Used Horizontal Milling for sale (14,652)

Condition: used, HANEX 17D SWISS TYPE LATHE MAKE HANEX, MADE IN KOREA MODEL 17 D YEAR 1997 CONTROL FANUC OT-CD MAX MACHINING LENGTH 210.0 mm MAX MACHINING DIA 17.0 mm MAX DRILLING DIA 7.0 mm SPINDLE RANGE 200 – 8,000 rpm SPINDLE MOTOR 1.1/3.7 kW SUB-SPINDLE 200 - 4000 rpm TOOL CAPACITY FOR OD MACHINING 8 TOOLS FOR ID MACHINING 3 TOOLS FOR BACK-END MACHINING 2 TOOLS SLIDE TRAVEL X AXIS: 32.0 mm Z AXIS: 210.0 mm T1, T2=105.0 mm B AXIS: 113.0 mm MACHINE DIMS 1500 x 980 x 1500 mm MACHINE WEIGHT 1050 KGS PLUS 3000.0 mm FULL LENGTH MAGAZINE BARFEED Gedpfx Aswidy Tofiskd RANGE OF TOOL HOLDERS RANGE OF COLLETS SET OF MANUALS

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven Gkedpfjw Rn Eusx Afijd ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Serial No: 3669 ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Serial No: 8293 ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Serial No: KM 765 ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, Makino MCD1516-5XA 5 Axis Twin Pallet Horizontal Machining Centre With Makino Professional 3 Control Gksdpsxv Aapefx Afied Pallet Dimension 1,000 x 1,000mm (5 'T' Slots). Maximum Pallet Load 2,000kg. Axis Travel 'X'=1,500mm, 'Y'=1,600mm, 'Z'=1,200mm, 'A'= +10°/-100°, 'C'=360°. Rapid Traverse 'X'=12m/min, 'Y'=12m/min, 'Z'=12m/min, 'A'=1 To 360°/min, 'C'=1 To 360°/min. Maximum Cutting Feed 'X'=8,000mm/min, 'Y'=8,000mm/min, 'Z'=8,000mm/min, 'A'=1 To 360°/min, 'C'=1 To 360°/min. Distance From Spindle Centre To Pallet Top -680 To 920mm. Distance From Spindle End To Pallet Centre -500 To 1,100mm. Spindle Speed Range 10-4,000rpm (22kW Motor). Spindle Taper ISO 50. 120 Position ATC. Maximum Tool Ø300mm, Maximum Tool Length 750mm, Maximum Tool Weight 30kg. S/No. 97. NOTE - See Lot Description for Important Information on Final Bids and Equipment Collection. With Hydroflow Coolant Filtration System (Tank Capacity 3,000Litres), Dual Auger Conveyors To Hydroflow Chip Conveyor, Kanto Seiki MPSD-38--N Oil Chiller, Dual Filtermist FX6200 Mist Extraction Units, 2 Renishaw Spindle Inspection Probes, Quantity Of Toolholders & Tooling, Manuals & Rotary Spin Window. Machine Weight 35,000kg. Note: Needs New Spindle Amplifier Module A06B-6102-H230#520 & Power Supply Module A06B-6087--H130, Cable & Pipe Rack Needs Attention. BIDDING NOTE: All Top Closing Bids received either through Auction or via Make Offer function will be presented to Rolls Royce for final approval. Buyers will be notified by email and/or by Invoice if their bid is successful. COLLECTION NOTE: Due to Rolls Royce Company Policy, ONLY Approved Removal Contractors are Permitted to Operate on this Site. Please See Collection Details for Contact Information.

