Used Hot Water High Pressure Cleaner for sale (45,629)

Condition: used, digital gauge Digibar Crjdpfjcf Rb Tox Afljh is suitable for measuring static and quasi-static fluid and gas pressures. PE 100 is the battery version.

Condition: used, Pressure watertight tie point, formwork accessories, KRASO tie point Credpfx Ajb Eu S Ijflsh -monolithic connection of the vulcanized KRASO locking disc -easy installation -No assembly on site -easy closing of the clamping point -no time-consuming gluing of the plugs -no wage-intensive rework -absolutely watertight clamping point -Inside and OUTSIDE pressure water-tight tested -from company liquidation -Total length: 300 mm -1 mesh box approx. 350 pieces -Weight: including box 142 kg

Year of construction: 2022, condition: new, Kairos Engineering's energy recovery system is a technology that recovers the heat contained in the industrial hot wastewater, to transfer it to other water to be put back into the production process. The transfer takes place by means of shell and tube heat exchangers in which the two fluids, which never meet directly in order not to undergo contamination, they are sent against the current, that is, one against the other. Indicative savings of 30%. Crsdpfeh Akv Hsx Aflsh

Condition: used, Year of construction: 2007, max. plate size 625 x 550 mm Credpfevfxi Nsx Afloh max. speed plates 30 /h resolution of impression max. 2540 dpi Violet Laser incl. Rip

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Crodsxhfl Eepfx Afljh Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: used, Year of construction: 2017, operating hours: 49,000 h, functionality: fully functional, machine/vehicle number: 170015, Nitrogen generator model number Nitro -Gen 250. This generator is in operation and running 24 hours 5/6 days a week, it is in excellent condition and routinely serviced. It produces nitrogen gas at 99.5 to 99.9% purity with a flow rate of 40/55 M3/hour for packing food to MAP. requirements. Flow rate varies depending on the purity of Nitrogen required. Credoxbta Dspfx Afloh It is estimated it will have a higher flow capacity than that quoted, but in it's present location is sufficient to supply our 4 production lines. There are also 2 buffer/storage tanks included as shown. In addition there is a 11Kw compressor that supplies the generator- if required. With the buffer tanks and compressor[if required] this is a complete working Nitrogen generation system. Operation & installation Manual available. Documents -PDF with rating of this 250 model relative to different purity level settings The machine is for sale only due to expansion of the business resulting in additional new production lines requiring higher capacity equipment.

Condition: used, axle configuration: 3 axles, first registration: 01/2008, color: other, Year of construction: 2008, Unladen weight: 6,800 kg Payload: 32,200 kg Csdpfoxgynxox Aflsrh Gross vehicle weight (GVW): 39,000 kg Damage: none

Condition: good (used), axle configuration: 3 axles, loading space length: 8,170 mm, loading space width: 2,440 mm, first registration: 04/2010, suspension: air, tire size: 385/65-R22.5, Year of construction: 2010, Equipment: ABS, = Additional Options and Equipment = - ADR - BPW axles - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Remarks = 2010 TURBO'S HOET 20FT/30FT galvanized ADR chassis, BPW Eco-Plus axles with disc brakes, ABS/EBS, ADR (FL, AT) valid until 16.05.2025, 5x ALCOA rims (rear right = steel rim), 1st axle = lift axle, unladen weight: 3,870 kg, maximum gross weight: 39,000 kg, 385/65-R22.5 tires (L: 5/6/3 mm; R: 7/2/2 mm), Belgian registration with valid technical inspection until: 16.05.2025 = Further Information = Axle configuration Tyre size: 385/65-R22.5 Brakes: disc brakes Suspension: air suspension Rear axle 1: alloy rims; lift axle; max. axle load: 9,000 kg; axle make: BPW Eco-Plus; left tyre tread: 35%; right tyre tread: 45% Rear axle 2: alloy rims; max. axle load: 9,000 kg; axle make: BPW Eco-Plus; left tyre tread: 40%; right tyre tread: 15% Cedpfxov Aakij Aflerh Rear axle 3: alloy rims; max. axle load: 9,000 kg; axle make: BPW; left tyre tread: 20%; right tyre tread: 15% Dimensions Dimensions (L x W x H): 940 x 248 x 135 cm Weights Unladen weight: 3,870 kg Payload: 35,130 kg Gross vehicle weight: 39,000 kg Functional Body make: TURBO'S HOET OC/3AT/39/03BSRM Condition Technical condition: good Visual condition: good Further Information Please contact Piet Swank for further details.

Condition: like new (used), Baktec water Dosing machine and chiller In good working condition for more information please sent an request Cedpsump Axefx Aflorh

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Speed continuously variable from 0 - 1.7 rpm. Length 1250mm, width 1550mm, height 940mm Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Credpfxjv A Rppj Aflsh Hollow shaft or hole 110mm

Condition: used, Nordson Problue Hot Melt Pump Model - Problue 10 Facility to connect up to 6 hoses 10kg Tank Capacity Cjdpfx Afowq Suujlorh

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours Cedpjxgumcsfx Aflorh - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: used, axle configuration: > 3 axles, first registration: 01/2024, suspension: steel, color: other, Year of construction: 2024, Suspension: leaf suspension Crsdjxgyh Ejpfx Afloh Damage: none

