Used Hobbing Machine for sale (83,374)

Year of construction: 1982, condition: ready for operation (used), Cutter speed: 250rpm, max. machinable module: 16/DP1.5, max. workpiece diameter: 1250mm, table diameter: 1100mm, indexing gear diameter: 987mm, workpiece bore: 250mm, workpiece insertion depth: 525mm, min. cutter adjustment above table: 390mm, cutter slide travel: 1000mm, rapid traverse: 800mm/min, max. table load: 8000kg, weight: approx. 21000kg. Documentation available. An on-site inspection is possible. Redpfx Aaoxq Eybj Eel

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1719, wheel diameter: 280 mm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Rsdsw T R Auepfx Aa Eol MACHINE DETAILS Machine weight: 13 t Operating voltage: 400 V Control voltage: 24 V DC

Condition: good (used), Year of construction: 1984, max. wheel diameter 400 mm gear width 275 mm max. module 6 Rjdpov T Nqaofx Aa Ejl weight of the machine ca. 5,5 t

Condition: excellent (used), Max. Wheel Dia: 1600 mm Min. wheel Dia: 800 mm Gear width: 560 mm Max. module: 16 Min. Module: 4 Table dia: 1350 mm Table load cap: 7000 Kg Machine weight: ca. 18 Tonnes Machine with change gear, arbors, fixtures set Rodpfxev Igc Ns Aa Eol Machine is in excellent condition

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Redpfxjw Hquxo Aa Eel Height: 1,600 mm Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. Rodpfxew Al U Es Aa Eel For more information, please contact us.

Year of construction: 1970, condition: ready for operation (used), Wheel diameter: 160mm, max. wheel width: 355mm, module range: 0.5-4.5, max. cutter diameter: 115mm, max. cutter length: 105mm, cutter head swivel range: 120°, speed: 400rpm, distance between centers: 410mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible. Rsdpjxph Skjfx Aa Ejl

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1130, table diameter: 250 mm, wheel diameter: 280 mm, spindle speed (max.): 1,500 rpm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Table speed range: 100 rpm Table diameter: 250 mm Centre distance: 15 - 285 mm Max. axial travel: 350 mm Milling Head Drive power: 16 kW Min. number of teeth: 4 Cutter speeds: 1,500 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Tangential travel: 200 mm Tangential speed: 3,000 mm/min Swivel angle: ± 45° Rsdpfx Aow T R Ahja Eol MACHINE DETAILS Approx. machine weight: 13,000 kg Supply voltage: 400 V Mains frequency: 50 Hz Connected load: 35 kVA

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head Rjdsub Amfopfx Aa Eel - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Condition: new, center distance 2000 3000 4000 5000 6000mm Rjdjvnmlqopfx Aa Eel

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Machine still under power and production can be seen at any time. Technical Data – PE 150 This hobbing machine with automatic workpiece change system is designed for series production of workpieces, for which the corresponding drawings have been received. Our specialists for automatic workpiece changing systems will gladly assist you if you wish to convert the machine for milling different workpieces. Hob Cutter: Max. permitted cutter outside diameter: 130 mm Max. length (depending on cutter arbor diameter): 220 mm Slide Travel: Radial (X-axis): 150 mm Tangential (Y-axis): 170 mm Axial (Z-axis): 200 mm Max. Swivel Angle of Milling Head: In +A direction: 30° In -A direction: 45° Workpiece Table: Outer diameter: 160 mm Bore diameter: 63 mm Overall Dimensions of the Machine: Length: 5,820 mm Width: 4,047 mm Height: 2,810 mm Approximate Weight of Machine: 8,000 kg Speeds: Feeds: Axes X, Y, and Z: 1 to 3,000 mm/min Rapid Traverses: Axes X, Y, and Z: 3,000 mm/min Redsu N E Rropfx Aa Eol Spindle Speeds: Tool (S-spindle): 150 to 600 rpm Workpiece table (C-axis): 1 to 125 rpm Electrical Equipment: Operating voltage: 400 V Supply voltage: 230 V Control voltage: 24 V Frequency: 50 Hz Connected load of the machine: 48.5 kVA Cable cross-section: 25 mm² Fusing: 100 A

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, VEB Fritz Heckert ZFWVG 250×2000 Maximum workpiece length: 2,000 mm Maximum workpiece diameter: 250 mm Rodew Dvanspfx Aa Ejl Accessories: 2nd milling head, hob cutters in various modules, steadies, clamping devices, etc.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, gear diameter: 180 mm, travel distance Z-axis: 300 mm, shaft length: 640 mm, TECHNICAL DETAILS Wheel diameter - max.: 180 mm Module - max.: 4 Carriage travel axial (Z-axis): 300 mm Shaft length - max.: 490-640 mm Y-axis travel: 33 - 193 mm Rjdpsw T R Abjfx Aa Eel MACHINE DETAILS Total power requirement: 14 kW Machine weight: 8 t Workpiece counter: 886,067 pieces

Condition: used, Year of construction: 1992, max. wheel diameter 160 mm gear width 710 mm max. module 4,5 min. module 0,5 milling spindle speeds (infinitely variable) 70 - 400 U/min centre distance 800 mm total power requirement 11 kW weight of the machine ca. 4,7 t dimensions of the machine ca. 3,6 x 3,0 x 2,0 m 2-cut-cycle, shifting, very nice condition. Change gears, arbors. Rsdpfx Aevz Edrea Ejl

Condition: like new (used), Year of construction: 2004, More Photos coming soon hob cutter: -Largest permissible tip circle diameter: 80 mm Largest toothed length: 70 mm Largest total length: 240 mm Taper for trimming with counter bearing steep taper 1:3, 4286 Mounting diameter of the collet: 32 mm Sliding paths: Radial (X-axis): 100 mm Tangential (Y-axis): 160 mm Axial (Z-axis): 300 mm Tailstock (Z4 axis): 350 mm Loading gantry (X5 axis) 3800 mm Largest milling head swivel angle: Direction +A: 40 degrees Direction A: 40 degrees Workpiece spindle: Outer diameter: 160 mm Bore: 63 mm Overall dimensions of the machine: Length: 9130 mm Width: 3895 mm Height: 3200 mm Gain of the machine: 8400 kg Feed rates: X and Z axes: 1 to 10000 mm/min Y axis: 1 to 5000 mm/min Rapid traverse: X, Z and Z4 axes: 10000 mm/min Y axis: 5000 mm/min X5 axis: 150 mm/min Speeds: Tool: 300 to 4000 min^-1 Workpiece spindle: 0 to 1000 min^-1 Operating voltage: 400 V Supply voltage: 230 V Control voltage: 24 V Frequency: 50 Hz Connected load of the machine: 48 kVA Cable cross-section: 35 mm2 Fuse protection: 70A wälzfräser: -Großter zulassiger Kopfkreissdurchmesser: 80 mm Groste verzanne Lange: 70 mm Größte Gesamtange: 240 mm Kegel zum Abstutzen m Gegenlager Steilkegel 1:3, 4286 Aufnahmedurchmesser der Spannzange: 32 mm Schlitterwege: Radial (X-Achse): 100 mm Tangential (Y-Achse): 160 mm Axial (Z-Achse): 300 mm Rjdpfoqpf Ifsx Aa Eel Reitstock (Z4-Achse): 350 mm Ladeportal (X5-Achse) 3800 mm Größter Fräskopfschwenkwinkel: Richung +A: 40 Grad Richtung-A: 40 Grad Werkstückspindel: Außendurchmesser: 160 mm Bohrung: 63 mm Gesamtabmessungen der Maschine: Lange: 9130 mm Breite: 3895 mm Höhe: 3200 mm Gewinnt der Maschine: 8400 Kg Vorschübe: Achsen X und Z: 1 bis 10000 mm/min Achse Y: 1 bis 5000 mm/min Eilgänge: Achsen X, Z und Z4: 10000 mm/min Y.Achse: 5000 mm/min X5-Achse: 150 mm/min Drehzahlen: Werkzeug: 300 bis 4000 min^-1 Werkstückspindel: 0 bis 1000 min^-1 Betriebsspannung: 400 V Versorgungspannung: 230 V Steuerspannung: 24 V Frequenz: 50 Hz Anschlußwert der Maschine: 48 kVA Kabelquerschnitt: 35 mm2 Absicherung: 70A

Condition: ready for operation (used), thread length: 3,000 mm, Thread milling and hobbing machine Maximum spindle bore: Ø 80 mm Depending on the travel, max. Ø 250 mm and min. Ø 20 mm are possible. Machining length: 3000 mm With accessories: change gears, steady rest For further technical data, see the PDF file. Rsdpfsv Huihex Aa Esl

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1443, table diameter: 180 mm, gear diameter: 200 mm, milling spindle length: 230 mm, spindle speed (max.): 750 rpm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Max. table speed: 100 rpm Center distance: 15 - 400 mm Machine column Max. axial travel: 600 mm Milling head swivel device Milling head swivel angle: ± 45 degrees Milling head Drive power: 27 kW Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter column Max. counter support travel: 540 mm Rodpfew T Ry Tsx Aa Ejl Max. counter support rapid traverse: 15,000 mm/min Max. counter support arm force: 13 kN MACHINE DETAILS Approximate total weight: 15,000 kg Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump flow rate: 24 l/min Hydraulic volume in hydraulic reservoir approx.: 7 l Max. average noise level: 82 dB(A)

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x330x245 cm weight of the machine ca. 5,5 t Specification: Max wheel diameter: 400 mm Min module: 1 Max module: 6 Table diameter: 370 mm Max wheel diameter: Rodpfxsu A I Els Aa Esl -With counterstay: 340 mm -Without counterstay: 400 mm Max axial offset: 275 mm Max tangential adjustment: 100 mm Tooth helical angle: 45 degrees Max cutter diameter: 145 mm Max hobbing length: 170 mm Hob turning speeds capacity: 63-180 U/min Feeds infinitely variable axial: 0,2-10 mm/U Feeds infinitely variable tangential: 0,1-5 mm/U Radial for spur gears: 0,1-4 mm/U Radial for worm gears: 0,025-1 mm/U Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/U Radial for worm gears: 100 mm/U Motor power: 7.4 kW

Condition: used, Horizontal Gear Hobbing Machine WMW MODUL ZFWZ 1250/3 Year of manufacture: 1982 Control: conventional Country of origin: Germany Max. gear diameter: 1250 mm Gear width: 600 mm Module – max.: 16 Rjdpfx Aowxxxcoa Eel Module – min.: 2 Cutter diameter: 240 x 280 mm Table clamping surface: 1020 mm Speed range: 28 – 200 rpm Axial feeds: 0.28 – 8 mm/min Radial feeds: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Swivel range of milling slide - L/R: +/- 45° Rapid traverse motor: 12.5 kW Voltage: 380 V Frequency: 50 Hz Total power requirement: 5/19.5 kW

Condition: used, Year of construction: 1969, max. wheel diameter 160 mm gear width 355 mm max. module 4,5 min. module 0,5 centre distance 450 mm total power requirement 11 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2x17,1,6 m Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Rodpfxjvz Ec Io Aa Eol Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Milling head - swivels 120 ° Milling cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Changing wheels - milling arbors - Clamping device Dra8M7 - documentation

Condition: good (used), max. wheel diameter 630 mm gear width 375 mm max. module 10 clamping table 550 mm Rsdjua It Uepfx Aa Eol table hole 125 mm milling spindle speeds infinitely variable 62 - 390 U/min taper MORSE 5 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 21 kVa weight of the machine ca. 8,2 t Equipment of the machine: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport - Year of construction approx. 1976

Condition: used, Year of construction: 2008, max. wheel diameter 900 mm gear width 450 mm max. module 10 min. module 1 min. number of teeth 8 milling cutter dia. x width 192 x 215 mm distance table / middle of spindle 910 / 630 mm distance bet. workpiece spdl. ctr-milling sp. 50 / 550 shifting 200 mm swivelling of milling head 240 Grad table diameter 700 mm table bore diameter 160 mm milling head speed 25 - 160 U/min total power requirement 21 kW change gears, arbors, shifting, 2-cut circle, chip conveyor, outer steady # with crowning device # Rjdpfx Aaowzmp Us Eel in excellent working condition

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing Rjdewzyp Ispfx Aa Ejl and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Condition: used, Year of construction: 2007, control Siemens 840D Rjdpfx Aaewzypue Eol

Condition: used, Year of construction: 2008, control Siemens 840D Rodpfx Aswzypnsa Eel