Condition: used, Used Comi Condor type HX/GMP 316L stainless steel Atex rated horizontal peeler centrifuge. Unit has 1150mm diameter perforated basket. Maximum speed 1,400 rpm with load 280kgs and maximum cake capacity 222 litre. Internal rated +0.5/-0.5 bar design pressure at 50 deg.c. Unit has main drive, hydraulic powerpack, mounting springs and (2) control cabinets. Gksdpfx Aoxt Ef Aefijd Specifications: Basket Volume / Capacity: 58.7 gal Basket Diameter: 45.3" Material Of Construction: Stainless Steel Speed Of Basket: 1400 Type Of Drive: main drive, hydraulic powerpack Type Of Enclosure: Atex rated

Condition: excellent (used), Danobat CP11.11 Horizontal Bandsaw Year 2009 Serial Number 0909901302 Max Size 1100mm x 1100mm Additional Features Year 2009 Variable Speed Front & Rear Tables Total Power 16kw Total Weight 10800kg Gkedpfexwk Idsx Afiod

Condition: used, Year of construction: 2007, Doosan ACE-HM630 Horizontal Twin Pallet Machining Centre. Serial No. HM630262 (08-2007) with Fanuc Series 18i-MB Control, Pallet Size, 630mm x 630mm, Travel X/Y/Z = 1000/800/850mm, Full B Axis, 40 Position ATC, Spindle Taper ISO50, High Pressure Coolant, Filtermist Gedpfoxvz Ufex Afiekd Location: These lots are located in Middlesborough, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, DOOSAN S390L CNC LATHE MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T SWING OVER BED 580 mm MAX TURNING DIA 390 mm DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 SPINDLE SPEED 3500 RPM SPINDLE MOTOR 30 HP TURRET 12 STATIONS, RAPIDS X: 24m/min Z: 30m/min TAILSTOCK YES MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS TOOL SETTING PROBE COOLANT SYSTEM Gkodpfxoxfa Ips Afisd TURRET TOOLING

Condition: good (used), Year of construction: 2007, Maximum cutting diameter 820mm, maximum cutting length 1500mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, Gkjdpfxou Rb Sns Afisd spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, swarf conveyor

Condition: good (used), Year of construction: 2007, Mori Seiki NL2000SY/500 CNC Twin Spindle Multitasking Lathe With DMG MSX-850III Control & LNS Quick Load Barfeeder Maximum Swing Over Bed Ø923.8mm. Maximum Swing Over Cross Slide Ø755mm Maximum Turning Ø356mm. Maximum Turning Length 510mm. Maximum Bar Capacity Ø65mm. Axis Travel 'X'=260mm, 'Z'=590mm, 'Y'=±50mm, 'C'=0.001°(Minimum Increment), 'B'=624mm. Main Spindle With Hainbuch Collet Chuck (Main Spindle), Maximum Spindle Speed 5,000rpm (15kW Motor), Spindle Nose A2-6. Sub Spindle With ATS Workholding Collet Chuck, Maximum Spindle Speed 6,000rpm (11kW Motor), Spindle Nose A2-5. 12 Position Turret (12 Positions Driven). Maximum Driven Tool Speed 6,000rpm (5.5kW Motor). LNS Quick Load Servo 80 Barfeeder Length 2,000mm. S/No. NL201GH2033 (2007). Gsdexvz T Uspfx Afiokd With 10bar Coolant System, Chip Conveyor, Workpiece Unloader, Workpiece Conveyor, 2 Renishaw RP3 Tool Setting Arms, Foot Switches, Daikin Inverter Oil Chiller, Filtermist FX4002 Mist Extraction Unit, Signal Tower, Bar Feeder Liners & Manuals. Overall Dimensions L2,6955 x W2,000 x H2,120mm. Weight 5,800kg.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, TAKISAWA TM-3000Y2 FANUC 0iTF PLUS. TOTALLY AS NEW. BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES. 8 INCH + 6 INCH STANDARD CHUCK SIZE WITH:- Y-AXIS TRAVEL +45 -45 MM - LOWER TURRET (Y2 AXIS) Y-AXIS TRAVEL +45 -45 MM - UPPER TURRET (Y1 AXIS) CHIP CONVEYOR RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF SYSTEM TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 6" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA B-206 RH SPINDLE 8" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-08) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU TOOL MONITORING SYSTEM 9 BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE - MULTI BAR MAGAZINE TYPE REMAINING BAR DISCHARGE DEVICE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AXIAL DRIVEN TH, ER25 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER25 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 1 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE - 4,500 RPM RIGHT HAND SPINDLE - 6,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (+ - 45 MM) LOWER TURRET Y2-AXIS (+ - 45 MM) 8” + 6” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Dia. 215 MM Maximum Turning Dia. 215 MM Maximum Turning Length 620 MM Bar Capacity Left Spindle Ø 65 MM Bar Capacity Right Spindle Ø 42 MM AXIS TRAVELS Upper Turret Travel X1 190 / 90 MM Upper Turret Travel Y1 90 (± 45) MM Upper Turret Travel Z1 660 MM Lower Turret Travel X2 190 / 90 MM Lower Turret Travel Y2 90 (± 45) MM Lower Turret Travel Z2 660 MM Travel A (RH Spindle) 660 MM LEFT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed (RPM) 4,500 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM RIGHT SPINDLE Chuck Size Ø (6”) 152 MM Spindle Speed 6,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-5 Spindle Bore Ø 53 MM Gjdpfxsxrpnre Afiekd TURRETS - UPPER & LOWER Number of Tools (Upper & Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Diameter 32 MM Milling Shank Diameter 16 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids X1 / Y1 / Z1 20 / 12 / 40 M / MIN Lower Turret Rapids X2 / Y2 / Z2 20 / 12 / 40 M / MIN Rapid Traverse Speed - A (Right Spindle) 40 M / MIN MOTORS Spindle Motor - LH 15.0 / 11.0 KW Spindle Motor - RH 11.0 / 7.5 KW Turret Driven Tool Spindle Motor 5.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 3.0 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 3.0 KW Axis Feed Motor - (A) 2.5 KW SUPPLY 35 KVA MACHINE L 4,254 MM W 2,460 MM H 2,230 MM 8,300 KGS

