Used Hurlimann Xt 909 for sale (24,940)

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC850™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 85 cm and a 250-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC850™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC850™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: Hfedpfsu Srrhox Ag Ueb - Rotating basket with a diameter of 85 cm - Heated tank with a capacity of 250 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 180 kg - External dimensions - Open chamber (W x D x H): 135 x 110 x 195 cm - External dimensions - Closed chamber (W x D x H): 135 x 110 x 140 cm - Rotating basket diameter: 85 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 250 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set - Suitable for single wall pipes up to 220mm Hedjua E H Sjpfx Ag Uefb

Year of construction: 2015, condition: excellent (used), Machine for electro-chemical deburring incl. automation, washing system for removing the electrolyte from the parts surface and filtration unit. Hsdpfxslgzbne Ag Usfb SALE IN EU / SWITZERLAND / UK ONLY.

Year of construction: 2021, operating hours: 220 h, condition: like new (used), functionality: fully functional, machine/vehicle number: B144, HIGH MOISTURE EXTRUSION (HME) Extruder Hfsdpfjx Ac Utjx Ag Uob HME is able to create structured, palatable and nutritious products. Possible industries: - Plant-based Food (Clean label products with great texture) - Pet Food Industry (Wet Pet Food Production, Functional treats and chews, Alternative Protein incorporation) - Aquaculture Feed Industry (Structured aquafeeds, Nutrient Enhancement) - Nutritional supplement and medical foods (High-Protein Supplements) - Snack and convenience foods (High-Protein snacks, Meat-Free Meal Kits) - Sustainable and Alternative Protein Products (Insect and Algae Protein Texturization, Upcycled Food Products) The package includes: • High-quality Clextral HME Extruder • Additional equipment enabling faster start of production Reason for sale: We tried with the project in Plant-based industry in Slovenia and stopped the project in Jan. 2025. Machine was bought at the end of 2021, started operating in H1 of 2022 and worked for only 220 hours. Attached you can find a document with key information about the machine and additional equipment. The machine is in excellent condition ("like new"), used for only 220 hours and meticulously maintained – guaranteeing flawless operation and immediate usability after installation. A catalogue of plant-based products we have manufactured is also included. If you are interested in HME extrusion, we invite you to explore the technical documentation, photos, and VIDEO content available upon request.

Condition: ready for operation (used), Universal external top support Plate Roller External top support to support plates during rolling. It is only the top support without the rolling machine itself. Capacity: 3000mm x 8mm. The machine is mobile and foldable. The height adjustment is by means of an electrically driven spindle on 400V. It is not attached to the roller so very versatile. Location: Hamont-Achel, Belgium Transport possible at more price See also our other ads Also throughout the year we are looking for industrial machines. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Universelle external obere Stützplattenrolle External obere Stütze zur Unterstützung der Platten während des Rollens. Es betrifft nur die obere Stütze ohne die Walzmaschine selbst. Kapazität: 3000 mm x 8 mm. Die Maschine ist mobil und klappbar. Die Höhenverstellung erfolgt mittels eine elektrisch angetriebene Spindel mit 400V. Da es nicht an der Walze befestigt ist, ist es sehr vielseitig einsetzbar. Standort: Hamont-Achel, Belgium Transport gegen Aufpreis möglich Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Hedpfxevil Hce Ag Ujfb Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer Universal external top support Plate roller External top support to support plates during rolling. It only concerns the top support without the rolling machine itself. Capacity: 3000mm x 8mm. The machine is mobile and foldable. The height adjustment is by means of an electrically driven spindle on 400V. It is not attached to the roller so can be used in a wide range of applications. Location: Hamont-Achel, Belgium Transport possible at an additional cost Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. The seller is not liable for typing or data transfer errors. The machine is in terms of appearance, technology and wear and tear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT

Year of construction: 2007, condition: excellent (used), EXTRUDEX EXTRUDER EN50-30D year 2007 no. 4101264, with melt pump, screen changer and 5 layer pipe head Year of manufacture 2007 As well as 4 co-extruders EXTRUDEX EN25-25D, year of manufacture 2007 APPLICATION: Production of PE 5 layer pipes Max diameter 32 mm INVENTORY: 1 single-screw main extruder EN 50 Hfjdevyaxuopfx Ag Ujb 4 co-extruders single-screw auxiliary extruders The extrusion system is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Condition: new, Year of construction: 2025, total width: 2,100 mm, total length: 1,260 mm, total height: 2,150 mm, A high-quality device for the regeneration of DPF/FAP/GPF/SCR/EURO 5/EURO 6 filters and catalytic converters. Constructed entirely from stainless steel (AISI 304) and acid-resistant steel (AISI 316), suitable for all types of vehicles. The machine is equipped with a 275-liter tank, a high-pressure pump with a capacity up to 250 l/min, and an integrated filter drying system. Hjdpfxsgllkas Ag Usfb The Master Flash technology utilizes the full benefits of the hydrodynamic method, restoring filter efficiency up to 99.9% compared to the new one. It is completely safe for the monolithic structure of DPF filters. Properly adjusted parameters ensure that PM10, PM2.5 particles, soot, carbon deposits, oil, cerium oxides, and heavy metals are thoroughly removed, maintaining the filter's factory characteristics. The pump with chemical sealing and electronics based on components from leading European manufacturers guarantee the highest quality and reliability. The machine is equipped with a filter contamination measurement system (backpressure measurement) and an integrated filter drying system with a temperature range of 70 to 130 degrees Celsius. The filtration system, expanded with a pre-cleaning filter, significantly extends the lifespan of the main filters. Master Flash technology, combined with the unique XPOWER DPF CLEANER chemistry, effectively removes PM10, PM2.5 particles, carbon deposits, oil, cerium, and heavy metals without mechanical interference with the filter structure, restoring its factory performance to 99.9%. TECHNICAL SPECIFICATIONS: * Weight: 650 kg * External dimensions (H x W x D): 215 x 210 x 126 cm * Chamber dimensions (H x W x D): 107 x 140 x 89 cm * Tank capacity: 275 l * Operating pressure: 6 - 8 bar (90 - 100 psi) * Voltage: 3 x 400V * Max power: 12 kW * Frequency: 50 Hz * Water inlet connection: 1/2” * Water outlet connection: 6/4” * Air connection: pneumatic quick coupling DN 7.2, plug * Ambient temperature: 5 - 35°C EQUIPMENT: • High-quality components • 7” color touchscreen • Sensors: liquid level, liquid and air temperature, pressure flow, door opening, phase loss, and phase sequence • Filter contamination measurement system • Chamber made of stainless steel AISI 316 • Extended 4-stage liquid filtration system • Two heaters • Integrated drying system with a temperature range from 70 to 130°C • Drying system cooling • Integrated thermal printer for filter parameter printouts • Ethernet controller for remote diagnostics • Set of connection adapters for DPF/FAP/GPF/CAT/SCR filters • EURO5 and EURO6 adapter • Starter kit of consumables (complete set of filters + 2L XPOWER DPF Cleaner detergent) • Extended 12-month manufacturer warranty (optional 24 or 36 months) AVAILABLE IN VARIOUS CONFIGURATIONS - CONTACT US FOR MORE INFORMATION.

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: M1042, Technical characteristics: # Working chamber: 980 × 860 × 900 mm (W × H × D) # Working table height: 935 mm # Mechanical weight: 1900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Installed capacity: 30 kVA # Generator output: 450 A / 43 V DC (pulse technology included) Dimensions # Machine Dimensions (L×W×H): 2100 × 2000 × 2600 mm; Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) Dosing unit for electrolyte stabilization # Control system: Siemens HMI – User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling needs: up to 12 signals # Safety features: Light curtain or sliding door for operator protection Hfodpjxx Nkysfx Ag Usb # Process monitoring: Real-time data tracking and short-circuit detection Machine status: WORKING # Safety light barrier – needs replacement

Condition: refurbished (used), Attachment shredder for mobile EXTEC screening machine Hsdou Dhkdepfx Ag Ujfb e.g. for EXTEC 5000S, Turbo, Turbotrac, S-Series) for pre-shredding cohesive/clumpy material

Year of construction: 2017, condition: good (used), Used Xtrutech Extruder XTS 24 for sale. The extruder is fully functional and was used in the powder coating sector with many spare parts. Hfsdpfxjvcynue Ag Uob

