Used Hydraulic Pump 200 Bar for sale (61,215)

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit -Manufacturer: Orsta, universal unit -Engine: 2.2 kW/1410 rpm Nodpfov Auxuex Aa Ejdf -Nominal pressure max.: 160 bar -Liter output: 2.5 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 750/380/H620 mm -Weight: 110 kg

Condition: used, functionality: fully functional, Pressure: 10 bar Capacity: 80 - 250 m³/h (1,333 - 4,167 l/h) Motor: 30 kW 50 Hz - 400/690 V - IP55 S1 2,900 rpm Ndsdpfx Aex H S Dhsa Eef

Year of construction: 2000, condition: good (used), 3-jaw wedge bar chuckFabr.SMW Typ:HG 200 bj.ca.2000Bore 50mmFlansch Aufnahme Diameter 170mmWithout jaws,with chuck key.chuck in good condition. Njdpfx Aod Sym Aoa Ejdf

Condition: used, Hydraulic power unit with BOSCH REXROTH hydraulic pump Hydraulic power unit Operating pressure: max. 100 bar Flow rate: 12 liters/min at 0 bar Flow rate: 12 liters/min at 50 bar Flow rate: 2 liters/min at 100 bar Tank capacity: approx. 170 liters Motor speed: 1400 rpm Motor power: 2.2 kW Ndjdpfsxrgu Nsx Aa Esf Power supply: 380 Volt, 50 Hz - 1 unit BOSCH REXROTH vane pump, type 1PV2V3-40/12 RA01MC100A1 - Hydraulic tank with inspection cover and oil level sight glass - Tank dimensions (L / W / H): 900 x 540 x 450 mm Installation space required (L x W x H): 900 x 580 x 770 mm Net weight: 150 kg (without oil)

Condition: used, Year of construction: 2016, mileage: 83,431 km, power: 251 kW (341.26 HP), first registration: 08/2016, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 12/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, Internal vehicle number: G300446 German vehicle Available immediately at our yard in Kaufungen, Kassel More information from Luis Lucena VIAJET 6 R+L/H (Container volume 6m³) Additional camera for 6/7 m³ (maximum 2 units) Mounted on the left mirror for blind spot monitoring Cruise control for hydrostatic drive Silent version, sound insulation mats in the engine compartment RAL 2004 pure orange Drive hydrostat HS 2000 Power-enhanced blower Pneumatically operated hand suction unit on discharge flap, DN 200 with manual shut-off valve, water supply and standard suction pipe, approx. 1,000 mm long LED work lights for the hand suction or rear suction system Rear suction system (detachable) on discharge flap, suction width 2,500 mm, 2 suction nozzles (each 50 x 1,250 mm) with 2 suction hoses and 4 water jets Sweeping unit right side, 250 mm, hydraulically telescopic HD unit 70 l/200 bar at the rear, spray bar with 2x7 flat jet nozzles Road washing system mounted at the front under the bumper, with standard water pump Extension for HD unit with automatic hose reel and heavy-duty hand lance (15 m hose) Additional GRP water tank approx. 1,500 l for H-version in place of the 700 l tank Synthetic resin container interior coating (dirt collection chamber and exhaust area) Financing example: * Internal reference number: G300446 * Price: €94,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €1,486.29 * Residual value: €18,380.00 If you are interested in this offer or would like it tailored to your needs, please contact us (Mr. Enchev). We look forward to your call Errors excepted We are happy to take your used vehicle in part exchange. Ndodpfx Asx Iay Hsa Ejf Financing directly from our business is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 t - Max. working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder displacement: 1450 mm - Max. longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in delivery - Hydraulic power units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (cooler) cooling for hydraulics Ndodexrb Nbjpfx Aa Eef - Stroke cylinder integrated into the working table Rod Diameter: 25 mm - Stroke: 80 mm - Control via cylinder control or hydraulic unit (lever control) - 10 lift cylinders installed - Digital control with position measurement via encoder and pressure measurement with data output - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum up and down travel of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure adjustment - Piece counter - Pre-stop traverse with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time process parameters - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces suspended control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is by SIEMENS (S7-1200 series) - Siemens touchscreen LCD (9 inch) MTP900 installed in the control cabinet - Electrical devices from brands SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via LCD touchscreen - Modes (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved, with all parameters programmable for each recipe - Activation via wireless control - Features dual push-buttons for slow/fast cylinder travel, emergency stop button, and operation confirmation - Touch-sensitive safety edge at the bottom of the portal columns for safety - Control cabinet mounted on the bridge side wall - Anti-twist lock for the cylinder - Oil temperature displayed on LCD touchscreen - Overheating warning for hydraulic oil shown on LCD touchscreen - Filter contamination status displayed on LCD touchscreen - System errors displayed on LCD touchscreen - Press status information displayed on LCD touchscreen - Once oil temperature reaches 45°C, the air cooler starts to lower the oil temperature; machine operation stops above 65°C until it cools to operating temperature - Operating manual included - System meets all essential safety and health requirements as per CE regulations

