Used Holzher Cut 6120 for sale (174)

Condition: used, Year of construction: 2014, For inquiries: Zoltán Utasi +36 30 205 7380 • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic Pgsdpfx Adsx Huhcj Ssr including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Condition: excellent (used), Year of construction: 2022, • Cutting height 2200 mm x cutting length 4300 mm • Extraction to CE TRK Regulations CH 2200 (less than 2 mg of fine dust/m³ air) • Middle workpiece support - 4 zones • Sliding carriage 1255 for cutting height 2200 mm • Saw unit 4,0 kW, 5400 min-1, 400 V, 50 Hz incl. HW-saw blade Ø 250 x 30 x 3,2 mm, Z 48, Hohl-Dachzahn • Length stop (manual) with digital read out for vertical cuts. For middle workpiece support • Digital display for horizontal cuts at the control panel incl. electrical fine adjustment • 3 adjustable stop points in the saw beam for repeating horizontal cuts via stop point • Strip stop for repeating horizontal cuts, Scale in mm, max. strip height 650 mm Pgedpsy Nmtcjfx Ad Sjr • Narrow part device (2 pcs) Avoids tilting of workpieces • Super Cut scoring device: For scoring the surface of covered materials. • Cutting optimization Opti-Base V-Cut 1 pc 10ˇTouch-screen 1 pc Software machine 1 pc Software office- 1 place floating network license (Opti V-Base) 1 pc label printer • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Cutting height 1.800 mm machine weight ab. ca. 600 kg kg Pjdpfxsygm Tij Ad Segr

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Pgsdpfjygn Ibjx Ad Sjr Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Pgsdpfsv Sv Enox Ad Sjr Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: good (used), Year of construction: 2002, functionality: fully functional, Edgebander HOLZHER, type 1310, equipped with: cartridge glue station, flush end trimming, two multi-milling units, profile scraper, buffing units, condition good Podpfx Ajx H Sutjd Sjgr

Condition: used, Year of construction: 2016, CNC machining center Holzher Evolution 7405 for sale, year 2016, in excellent condition, located in Serbia. This high-performance machine is designed for precise processing of furniture components and other wooden materials, making it ideal for professional workshops and production. Technical specifications: Model: Holzher Evolution 7405 Year: 2016 Psdpfxeyyxute Ad Ssgr Type: CNC machining center for wood Condition: Excellent, regularly maintained Location: Serbia Advantages and description: Multi-axis precision machining of components High productivity and reliability Suitable for the professional furniture industry Easy operation and programming

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Podoy T D N Ajpfx Ad Sjgr Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: ready for operation (used), Year of construction: 2000, Holzher 1417 edge banding machine Gluing thickness 8 mm feed speed 11 m/min Joint trimming with DIA tool type 1961 Snipping unit 1918 Flush trimming unit 1823 Multifunction unit 1942 Scraper unit 1929 R2 Psdpfx Adouaqh Uo Sogr Copy trimming unit 1983 Surface scraper unit 1964 Buffing unit 1944 K Condition checked for function Year of construction 2000 Price 12000.

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026 and will continue to operate until August 5, 2026. The machine has the following configuration: Edge milling unit 1802 Motor power: 2 x 2.0 kW 1st milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for edge milling unit 2nd milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for edge milling unit Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Reservoir for 14 cartridges (1.4 kg) GluJet collection container Printing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile milling unit 1833 MOT4 1st milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Tungsten carbide reversible inserts for scraping blade holder R = 2 mm (2 pieces required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Pedpfx Aszrf Nred Sjgr Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide rail length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - tactile probe vertical, top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: not inspected (used), Year of construction: 2006, for coil and strip material from 0.4 - 15 mm max. panel thickness 60 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication Pgjdsy Ici Rspfx Ad Sor idler roller for shortest workpiece sequence safety/soundproof hoods central dust extraction connection, D = 160 mm, edge trimming units, D = 120 mm chip collection box, D = 100 mm equipped with: > Edge trimming units 1961 incl. DIA cutter > Memory-programmable screen control Edgecontrol > Automatic edge magazine 1901 for coil and strip material > Gluing station 1905 for cartridges + granules incl. sensing nozzle > Pressing unit 1926, motor-driven/pneumatic > Cutting unit 1819, motor-driven > Flush trimming unit 1962 > Multi-function trimming unit 1966 with various radii/chamfers > Multi-radius draw blade unit 1965 with various radii > Corner copying unit 1983, R = 2 mm incl. one interchangeable motor, R = 1 mm > Straight draw blade 1964, controlled by program > Deburring unit 1944, controlled by immersion > Spray device 1856 at the infeed and outfeed > Belt bridge > stepless feed rate up to 24 m/min > Shear arm > motor-driven bridge adjustment > infeed guide rail, motor-driven adjustable Length 8200 mm Width 1300 mm Height 2000 mm Weight 3300 kg

