Used Holzkraft for sale (220)

Condition: good (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, input voltage: 400 V, noise level: 71 dB, extraction nozzle diameter: 125 mm, tank capacity: 165 l, Return device with slight signs of wear. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the Chip container due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminum-coated polyester fleece, resulting in a long service life Filter comes standard with an antistatic design, tested and approved according to category M-BIA The fan is installed downstream of the filter If a warranty is stated in the item description and/or in the description of the scope of delivery, this does not affect your statutory rights against your seller. Please refer to the warranty conditions for the scope, duration, contents, and the guarantor. We assume no liability for printing errors, mistakes, or incorrect representations. Technical and visual changes are reserved. Some images show optional accessories. Delivery is subject exclusively to our terms of delivery and payment. Sales are made through specialist retailers. Godpfx Adjwgz T Sjmjil

Condition: used, Used machine Year of manufacture: 2022 Gijdpfx Ajx Hbr Iodmol Equipment and technical specifications: - Working width: 950 mm - Also suitable for smaller craft businesses for occasional use - Combination sanding unit with sanding pad for fine sanding - Standard with diagonally grooved steel roller, Ø 120 mm, for calibration - Fine adjustment of working height - Clearly arranged control panel at the front - Robust monoblock steel machine frame with reinforced tubes, robot-welded, with high-mounted working units for maximum rigidity - Motorized table height adjustment with digital display - Electronically controlled sanding belt oscillation - Conveyor belt feed via gear motor with two speeds - Natural rubber feed belt with negative profile - Flexible steel pressure bar in front of the first unit - Rubber pressure rollers before and after each working unit - Pneumatic belt tensioning for each unit, with decimal correction option for grit/thickness - Versatile use for solid wood and veneer, thanks to the combination unit - Entry-level model for smaller companies - Combination unit for calibration and sanding: - Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment - Hard sanding pad with graphite backing - Universal version for calibration and sanding of solid wood, chipboard and veneer - Sanding pad on/off from the control panel - Roller on/off from the control panel - Electronic control system "FOX 500 KTR" - Table extension with 2 rollers at infeed and outfeed - Automatic table positioning with push button - Sanding belt length: 1525 mm - Sanding belt width: 970 mm - Maximum working width: 950 mm - Feed speed: 4.5 / 9 m/min - Workpiece height: 4 - 170 mm - Motor: 7.5 kW - Extraction port: 140 mm Dimensions: 1388 x 1545 x 1668 mm Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Condition: excellent (used), Year of construction: 2017, Holzkraft Bandsaw HBS 940 AS – Top Condition – Very Low Hours – DESCRIPTION - Heavy-duty design with high dead weight for maximum running smoothness - Especially quiet and precise operation thanks to a torsion-resistant machine frame - Cast iron flywheels with rubber coating and cleaning brush - 3-roller precision blade guides standard, above and below - Large grey cast iron saw table, tiltable from 0° to +15°, ground and polished surface - Large cast iron parallel fence with round bar guide, easily adjustable - Saw blade tension indicator - Precise cutting height adjustment via rack and pinion, with millimeter scale - Self-braking motor TECHNICAL DATA Dimensions and weight Length (product) approx. 1550 mm Width/depth (product) approx. 920 mm Height (product) approx. 2900 mm Weight (net) approx. 860 kg Dust extraction connection Extraction port diameter: 2 x 140 mm Work table(s) Table length: 1250 mm Table width: 800 mm Table height: 1060 mm Table tilt: 0 - 20° Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Output power: 5.5 kW Cutting range Max. cutting height at 90°: 560 mm Max. cutting width: 910 mm Bandsaw blade Blade speed: 1550 m/min Flywheel diameter: 940 mm Blade length: 6690 mm Min. blade length: 6630 mm Max. blade length: 6700 mm Min. blade thickness: 0.8 mm Max. blade thickness: 0.9 mm Blade guide: precision guide above and below Gsdpfxoxz Ulze Admeil Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Gedpfx Asxnlavjdmjil

Condition: used, Year of construction: 2025, The Holzkraft HSE 5-520 KH log splitter is designed for convenient and safe splitting of short logs for home or semi-professional use. Its compact design and easy operation enable efficient work even in tight spaces. Ideal for firewood preparation. Splitting force: 5 tons Splitting material length: max. 520 mm Gisdjwxc Diepfx Admjl Splitting material diameter: max. 250 mm drive: Electric 230 V mass: about 50 kg

Condition: used, Extraction unit Holzkraft ASA1103, good condition, standard equipment, 1.5 kW, 50 kg Gisdpfx Aox H Ugledmol Price subject to change, errors, misprints and typesetting mistakes excepted.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 17456, cutting length (max.): 3,200 mm, cutting width (max.): 1,270 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, overall weight: 1,000 kg, pivoting range: 45 °, power: 7 kW (9.52 HP), Equipment: motor brake, scorer, New machine built in 2021, serial number: Stable steel and gray cast iron construction With three speeds as standard With NC control with 7 inch LC display as standard for adjusting all axes of the machine Saw unit with permanently precise double swivel segment guide, 6-year Holzkraft guarantee on wear of the swivel segments Positioning of the cutting height and the saw blade swivel electrically Scoring unit with separate scoring motor Powerful industrial motors Smooth and precise format sliding carriage made of anodized aluminum with proven and permanently smooth ball contact system on hardened, 10-year guarantee on wear of the guideways Large support surfaces thanks to standard table extension and widening Gray cast iron saw table Fold-down parallel stop with fine adjustment and round bar guide Crosscut stop, extendable up to 3200 mm, with two folding stops and eccentric clamp Particularly large boom with material roll, extendable up to 2400 mm Saw blade pendulum guard that can be swung away to the side with integrated suction nozzle Optionally available: mitre stops that extend up to 1500 mm for attachment directly to the sliding carriage Gsdpovxvbpsfx Admjil Numerous equipment options for individual adaptation

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Features and technical specifications: - Professional sliding table panel saw in heavy-duty design - With scoring unit; adjustable from the outside with separate drive motor - Sliding table made of anodised aluminium with proven and permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer’s warranty from date of first commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick-clamping mechanism and integrated fine adjustment - Table extension - Table width extension - With integrated on/off switch on the sliding table - With motorised height and tilt adjustment of the saw unit, digital display for tilt angle - Programmed control of saw blade height, tilt, and rip fence position - Pivoting control panel at eye level - Quality made in Italy - Cutting length: 3,200 mm - Cutting height at 90°/45° with scorer, max.: 136.5/97 mm - Crosscut width left of saw blade, max.: 3,260 mm - Rip capacity with rip fence: 1,270 mm - Saw blade tilt: 90° – 45° - Saw blade diameter with scorer, max.: 400 mm - Scoring saw blade: 120 mm - Main saw blade speed: 3,500/5,000 rpm Gsdpfex Hbrujx Admoil - Scoring blade speed: 9,200 rpm - Sliding table dimensions: 360 x 142 x 3,200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit power: 0.55 kW Dimensions: approx. 3,200 x 950 mm Weight: approx. 745 kg Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources Gjdpfxjcnw U De Admeil High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: used, Year of construction: 2018, Nominal air flow: 5,089 m³/h Inlet nozzle: Ø 300 mm Negative pressure at nozzle: 2,434 Pa Filter cleaning: compressed air Chip collection volume: 3 x 165 liters Motor power: 7.5 kW | 400 V - 50 Hz / IE3 Sound pressure level: 71 dB(A) Max. compressed air connection: 6.0 bar Protection: 25 A Dimensions (LxWxH): 3,050 x 1,058 x 2,361 mm Weight (net): approx. 952 kg Stock location: Nattheim Gsdpfsxnlapox Admsil

