Used Hydraulic Punch for sale (15,765)

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm Bledpfx Aehrakvea Uod throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. Blsdpfx Aaohlnznj Ued - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: used, Electro Hydraulic Scissor Fork Lift Pallet Truck Scissors lift truck, pallet lift truck TOYOTA / BT type HTH 10 E serial no. 481795 year of manufacture 2005 lifting capacity 1000 kg lifting height max. 800 mm overall height lowered 85 mm Fork length 1190 mm - electric lift via 12 volt battery - manual lift via hand lever as for lift truck Blsdpfxeg D H Ive Aa Usd - TOYOTA Industrial Equipment Europe SARL (Made in France) - long stroke hydraulic cylinder - with single roller - integrated charger (mains voltage 230 Volt, with cold appliance plug) own weight 140 kg good condition

Condition: used, Hydraulic power unit with hydraulic pump RACINE / VICKERS Hydraulic power unit Operating pressure: max. 44 bar Volume flow: 13 litres/min. Tank capacity: 40 litres Engine speed: 950 rpm Engine power: 0,75 kW Mains connection: 380 Volt, 50 Hz - 1 piece hydraulic vane pump PVQ-PSS=-06CR-J11 - Hydraulic tank with maintenance cover and oil level sight glass - 2 hydraulic hoses with 12L connections, length = 950 mm Bjdpfx Aajgprpne Ujld Space requirement L x W x H:: 700 x 400 x 750 mm Own weight: 97 kg (without oil content)

Condition: used, Hydraulic power unit with hydraulic pump BOSCH REXROTH / HYDRONORMA Hydraulic power unit year of construction approx. 1985 operating pressure: max. 65 bar volume flow: 20 litres/min. tank capacity: 110 litres Engine power: 3 kW Engine speed: 1440 rpm. Mains connection: 400 Volt, 50 Hz - 1 piece hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1 - 1 piece drive motor KATT, type FFN 100L - 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM - 1 piece return filter - 1 piece 4/2-way manual valve (e.g. for extending and retracting a double-acting hydraulic cylinder) Bledpfsgprpgjx Aa Ujd - Hydraulic tank with maintenance cover and oil level sight glass Space requirement L x W x H 900 x 550 x 1150 own weight: 142 kg good condition

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 pressure force 125 ton. throat 430 mm Bsdpfxefim Thj Aa Ueld table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. good condition

Condition: used, Single column eccentric press WEINGARTEN type ERV 40 Machine No. 537 / 65 Year of construction 1965 Compressive force 40 ton. throat 230 mm table size 570 x 470 mm ram surface 250 x 200 mm Bedpfjffm Hhjx Aa Ueld clamping spigot bore Ø 40 mm installation height max. approx. 520 mm stroke adjustment 8 - 88 mm slide adjustment travel 63 mm Stroke rate 70 strokes per minute Drive power 3 kW Mains connection 380 Volt, 50 Hz - Table height adjustment - Overload protection by crushing plate - clutch-brake combination by WEINGARTEN friction thread clutch - electric 2-hand operation and foot switch - central lubrication via hand pump space requirement L x W x H 1600 x 1150 x 2300 mm weight approx. 2,6 ton.

Condition: used, Hydraulically shiftable gearbox for changing rotation direction Hydraulic reversing gearbox from lathe Year of manufacture approx. 1985 Change gearbox for quick reversal of rotational direction to right or left - electric hydraulic pump for hydraulic pressure generation (380 Volt, 0.25 kW) - 2 solenoid valves for switching from right-hand to left-hand rotation - fitted with pulleys Ø 230 and 200 mm - was operated with a 15 kW drive motor, enables rapid change of direction with high torque transmission - drive motor always runs to the right, gearbox is hydraulically shifted to right, left or set to neutral without activation Overall dimensions L x W x H: 480 x 520 x 430 mm Weight: 170 kg Good condition Bsdpfxodz Sp Ds Aa Usld

Condition: used, Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 pcs. punching brackets, punching unit for press brake Year of manufacture approx. 1990 throat depth: 160 mm Punching capacity: 0.3 to 5 mm material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) A ø 5 mm round punching tool is installed Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brake Punching frame base plate dimensions L x W x H: 2500 x 345 x 37.5 mm Punching frame pressure plate dimensions L x W x H: 2500 x 173 x 20 mm Bedpfsdz Sp Hox Aa Ueld Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades Bledpfxorzfh Hs Aa Ujd - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Bljdpfx Aajr I E Itj Uod Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Bsdsdzp Trepfx Aa Ueld Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Bjdpfx Ajdzp Tcsa Ueld Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Spreading and pressing device with hydraulic unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader pliers, hydraulic spreader Blodpfx Aasdzp S Re Ujd Year of manufacture 1988 / 1986 Hydraulic unit type E45 / 59600.0 Maximum operating pressure: 630 bar Flow rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device - pliers WEBER type SP30 / 059 198.0 Reach (arm length): 340 mm Maximum spread distance: 810 mm Maximum spreading force in working range: 132 kN Closing force: 99 kN - Twin hose with quick-connect coupling Rated power: 0.9 kW Power supply: 220 Volt, 50 Hz Weight of hydraulic unit: approx. 40 kg Weight of spreader device: approx. 25 kg Very good condition Hydraulic rescue set for fire brigades with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart structures. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctional design of the spreader jaws, made of drop-forged and hardened steel.