Condition: excellent (used), functionality: fully functional, TPS/Miller/Keyplant 6m Pipe Cladding Weld Overlay System Twin head with AVC Miller Maxstar 700 power sources Miller Maxstar DX 200 hot wire power sources New Heavy duty water cooling unit (Chiller) Gksdpfx Afju Hfkmoiod Heavy duty Hollow Bore Head Stock Pipe diameter clamping range 150mm-750mm

Condition: used, Year of construction: 2013, Doosan Puma 700L CNC Heavy Duty Lathe. Serial No. ML0158-001180 (11.2013) with Fanuc Series 32i-Model A Control, Max Swing 1030mm, Max Turning Diameter 900mm, Distance Between Centres 3200mm, 12 Station Turret, Kitagawa B24 24" 3-Jaw Chuck, 1400 rpm, Toolsetter, Tailstock, Manual Steady, Swarf Conveyor, Filtermist Gkedpfx Aoxvz Swsfisd Location: These lots are located in Middlesborough, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1997, MORI SEIKI SL-35 TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-35 YEAR 1997 CONTROL FANUC MSC 516 CHUCK DIA 400.0 mm MAX. TURNING DIA 400.0 mm MAX. TURNING LENGT 780.0 mm SWING OVER BED 600.0 mm OVER CROSS SLIDE 425.0 mm MAX. SPINDLE SPEED 9-2500 rpm TURRET 12 STATIONS Gsdpfx Afev N D Rtsijkd TAILSTOCK YES SPINDLE BORE 82.0 mm SPINDLE NOSE A8 RAPID TRAVERSE RATE X: 12,000mm/min & / Z: 15,000mm/min PLUS SWARF CONVEYOR TOOL SETTING PROBE GOOD RANGE OF TOOLING MACHINE MANUALS CLEAN