Condition: good (used), axle configuration: 3 axles, loading space length: 8,170 mm, loading space width: 2,440 mm, first registration: 05/2008, suspension: air, tire size: 385/65-R22.5, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Remarks = 2008 TURBO'S HOET 20FT/30FT ADR swap chassis, SAF axles with disc brakes (INTRADISC), ABS/EBS, ADR (FL, AT, OX) valid until 30.05.2025, 1st axle = lift axle, unladen weight: 3,720 kg, max. gross weight: 39,000 kg, 385/65-R22.5 tyres (L: 2/12/6 mm; R: 8/14/11 mm), Belgian registration = Further Information = Axle Configuration Tyre size: 385/65-R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 15%; Tyre tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 75%; Tyre tread right: 90% Cedpfx Aev Aakpjfljrh Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 70% Dimensions Dimensions (L x W x H): 940 x 248 x 135 cm Weights Unladen weight: 3,720 kg Payload: 35,280 kg Gross vehicle weight: 39,000 kg Functionality Body manufacturer: TURBO'S HOET OC/3AT/39/03BSRM Condition Technical condition: good Visual condition: good Further Information Please contact Piet Swank for more information.

Condition: good (used), axle configuration: 2 axles, first registration: 11/2005, suspension: air, color: blue, Year of construction: 2005, Equipment: ABS, Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Weights Empty weight: 2.750 kg Carrying capacity: 27.250 kg GVW: 30.000 kg Maintenance, history and condition APK (MOT): tested until 03/2026 Technical condition: good Visual appearance: good Additional information Please contact Pedro or Arie for more information Cedpfx Aew Smwfjflerh

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, A completely new and unique joint kinematics with spatially arranged articulated arms results in the following advantages: Codpfx Afewau Ucoljrh • Tilting (0…90°) and rotating (endlessly) products of any shape around themselves!*) • Ergonomic, space-saving, and efficient handling of the component • Integration into existing work/assembly areas due to minimal space requirements • Mobile and tilt-proof due to movement and positioning of the workpiece close to its center of gravity • Minimal drive power of the low-noise electric drives (230V) • Permanently stable work/assembly positions thanks to holding brakes • Extremely clean operation – no leaks • Drastic reduction in work/assembly time • Reduction in handling accidents and the associated costly downtime thanks to one-time, safe adaptation during the entire processing process. • Increased employee motivation • Integration into line/cyclic assembly processes possible (Industry 4.0)

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Codpfx Aowuqfysfljrh Mounting brackets included In excellent working condition

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units Cjdpexgua Ajfx Aflorh 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: used, axle configuration: 3 axles, first registration: 07/2020, suspension: air, color: other, tire size: 385/65 R22.5, Year of construction: 2020, Axle configuration Refenmaß: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread left: 20%; Tire tread right: 20% Rear axle 2: Tire profile left: 10%; Tire profile right: 10% Rear axle 3: Tire profile left: 10%; Tire profile right: 10% Weights Unladen weight: 5,940 kg Payload: 32,060 kg GVW: 38,000 kg Condition Damage: none Cjdpfx Asxgybfjflorh

Condition: used, Nordson Problue 7 Hot Melt Pump Model Problue 7 Crjdpfewq S Eyjx Afleh

Condition: used, axle configuration: 3 axles, first registration: 11/2020, suspension: air, color: other, tire size: 385/65 R22.5, Year of construction: 2020, Axle configuration Credpfxjxgx H To Afljh Refenmaß: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread left: 10%; Tire tread right: 10% Rear axle 2: Tire profile left: 15%; Tire profile right: 15% Rear axle 3: Tire profile left: 20%; Tire profile right: 20% Weights Unladen weight: 5,940 kg Payload: 32,060 kg GVW: 38,000 kg Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 03/2023, suspension: air, color: other, Year of construction: 2023, Axle brand: BPW Brakes: Disc brakes Rear axle 1: Steered Rear axle 2: Suspension: Air suspension Rear axle 3: Suspension: Air suspension Credpfexgx Hyox Afloh Damage: None

Condition: used, axle configuration: 3 axles, first registration: 07/2020, suspension: air, color: other, tire size: 385/65 R22.5, Year of construction: 2020, Axle configuration Csdpfxexgxkre Aflsrh Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Reference dimension: 385/65 R22.5; Tire tread left: 10%; Tire tread right: 10% Rear axle 2: Refenmaß: 385/55 R22.5; Tire profile left: 15%; Tire profile right: 15% Rear axle 3: Reference dimension: 385/55 R22.5; Tire tread left: 45%; Tire tread right: 45% Weights Unladen weight: 5,940 kg Payload: 32,060 kg GVW: 38,000 kg Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 10/2008, suspension: air, color: other, tire size: 385/55 R22.5, Year of construction: 2008, Axle configuration Tyre size: 385/55 R22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 8 mm; Tyre tread right: 8 mm Rear axle 2: Tyre tread left: 6 mm; Tyre tread right: 6 mm Rear axle 3: Tyre tread left: 6 mm; Tyre tread right: 8 mm Csdpfxoxgw Ebs Aflorh Weights Unladen weight: 8,460 kg Payload: 30,540 kg Gross vehicle weight: 39,000 kg Condition Damage: none

Condition: new, axle configuration: 3 axles, suspension: air, color: other, tire size: 385/65 R22.5, Year of construction: 2023, Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Credpfov A Tx Hsx Aflsh Suspension: Air suspension Rear axle 1: Left tire profile: 100%; Right tire profile: 100% Rear axle 2: Left tire profile: 100%; Right tire profile: 100% Rear axle 3: Left tire profile: 100%; Right tire profile: 100% Damage: None