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION Hsdpfx Aewivdksg Uofb

Condition: excellent (used), Year of construction: 2017, EXTRIM 260 , Year 2017 Reliable and fast electric trimmer with a self-sharpening circular rotating blade for flexible materials. Designed to improve your productivity every day with great precision and speed. It cuts materials up to 1,8mm (0,07 in.) in thickness and its cutting speed is adjustable up to 100 m/min. (328 ft/min.). Electrical trimming machine designed to improve your productivity every day with great precision and speed. It cuts material up to 1,8mm (0,07 in.) in thickness. Adjustable cutting speed up to 100 m/min. (328 ft/min.) Innovative “Accu View” cutting system that allows choosing between two working modes: the first one ensures maximum speed, the second one guarantees absolute accuracy. Unique trimmer on the market thanks to its cutting unit mounted on a linear recirculating ball bearing system for long lasting operations Hedpfxsvvtbho Ag Uofb useful LED illuminating system to make the cutting easier. Solid construction to satisfy high performance over time. Frame on wheels, easy to be moved around and space saving. SUITABLE MATERIALS : Paper. Cardboard. Polyester film. PVC banner (up to 900 gr/m2 - 27 oz./ya2). Digital printing supports. Laminated prints. Polycarbonate film. Polypropylene PP-film (up to 1,2 mm - 0,04 in.). Reflective film. Canvas & TNT. Magnetic rubber. Price under request

Condition: new, Year of construction: 2025, overall weight: 230 kg, water tank capacity: 110 l, Workshop Cabin Washer, constructed from stainless steel AISI 304 and acid-resistant steel AISI 316, designed for professional use in various industries and automotive applications. It is used to remove heavy dirt without damaging the surface of the cleaned element. Operates in a closed-loop system at temperatures up to 45°C. The working table width is 150 cm. The washer is equipped with a 110-liter tank that can be optionally thermally insulated to prevent the heated fluid from cooling too quickly. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, combined with the appropriate temperature and pressure from the spray gun nozzle, effortlessly removes all kinds of dirt. Standard equipment includes a high-pressure lance up to 140 bar, a compressed air gun, and a low-pressure overflow brush. The washer chamber is pneumatically lifted, with adjustable height, bright lighting, and air ventilation for the window to ensure user convenience. The design and construction of the Master Cleaner MC 1500 adhere to the highest quality standards, ISO 9001, and environmental protection standards, ISO 14001. It is ideal for removing dirt from steel, cast iron, and aluminum surfaces. The Master Cleaner MC1500 is equipped with a dedicated oil separator that effectively removes oil contaminants from the water in the washer’s tank. EQUIPMENT: - High-pressure nozzle: 140 bar - Low-pressure brush: up to 5 L/min - Compressed air gun: up to 8 bar - Air ventilation for the viewing window - LED lighting - Pneumatic chamber opening mechanism - Heated 110-liter tank - Dual liquid filtration system - Oil separator - Liquid level and temperature sensors - Adjustable height feet: up to 100 mm - Dual foot switch - XPOWER Active Cleaner (5L starter pack) OPTIONAL FEATURES: - Rotating basket - Spray arm - Rotary nozzle - Manifold cleaning nozzle - Thermal insulation for the tank TECHNICAL SPECIFICATIONS: - Weight: 230 kg Hfedpfjri Rn Usx Ag Usb - External dimensions - Open chamber (W x D x H): 175 x 85 x 235 cm - External dimensions - Closed chamber (W x D x H): 175 x 85 x 170 cm - Chamber dimensions (W x D x H): 150 x 64 x 65 cm - Heated fluid tank: 110 liters - Operating temperature: up to 45°C - Power supply: 3 x 400 V - Pneumatic power supply: 6 - 8 bar - Maximum power: 7.5 kW - Operating pump pressure: 140 bar - Dual liquid filtration system: Yes - High-pressure lance capacity: up to 15 L/min - Air connection: Pneumatic quick coupling DN7.2 plug - Manual washing with overflow brush: up to 5 L/min - Dual foot switch: Yes - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE MULTIPLE MODELS AVAILABLE - CONTACT US TO LEARN MORE.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, lifting height: 6,000 mm, load capacity: 5,000 kg, lifting speed: 50 mm/s, power: 4.5 kW (6.12 HP), input voltage: 400 V, input frequency: 50 Hz, wire rope hoist Konecranes CXT400 5000kg emag.6m bridge crane trolley, hoist, crane Hedpfx Ajxpphmog Usfb single girder bridge crane mounted 5 ton crane trolley for sale Manufacturer: Konecranes CXT400 Year of manufacture 2004/11 Load capacity: 5000 kg Working height: 6 m Type: CXT40410050P35FBL0F Date of manufacture: 29.01.2001 Lifting speed: Fast: 5.0 m/min Slow: 0.8 m/min Side travel speed: Fast: 20 m/min Slow: 5 m/min Voltage: 400v 50Hz Drive: 4.5/0.7kw Controller: 48V