Condition: good (used), Double hydraulic pump, oil pump, gear pump Ndodpfx Aajb A H H Nj Eef -Shaft mounting: Ø 21.5 mm -Number: 3x hydraulic pumps available -Price: per piece -Dimensions: 270/120/110 mm -Weight: 6.7 kg

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Ndedjhfwqzepfx Aa Ejf Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: used, Year of construction: 2017, operating hours: 19,782 h, functionality: unexamined, machine/vehicle number: 3869002, overall weight: 4,840 kg, motor manufacturer: ABB, volume flow: 36 m³/h, Equipment: type plate available, For sale: ALUP Kompressoren Allegro 200DW Technical Data: Manufacturer: ALUP Kompressoren GmbH Model: Allegro 200 DW Type: Industrial screw air compressor Pressure: 8 bar Capacity: 36 m³/min Voltage: 400 V Nodpfx Aoxy Sagea Esdf Frequency: 55 Hz Motor Power: 200 kW Motor Speed: 2983 rpm Serial Number: TRD128935 Production Date: 09/2017 Weight: 4840 kg Noise Level: 79 dB(A) Made in Germany

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Nsdpfxowva I He Aa Ejdf Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Year of construction: 1978, condition: ready for operation (used), An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement. Nodpfsx Aunfex Aa Esdf

Condition: good (used), Year of construction: 2021, functionality: fully functional, With the stretchMASTER 6000, you can straighten steel bars up to 6 meters in length. The processable cross-sections are: round steel 6 – 30 mm, flat steel 4 – 12 mm as well as 12 – 60 mm, and square steel 8 – 25 mm. Ndjdpfx Aaoxyxkrs Eef The machine can be inspected by appointment. Delivery is available at an additional charge.

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Herion, hydraulic unit type HY 1359 Ndjdownpugepfx Aa Ejf -Motor: VEM 3.0 kW -Pressure: up to 15 bar -Flow rate: 12 l/min -Valves: Herion S 6 VH 10G009 / MU2S6 HGZ -Hydraulic tank: with filter and temperature/level indicator -Tank capacity: 63 liters -Individual components: see photos -Dimensions: 735/445/H725 mm -Weight: 144 kg

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Njdpfxjhtaaqo Aa Ejdf Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Condition: new, pressure 200 t Njdsxabw Ijpfx Aa Ejdf stroke 300 mm table surface area 1900 x 440 mm column travel between the guideways 1900 mm working feed 5,0 mm/sec engine output 15,0 kW weight of the machine ca. 4.800 kg. range L-W-H 2.570 x 1.665 x 2.860 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: new, functionality: fully functional, Year of construction: 2014, New and unused Adjustable hydraulic pump Ndsdjw H Ad Eopfx Aa Ejf Manufacturer: Herrenknecht Type: AL A4VS0 250 LR2DY / 30R-V2B250U34 Pressure: 270 bar Power: 132 kW

Condition: used, Hydraulic power unit with BOSCH - REXROTH hydraulic pump Hydraulic unit Type: U 120 V4 0.18 No.: 983791 Year of manufacture: approx. 1975 Operating pressure: max. 40 bar Flow rate: 4 liters/min. Motor power: 0.18 kW Tank capacity: approx. 8 liters Power supply: 400 Volts, 50 Hz Nedpfexrgu Asx Aa Eodf - Gear pump - Pressure regulator - Return filter Required installation space L x W x H: 350 x 300 x 420 mm Net weight: 20 kg Good condition

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Racine Vickers, hydraulic unit type HY 1359 -Hydraulic pump: Racine Vickers PVQ PSSO 06ER 20 -Motor: Siemens 0.75 kW -Pressure: up to 40 bar -Flow rate: 12 l/min -Hydraulic tank: with level indicator Ndedswnpdnopfx Aa Ejf -Tank capacity: 40 liters -Individual components: see photos -Dimensions: 660/375/H590 mm -Weight: 105 kg

Condition: used, Hydraulic power unit, hydraulic aggregate with double pump (tandem pump), hydraulic unit. Presumably made by an Italian manufacturer. Type: PF1/1-2.8/2.8 Year of manufacture: approx. 2000 Operating pressure: 50 bar, max. 100 bar Flow rate: 2 x 4 liters/minute (2 pumps) Tank capacity: approx. 25 liters Motor power: 1.5 kW Mains connection: 220 Volt, 50 Hz. • Double pump, tandem hydraulic pump, type PF1/1-2.8/2.8 131DBV601 • 1 return filter • 2 pressure gauges • Tank dimensions (L/W/H): 320 x 300 x 290 mm • Pressure port hydraulic pump fittings: 10L • Required installation space (L x W x H): 600 x 400 x 600 mm • Net weight: approx. 70 kg In very good condition. Nodpfxjxrgt Sj Aa Eedf

Condition: good (used), Year of construction: 1978, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos Nodownn U Espfx Aa Ejdf -Dimensions: 700/400/H710 mm -Weight: 125 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, center mower lifting cylinder Nsdegv Dikepfx Aa Eodf -Hydraulic cylinder: stroke 200 mm -Piston rod: Ø 23 mm / thread Ø22 x 50 mm -Mounting: Ø20 x 32 mm -Cylinder: outside Ø 62 mm -Dimensions: 770/70/H62 mm -Weight: 7.2 kg

Condition: good (used), Year of construction: 2011, Mono pump, dosing pump, high pressure pump, water pump, screw pump, eccentric screw pump, hopper pump, eccentric spindle pump -Connection: DN80 -E-Motor: North 3.0 kW -Gearbox: Nord SK25-100LA/4 TF Njdpfoffk Inex Aa Ejdf -Speed: 105 rpm -Price: per piece -Quantity: 3 pieces -Dimensions: 1810/200/H300 mm -Weight: 107 kg/piece

Condition: excellent (used), Hydraulic pump, oil pump, gear pump -Pumps: are unused -Contents: approx. 20 l -Electric: 24 V 3 KW -Working pressure: 140 bar -Number: 13x pumps available -Price: per piece -Dimensions: 900/175/H210 mm -Weight: 24 kg Ndedpfx Ajcgqdaoa Ejf

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: N365 OMP 200 151-0615 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 2x aggregate available -Price: per piece -Dimensions: 210/130/H120 mm Ndedpjxl Rzgefx Aa Esf -Weight: 7.1 kg/piece

Condition: good (used), Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 -Shaft: conical Ø 14-17 mm Nsdpfx Asvviggea Esdf -Flange: Ø 80 mm -Number: 4x pumps available -Price: per piece -Dimensions: 225/90/H120 mm -Weight: 5.6 kg/piece