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW Bledpfet Tqkdex Aa Ued weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Bljdpfxjxpuipe Aa Uod

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 130 mm Bsdoyi Acfspfx Aa Ujld -Piston rod: Ø 37 mm -Hole: Ø 30 mm -Pitch spacing: retracted 425 mm -Number: 2 cylinders available -Price: per piece -Dimensions: Ø 83 x 500 mm -Weight: 9.3 kg/pc.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir, mobile Blsdpfoyiz Nwex Aa Uod -Hydraulic pump: Pressure up to 140 bar -Flow rate: 12 l/min -Motor: Electric 2.2 kW / 1380 rpm -Pressure accumulator: 6.3 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 770/380/H810 mm -Weight: 110 kg

Condition: ready for operation (used), Year of construction: 1971, Immediately available from CH toolmaking plant: Eitel Hydraulic Straightening Press Type RRP 25 Year of manufacture: 1971 Pressing force: 25 tons Complete straightening equipment and accessories 2 extension tables right/left, each 3000 mm Hydraulic fine adjustment system Weight: 2,500 kg Bjdpfsyparqsx Aa Uold Price: EUR 2,000 plus VAT ex works

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Hydraulic double-column straightening press Dunkes Type HDSR 75 Year of manufacture: 1977 Blodpfx Aeypan Eoa Uod Pressing force: 165 t 3 cylinders, pressing force per cylinder: 75 / 65 / 25 t Table: 1500 x 500 mm Stroke: 350 mm Drive power: 3 / 15 kW Weight: 6 t Price: EUR 2,750— plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1992, Immediately available from site: Hydraulic press brake Piesok ESPE Model CTO 160/4000 Year of manufacture: 1992 Bending length: 4000 mm Pressing force: 160 t Drive power: 15 kW Large selection of tools included Bsdoyn U Udspfx Aa Uold Weight: 12 t Price: EUR 7,500—plus VAT, ex works

Condition: good (used), mileage: 538,104 km, power: 552 kW (750.51 HP), first registration: 08/2019, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,000 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, Year of construction: 2019, Equipment: AdBlue, air conditioning, central locking, electric window regulation, onboard computer, parking heater, = Additional Options and Accessories = - Rear work lights - Front work lights - Heated mirrors - Windshield - Cab - Tipping hydraulics - PTO - Sleeper cab - Auxiliary heater - Pre-heating automatic system = Remarks = Blodpfx Aasx H Iitj Ujd Volvo FH16.750 6x4 - PTO/Hydraulic - 3.00 WB - Full air - Work Remote MY: 27-8-2019 KM: 538104 YV2R0P0DXKA849946 PTO & hydraulic system Full air suspension 3.00 m wheelbase Low roof Work remote control = Further Information = Technical Information Number of cylinders: 6 gVW: 29,000 kg Transmission Gearbox: I-Shift, 12 speeds, automatic Axle Configuration Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steering; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Max. axle load: 10,500 kg; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Rear axle 2: Tire size: 315/80R22.5; Twin tires; Max. axle load: 10,500 kg; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Functional Body make: Volvo Condition Technical condition: Good Visual condition: Good More information Please contact VAEX The Truck Traders for further information.

Condition: good (used), mileage: 499,000 km, power: 397 kW (539.77 HP), first registration: 03/2021, fuel type: diesel, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 500 l, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: AdBlue, = Additional options and accessories = - Tipping hydraulics - PTO (Power Take-Off) = Further information = Transmission: I-SHIFT, automatic Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 9,602 kg Payload: 19,398 kg Gross vehicle weight: 29,000 kg Body manufacturer: VOLVO Technical condition: good Bledpfxjx Sxnks Aa Ued Visual condition: good VOLVO FH 540 6X4 Tractor Unit EURO 6 L PACKAGE, 460 HP DRIVE: 6X4 AIR SUSPENSION WHEELBASE: 320 CM FH CAB OPTIONS: - AIR CONDITIONING (CLIMA) - NAVIGATION SYSTEM - REFRIGERATOR I-SHIFT AUTOMATIC TRANSMISSION LED LIGHTS HYDRAULIC CONNECTIONS LARGE DIESEL TANK: 500 LITERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: good (used), mileage: 515,555 km, power: 397 kW (539.77 HP), first registration: 03/2021, fuel type: diesel, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 500 l, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 7,120 mm, total width: 2,540 mm, Year of construction: 2021, Equipment: AdBlue, = Additional options and accessories = - Tipping hydraulics - PTO (Power Take-Off) = Further information = Transmission: I-SHIFT, automatic Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 9,602 kg Payload: 19,398 kg Gross vehicle weight: 29,000 kg Body manufacturer: VOLVO Technical condition: good Visual condition: good VOLVO FH 540 6X4 Tractor Unit EURO 6 L PACKAGE, 460 HP DRIVE: 6X4 AIR SUSPENSION WHEELBASE: 320 CM Bledpfx Aexz Abkea Uod FH CAB OPTIONS: - AIR CONDITIONING (CLIMA) - NAVIGATION SYSTEM - REFRIGERATOR I-SHIFT AUTOMATIC TRANSMISSION LED LIGHTS HYDRAULIC CONNECTIONS LARGE DIESEL TANK: 500 LITERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: excellent (used), mileage: 1,028,872 km, power: 331 kW (450.03 HP), first registration: 05/2014, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 5,900 mm, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2014, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, fridge, power assisted steering, retarder, spoiler, = Additional options and equipment = - Roof spoiler - Tipping hydraulics - Air horn - PTO - Radio/CD player - Sleeper cab - Sideskirts Bsdpfxjyal Apj Aa Ueld - Sun visor - Pre-heating automatic system = Notes = TRANSPORT TO ANTWERP 390 EURO = Further information = Front axle: Tyre size: 385/65 R22.5; Steered; Suspension: parabolic springs Rear axle: Tyre size: 315/80 R22.5; Twin tyres; Suspension: air suspension Unladen weight: 7,932 kg Technical condition: very good Visual condition: very good Reference number: 65