Condition: excellent (used), Year of construction: 2020, The Armor HV horizontal moulder includes all the features of the Armor Tradition model, but also is reinforced to keep higher daily rates. The included Tradition Pack will allow you to limit the degassing of your dough. Up to 1 800 pieces/h. Gkedpfxjwt Tnhe Afisd Dough pieces from 50g to 2000g. Retactable belt. Belt dimensions 700mm W x 29mm L

Condition: excellent (used), Year of construction: 2018, Doosan PUMA VTR 1620M CNC Vertical Turning Centre With Doosan FANUC i-Series Control Gkodpexvzzlofx Afied Maximum Swing Ø2,100mm. Maximum Turning Ø2,000mm. Recommended Turning Ø1,600mm. Maximum Turning Length 1,800mm. Maximum Table Load 10,000kg. Axis Travel 'X'=-800 To 1,000mm, 'Z'=1,200mm, 'W'=840mm (3 x 240mm Steps), 'C'=0.001° (Minimum Indexing Angle). Rapid Traverse 'X'=12m/min, 'Z'=10m/min. Ram Dimension 260 × 260mm. Spindle Speed 300 rpm. Spindle Motor Power 45/37kW. Spindle Torque 20,557Nm. Maximum Milling Tool Speed 3,000rpm. Ram Milling Tool Power 15kW (20 hp). Tool Turret Capacity 15 Tools. Maximum Turning Tool Length 500mm, Maximum Milling Tool Length 350mm, Turning Tool Shank 32 x 32mm, Boring Bar Sleeve Ø100mm. S/No. MT0055-000025 (2018/10) With Dual Chip Conveyors, Profluid High Pressure 0-70bar Coolant Filtration System, Losma Icarus Mist Extraction Unit, Kwangrim Oil Cooler, Hand Wheel, Signal Tower, Maintenance Access Ladder With Platform, Staging & Manuals. Machine Dimensions L6,500 × W4,240 × H6,303mm. Machine Weight 40,000kg. Note: No Tooling Included. Please note: Machine must be removed by Jan 2026.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: TJGP2065, TAKISAWA TM-4000Y2 FANUC 31i B2 - TOTALLY AS NEW BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES 10 INCH + 8 INCH STANDARD CHUCK SIZE. WITH:- Y-AXIS TRAVEL -50 +70 MM - UPPER TURRET (Y1 AXIS) Y-AXIS TRAVEL -50 +30 MM - LOWER TURRET (Y2 AXIS) CHIP CONVEYOR - RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE ABNORMAL LOAD DETECTION FUNCTION WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS Gjdoxrnwlopfx Afiekd 8" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA BR-08 RH SPINDLE 10" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-10) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU MONITORING SYSTEM BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE FOR MULTI BAR MAGAZINE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AI CONTOUR CONTROL II CHIP CONVEYOR UPGRADE (MORETECH JAPAN) AXIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE – 4,200 RPM RIGHT HAND SPINDLE - 5,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (- 50 + 70 MM) LOWER TURRET Y2-AXIS (- 50 + 30 MM) 10” + 8” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Diameter Ø 215 MM Maximum Turning Diameter Ø 215 MM Maximum Turning Length 800 MM Bar Capacity Left Spindle Ø 82 MM Bar Capacity Right Spindle Ø 65 MM AXIS TRAVELS Upper Turret Travel X1 230 / 120 MM Upper Turret Travel Y1 120 (- 50 + 70) MM Upper Turret Travel Z1 800 MM Lower Turret Travel X2 210 / 80 MM Lower Turret Travel Y2 80 (- 50 + 30) MM Lower Turret Travel Z2 800 MM Travel A (RH Spindle) 900 MM LEFT SPINDLE Chuck Size Ø (10”) 254 MM Spindle Speed (RPM) 4,200 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-8 Spindle Bore Ø 94 MM RIGHT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed 5,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM Inner Bearing Dia.120 TURRETS Number of Tools (Upper/Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Dia. 40 MM Milling Shank Diameter 20 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids- X1 / Y1 / Z1 20 / 12 / 30 M / MIN Lower Turret Rapids - X2 / Y2 / Z2 20 / 12 / 30 M / MIN Rapids on A (Right Spindle) 30 M / MIN MOTORS Spindle Motor - LH 18.5 / 15.0 KW Spindle Motor - RH 15.0 / 11.0 KW Turret Driven Tool Motor 7.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 2.5 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 2.5 KW SUPPLY 50 KVA MACHINE L 4,741 MM W 2,748 MM H 2,444 MM 9,370 KG

Condition: good (used), Year of construction: 2012, 750mm Swing, 500mm max. machining diameter, 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling Gkjdpfx Afexqyg Noisd 20kW, C axis 0.001 degrees, Y axis - 90/+120mm, 40 station ATC, , milling speed 4,000rpm, 30kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit.

Condition: used, Year of construction: 1992, travel distance X-axis: 12,300 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,250 mm, Butler LE5000 Elgamill 12m (X) x 3m (Y) x 1.25m (Z) CNC Horizontal Boring & Milling Machine, Tool changer, Fanuc 15M Control. YEAR 1992. 112766 Available with all the Tee slotted floor plates, angle plates listed below. 112767 2750mm x 1520 mm x 250mm Tee slotted Floor Plate 112768 2750mm x 1520 mm x 250mm Tee slotted Floor Plate 112769 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112770 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112771 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112772 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112773 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112774 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112775 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112776 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112777 6700mm x 1070mm x 880mm Surface Table Gkodpfx Aextf T Hsfisd 112778 600mm x 500mm 1800mm Angle Plate 112779 600mm x 500mm 1800mm Angle Plate 112780 600mm x 500mm 1800mm Angle Plate 112781 600mm x 500mm 1800mm Angle Plate 112782 910mm x 700mm x 1800mm Angle Plate 112783 840mm x 690mm x 3370mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112784 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112785 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112786 900mm x 600mm x 3000mm Angle Plate 112787 1020mm x 1010mm x 4280mm Angle Plate 112788 1830mm x 1220mm x 600mm box table tee slotted on two faces 112789 800mm x 750mm x 1190mm Angle Plate

Condition: ready for operation (used), Vermogen slijpsteen: 15 kWt Besturing: Siemens Sinumerik 840D Siemens drive: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1270 mm Grindingwidth: 610 mm Longitudinal travel X-axis (autom.): 1310 mm Cross-travel Y-axis (autom.): 565 mm Travel Z-axis (autom.): 470 mm Dimensions of the table: 1215 x 500 mm Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 400 x 100 x 127 mm Spindlespeeds: rpm Motorpower: 30 / 47 kWt Tension needed: 380V - 50Hz Cooling system: yes Gsdjxl Hxhspfx Afiekd

Year of construction: 1998, operating hours: 1,339 h, condition: ready for operation (used), Control Unit Brand FANUC Model Series 18i-T Main Drive Gsdpfx Afexv Ezcsijkd Number of axis 4 Spindle Speed 4000 RPM Tool taper VDI 30 This 4-axis SCHAUBLIN 65 TM-3 was manufactured in 1998. A robust horizontal turning machine, it features a maximum turning diameter of 380mm and a length of 534mm. With a spindle speed and rotating tool speed both up to 4,000 RPM, and a 12-piece turret with driven tools, consider the opportunity to buy this SCHAUBLIN 65 TM-3 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 1997, Soraluce SP10000 Travelling Column Table Type Milling Machine with Siemens Sinumerik CNC Control Gkjdsxvx S Ispfx Afijd Table Length Approx 10,000mm; Table Width Approx 1,100mm; Column Horizontal Travel 'X' Approx 8,500mm; Head Vertical Travel 'Y' Approx 1,600mm; Ram Cross Travel 'Z' Approx 1,200mm; (60) Station Automatic Tool Changer; (1) 1,000mm Dia., Integrated Horizontal/Vertical Rotary Table (8-T Slots) with 400mm Dia. 4-Jaw Chuck; Horizontal/Vertical Tool Change Facility; BT50 Spindle; 20-2,000 RPM; S/No. 108537. Operator Platform; Stand Alone Oil Filtration System; Urretzu Swarf Conveyor; Hine Lubrication System; (2) 10-Draw Tool Cabinets (1,100mm x 800mm x 1,100mm) including Assorted Machine Tooling Aids & Fixings; Overall Dimensions of Machine Approx 14,785mm x 4,770mm x 4,420mm High; Weight of Machine Approx 30,000kg.

