAILSTOCK HYDRAULIC NC TAILSTOCK (STD LIVE CENTRE) Taper MT 4 Quill Diameter Ø 56 MM Tailstock Travel 580 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 0.7 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Rjdpfxsx Trgcs Adzscf Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 2,220 X 1,610 MM Height 1,700 MM Weight 3,250 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO (RENISHAW) HYDRAULIC TYPE NC TAILSTOCK TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-i (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FRONT DOOR INTERLOCK FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER TOOLBOX STANDARD TOOLING PACKAGE

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre Rodpfx Adew Dcdyezocf • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Redpfx Aslrqiqsdzocf Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: used, functionality: fully functional, machine/vehicle number: 0712, Year of construction: 2022, operating hours: 304 h, load capacity: 5,000 kg, lifting height: 5,962 mm, free lift: 1,617 mm, fuel type: electric, mast type: triplex, construction height: 2,840 mm, fork carriage width: 1,376 mm, fork length: 1,200 mm, empty load weight: 8,150 kg, total length: 4,260 mm, drive type: Elektro, construction width: 1,424 mm, Electric 4-wheel forklift Chassis number: 0712 Load center: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: As new Technical condition: Very good Front tires type: Non-marking Front tires condition: 80–100% Rear tires type: Non-marking Rear tires condition: 80–100% Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: TAB Rjdpfxezr Arks Adzscf Battery type: PzS Battery year: 2021 Battery condition: 80–100% Load backrest, Mechanical control levers 3rd valve, 4th valve, rear work lights, front work lights, CE certificate, safety light, interior mirror, LED, seat, Rear beacon.

Year of construction: 2018, condition: ready for operation (used), A Hyundai Wia CNC turning center is offered. Max. turning diameter: 560mm, swing diameter over bed: 780mm, swing diameter over slide: 535mm, max. turning length: 1180mm, chuck diameter: 381mm, main spindle bore: 130mm, max. bar capacity: 117mm, max. spindle speed: 2000rpm, spindle power: 37kW/30kW, max. spindle torque: approx. 3073Nm/2490Nm, turret: 12, tool interface: BMT-75, live tools: max. 4000rpm, 7.5kW/5.5kW, X/Z travel: 320mm/1200mm, rapid traverse X: 20m/min, rapid traverse Z: 25m/min, coolant tank capacity: 300l, control: FANUC Series 32i-B, control ON: approx. 10574h, operating time: approx. 5606h, cutting time: approx. 4876h, total parts count: 30968, weight: approx. 11t. Equipment: C-axis, live tools, automatic tool measurement in the working area, programmable tailstock with MT5 quill, high-pressure through-tool coolant (20bar), hydraulic 15-inch power chuck, Manual Guide i, electronic handwheel, tool load monitoring (HWTM), central lubrication and hinge belt chip conveyor. Documentation available. Inspection by appointment possible. Rjdpfx Ajznmx Todzjcf

Condition: good (used), Year of construction: 2014, Traverses; 800 x 460 x 520mm, Table size 1000 x 460mm, Table load 600 kgs, Spindle speed 8,000 rpm, Spindle power 11/15Kw, Rcodpsu Ehi Aefx Adzjf spindle taper BT40, 24 station ATC , Fanuc I series, coolant, swarf conveyor.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 112 h, load capacity: 3,500 kg, lifting height: 5,020 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, empty load weight: 6,275 kg, total length: 4,219 mm, drive type: Diesel, construction width: 1,370 mm, Diesel forklift Load center: 600 mm Fork width: 122 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 – 4,999 kg Mast type: Triplex Condition: As new Technical condition: Very good Front tires type: Pneumatic Rear tires type: Pneumatic Load guard, 3rd valve, 4th valve, rear work light, front work light, roof cover, LED warning beacon, auto tilt Rsdpjzrcv Ajfx Adzecf

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,434 h, load capacity: 3,500 kg, lifting height: 6,005 mm, free lift: 1,563 mm, fuel type: electric, mast type: triplex, construction height: 2,743 mm, empty load weight: 5,605 kg, total length: 3,650 mm, drive type: Elektro, construction width: 1,245 mm, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 23x10-12 Rear tire type: Superelastic Rear tire size: 18x7-8 Battery voltage: 80V Battery capacity: 700Ah Battery year: 2021 Rcjdezrcrdjpfx Adzjf Load guard, side shifter, 3rd valve, 4th valve, rear work light, front work light, load guard, 4th valve piped to fork carriage, panorama mirror, LED lighting

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 2 h, load capacity: 8,000 kg, lifting height: 5,070 mm, free lift: 1,640 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, fork length: 1,200 mm, empty load weight: 12,435 kg, total length: 5,170 mm, drive type: Diesel, construction width: 2,194 mm, Diesel forklift Rjdozrcivspfx Adzjcf Load centre: 600 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: New unit Technical condition: New Front tyres type: Solid rubber Front tyres size: 8.25-15-14PR Front tyres condition: New Rear tyres type: Solid rubber Rear tyres size: 8.25-15-14PR Rear tyres condition: New Side shifter or fork positioner optional as well as other attachments. 3rd valve, 4th valve, rear work light, front work light, heater, load backrest, full cabin, air conditioning, full free lift, CE certificate, external mirrors, LED, seat,

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 8,000 kg, lifting height: 5,070 mm, free lift: 1,640 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, fork length: 1,200 mm, empty load weight: 11,518 kg, total length: 3,970 mm, drive type: Diesel, construction width: 2,194 mm, Diesel forklift ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: New machine Technical condition: New Rcodpfxezrcfwe Adzef Front tire condition: New Rear tire condition: New 3rd valve, 4th valve, rear work lights, front work lights, roof cover, front windshield, heater, load guard, full cabin, full free lift, CE certificate, beacon, windscreen wiper, seat,

Condition: new, functionality: fully functional, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 5,540 mm, free lift: 1,436 mm, fuel type: electric, mast type: triplex, construction height: 2,429 mm, fork length: 1,200 mm, empty load weight: 3,328 kg, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 mm Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New machine Technical condition: New Front tyre size: SE solid rubber Rear tyre size: SE solid rubber Battery voltage: 48V Battery capacity: 750Ah Battery year: 2023 Sideshifter, Rcodpfezrcansx Adzjf Integrated 3rd valve, 4th valve, rear work lights, front work lights, load guard, CE certificate, Rear flash beacon, panoramic rear-view mirror, fingertip control,

Condition: used, Year of construction: 2018, operating hours: 3,054 h, Hyundai HW 180 Mobile Excavator, Year of Manufacture: 2018, Operating Hours: only 3,054 hours!, HS10 hydraulic quick coupler, hydraulic trencher, blade support, adjustable boom, hammer and shear hydraulics, camera on the right, left, and rear, radio, air conditioning, Engine: [127 kW/173 hp], Weight: 18,770 kg, in good condition, ready for use!, Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! Quick-change device = More information = Redpfezmlmmex Adzscf Drive: Wheeled Contact Tobias Ebert for more information.

Condition: excellent (used), Year of construction: 2015, Year of production: 2015 Rcsdpfstu Tp Sjx Adzsf Range: 2239 mm Control: Panasonic WG III Lifting capacity: 80 kg

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Rsdezfx Tkepfx Adzscf Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Spindle speed 4,500 rpm 8-position turret Chip conveyor

Condition: excellent (used), Year of construction: 2007, Type: Industrial robot Brand: Hyundai / Hanwha TechM Year of production: 2007 Maximum load: Rodper Iy Nksfx Adzecf 200kg

Condition: excellent (used), Year of construction: 2010, Year of manufacture: 2010 Reach: 2666 mm Control: Hi5-N00 Load capacity: 200 kg Rcedpfxoyu Ik So Adzsf

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0014, Year of construction: 2013, operating hours: 8,786 h, load capacity: 1,000 kg, lifting height: 4,735 mm, free lift: 1,614 mm, fuel type: electric, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,000 kg Lifting height: 4,735 mm Free lift: 1,614 mm Overall height: 2,120 mm MACHINE DETAILS Mast type: Triplex Fuel type: Electric ISO class: 2 (1,000–2,500 kg) Rjdpfx Adjzrgc Tezecf Battery voltage: 24 V Operating hours: 8,786 h EQUIPMENT Side shifter External reference: SL14355SP

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Rcjdpfx Adoxdxhrszef Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2023, operating hours: 506 h, functionality: fully functional, machine/vehicle number: G3790-0043, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, feed length Z-axis: 700 mm, bar passage: 51 mm, Equipment: rotational speed infinitely variable, 1. CNC turning machine with a 12-position tool turret, capable of simultaneously controlling up to 8 spindles for 2 systems. 2. Enables single-setup machining. 3. Powerful, integrated spindle motor. 4. Robust BMT turret. 5. Multitasking capabilities can be achieved by adding a Y-axis to the upper turret (TTSY specifications). 6. Integrated machining through synchronized control of the main and counter-spindle. 7. Construction with hybrid guides: a combination of box guides (XY-axis) and linear guides (Z-axis). Rsdpfxezd D Nus Adzocf