Used Hermle U 630 T for sale (117)

Condition: good (used), Year of construction: 1999, functionality: fully functional, Hermle C 600 V, year of manufacture 1999, Heidenhain TNC 430 control, travel X/Y/Z 600/450/450 mm, machine from first ownership, table size 800 x 465 mm, spindle speed up to 12,000 rpm, 30-position tool changer, SK 40 taper, 3D measuring probe, 9,400 spindle hours. Pgodpfey Ev Stex Amnjl

Condition: used, HERMLE B 300 is a 5‑axis machining center engineered for precision, high accuracy and production reliability. Working capacities: travels X 800 mm, Y 600 mm, Z 500 mm; table load max 250 kg; A‑axis ±110°; C‑axis 360°; max tool Ø 125 mm, tool length 300 mm, max tool weight 8 kg. Key specs: spindle taper HSK‑A63; spindle speed 20–15,000 rpm; spindle power 10 / 19 kW; rapid traverse 30 m/min; acceleration 5 m/s; max feed force 8,000 N; supply 3x400 V 50 Hz; total power 31 / 43 kVA; machine weight ≈ 8,500 kg. Equipment: 30‑position tool magazine, 1,000 L coolant system, BLUM tool breakage monitoring. Delivers tight tolerances; suited to automotive, watchmaking, aerospace, medical and toolmaking. Pedpfx Asyxnt Aemnogl

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C Pgodpfx Amoylw Stenjl • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hermle C 800 V vertical machining center was manufactured in 1996. It offers robust construction and precision for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 V machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Operating voltage: 400 v / 3-phase / 50 hz Pedpfx Amoyarzrenegl • Control voltage: 24 v • Total current: 44 a • Magazine for 30 tools, sk40. Extra Information Machine still under power

Condition: used, feed length X-axis: 430 mm, feed length Y-axis: 420 mm, feed length Z-axis: 230 mm, overall weight: 800 kg, FW 801 Conventional Milling Machine Technical data: x-travel: 430 mm y-travel: 420 mm z-travel: 230 mm Spindle taper ISO: SK40 Speed range: 40 - 2800 rpm Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Weight: approx. 800 kg Including the milling cutter shown. Inspection under power possible. Shipping available at extra cost. Pgedpfxey A Tlro Amnjl

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, overall weight: 12,500 kg, controller model: iTNC 530, rotational speed (max.): 18,000 rpm, General Data Measurements width 3970 mm Measurements depth 4629 mm Dqmcjh Measurements height 3050 mm Machine weight 12700 kg Main Drive Number of spindles 1 Spindle speed range 16000 rpm Spindle motor power 10 kW Tool taper SK 40 Number of axis 3 Movement X-Axis Movement 1200 mm Y-Axis Movement 900 mm Psdpfx Aovambiomnegl Z-Axis Movement 500 mm Table Outer length 1400 mm Outer width 900 mm This 3-axis HERMLE C 1200 V vertical machining centre was manufactured in 2003. It features a robust clamping table measuring 1400 x 900 mm and a high-performance milling spindle with a maximum power of 10 kW, torque up to 87 Nm, and speeds up to 16,000 RPM. Ideal for complex machining tasks, the HERMLE C 1200 V machine we have for sale offers precision and durability. Tool magazine can be dismantled so the width can be reduced to 2450 mm. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2000, Two Hermle C 800 V machining centres for sale. Hermle C 800 V Year of manufacture: 2000 Control: Heidenhain TNC 430 Technical specifications: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Table clamping surface: 1000 x 560 mm Max. table load: 1000 kg Distance spindle/table: 100–500 mm Spindle speed: 8000 rpm Podpfoylkzzsx Amnsgl SK40 30 tool changer positions

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Internal coolant supply 40 bar Chip conveyor Pedpfx Ameynw Ersnogl Heidenhain measuring probe Blum laser system