Condition: ready for operation (used), Year of construction: 1999, Mazak Super Quickturn 200M (1999) C Axis and Milling 8" Chuck Cylinder Mazak tool length measuring system Full set of manuals Parts Catcher Tailstock Gksdpfxjw Rl Ugs Afisd Mazatrol & EIA programming Swarf Conveyor Bar feeder preparation No bar feeder included This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: used, Year of construction: 2001, Toyoda 'FH100 II' Twin Pallet Horizontal Machining Centre with Fanuc 16i-M CNC Control Gkedpfjxvx Rwjx Afijd X' Axis Approx 1,600mm, 'Y' Axis Approx 1,400mm, 'Z' Axis 1,100mm; Feed (X) Approx 950mm; (2) Pallets, 1050mm x 1050mm, Max Load 3,000kg; (120) Station ATC; Minimum Index angle 1°; Distance from Table Surface to Spindle Centre Approx 50mm-1,450mm; Distance from Table Centre to Spindle Nose 20mm-1,400mm; Geared Headstock; Max Tool Dia (Adjacent Pockets) 120mm; Max Tool Length 600mm, Max weight per Tool 35kg; Spindle Taper BT50; Spindle Speeds 10-6,000 RPM; S/No. 9224. Weight of Machine Approx 30,000kg; Floor Space Required Approx 4,565mm x 8,300mm; Stand Alone FSE Filtration System with Controls; MistMaster Extraction System; Access Platform; Shernidian Electric PS-111 Motor Starter; Handy Pulser Generator Hand Wheel.

Condition: good (used), Year of construction: 1999, operating hours: 1,887 h, functionality: fully functional, machine/vehicle number: 142031, spindle speed (max.): 5,000 rpm, Mazak Super Quickturn 200 (1999). Serial Number: 142031. Date: 1999. Weight: 5000kg/11,000lbs. Mazak tooleye measuring system. Tailstock. Swarf Conveyor. Parts Catcher. 12 Station Turret. Mazatrol PC-Fusion- CNC 640T control panel. Main Spindle Max 5000RPM. Collet Chucks and Collets. Hydrafeed barfeeder NOT included. Gsdpfotz A Dfsx Afiekd This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: excellent (used), Year of construction: 2023, 2023 Mazak Optiplex 4020 Fiber III 6kW Laser Processing Machine With Mazatrol Control Maximum Workpiece Dimension 4,000 x 2,000mm. Maximum Load Capacity 1,600kg. Maximum Material Thickness Mild Steel 25.4mm, Stainless Steel 25.4mm, Aluminium 19.05mm. Axis Travel 'X'=4,085mm, 'Y'=2,070mm, 'Z'=110mm. Rapid Traverse 'X & 'Y'=120m/min. Positioning Accuracy 'X & 'Y'=0.05mm Per 500mm, 'Z'=0.05mm Per 100mm. Repeatable Accuracy 'X & 'Y'=0.03mm. S/No. 310080 (2023). NOTE - Loading can not be done by the crane on site, buyer responsible to arrange for loading. Buyer will require a versa lift to load to their transport. With Donaldson DFPRE6 SPKTRP Dust Extraction Unit, IPG LC 170.01-A.3.5/6 Chiller Unit, Light Safety Curtains & Signal Tower. Overall Dimensions L10,744 x W4,049 x H2,010mm. Weight 21,200kg. Please note: Machine is currently under power, however it will be professionally decommissioned and moved to our storage facility for collection. Gjdexc H H Tspfx Afiekd