Condition: excellent (used), functionality: fully functional, A Great Machine for edging doors and cabinets with solid edging, this machine will do a 20mm solid edge. Pgsdpozif Ezofx Ad Sor

Condition: used, Year of construction: 2007, Second-hand machine Year of manufacture: 2007 Specifications and technical data Cutting length: 5,300 mm Cutting height: 2,200 mm (trimming height 2,110 mm) Cutting depth: max. 60 mm Extraction system: - Saw unit 120 mm - Frame width 100 mm Workpiece support: - Sturdy plastic support for optimum stability, even for narrow workpieces. - Chips are removed via slanted slots. Lift-roller transport system: Manual, for light and gentle transport of materials Clamping: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Circular saw blade: carbide-tipped, 250 mm, hollow roof-tooth, Z48 Saw motor: 4 kW at 5,450 rpm, 400 V, 50 Hz Tilting table: including workpiece support for narrow parts (5 positions) Includes strip stop with Supercut scoring device Extraction system in accordance with BG TRK guidelines (less than 2 mg of fine dust per m³ of air) Availability: at short notice Pgsdpfx Adezk N S Io Sjr Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pgodpfoztkfbsx Ad Ser Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: excellent (used), CATALOGUE NUMBER 8010 TECHNICAL DATA Pgedezw Dx Aopfx Ad Ssr Equipment: - table - pre-milling - belt feeder - 2 glue tanks: for granules and cartridges - currently, the machine uses hot melt adhesive (granules) - guillotine – for pre-cutting veneer - 3 pressure rollers - 2 trimming units with saws for final trimming - 2 milling units for edge shaping (radius cutters) - corner rounding unit - sanding units – for removing excess glue - polishing units - stepless feed rate adjustment 8-18mm - workpiece thickness 6-45mm - minimum workpiece length 180mm - minimum workpiece width 600mm - maximum veneer thickness fed from a roll 3mm - air consumption 6-8 bar - dust extraction nozzle diameter 7x80mm, 1x130mm - dimensions L/W/H 6650x1260x1700mm - weight 1850kg ADVANTAGES – Made in Germany – Spray system – Pre-milling and corner rounding – 2 glue tanks – Includes 4 additional milling cutters – Unpainted – Original technical documentation and CE marking – Very good condition – Used veneer edging machine Net price: 49900 PLN Net price: 11880 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2019, I sell the fully equipped edge banding machine Holz-Her Streamer 1057 XL, year 2019: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable Clue scrapers pneumatic adjustable Cleaning brushes top + bottom Pgodozr Rwhopfx Ad Ser Cleaning fluid spray front + back Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 10m/min. Total length including feeding plate 4200mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 101-335, functionality: fully functional, Machine available starting in early October 2026. The machine can be inspected and demonstrated at the customer's site. Workpiece thickness: 8 - 60 mm Workpiece length: min. 160 mm Feed rate: 10 m/min -extendable workpiece support -motor-driven pressure bridge, PLC-controlled -1888 control panel PPC 231 U+E -1801 joint milling unit incl. 2 joint milling cutters 70x64x30 -1903 edge feeder, fully automatic -GJ 301 Glue-Jet adhesive application system incl. sensing nozzle and cartridge magazine for EVA & PUR adhesive cartridges -1912-3 printing unit, pneumatic Podpfx Adjzg Upwj Sogr -1918 trimming unit with pneumatic swivel 0 -12° via PLC -1827 milling unit, motor 4, pneumatic, via PLC 1832 profile milling unit (Auriga SPS) 1929 radius scraping unit, motor 2, SPS 1964 surface scraping unit 1856 release agent application at the front, cleaning agent application at the rear, spraying 1940 wiping unit Overall length: 4930 mm Weight: approx. 1430 kg

Condition: excellent (used), functionality: fully functional, saw drive: 3,000 W, Holz-her 1220 automatic vertical panel saw. Pjdpfx Aex Eyqysd Sjgr Multiple settings, half or whole board cutting. You can try it, it works well.

Condition: excellent (used), Panel Saw HOLZ-HER 1255 -used- Welded frame with extremely high rigidity, pneumatically retracting shifting grid, stable latching of the saw carriage at both top and bottom, latch monitoring in vertical cut electrically controlled, foldable plunge lever on the saw unit, retractable riving knife for cut-outs, operator panel at eye level, digital display on the longitudinal fence, digital display for horizontal cut, strip cutting device, roller lift transport system, trim-capable support surface, dust extraction device TRK, dust-tested. ----- Technical Data ----- Cutting length: 5200 mm, Cutting height: 2200 mm, Trimming height: 2100 mm, Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120/100 mm, Compressed air: 6 bar, Required space (LxWxH): 6500x1650x3050 mm, Weight: 900 kg Quality Information: - Fence strips replaced / refurbished - Comprehensive basic inspection - Complete basic cleaning - Electrical system checked Pgsdpfxjyyzp Hs Ad Sjr - Immediately operational

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Condition: Guide slightly worn, now only suitable for rough cutting Features and technical specifications: - Cutting length: 4,300 mm - Max. clearance height: 2200 mm - Max. trimming height: 2100 mm Pedpozk N Hxefx Ad Ssgr - Max. vertical scoring height: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4,500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), Panel Saw HOLZ-HER 1255 SECTOR pro – used – Pgsdpfx Adjy N Rihs Sjr • Welded frame with extremely high rigidity • Pneumatically retractable support grid • Sturdy saw carriage latching mechanism at top and bottom • Electrically monitored latching in vertical cutting mode • Foldable plunge lever on the saw unit • Retractable riving knife for cut-outs • Operator control panel at eye level • Digital display on longitudinal fence • Digital display for horizontal cut • Strip cutting device • Lift roller transport system • Trimmable support table • TRK extraction unit • Dust tested • Only used for 2 months ----- Technical Data ----- Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 60 mm Saw blade Ø: 250 mm Motor: 4 kW Extraction port Ø: 120 +100 mm Compressed air: 8 bar Year of manufacture: 2025 Quality info: - Complete basic inspection - Complete basic cleaning - Ready for immediate use

Condition: excellent (used), Year of construction: 1993, Technical specifications: Manufacturer: Striebig Year of manufacture: 9/1993 Type: Standard II Plus 5220A Feed: manual Design: automatically adjusting aluminum slat bed Saw carriage locking: manual Lowering of saw unit: manual Swivel adjustment 0 to 90°: manual Motor power: 4.4 kW Cutting range: 4600 × 2200 × 60 mm Psdpfx Adsiwlz Ao Sjgr Speed: 5250 rpm Saw blade diameter: 300 mm Space required: L × H × W 5700 × 3000 × 1400 Condition: very good Location: warehouse Saw blade: 1 piece Can be loaded onto a truck using a forklift on site. Delivery and assembly possible by arrangement.

Condition: used, Year of construction: 1990, Second-hand machine Year of manufacture: 1990 Features and technical specifications: - Automatic edge feeding - Cartridge gluing system - 4-roller pressure unit - Cross-cut saw unit - Flush milling unit - Combined milling unit for flush, chamfer and radius - Radius scraper blade - Sanding unit - Edge banding thickness 0.3–20 mm - Edge banding height: max. 66 mm - Edge banding length: min. 200 mm - Feed rate 8/16 or 12/24 m/min Availability: at short notice Pjdpezk N Amjfx Ad Sogr Storage location: 63934 Röllbach

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: Control system with LCD display swivelling control panel Programme memory Manual pressure bridge adjustment Feed via conveyor chain Extendable workpiece support Joint milling unit 1961 : - 2 x 2.0 kW - Diamond jointing cutters in synchronous and counter-rotating operation, Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - automatic feeding of roll and strip stock Glue application system 1906: - Cartridge system with sensing nozzle – with automatic reloading - PUR adhesives can be used Printing unit 1816: - with powered roller - pneumatic control of the printing unit Trimming unit 1918: - 2 x 0.22 kW - swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - for flush, radius and chamfer milling - motorised adjustment - Blow nozzle on the milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, post-forming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edging up to 3 mm - Chip collection box for radius scraper Surface planer 1964: - application-controlled surface scraper - Air nozzle on the surface scraper Buffing unit 1940 Edge thickness (roll stock): 3 mm Edge thickness of strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Pgedpfx Adjzk Nwwj Ser Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Workpiece support clearance: 470 mm Support plate diameter for edging material: 800 mm Trimming blade for roll stock up to: 3 mm Heating-up time: 3.5 min Power of jointing cutters: 2 x 2 kW Cross-cut saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Power for corner copying: 0.22 kW Extraction nozzle for joint milling unit: 120 mm Extraction nozzle for milling unit: 70 mm Extraction nozzle for scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: at short notice

Condition: used, Year of construction: 2002, total length: 5,050 mm, total width: 2,420 mm, total height: 800 mm, Colour: Grey Weight: 750 kg - Details: - └ Description: Digital readout does not function. - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 221 / 0-206 - Max. cutting height vertical [mm]: 1950 - Max. cutting height horizontal [mm]: 1900 - Max. cutting width [mm]: 3300 - Max. cutting depth [mm]: 50 - Max. saw blade diameter [mm]: 300 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes Podjzcng Nepfx Ad Sjgr - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 5050mm x 2420mm x 800mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels