Used Himoinsa Hiw 100 for sale (37,849)

Condition: used, Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, -Stroke: 100 mm Ihjdpodkx Tcjfx Ag Uot -Piston: Ø 50 mm -Piston rod: Ø 18 mm -Total length: 340 mm -Total length extended: 440 mm -Dimensions: 66/66/H340 mm -Weight: 2.1 kg

Condition: used, Year of construction: 1992, functionality: fully functional, installation height: 700 mm, pressing force: 250 t, table width: 1,250 mm, table length: 1,150 mm, die cushion stroke: 150 mm, stroke length: 400 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Installation height: 700 mm ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish Ihjdpjup Si Hsfx Ag Ust

Condition: used, Plant: Used membrane filter press Ihjdpfxewy H Nrs Ag Uet Type: Passavant Noggerath Application area: Sludge dewatering Design: Sidebar frame Filter plate size: 1200x1200 Number of plates: 100 units / membrane-mix Filter plates: PP Filter cloths: optionally available, tailored to the medium Press volume: approx. 2900 dm3 Filter pressure: approx. 15 bar Pump technology: optional Purchase or rental: Inspection of the plant possible by appointment at our facility.

Condition: refurbished (used), Roller hearth furnace, make Mahler Ihodpfxjfc Hbdj Ag Uet type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Condition: used, Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 pcs. punching brackets, punching unit for press brake Year of manufacture approx. 1990 throat depth: 160 mm Punching capacity: 0.3 to 5 mm material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Ihodpfxsdz Sp He Ag Ujt A ø 5 mm round punching tool is installed Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brake Punching frame base plate dimensions L x W x H: 2500 x 345 x 37.5 mm Punching frame pressure plate dimensions L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Space requirement approx. 1070 x 1200 x 1060 mm Net weight approx. 1050 kg TECHNICAL DESCRIPTION Ihjdpfxjwxz U Hj Ag Ujt Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen 2 feed speeds 7 + 14 m/min Touch panel 4.3" Location: Flörsheim Availability: Immediately

Condition: used, machine/vehicle number: 8802, Inlet cross section approx. 650x1000 mm 3-knife rotor (staggered knives) 2 stator knife rows Rotor diameter 500 mm Rotor width 1000 mm Iedpfx Asghgiaeg Uoht

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: H92-2348, table width: 1,150 mm, table length: 1,250 mm, pressing force: 250 t, stroke length: 400 mm, Control system retrofit to SIEMENS (2005) TECHNICAL DETAILS Press force at 260 bar: 250 t Table clamping area: 1,150 x 1,250 mm Ram clamping area: 1,150 x 1,250 mm Draw cushion area: 800 x 1,000 mm Draw cushion force at 200 bar: 100 t Draw cushion stroke: 150 mm Installation height: 700 mm Ram stroke: 400 mm Oil quantity: 2,300 l Ijdpfx Aowur R Rog Usht Return speed: 330 mm/s Rapid approach speed: 365 mm/s Working speed (partial load): 36 mm/s Working speed (full load): 15 mm/s MACHINE DETAILS Power requirement: 45 kW Weight without oil: 28 t Machine height: 5,400 mm EQUIPMENT - Programming language: Polish

Condition: used, System: Chamber filter press mobile, used Type: Netzsch Application area: sludge dewatering Machine No.: 89040419 Year of construction: 1994 Filter plate size: 1200x1200 Number of plates: approx. 100 Filter plates: PP Filter cloths: optionally available in accordance with the medium Ihjdswqydkepfx Ag Ujt Filter area: approx. 250 m2 Press volume: approx. 3540 dm3 Filter pressure: approx. 15 bar Washing system: No Conveyor technology: Conveyor belt underneath Discharge: Telescopic conveyor belt Kastner Polymer system: Alltech 3-chamber Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, inner diameter: 250 mm, outer diameter: 300 mm, For the production of internally and externally toothed cylindrical gears and other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference, as well as for the production of profiles using the single part process. incl. robot automation: coordinated Fanuc robot for loading and unloading TECHNICAL DETAILS CNC control: Siemens SINUMERIK 840 D sl External toothing: 300 mm Internal toothing: 250 mm Largest workpiece orbital diameter: 450 mm Nominal machine module: 8 mm Largest toothing width: 100 mm Shaping spindle stroke rate range Special version: 85 - 850 rpm Spindle diameter: 95 mm Mounting: HSK-B80 taper Distances and adjustment ranges Smallest pitch height of the hydrostatic inclined guide: 400 mm Smallest/largest distance between tool and workpiece axis: -70 / +230 mm Stroke position adjustment range (manual): 75 mm Stand lateral offset range: ±25 mm MACHINE DETAILS Weight of the machine: approx. 7,000 kg CONTROL AND DRIVE CNC control: Siemens SINUMERIK 840 D sl Control group: NCU 720.3PN with PLC 317-3PN/DP Drive system: SINAMICS S120 (digital drive technology) Measuring systems: - Absolute encoders for linear and rotary axes (except endless rotary axes) - Incremental measuring systems for C-axis NC axes: - Spindle stroke drive (A) - Workpiece rotation (C) - Tool rotation (C2) - Radial axis (X) shank and tool table Max. Shaping spindle speed: 12 rpm Max. Table speed: 300 rpm Max. Table torque: 220 Nm Table bore: diameter 150 mm, depth 253 mm Free support diameter: 365 mm (4 T-slots, M12 threaded holes) Radial drive: Max. Feed speed: 3,000 mm/min COOLING AND LUBRICATION SYSTEM Coolant tank capacity: approx. 550 l Cutting wheel cooling lubricant delivery rate: approx. 150 l/min Magnetic chip conveyor: - Nominal width: 230 mm - Discharge height: approx. 900 mm Lubrication and hydraulic system Tank volume: approx. 160 l Number of pumps: 2 (lubrication, hydraulic and hydrostatic) POWER SUPPLY Operating voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Ihedovdtx Nepfx Ag Ujt Total connected load: approx. 25 kVA PROGRAMMING Standard dialog program: plain text operator guidance (German, English, Italian) Program functions: Single-cut cycle Multi-cut cycle (max. 3 cuts) Dimensional corrections Linear or degressive infeed EQUIPMENT 1 basic machine(s) AM 250 1 power clamping device 1 main column intermediate plate (150 mm high) 1 special ram head 0 - 110 mm stroke length 1 HSK-B80 tool holding cone 1 counter column with fixed counter support arm 1 counter column intermediate plate (100 mm high) 1 set of vibration isolators at no extra charge 1 Electronic handwheel 1 Extended software for fault diagnosis at no extra charge 1 Internet diagnostics system 1 Flow monitor 1 Flushing gun 1 150 mm diameter pipe socket 1 counterholder tip - rotating 1 draw tube and attachment bush AUTOMATION: 1 standard interface 1 Internal flushing of clamping top parts 1 Automatic loading door

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Ihsdpfx Agjl Nbqco Ust Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: new, Hydraulic workshop press LFSS Typ. DPM-K 1570/100 hydraulic workshop press with adjustable cylinder Technical specifications pressure 100 t stroke 300 mm table surface 1570 x 260 mm column passage between the guides 1570 mm infeed speed 8,0 mm/sec working speed 5,0 mm/sec Isdpfx Agsgipi Te Ujht retraction speed 10,0 mm/sec Motor power 5,5 kW Machine weight approx. 1580 kg. Space requirement approx. 2630 x 1000 x 2290 mm Equipment: hydraulic workshop press with adjustable cylinder table height adjustment V-block tool insert pressure gauge

Condition: used, machine/vehicle number: 11634, Rotor diameter: 600 mm Rotor width: 1000 mm 6-knife rotor - cross shear cutting rotor 2 stator knife rows Inlet cross section approx. 650 x 100 mm Drive motor 75 kW Iedpfeghgqdox Ag Uoht Machine features: The cross-shear cutting rotor ensures optimum material intake as well as distribution and thus high outputs with reduced energy consumption. Electro-hydraulic opening of the mill top and the screen basket. The sieve insert can be rotated 180° and reused after one-sided wear. Adjustment of the rotor knives outside the mill by means of an adjustment device reduces downtimes.

Condition: excellent (used), Year of construction: 2002, 1 1 output 3 kw Ihodpfx Asvwgt Tjg Uet weight 50 kg

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Number of chambers: 100 Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: automatic Closing: electro-hydraulic Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Ihodpfxoqa Dv Tj Ag Uot Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Year of construction: 2025, condition: new, Vertical filling machine for liquids into 3-side-seal- or pillow-bags. Including liquid dosing device (for high viscosity liquids). Twin filling layout for high capacity. Can be linked to CIP system to have an automatic circulating system to guarantee clean feeding pipes. The packaging material is sterilized by UV lights inside the machine to assure a clean environment for the packaging material and the liquid product. Contamination of the liquid product can be reduced during the packaging process to have a longer shelf life. - Specifications: max. speed of the machine in neutral: 100 cycles/minute; suitable for volumes from 200-1000ml; accuracy: +/- 1.5%; max. film width: 320mm; bag width: 100-160mm (depending on pouch type); bag length: 95-165mm; 0.7m³, 6bar; 380V, 3.9kW; machine dimensions: 1700x1100x2950mm; weight: 720kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Ihedov Nmznspfx Ag Ust Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, TECHNICAL DATA - Demonstration machine from showroom Roll carriage length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90° / 105 mm at 46° Cutting width width stop 1030 mm Saw blade max. Ø 450 mm Saw blade can be lowered under table Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus 750 x 655 mm Ihedpfx Asgz Hx Dsg Ust Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1051 kg TECHNICAL DESCRIPTION Solid German engineering For trimming, cutting to length, sizing, mitre cutting etc. Dimensionally stable and self-supporting machine body manufactured as a stable welded frame construction made of thick-walled steel profiles, laser-machined sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is mounted on the machine body The robust and powerful saw unit installed in the machine frame guarantees precise saw cuts The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the entire length, guided by hardened and and ground round steel guides with remote locking at 50 mm intervals Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening Extendable up to 250 mm on the wide side Length stop on the cross slide with mm scale and telescopic extension, extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre stop on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) are can be quickly set via a fixing system Width stop with cutting width 1030 mm to the right of the saw blade with fine adjustment, easy to adjust and fix manually, dimension display via easy-to-read mm measuring scale on adjustable ruler holder Table extension 1200 x 600 mm and table extension 750 x 655 mm Operation on the machine body with 4.3" touchscreen control for cutting height, swivel adjustment and speed Electromotive height and tilt adjustment via touch button Swivel range of the saw blade from 0° - 46 APA saw blade quick clamping system Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm can be lowered under the table Extraction nozzle Ø 120 mm on the machine body, Ø 80 mm on the protective hood Roller carriage, length and width stop profile anodized CE-compliant GS tested

Condition: new, Hydraulic workshop press LFSS Typ. DPM 1070/100 Technical specifications Pressure 100 t Ijdpjgipilsfx Ag Usht stroke 300 mm table area 1070 x 260 mm column passage between the guides 1070 mm infeed speed 8,0 mm/sec working speed 5,0 mm/sec retraction speed 10,0 mm/sec Motor power 5,5 kW Machine weight approx. 1400 kg. Space requirement approx. 2110 x 1000 x 2290 mm equipment: hydraulic workshop press table height adjustment V-block tool insert Pressure gauge

Condition: used, Year of construction: 1971, nominal power at 50% duty cycle: 100 kVA, Manufacturer: Nimak Type: NMP 7/100 Year of manufacture: 1971 Machine No.: 71059 Rated power: 100 kVA at 50% duty cycle Connected load: 175 kVA Primary voltage: 380V Open-circuit voltage: 7.3V Secondary current dd/max.: 8/33 kA Electrode force: 750 kp Frequency: 50 Hz Up to 8.8 V Ihodpfsw S Exuox Ag Uet At 6 bar Please submit inquiries only by email. All information has been provided to the best of our knowledge. Errors excepted. This offer is exclusively aimed at entrepreneurs as defined in § 14 BGB. Sale is made to the exclusion of all warranties. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the keywords "Imprint," "Terms and Conditions," and "Data Protection."

Year of construction: 2016, condition: new, Compact cell Fanuc ArcMate 100/7L with R30iB control , Lorch S3 pulse welder new Ijdpfoiamrrex Ag Ujht Number of axes: 6 Max. Load: 7Kg Max. Working range: approx. 1633 mm Year of construction: 2016 Table area 750x500mm each Total dimensions: approx:2500x1500x2200 Total weight: approx. 2000kg Net amount plus 19% VAT

Condition: used, Year of construction: 1994, Used premix BC – 10000 Lh Technical Overview: Isdpsvgubdofx Ag Ueht The used premix BC – 10000 Lh is configured as an industrial bottling unit created by BC in 1994, specifically the 10o model. This system is admirable given its production capacity of 10,000 L/h. It is underlined that the machine has been stored in conditions that allow its immediate operation. It can take place immediately following installation and proper assembly.  This used premix is actually located in the north of Italy. Operational and Maintenance Details of the Used premix BC – 10000 Lh: From an operational point of view, this used premix is presented disassembled. This indicates that the shipment of this machine will be fast. It is essential to note that technical manuals are available, an element that will significantly contribute to ordinary and extraordinary management and maintenance. These documents are indispensable resources to ensure the long-term operational efficiency of the system. Features of the CIP System: In terms of sanitization, the integrated CIP system is a crucial component of this used premix BC – 10000 Lh. This functionality is not an option but a necessity, given the importance of in-place cleaning in the bottling process to ensure compliance with sanitation standards. The effectiveness of this system directly influences the quality of the final product and the general efficiency of the production plant. Overall rating of the Used premix BC – 10000 Lh: In conclusion, the premix model 100 presents itself as a machine with robust specifications and a history of reliability. However, interested operators and organizations should proceed with a thorough assessment of their operational needs and compatibility with this specific bottling machine model. Considering its capabilities, the availability of manuals, and the CIP system, it is a unit that, despite its age, retains some value in the appropriate manufacturing context.

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm capacity at 50%:100 kVA pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m Ihsdpfx Aecxxwnsg Ujt spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off

Condition: excellent (used), Year of construction: 2015, Granulator / Knife mill brand INAN TECH Model: IM38/100 Rotor length: 1000 mm Rotor diameter: 380 mm Automatic waste feeding Ihodpfx Agjxgfqfs Uot

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Iodpfxorfx Utj Ag Ueht Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: ready for operation (used), Feed rate: 5-25m/min. Isdpohkdubjfx Ag Uoht