Condition: excellent (used), Year of construction: 2006, operating hours: 10,000 h, functionality: fully functional, NEW ARRIVAL 1 CNC MILLING MACHINE HERMLE C 600V Year 2006 CNC CONTROL HEIDENHAIN ITNC 530 TRAVEL DISTANCES 600 x 450 x 450 mm - INFINITELY VARIABLE SPINDLE SPEEDS UP TO 10,000 RPM - MACHINE WITH ELECTRONIC HANDWHEEL - PROBE - APPROX. 30 TOOL HOLDERS - COOLANT SYSTEM - FIXED TABLE, ETC. PRICE ON REQUEST Plus 19% VAT, ex location, unpacked, uninsured - EXW Technical data as per attachment non-binding - errors and prior sale reserved. Delivery time: immediate - subject to prior sale. Payment: immediately upon receipt of invoice, net - prior to removal/collection. Pgodpfjxf Huvsx Amnsl We will be happy to demonstrate the machine to you under power, by appointment.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 2,466 h, functionality: fully functional, machine/vehicle number: 13147, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 560 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle Speed range: 20 – 12,000 rpm Tool holder: SK40 Table Dimensions: 1,000 x 560 mm Tool magazine: 30 positions MACHINE DETAILS Weight: 7,000 kg Spindle hours: 2,466 h Machine operating hours: 34,485 h Power: 15 kW (at 40% duty cycle) Frequency: 50 Hz Operating voltage: 400 V Control voltage: 24 V Psdpfx Amow Nqh Aonegl Total rated current: 44 A EQUIPMENT Chip tray Heidenhain TNC430 control Heidenhain touch probe system Extraction unit Electronic handwheel

Condition: ready for operation (used), Year of construction: 1999, Make: HERMLE Type of machine: C 800 V Year of manufacture: 1999 Control system: Heidenhain 430 Machine's weight: 7000 kg Tool holder: SK 40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Pgjdpfjyfgtaox Amnjl Speed range: 8 000 min⁻¹ Table dimensions: 1000 × 560 mm Number of tools in the magazine: 30 Pl.

Condition: good (used), Hermle Centrifuge Z 200 A Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A takes up to 12 x 15 ml tubes with conical and round bottom. Specifications . Volume: max. 12 x 15 ml / 6 x 50 ml. Speed: max. speed/RCF: 6000 rpm / 4185 xg min. Speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: knob-controlled in 250 rpm steps Speed display: preset and actual speed - digital Running time: max. time: 30 min. / continuous run min. time: 0.5 min. Preselection: 0.5 - 30 min. / "Contin. Time setting: by push-button 0.5 min. increments Time display: remaining time - digital Brake: fixed braking force with soft stop Features: microprocessor-controlled - Microprocessor-controlled - DC motor, covered - ABS plastic housing shock and chemical resistant Safety: - Lid locking system - automatic unbalance indicator with safety cut-off - manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inch): Width: 28 / 11.0 height: 26 / 10,2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Pgodem Albdspfx Amnol Power consumption: 180 W Item condition: used, top condition You can find more centrifuges - new and used - in our shop! International shipping costs on request!

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 12644, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Bids are binding and require timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel distances Travel distance X-axis: 1,200 mm Travel distance Y-axis: 900 mm Travel distance Z-axis: 500 mm Spindle Minimum distance from working spindle to top edge of table: 180 mm Maximum distance from working spindle to top edge of table: 680 mm Milling spindle diameter at front bearing: 70 mm Spindle speed: 15,000 rpm Tool holder: HSK A63 Feed Feed rate X-axis: 1 – 3,000 mm/min Feed rate Y-axis: 1 – 3,000 mm/min Feed rate Z-axis: 1 – 3,000 mm/min Work table Table dimensions: 1,400 x 900 mm Number of T-slots: 14 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 31 A Connected load: 45 kVA Dimensions & weight Dimensions (L x W x H): 6,000 x 3,200 x 2,900 mm Weight: 12,000 kg EQUIPMENT 30-position tool changer Measuring probe Tool holders in the tool changer Note: Transport can be carried out on a truck up to 3,000 mm width. Pgodpfxjxqfzrs Amnsl

Year of construction: 1969, condition: used, machine/vehicle number: 304, Manufacturer: Hermle Model : FW 800 Machine No. : 304 Year of manufacture: 1969 Weight: approx. 1000 KG General / technical data: well preserved used horizontal milling machine with hydraulic program control (cam control bar) for automatic production process. admission: SK 30 travel: X 400mm Y 370mm Z 165mm Speed: 18 pieces mechanically switched in 2 motor steps 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 100, 1210, 1420, 1780, 2030, and 3050 rpm feeds: in X and y axis stepless hydraulic in z ( horizontal milling spindle) manual table dimensions (rigid table): 800mm x 220mm power supply / spindle motor power: 380Volt 50 HZ / 1,5 KW approx. space requirement of the machine: 1900mm x 1100mm x 1700mm (bxtxh) Accessories / special equipment: - Rigid fraestable - Item various tool holders - spittoon - cooling device - Machine documentation with program instructions Remarks The machine is in a very good condition according to its age. The machine is preferably designed for the production of small and medium series. The machine has a simple hydraulic program control controlled by a cam switch. Podsdgrwdopfx Amnsgl

Condition: ready for operation (used), Year of construction: 1999, operating hours: 26,863 h, functionality: fully functional, machine/vehicle number: 12803, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: HEIDENHAIN TNC 430, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding constitutes an obligation for timely collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Pgodexnkfkopfx Amnel Travels Travel X: 600 mm Travel Y: 450 mm Travel Z: 450 mm Feed range in X: 1–2,000/3,0000 mm/min Feed range in Y: 1–2,000/3,0000 mm/min Feed range in Z: 1–2,000/3,0000 mm/min Rapid traverse in X axis: 35 m/min Rapid traverse in Y axis: 35 m/min Rapid traverse in Z axis: 35 m/min Clamping table surface: 800 x 465 mm Max. spindle speed: 12,000 rpm Measuring system resolution: 0.1 µm Input unit measuring system: 0.1 µm Display increment measuring system: 0.1 µm MACHINE DETAILS CNC control: HEIDENHAIN TNC 430 Dimensions & Weight Dimensions (L x W x H): 2800 x 2100 x 2700 mm Weight: 6,700 kg Operating hours Spindle hours: 26,863 h CNC controller operation hours: 81,084 h EQUIPMENT Individual feed motors for each axis – three-phase (brushless) Note: The clamping devices (vices, chucks, etc.) mounted on the worktable are not included in the scope of sale or delivery. The machine is offered without tool holders and tools.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 20,222 h, functionality: fully functional, machine/vehicle number: 14631, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, spindle diameter: 70 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the period from 01/12/2025 to 05/12/2025! Pgodpoxnkwgjfx Amnel TECHNICAL DETAILS Travel distances Travel range X-axis: 800 mm Travel range Y-axis: 600 mm Travel range Z-axis: 500 mm Rapid traverse in X, Y, and Z axes: 35 m/min Max. spindle speed: 16,000 rpm Clamping table surface: 1,000 x 560 mm Spindle taper: HSK A63 (DIN 69063) Spindle diameter at front bearing: 70 mm MACHINE DETAILS Control: HEIDENHAIN TNC 430 Dimensions & Weight Dimensions (L x W x H): 3,300 x 2,400 x 3,000 mm Weight: 7,000 kg Coolant tank capacity: 300 l Operating hours Spindle hours: 20,222 h Power-on hours: 49,977 h EQUIPMENT 3D probing system Technical documentation Note: The mounting plate currently fixed on the worktable, as well as tool holders and tools, are not included in the scope of delivery or sale.

Condition: new, Year of construction: 2025, operating hours: 671 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: Heidenhain TNC7, workpiece weight (max.): 1,100 kg, table width: 800 mm, table length: 616 mm, rotational speed (min.): 20 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Heidenhain TNC7 Spindle HSK-A63 16,000 rpm 30 tool positions Rigid clamping table 800x616 Internal coolant supply 40 bar with paper band filter Scraper belt conveyor Handwheel BLUM LC53-Digilog for tool breakage detection/measurement Touch probe BLUM TC Machine ON: 671 h Spindle ON: 61 h Machine is approx. 6 months old. Psdpeyf E Atjfx Amnjgl Offered for sale on behalf of customer. Inspection possible by prior arrangement.