Condition: new, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 115 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, rotational speed (min.): 4,500 rpm, rotational speed (max.): 4,500 rpm, power: 4.5 kW (6.12 HP), sliding table length: 3,200 mm, Equipment: motor brake, scorer, Sawblade tilt and height adjustment are manual. Heavy weight ensures vibration-free operation. Large outrigger table with material roller. Parallel stop with round bar guide. Extendable aluminum longitudinal stop with two folding stops. 7.5 kW main motor mounted on a robust cast iron frame. Four-bearing sliding table made of anodized aluminum with high torsional rigidity. Standard table extension and table extension made of heavy-duty sheet metal. Large pendulum guard can be easily raised using a gas spring. Quick and convenient sawblade changes thanks to the Rapid clamping system. Multiple locking mechanisms on the sliding table. Length approx. 3386 mm Width/Depth approx. 3600 mm Height approx. 1310 mm Weight approx. 800 kg Extraction connection. Extraction nozzle diameter: 120 mm Extraction nozzle diameter of sawblade guard: 80 mm Electrical data. Power consumption: 4.5 kW Connection voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level 96.5 dB(A) Circular saw unit Cutting width with parallel stop 1300 mm Max. cutting width to the left of the sawblade 3200 mm Sawblade inclination 90 – 45° Max. cutting height 90° 115 mm Max. cutting height 45° 80 mm Sawblade diameter 350 mm Sawblade speed 4500 rpm Sliding carriage and table Gedpfxowa I Eze Admjil Sliding carriage length 3200 mm Sliding carriage width 416 mm Sliding carriage height 890 mm Table length 1008 mm Table width 554 mm Table height 885 mm Scoring unit Scoring sawblade diameter min. 120 mm Scoring sawblade diameter max. 125 mm Scoring sawblade speed 8000 rpm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner agreed upon with you.#####

Condition: used, Year of construction: 2022, Used Machine Year of Manufacture: 2022 Features and Technical Data: - Ideally suited for demanding craftsmen and joiners/cabinetmakers - Extra-long, one-piece surfacing tables ensure easy and precise jointing of workpieces - Working tables are made from cast iron, making them highly durable and permanently flat; simultaneously opening surfacing tables with spring-loaded supports enable quick and convenient changeover - Fixed-mounted extraction hood means no need to disconnect the extraction hose during changeovers, saving valuable working time - Helically-geared steel infeed roller for consistent and even timber feed - Rubber outfeed roller at the thicknesser exit ensures uniform wood discharge - Four feed speeds for material transport - Thicknessing table adjustment by handwheel with integrated height display - DIGITAL version: with electric thicknessing table height adjustment and digital readout - Start/Stop switch located at operator position - Powerful industrial motor - High machine weight guarantees maximum precision and smooth operation - Prepped for long-hole drilling attachment - Quality Made in Italy - Equipped with spiral cutterhead - Fitted with foldable cutterhead guard - Total table length: 2,250 mm - Maximum cutting depth: 5 mm - Working width: 520 mm - Thicknessing height range: 3 – 240 mm - Number of knives: 66 pcs - Cutterhead speed: 5,000 rpm - Motor: 9 kW - Feed speed: 5/8/12/18 m/min - Extraction port: 120 mm Weight: 695 kg Dimensions: 2,250 x 1,440 mm Availability: approx. end of January 2026 Location: North Rhine-Westphalia Gijdpfx Ajx Hbrnedmsl

Condition: new, Year of construction: 2025, Dimensions and weights Length approx. 2000 mm width/depth approx. 1110 mm Weight approx. 430 kg Gijdpehkz E Tofx Admol Dressing table Feed table length 1034 mm chip removal max. 5 mm Connection suction Suction port diameter thickness 2 x 120 mm Thickness working height min. 3 mm working height max. 230 mm Chip removal max. 5 mm Electrical data Power drive motor 5 kW Supply voltage 400 V Mains frequency 50 Hz Planing cutterhead Type TERSA Number of planing knives 4 pcs Speed 5200 min¯¹ Max. planing width 410 mm Feed rate speed 6 / 12 m/min TERSA planing knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and even material feed Material feed with two speeds Numerical display for thicknessing table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Working tables are made of grey cast iron, annealed and stress relieved, thus insensitive and permanently flat Stable large aluminium dressing fence with round rod guide (1200 x 160 mm) Thicknessing table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth running. Powerful industrial motor Robust steel/cast iron construction Equipment details Dressing fence Stable, large dressing fence made of aluminium (1200 x 160 mm) With precise round bar guide Suction hose connection The suction ports for dressing and thicknessing point in the same direction during dressing and thicknessing. The dressing

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, functionality: fully functional, overall weight: 130 kg, height adjustment type: mechanical, input voltage: 230 V, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, Profile and strip sanding machine S 220 Giedpfx Aswa Nmgsdmel Year of manufacture 2018 With stop rail With extraction nozzle Machine is available immediately

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2022 Features and technical data: - Continuously inclinable sanding unit (0 - 90°) for vertical and horizontal sanding - Oscillating sanding belt for improved sanding results and increased belt service life - Fast and easy sanding belt change via quick-release system - Standard sanding pad with graphite coating for increased belt service life - Height-adjustable, robust worktable made of cast iron with T-slot, supported by spring suspension - Smooth height adjustment of the table by means of gas pressure springs - Including lateral sanding sleeve device for sanding curves and radii - Including continuously adjustable mitre fence - Two extraction ports Ø 100 mm - Sanding sleeve device including three rubber rollers (Ø 38/50/76 mm), three sanding sleeves (sanding width: 100 mm), four insert rings and height-adjustable table with extraction device - Table insert with slots for optimum dust extraction - Continuously tiltable sanding unit from 0 - 90° - Indexing at 0°/22.5°/45°/67.5°/90° - With rubberised sanding roller and graphite coating on the sanding pad - Standard with second emergency stop switch on top of the sanding unit - The continuously inclinable sanding unit enables a wide range of sanding applications, e.g. vertical and horizontal sanding - Sanding belt length: 2,270 mm - Sanding belt width: 150 mm - Belt speed: 16 m/s - Sanding area length: 770 mm - Sanding area width: 150 mm - Longitudinal table length: 680 mm - Longitudinal table width: 310 mm - Longitudinal table height adjustment: 130 mm - Cross table height min.: 920 mm - Extraction port diameter: 100 / 100 mm - Supply voltage: 400 V - Phases: 3 Ph - Mains frequency: 50 Hz - Power requirement: 2.1 kW - Fuse protection: 10 A Dimensions: 1,350 x 585 x 1,210 mm Weight: approx. 162 kg Gijdpfx Asx Hbrzsdmel Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Condition: new, Year of construction: 2025, Holzkraft Extractor RLA 210 For wood dust and shavings, designed for commercial use Item number: 5132100 Brand: Holzkraft Dimensions and weights Shavings collection volume: 2 x 165 l Nominal diameter of the external suction nozzle inlet: 200 mm Length: approx. 1755 mm Width/depth: approx. 830 mm Height: approx. 1800 mm Weight: approx. 259 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise emission Sound pressure level: max. 72 dB(A) Voltage flow: Nominal flow rate: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with low noise Space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Gisdpfx Adohk Dfrjmsl Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor is delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminized polyester fleece, washable and therefore with a long service life Filter is tested and approved as standard in an antistatic version according to category M-BIA Filter resistance monitoring via differential pressure cell, adjustable with a warning light on the unit Control box The fan is installed downstream of the filter. Equipment details With a new locking device for secure container positioning. Location: From stock, 54634 Bitburg - Available at short notice.