Condition: used, Year of construction: 2016, Used labeling machine AXTRA 720-H9SA4 up to 8000 bph General configuration and operational performance The used labeling machine AXTRA 720-H9SA4 up to 8000 bph delivers high-performance inline labeling for glass containers and, upon request, handles PET or other packaging materials. This fully overhauled labeling machine ensures reliable and precise operation in industrial environments that demand consistent labeling quality. Specifically, the AXTRA 720-H9-SA4 model reaches speeds of up to 8000 containers per hour, depending on sample confirmation by the customer. Operating direction and functional layout The machine operates in a clockwise direction, with containers entering from the left and exiting to the right when facing the conveyor. Therefore, this configuration supports integration into most standard bottling lines used in modern production facilities. Moreover, operators can easily align the layout with existing upstream and downstream equipment. Labeling system and reel handling The used labeling machine AXTRA 720-H9SA4 up to 8000 bph includes three non-stop labeling stations designed for 400 mm reels and one standard station for 300 mm reels. In addition, each station features sensors that accurately detect opaque labels, ensuring precise placement even with low-transparency materials. As a result, the system delivers consistent labeling quality across multiple formats. The machine can work within the following measurements, with a diameter of 45÷115mm and the heigth of 180÷330mm. Precision mechanics and integrated adjustments The machine uses electromechanical plates to guarantee high precision during operation. Furthermore, it features an electric vertical adjustment system for the upper carousel, allowing operators to perform fast format changes with minimal downtime. In fact, this automation improves productivity and reduces manual intervention. The system also includes a pre-installed optical centering system, which ensures accurate alignment on containers with printed reference marks. Consequently, the machine maintains high visual consistency during label application. Additionally, the machine supports continuous production with 9 active plates, which maintain consistent output and reduce interruptions. Compatible materials and reconfiguration options The machine currently labels glass containers, but our team can modify it to handle PET or other materials upon request. Similarly, we can adapt the system to different container shapes and label types. The existing setup applies front, back, and neck labels, while the fourth station supports additional applications, such as tamper-evident seals or promotional labeling. Therefore, users can reconfigure the machine to meet varied market or client-specific needs. Hedpew Az Diofx Ag Uofb Combination of new and used components Our team rebuilt the machine using a combination of used and new parts. The used components date back to 2016; however, we replaced many critical elements with new parts during the overhaul.

Year of construction: 2011, condition: ready for operation (used), Various laboratory devices are available for quality testing in the textile industry. 1) Textile tensile tester Textechno FPA ME, year of manufacture: 2000, max. speed of pull-off clamp: 5000mm/min, clamping dimensions X/Y: 46mm/10mm, clamping pressure 3bar/5bar/8bar: 1200N/2000N/3200N, max. clamping distance: 960mm, force transducer: E 10N/E100N/E1000N, accuracy: +/-1%, machine dimensions X/Y/Z: approx. 885mm/700mm/1730mm, weight: approx. 200kg, control: Textechno Bus. 2) Illuminated table White Screen Normlight, lighting: 3x 36W, machine dimensions X/Y/Z: approx. 1250mm/800mm/850mm. 3) Textile length measuring machine Yuan More YG086, year of manufacture: 2011, measurement: linear yarn density, yarn count: 1-6, frame circumference: 1000mm (+/-1mm), frame speed min./max.: 30r/270r/min, max. yarn frame turns: 9999, yarn traverse stroke: 35mm (+/-0.5mm), single yarn tension range: 0cN-100cN, machine dimensions X/Y/Z: approx. 850mm/680mm/550mm, weight: approx. 50kg. 4) Digital microscope Di-Li. 5) Light box Just color Viewing Light. 6) Cardwinder Graf & Co CCW15. Documentation available. On-site inspection is possible. Hfedpfx Ageuanrwe Uob

Condition: new, Year of construction: 2025, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder - Büchele SFB-100 high-pressure unit Maximum machining diameter: 12 / 20 / 32 mm Maximum machining length: 160 / 210 mm Axes: 7 + Y1 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for the machine supply and control at 200 V / 50 Hz, and chip conveyor designed for Nexturn machines with machine tank. Modular system, all driven tools by WTO, Made in Germany. Including long part extraction unit. Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and sub-spindle Hodpevyzp Iofx Ag Uefb Main and sub-spindle collet type: standard Synchronously driven guide bush unit Guide bush type: standard Standard equipment tool holders Linear slides 5-position tool holder for 16x16mm shank tools 4 cross drilling units ER16 Drilling fixture for front / rear face machining, with 5 ER16 drilling spindles Sub-spindle for rear machining Rear machining with 4 machining stations ER16 Drive unit for tools for rear machining on 2 fixed and 2 driven stations Pneumatic workpiece ejector Workpiece ejection monitor Blow-out device for sub-spindle Workpiece receiver Workpiece conveyor for part removal Separate coolant tank with level and flow monitoring Machine prepared for high-pressure coolant systems (electrical and mechanical adaptation up to 100 bar) Coolant through sub-spindle Automatic central lubrication with level monitoring Toolbox with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot USB interface RJ-45 LAN interface RS 232 C interface Control functions in standard specification: 8 MB program storage Metric input Direct input of drawing dimensions 200 tool wear offsets Operating hours display Part counter Network connectivity Background machining Automatic power-off function Program execution controllable via handwheel High-speed skip function for probe use Spindle speed monitoring (G25 - G26) Thread turning with variable pitch (G34) Cylindrical thread cutting (G35 - G36) Tool radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and sub-spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation / phase control of main and sub-spindle (M56 - M57) 4 additional programmable M-codes

Condition: used, Separation wall 2000 x 2200 with 3 levels of filtration, filtration area 2000 x 1000. Hjdpfx Agovuqg Se Uefb Working area 1 meter deep with recessed lighting IP65, and a table for storage. Fan NEXT 211 1.1 kW ATEX explosion-proof, max 4500 m3/h mounted on top of the wall. Starter start/stop, and duct connection unit with shock absorber to the outside. Stand is good. Can be viewed in Vilnius. If you have more questions, we will be happy to answer.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: R95-0839, Extrude Hone Vector Precision Deburring and Polishing System, Model 8/6. Hjdpfxsryv Ixe Ag Ujfb Capable of polishing large extrusion and forming dies, deburring and polishing precision parts in small to medium batch quantities. Worktable height 46.5", column spacing 28". Maximum opening 22.75", minimum opening 2.75". Media tube diameter 8". Media tube displacement 628.3". Media extrusion pressure 197-844 psi. Media delivery rate 0-2.53 cubic inches per minute. Hydraulic camping force 22.0-29.4 tons. Includes a 5 hp power pack, and an operator panel SPECIFICATIONS: Year: 1995 Serial No. R95-0839 Media Cylinder Diameter…………8″ Media Cylinder Capacity…………628.3 cu.in. Hydraulic Ram Diameter…………6″ Hydraulic Clamping Force…………29.4 Ton Opening Between Tooling Plates – Maximum…………10″ Worktable Height…………46-1/2″ Distance Between Columns…………24″ Compressed Air Required…………58 PSI Media Extrusion Pressure…………197 – 844 PSI Media Delivery Rate…………0 – 2,053 cu.in./min. Electrics…………230-460V/3Ph/60Hz Dimensions – Approximate Overall when Closed…………41″(L) x 51″(W) x 106″(H) Weight – Approximate…………5,000 Lbs. EQUIPPED WITH: Allen Bradley Programmable Logic Controller (PLC) 20 HP Hydraulic Power Pack Unit Media Displacement & Cycle Timer Counters

Condition: used, functionality: fully functional, power: 1.5 kW (2.04 HP), rotational speed (max.): 28 rpm, input voltage: 400 V, input frequency: 500 Hz, type of input current: three-phase, type of cooling: air, Electric variator electric motor 1.5kW 0-28 rpm Hedpfxsud Id Ij Ag Usfb Manufacturer: SIEMENS Type: 1 LA9090-2WA91-Z Power: 1.50kw IP54 Voltage: 50Hz 220/380 V Current consumption: 5.60/3.20 A Revolution: 2900/min Weight: 50 kg Gearbox Manufacturer: SIEMENS Type: FKSD 712 B3 P1 Output revolution: 0-28 1/min

