Used Hydraulic Part for sale (28,708)

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment Dkjdpfjumpq Nsx Adheu - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: used, High-lift pallet truck - pedestrian stacker, tiller stacker KENTRUCK Type Ergo-H Serial No. Year of manufacture: 2001 Load capacity: 800 kg Lift height: 900 mm Fork length: 1170 mm Fork width: 70 mm Entry height at base of mast: 90 mm Overall fork width (outside): 570 mm Width between forks: 425 mm Distance between load rollers: 275 mm Lifting travel per pump stroke: 15 and 45 mm - Lift travel is manually switchable at the hand pump lever Dedpfx Asxcbmnsdhsku - Hand lever pump operates like a conventional pallet truck, lifting movement via the pull tiller - 2 steering wheels Ø 150 mm made of polyamide, 1 with parking brake, forced steering via the pull tiller - 2 fork rollers Ø 80 mm made of polyamide Dimensions (L x W x H): 1700 x 780 x 1370 mm Net weight: 150 kg Good condition

Condition: used, Hydraulic Power Unit ORSTA Year of manufacture: 1987 With 3 motors and various hydraulic circuits Tank capacity: 160 litres Pump power: 5.5 kW - 2 units of pressure accumulator, 160 bar, 25 litres each - 1 electric pressure switch - 7 units of 4/2-way hydraulic valve with solenoid coil Dsdpfsxcitpox Adheku - 5 units of 4/2-way hydraulic valve with solenoid coils - Oil cooling with water cooler and electric pump for internal water circuit Dimensions (L x W x H): 1300 x 750 x 1700 mm Weight: approx. 400 kg Offered without oil content

Condition: excellent (used), Catalog number: 7502 TECHNICAL DATA Infeed carriage DTBC-P Wheelbase 750mm Diameter of the infeed material 100-800mm Total side travel 160mm Log rotation to the left and right 360 degrees Forward and reverse travel speed variable Hydraulic pump motor power 5.5kW Auxiliary carriage DTCB Wheelbase 750mm Side travel range 160mm Log rotation to the left and right 360 degrees Side travel motor power 1.1kW Infeed carriage dimensions (L/W/H) 2850/1400/1500mm Auxiliary carriage dimensions (L/W/H) 950/650/750mm Dkjdpfx Aozrnxvsdheu Total weight 1450kg ADVANTAGES – Made in Poland – Robust construction – Includes cables and chains – Used machine, very good condition, after a major overhaul (invoice available for inspection) PRODUCT FEATURES The auxiliary carriage is designed to support logs or stacks from the infeed side of the saw, with a diameter range of 100 mm to 750 mm. The infeed carriage is designed to feed logs and stacks to the saws, with a diameter range of 100 mm to 750 mm. The device for manipulating logs, namely for clamping the log in the clamps, performing transverse movement, and rotating the log, is powered by hydraulic drives. Net price: 59900 PLN Net price: 13930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to identify the product. We only resell products that the manufacturer has previously introduced to the market. We have no business ties with the manufacturer.

Condition: excellent (used), I sell a Lukas baler in very good condition. Dkjdpfx Asum Htzedhou

Condition: good (used), I will sell a heavy-duty, hydraulically adjustable transport trolley. Price is for 1 pc. Dedpfxev Uinbo Adhoku

Condition: good (used), I am selling a HILMA-ROEMHELD machine vice, good condition. Djdpfjv Upvrsx Adheku

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Dkodjyw Ua Tjpfx Adheu Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: - Scissor lift - Hydraulic power unit - Controls (remote) 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: excellent (used), I am offering a professional LUKAS LZR 12/550 hydraulic rescue cylinder, used by fire brigades and in technical rescue operations. This equipment is from the renowned German brand LUKAS, designed for rescue work during road accidents and technical operations – very robust and durable construction. Condition: The item is used. Normal signs of use are visible (scuffs, worn label – see photos). Technical condition is unknown – sold as untested / for inspection. Technical data (from markings): Model: LZR 12/550 Manufacturer: LUKAS (Germany) Type: hydraulic cylinder / spreader Application: technical rescue, hydraulic power Equipped with working tips Set includes: LUKAS LZR 12/550 hydraulic cylinder Mounting element as shown in the photos Dsdjyxtabepfx Adheku Applications: Fire brigades (voluntary and state) Road rescue operations Technical and maintenance work Can also be used in hydraulic power applications.