Condition: as good as new (ex-display), operating hours: 5 h, functionality: fully functional, saw blade diameter: 250 mm, cutting length (max.): 4,100 mm, cutting height (max.): 60 mm, total height: 3,000 mm, total length: 5,300 mm, total width: 180 mm, type of input current: three-phase, input voltage: 400 V, saw blade bore: 30 mm, main saw diameter: 250 mm, rotational speed (max.): 4,800 rpm, power: 3 kW (4.08 HP), Equipment: scorer, Smooth and ergonomic operation Scoring unit for splinter-free cutting quality Slatted frame automatically retracts Gjdpfewz Nq Ijx Admeil Continuous central workpiece support surface Two measuring stops Panels sit on movable rollers and can be repositioned without lifting Modular, welded machine frame is torsion-resistant and self-supporting Saw unit with chain guide and two operating levers Large opening for saw blade change This is a demonstration machine that has been used once at a trade fair.

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Like-new condition Features and technical specifications: Total table length: 2720 mm Infeed table length: 1498 mm Maximum planing depth: 8 mm Planer fence length: 1200 mm Planer fence height: 190 mm Swivel range of fence: 90 – 45° Dust extraction connection: Extraction port diameter (thickness): 120 mm Installation information: Required length: 2750 mm Required width/depth: 1604 mm Note on space requirement: Dimensions account for maximum travel paths or usable lengths. Electrical data: Drive motor power: 7 kW Connection voltage: 400 V Mains frequency: 50 Hz Cutterhead: Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Godewka Txopfx Admjil Maximum planing width: 520 mm Dimensions and weights: Length approx.: 2750 mm Width/depth approx.: 1500 mm Weight approx.: 720 kg Availability: short-term Location: Röllbach

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Equipment Gisdpfx Aohp Rc Ijdmjl Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 210PM2219030008, type of input current: three-phase, filter area: 22 m², total height: 1,800 mm, total width: 830 mm, total length: 1,717 mm, overall weight: 290 kg, nominal flow rate: 2,262 m³/h, input voltage: 400 V, extraction nozzle diameter: 200 mm, noise level: 72 dB, power: 3 kW (4.08 HP), input frequency: 50 Hz, tank capacity: 2,165 l, Used system with slight damage/scratches on the machine housing. There is still some fine dust in the machine. Serial number: 210PM2219030008 Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with little space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, making it flexible to use Gjdpfevu Dcyjx Admoil Large inspection openings Large-sized, mobile chip containers with clamps and chip collection bag Dust extractor already fully assembled when delivered, making it quick to use All models mobile For model RLA 210: Optimal chip distribution in the chip containers due to large Filter area Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, thus with a long service life Filter tested and approved as standard in antistatic design according to category M-BIA The fan is connected downstream of the filter Unit of measurement: piece Packaging unit: 1 Metal fan wheel Inspection opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Pre-equipped for connection of machine detection for up to 8 machines and slide controls Machine detection via potential-free contact Pneumatic cleaning (compressed air connection via standard plug, working pressure 4 - 6 bar)

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2024 Condition: as new, machine is unused Features and technical data: - Cutting height: 2,200 mm - Cutting length: 5,100 mm - Cutting depth: 60 mm - Saw blade diameter: 250 mm - Drive motor power: 3 kW - Saw blade speed: 4,800 rpm - Scoring blade diameter: 80 mm - Scoring blade speed: 8,500 rpm - Stops: 2 pcs. - Sound pressure level: 89.2 dB(A) - Extraction nozzle diameter: 100 mm - Extraction air requirement: min. 1,000 m³/h - Extraction air velocity: min. 20 m/s - Connection voltage: 400 V Godpfx Aex H Dabsdmoil - Mains frequency: 50 Hz - Smooth and ergonomic operation - Scoring unit for splinter-free cut quality - Slatted frame automatically adjusts - Continuous central workpiece support - Two measuring stops - Panels rest on movable rollers and can be repositioned without lifting - Modular welded machine frame, torsion-resistant and self-supporting - Saw unit with chain guide and two control levers - Large opening for saw blade replacement Scope of delivery: - Saw blade Ø 250 x 30 x 3.2 mm Z80 trapezoidal - Scoring blade Ø 80 x 2.8-3.6 mm Z20 Dimensions: approx. 6,300 × 1,800 × 3,000 mm Weight: approx. 800 kg Availability: short-term Location: 63934 Röllbach

Condition: as good as new (ex-display), Year of construction: 2025, Planer Thicknesser with TERSA Planer blade quick change system. With TERSA quick-change system for fast planing blade replacement TERSA Planer blade system allows for especially quiet running Diagonally serrated steel feed roller for constant and uniform material feed Robust dressing tables made of ribbed grey cast iron, milled and stress-free, this resistant and durable plan Large, pivoting dressing stop for precise alignment, 90 ° / 45 °, with quick clamping Back opening dressing table Powerful motor Robust steel / cast iron construction Milling can be retrofitted Equipment details TERSA Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Particularly low noise Perfect plane results Surface Planer Fitted as standard with the TERSA Planer blade quick change system Large dressing tables The dressing and fixed width tables made of grey greeting guarantee highest quietness and vibration-free. Thickness Planer With the powerful thickness feed, workpieces can be planed up to 200 mm height. The helical feed roller guarantees the constant feeding. The conversion of Abrichtzu thickness Planer is in seconds with one hand. Drive Gijdpfx Adedqy Uqemol Stable-focused chain drive Steel drive wheels Massive cast iron pillow block Planing mill Massive arrestors prevent kickback of workpiece

Condition: new, Year of construction: 2025, Holzkraft Combined planer-thicknesser - immediately available - Ideal for demanding craftsmen and carpenters The extra long planing tables made of one piece allow easy planing of the workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open simultaneously to the rear with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during retooling, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Kdf9ktm Weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thickness table Length 850 mm Thickness table width 520 mm Working height min. 3 mm Working height max. 240 mm working length min. 220 mm chip removal max. 5 mm Electrical data Supply voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ planing width max. 520 mm Gisdoih Dxdopfx Admsl Feed rate speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Sturdy cast iron steel construction Large dimensioned milling unit made of cast iron, swivels up to -45° backwards Indication of the milling speeds by LEDs Fast, trouble-free speed change via eccentric voltage Right-left rotation Display of height and inclination 1/10 mm accurate Milling fence in heavy professional design: with fine adjustment via toothed rack, with numerical display, aluminum stop jaws, 3-fold positionable for fast repetition of the adjustment TECHNICAL DATA Suction connection suction port diameter 2 x 120mm working table working table length 2500mm Working table width 655mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 - -45 Gsdpfx Aoiidnfjdmsil useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ spindle mandrel diameter 30mm Milling tool diameter max. tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 210 - 240mm tool diameter max. tenon milling 320mm SUPPLY Aluminum milling stop jaws Arch milling protection hood Motorized height adjustable and swiveling milling spindle Digital display of the set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Woodworking machinesTable routers Minimax twf55 es Item number: 5502261 Sturdy cast steel construction Anodized aluminum sliding carriage Godpfx Adsi Dphtomeil Large dimensioned milling unit made of grey cast iron, swivels up to -45° to the rear Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Height and inclination display accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress relieved and re-annealed for lasting precision Powerful 5.0 kW industrial motor Curved milling hood included in delivery Made in Italy Dimensions and weights Length (product) approx. 1200mm width/depth (product) approx. 2000mm Weight (net) approx. 510kg Connection suction suction connection diameter 2 x 120mm Work table working table length 1200mm working table width 530mm table height 900mm sliding carriage length 1200mm Slide width 360mm Slide height 142mm Installation information Required space length 2800mm Space requirement width/depth 2910mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 to -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed indicator LED on the front of the machine spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 240mm Tool diameter max. tenon milling 320mm EQUIPMENT Equipment Aluminum sliding carriage ✔ Milling fence Heavy-duty professional version with hold-down device, protective cover and aluminum milling fence jaws Telescopic miter fence with two folding stops Cantilever table ✔ Curved milling protective hood ✔ Eccentric clamp ✔ Handle on sliding carriage ✔ Height adjustment of the spindle manually Tilt adjustment of the spindle manual Control manual height and tilt adjustment of the milling unit Position of the control elements on the machine body location: ex stock 54634 Bitburg - immediately available -