Condition: reconditioned (used), Year of construction: 2003, Special complete plant for exceptionally hard and abrasive stone Primary crusher set baxter double effect 50x36 inches. New jaws. Electric motors Revised the whole set in workshop, perfect condition. Hedpfxoim D Uue Ag Uofb Vibrating pre-screen feeder. 1400x6000 mm Hopper with capacity for 40 m3 Mounted on bolted metal structure, Gyratory crushers Svedala 16-45 Asteca screen 2500x6000 mm 3 floors Conveyor belts etc.

Year of construction: 2009, condition: as good as new (ex-display), functionality: fully functional, Mobile cutting and work table for processing almost all board materials, cement fiber and cement chipboard, etc. Suitable starting materials: plasterboard; MDF boards; OSB boards; plastic; wood; cement fiber and cement chipboard, etc. Hfjdpfswcxanjx Ag Usb Areas of application: plasterboard walls, ceilings and other structures; dry, mortar-free structures; interior structures; acoustic structures; wooden structures; facade structures; exhibition structures; stage structures, etc.

Condition: new, Year of construction: 2025, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder - Büchele SFB-100 high-pressure coolant unit Maximum machining diameter: 12 / 20 / 32 mm Maximum machining length: 160 / 210 mm Axes: 7 + Y1 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for power supply to the machine and control with 200 V / 50 Hz, and chip conveyor designed for Nexturn machines with machine tank Modular system, all driven tools are manufactured by WTO, Made in Germany includes long parts discharge unit Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and sub spindle Main and sub spindle collet type standard Synchronously driven guide bushing unit Guide bushing type: standard Standard equipment tool holder Linear slides 5-position tool holder for shank 16x16mm 4 cross drilling units ER16 Drilling unit for front/rear face machining with 5 drilling spindles ER16 Sub spindle for backworking Backworking with 4 machining stations ER16 Drive unit for backworking tools: 2 fixed stations and 2 driven stations Pneumatic workpiece ejection device Part ejection control Blow-off unit for sub spindle Workpiece receiver Workpiece conveyor for discharging workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adaptation up to 100 bar) Coolant through sub spindle Automatic central lubrication with level monitoring Toolbox with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot USB interface RJ-45 LAN interface RS 232 C interface Control features included in standard scope: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear offsets Operating hours display Hfjdpfjvyzqfex Ag Uob Workpiece counter Network connectivity Background machining Automatic power-off function Program execution via handwheel High-speed skip function for use of probes Spindle speed monitoring (G25 - G26) Thread cutting with variable pitch (G34) Helical thread cutting (G35 - G36) Cutter radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate transformation (G68.1 - G69.1) Multiple repeat cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and sub spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and sub spindle (M56 - M57) 4 additional free M codes

Condition: ready for operation (used), Asahi - Seiki Manufacturing Co. Ltd. NSF-10 for producing extension / extended springs with english or german loops for wire diameters up to 1mm. Machine in very good condition, possible to buy with decoiler and setted for some springs. Hodpfor Izikjx Ag Ujfb

Condition: excellent (used), functionality: fully functional, Enhanced finishing solution for metal 3D printed components EXTRUDE HONE technology opens the door to a very economical, fast, controllable, flexible, and environmentally friendly process for enhanced surface finishing of metal 3D-printed parts. We have a used machine in stock for immediate delivery. This machine has only been used briefly and is in excellent condition. FEATURES and BENEFITS + Efficiency in enhanced surface finishing. Material removal rate (μm/min) faster than other methods on the market; e. g. up to 3 times faster than electro-polishing. + Tooling out of the printer. Tooling and fixtures are built at a reasonable cost since they are 3D-printed. + Highest flexibility. We provide a complete & optimized cathode and fixture design for your components within two working days. Hfedpfxjv Awrwo Ag Uob + Multiple material master packages Specific parameter files per alloy family. + EXTRUDE HONE Connect From CAD to part, remotely: loading of parameters, upgrading material packages, software, and maintenance. + Make it easy. The all-new and simple operating concept limits the data input to 4 simple parameters – parameters everybody understands.