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Manufacturer: CEMBRE Model: B35-50D Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Dkjdpfxsy H Rdgj Adhsu Fully functional Normal signs of use Ready for work

Condition: excellent (used), For sale: professional, battery-powered hydraulic crimping tool, Cembre brand, model B15D. The devices are in perfect working order and ready for use. The price is for one unit. The visual condition is as shown in the photos – normal signs of wear and tear from use. Technical specifications: Manufacturer: Cembre Model: B15D Crimping force: 15 kN Power supply: 9.6V / 2.0Ah Ni-MH Professional tool for crimping terminals and connectors Compact and robust design Additional information: Batteries have been refurbished – expiry date 05.2026 Charger not included Dedpey Uzcvefx Adhsku Crimping tools are 100% functional Sold individually Included in the set: Cembre B15D crimping tool Battery

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. Dkjdpfx Aozlaqksdhju The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: * RÖHM KFD-HS 200/3 lathe chuck, * 3 standard jaws, * 3 RÖHM 538-55 top jaws, * operating wrench, * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: * Manufacturer: RÖHM * Model: KFD-HS 200/3 * Diameter: 200 mm * Type: hydraulic 3-jaw lathe chuck * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Djdszucxcjpfx Adhoku Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: excellent (used), For sale: a functional, tested set of two Rexroth hydraulic pumps. The pumps are combined into a single unit and equipped with control elements and Rexroth valves. The unit shows signs of use, as visible in the photos. The sale includes the complete unit shown in the photographs. Markings read from the nameplates: Component Designation / Number Rexroth pumps SY2DFE1-11/071-071/... +00908620 Pump material number 00908632 Part number on the nameplates 21559404 01 Serial number of the first pump 1714777 Serial number of the second pump 1766280 Year of manufacture on the pump nameplates A038 Rexroth valves STW 0063-14/24V Valve material number 00905187 Additional number on the valves 21539727 01 Designation on the valves A035 Dksdpfxjz Ezvxj Adheu

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Dksdjzwylxepfx Adhsu Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: used, Year of construction: 2022, sheet length: 3040sheet thickness: 13,0total power requirements: 30weight approx.: 13,4messurements (LxWxH): 3850 x 2300 x 2260CNC Guillotine Shear DENER AS 3013 – Young Machine Ex Works – including loading onto truck For sale is a very young CNC guillotine shear DENER  AS 3013. The machine is in very good condition and is being sold due to a factory closure. The price already includes: - Loading onto truck - Immediate availability by arrangement (Location St. Pölten)  The machine can be inspected  by prior appointment. If you are interested or have any questions, please do not hesitate to contact us. Technical Data Sheet thickness: 13 mm Cutting length: 3,040 mm Cutting angle: 0.5–3° Number of hold-downs: 16 Back gauge: 1,000 mm, CNC-controlled Motor power: 30 kW Cutting speed (0.5–3°): 17–8 cuts/min Throat depth: 350 mm Dksdpfx Aezw Rv Ujdheu Oil tank: 400 litres Length: 3,850 mm Width: 2,350 / 3,270 mm Height: 2,260 mm Weight: 13,400 kg Equipment- Swing beam design - CNC control for:- Back gauge - Cutting angle - Cutting gap - Cutting length - Ball screws for the back gauge - Ball transfers in the table - 2 × support arms, 1,000 mm - Cutting line illumination - Foldable finger guard up to 1,000 mm Including pneumatic sheet metal support system!

Condition: used, Year of construction: 2000, sheet length: 4100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000Stroke/min: 8 Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible Dkjdpezd H U Hefx Adhou - Upper blade 2-fold reversible Additional Details: -

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Dkjdpfsy D U Dfjx Adhju Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6,5 mm distance between columns 3100 mm 1000 mm Cutting length variabel mm cutting gap adjustment variabel mm connected load 12,0 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 3,5 x 2,2 x 1,8 m Hydraulic guillotine shear with - cutting length adjustment - cutting angle adjustment - support arms - squaring arm - rear enclosure - mobile material bin Dedpjz Dky Refx Adheku

Year of construction: 2022, condition: new, Press hydraulic 6 six meters automat for fingerjointing line lignum Press hydraulic 6 six meters automat for fingerjointing line lignum Second hand 2022 Make: Press hydraulic 6 six meters automat for fingerjointing line lignum Model: Press hydraulic 6 six meters automat for fingerjointing line lignum Description: press hydraulic 6 six meters automat for fingerjointing line lignum .iNPUT TRANSPORT band output automat proces .More infomation plese send for mail Year: Dkjdpfx Aeimwx Eedhou 2022

Condition: good (used), functionality: fully functional, overall weight: 955 kg, type of input current: three-phase, input voltage: 400 V, manual hydraulic sealant applicatior for SILICONE power : 4 Kw Dodjz Ahtuspfx Adhsku

Condition: good (used), Year of construction: 2007, frame press GOMA PHA 3500 Door Press hydraulic Location Gorzów Wlkp. Conditions of delivery OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Dkjdpfjdntc Nex Adhsu Comments Working space 3500 x 2300 mm 1000kG (daN) pressure, engine at hydraulic unit 2,2 kW lenght 3500 mm hight 2300 mm weight 2000 kg agrageate hydraulic

Condition: excellent (used), functionality: fully functional, pressing force: 160 t, table width: 1,600 mm, table height: 2,000 mm, Equipment: documentation/manual, KAEV Hydraulic Cutting System Available Complete KAEV hydraulic cutting system, originally used for die cutting acoustic composites and laminated automotive parts. 1. Hydraulic beam cutting press Dkjdpfjz E S Iljx Adhju Four-column press with double-balanced yoke, self-lubricating bushings, column covers and two hydraulic cylinders integrated into the frame. The two-stage hydraulic pump provides fast approach and a slower, high-power cutting stroke. Hydraulic unit capacity: up to 300 litres; oil included. Features include automatic die-finding to set the lowest cutting point and infinitely adjustable return stroke. The control cabinet has a touch-screen panel and OMRON PLC, with scope for extensions and additional equipment. Standard software includes error indication, modem for internet connection, setup/manual/automatic modes and German/English interface. Protective covers and safety photocells are fitted. Technical data: • Cutting force: 160 t / 1,600 kN • Table/beam: 2,000 × 1,600 mm • Table height: approx. 950 mm • Daylight: 200 mm • Adjustable stroke: 15–180 mm • Stroke speed: 51 mm/s • Pump motor: 22 kW or 18 kW • Max. cutting oil pressure: 314 bar • Weight: approx. 16,000 kg 2. Pneumatic clamping beam feeder Rear-mounted feeder with one travelling beam pair for feeding material under the press and one pair for pulling and holding material. Feeding is driven by toothed belts and a frequency-controlled geared motor. The servo-driven pulling beams hold material securely and can reposition it backwards to a programmed position. PLC-controlled electro-pneumatic cabinet. Feed length is set at the touch-screen panel. Material is supported by a belt; the feeding area by a steel plate. Technical data: • Clamping width: 2,000 mm • Max. feed length: 1,600 mm • Beam opening: 60 mm • Beam speed: up to 800 mm/s, adjustable • Feed accuracy: ±1 mm • Pull-off force: 200 kp 3. Cutting pad shuttle unit The cutting pad moves in sync with material feeding to the front of the press, allowing convenient removal of cut parts. A linear drive and frequency-controlled geared motor move the shuttle frame. An automatic pad-shifting system connected to the cutting block changes the cutting position within a defined area, reducing repeated cuts in the same spot and extending pad life. A horizontal safety light curtain (approx. 1,200 mm) stops movement if the operator enters the shuttle area.

Condition: excellent (used), Wegoma edge banding machine with infeed/outfeed roller table and accessories. Hardly used. Djdpfx Aez Hvz Sodhoku

Condition: new, pressure 60 t stroke 400 mm daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l Dsdpfx Asgg Nn Sedheku feed down 6,1 mm/sec feed up 10 mm/sec Motor output 2,2 kW weight of the machine ca. 0,675 t dimensions of the machine ca. 1,2 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking