Used Hermle C600 for sale (161)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 48,702 h, functionality: fully functional, machine/vehicle number: 16261, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik 840 D pl , spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Phodjxbz A Hspfx Aa Eja Travel Paths X-axis travel: 650 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Main Spindle Spindle speed range: 20 – 28,000 rpm Spindle drive power: 23 / 18 kW Max. torque: 79 Nm Tool taper: HSK-A63 NC Rotary Swivel Table Clamping surface: Ø 630 mm Swivel range A: +30° / -115° Rotatable C: 360° Max. table load: 500 kg Max. workpiece dimensions: Ø 630 x 313 mm Table rotation speed A: 25 / C: 65 rpm Tool Changer Number of tool stations: 117 Max. tool diameter: 90 mm Max. tool length: 300 mm Feed Rates Rapid traverse (X / Y / Z): 60 m/min Acceleration: 10 m/s² Feed force: 8.5 kN MACHINE DETAILS Control: Siemens Sinumerik 840 D pl Space Requirement & Weight Required space approx.: 8.5 x 5.5 x 3.0 m Machine weight approx.: 10,500 kg Total power requirement: 43 kVA Operating hours: 48,702 h EQUIPMENT - Documentation - High-pressure cooling - Coolant system - Internal coolant supply: 80 bar / 1,300 l - Electronic handwheel - Fully enclosed cabin - FASTEMS pallet pool / 15 positions - Chip conveyor - Paper band filter - Renishaw probe - Tool breakage monitoring Note: Transport lifting gear must be provided by the buyer. The pallet system cannot be observed under power. The Fastems controller is defective.

Condition: excellent (used), HEIDENHAIN TNC430 with B + C axis Working travels 800 x 600 x 500 mm Table size Ø 280 mm Table swivelling +/-110° Table rotating 360° Spindle taper HSK63 Spindle speeds -15'000 rpm tool changer 30 pos. Coolant through spindle 3D tracer Renishaw Pedpfjk Dz Ngex Aa Eeha MARCELS MASCHINEN CH

Condition: used, Year of construction: 1984, x-travel 410 mm y-travel 310 mm z-travel 400 mm table-size 700 x 280 mm control Heidenhain TNC 145 tool adaptor SK40 turning speed range 40- 2.000 U/min rapid speed 1,5 m/min feed speeds 1500 mm/min power requirement 2.2 kW quill stroke 63 mm weight 1,3 t total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions 1,4 x 2,1 x 2,0 m Features: - New TFT screen - Coolant system - Hydraulic tool clamping Psdsxlufpspfx Aa Ejha - Milling head with spindle sleeve - Documentation

Condition: good (used), Year of construction: 2001, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 1,000 kg, Equipment: chip conveyor, TECHNICAL MACHINE BENEFITS: - RAPID TRAVERSE IN ALL AXES 30 M/MIN - CHIP-TO-CHIP TIME 6.5 S - NC SWIVEL ROTARY TABLE - CLAMPING SURFACE: Ø 800 MM - SWIVEL RANGE: +15°/-97° - SPEED DRIVE POWER/TORQUE/TOOL CONSUMPTION - 10000 1/MIN 25 KW/159 NM (40% ED) / SK 40/HSK A 63 - 16000* 1/MIN 15 KW/130 NM (40% ED) / SK 40/HSK A 63 - 24000* 1/MIN 23 KW/79 NM (40% ED) / HSK A 63 - 30 SEATS QUALITATIVE MACHINE BENEFITS: - INTERNAL COOLANT SUPPLY 40 BAR - HEIDENHAIN MEASURING PROBE WITH RADIO - ELECTRIC HEAT COMPENSATION - ELECTRONIC MANUAL CONTROL MODULE - OIL MIST EXTRACTION - CHIP CLEANING GUN - BLOW-OFF DEVICE - SEALING AIR FOR STANDARDS - A AXIS +15º / -97º C AXIS 360º Phedpfx Aajv Hxifs Esa - C AXIS 360º

Condition: used, CNC universal tool milling machine HERMLE type UWF 900 E Machine No. 10829, Year of manufacture 1995 CNC contouring control Heidenhain TNC 415 B NC software 280540, PLC software 277677 06 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 458 mm Spindle mount ISO 40 Distance table to spindle nose 40 to 440 mm Spindle speed 20 - 4000 rpm, continuously variable Feed rate 1 to 3000 mm/min Rapid traverse X and Y = 7 m/min. Z = 6 m/min. Spindle drive 7 kW Quill stroke (vertical head) 60 mm - Spindle speed via 2 gear stages and continuously variable via frequency converter - Hydro-mechanical tool clamping vertically and horizontally - Thread cutting without compensating chuck - Electronic handwheel - RENISHAW 3D scanning head - Coolant system adjacent, capacity approx. 130 liters - Automatic central lubrication system - Fixed angle table - Fully protective cabin - 32,279 recorded spindle operating hours Podpjwaaqiefx Aa Esha - Pivoting control panel - Operating instructions and electrical diagram Space requirements L x W x H 2700 x 3500 x 2100 mm Weight 3 tons.

Condition: good (used), Year of construction: 1991, Travel range: X= 600, Y= 400, Z= 420 mm Pedpfx Aswvif Uea Ejha Speed range: 20 – 4000 rpm Gear stages: 3 Spindle taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, measuring probe (defective)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 6,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, This listing is exclusively for a robotic cell that originally serviced two Hermle C40U machines. Only the robotic cell is for sale, without any machines. This is ideal for retrofitting automation onto existing machines or as a source for spare parts. - Year of manufacture: 2008, KUKA robot KR210-2 2000, maximum pallet weight 200 kg - Controller: KRC 2 - Designed for pallet handling, not for individual parts - Rack with 51 pallet positions - Setup station - Configured for two machines - Scope of supply: Robotic cell with KUKA robot, controller and KPC2 panel, 16 matching pallets, and adapter plates for integration with machines Pjdpfx Ajw Sdc Ssa Eoha Very well maintained condition The robot was fully functional until it was dismantled. Note: The robotic cell is immediately available.

Condition: excellent (used), Year of construction: 2006, Opportunity to purchase this outstanding 5-axis HERMLE C30U including RS automation, an additional tool magazine ZM157 and multiple pallets. Available for immediate delivery and can be inspected in operation upon appointment. More information on request. Control HEIDENHAIN iTNC 530 X-axis travel 650 mm Y-axis travel 600 mm Z-axis travel 500 mm Spindle speed range 18000 rpm 1/MIN Spindle hours 54225h Tool taper SK 40 Tool Magazine Additional magazine ZM157 (157 positions) Nc swivel rotary table diameter 280 mm Features: Phsdpfxsxbr Rhs Aa Esa Tool Breakage/Measurement: BLUM tool breakage/measurement Measuring Probe: Heidenhain Event Messenger: Available Electrical Heat Compensation: Provided External Blowing Air: Provided Oil Mist Extraction: Provided Chip Trolley: 450 liters Rotating Transparent Window: Available Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex Table axis: a-axis off-center Table specification: 6-way rotary feed through Internal coolant supply: 80 Filter: paper belt filter Conveyor: scraper belt conveyor Automatic cabin door: yes Polycarbonate safety glass: windows Frequency: 50 hz Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg Phedoflrg Tepfx Aa Eja

Condition: good (used), Year of construction: 2005, functionality: fully functional, The machine is in good technical condition; inspection under power is possible by arrangement. Video available. Technical specifications: Working table length: 900 mm Working table width: 500 mm Maximum table load: 500 kg Spindle drive power: 32 kW Number of tools in magazine: 28 pcs Maximum spindle speed: 12,000 rpm X-axis travel: 740 mm Y-axis travel: 500 mm Podpfjxxmr Iex Aa Ejha Z-axis travel: 500 mm Machine height: 2,400 mm Machine width: 2,500 mm Weight: 7.3 t

Condition: used, Hermle H 2 milling machine with accessories Phsdpfx Asugv Nwja Eja

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Contour Control – Excellent Condition!! Phsdpsw Sv Iajfx Aa Eja Technical Data: - Year of manufacture: approx. 1994, Machine No. 10525 - Fixed angle table - Spindle speed: 17 to 3550 rpm - Infinitely variable feed in 3 axes from 0 to 1600 mm/min - Drive output: 6 kW - Travel X/Y/Z: 500/430/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 1,800 kg - Dimensions (LxWxH): 1.8 m x 1.8 m x 1.9 m Accessories and Equipment: - HS 401 contour control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples About the Machine: For sale is a Hermle UWF 802M tool milling machine with HS401 contour control. This universal milling machine is in excellent condition. The contour control is very easy to operate, allowing for length and radius compensation within the program. No advanced CNC knowledge is required. Of course, the Hermle can also be operated manually without the control system. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically inspected by us. Take the opportunity to view and test the Hermle under power at our premises.

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit Phjdpoxcp Slofx Aa Eja - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 2,466 h, functionality: fully functional, machine/vehicle number: 13147, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 560 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle Speed range: 20 – 12,000 rpm Tool holder: SK40 Table Dimensions: 1,000 x 560 mm Tool magazine: 30 positions MACHINE DETAILS Weight: 7,000 kg Spindle hours: 2,466 h Machine operating hours: 34,485 h Power: 15 kW (at 40% duty cycle) Pedpfx Ajw Nqh Aja Eoha Frequency: 50 Hz Operating voltage: 400 V Control voltage: 24 V Total rated current: 44 A EQUIPMENT Chip tray Heidenhain TNC430 control Heidenhain touch probe system Extraction unit Electronic handwheel

Condition: not inspected (used), x-travel 850 mm y-travel 440 mm z-travel / mm Phsdpfeud Illox Aa Esa Control TNC 355C

Condition: good (used), BHG Hermle CNC milling machine Type: UWF 1000 Control: Heidenhain TNC 355 X-path: 700 mm Y-path: 550 mm Z-path: 500 mm Bed: 490 x 1000 mm Spindle: ISO 40 Speed: 3150 rpm Phjdpjqwgzbsfx Aa Eea Year of manufacture: 1988 Including documentation and parameters Dimensions: 230x200x220 cm LxWxH Weight: approx. 4000 KG

Condition: used, Year of construction: 1986, x-travel 390/410 mm y-travel 290/310 mm z-travel 380/400 mm total power requirement 4 kW weight of the machine ca. 1,25 t dimensions of the machine ca. 2100x2100x1700 m Phedpfjvylkcjx Aa Eea technical data please see attachment!

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, table width: 520 mm, table length: 900 mm, overall weight: 4,500 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Table size: 900 x 520 mm MACHINE DETAILS Control: Heidenhain Installation dimensions LxWxH: 3.16 x 3.62 x 2.37 m Phsdpfx Ajxl Sy Dea Eea Weight: 6,000 kg Electrical data Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total rated current: 23 A Total power: 16 kVA Weight: 4,500 kg

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door Podpfx Aoxcp Srja Eoha - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 800mm/600mm/500mm, tool holder: HSK63, spindle speed: 12000rpm, tool positions: 87, control: Heidenhain iTNC530, spindle hours: 18706h. 3-axis robot System 3R WorkPal 1 Macro, year of manufacture: 2014, transfer weight: 50kg, stroke: 1450mm, pallet positions: 60. Including Renishaw laser tool breakage detection, Renishaw digital 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Pedpjxg Rh Nsfx Aa Eoha

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,249 h, functionality: fully functional, machine/vehicle number: 15137, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, table width: 800 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 28, Well-maintained machine with a spindle from 2022 TECHNICAL DETAILS Longitudinal travel (X): 1,000 mm Transverse travel (Y, slide): 630 mm Vertical travel (Z, milling head): 550 mm Control: Heidenhain TNC 430 C-axis: Full-featured A-head: Manually swivelable to 0° and 90° Spindle Spindle speed (max.): 7,000 rpm Spindle type: Geared spindle with high torque in the lower speed range Special feature: Suitable for M30 synchronous thread cutting Spindle head swivel (manual): ±90° Milling spindle diameter in the front bearing horizontal/vertical: 80 / 55 mm Tool changer: 28-station Working area Milling spindle vertical - Distance from milling spindle to top edge of rotary table: 130 - 680 mm Milling spindle horizontal - Milling spindle to the rotary axis of the milling head, rotary table: 140 - 690 mm Milling spindle vertical/horizontal - Distance from the milling spindle axis to the rotary axis of the milling head: 120/110 mm NC rotary table 4th axis: Ø 800 mm Phjdpfx Aowmm D Nsa Eea Condition & Maintenance Spindle: renewed 2022 Maintenance: carried out regularly Geometry: laser measured 2022 Tool changer: lifting unit recently replaced Maintenance reports: available MACHINE DETAILS Control on: 35,165 h Machine on: 21,574 h Program run: 11,750 h Spindle on: 10,249 h Axes in motion: 10,285 h Weight: 6,500 kg Rated power (apparent power): 17 kVA Input current: three-phase EQUIPMENT - Documentation and manual - Chip conveyor - A-head with manual tilt function to 0° and 90° - Tool changer with new lifting unit - Spindle with high performance in the lower speed range, suitable for M30 synchronous threads - Maintenance and geometry reports available

Condition: good (used), Hermle Centrifuge Z 200 A Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A takes up to 12 x 15 ml tubes with conical and round bottom. Specifications . Volume: max. 12 x 15 ml / 6 x 50 ml. Speed: max. speed/RCF: 6000 rpm / 4185 xg min. Speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: knob-controlled in 250 rpm steps Speed display: preset and actual speed - digital Running time: max. time: 30 min. / continuous run min. time: 0.5 min. Preselection: 0.5 - 30 min. / "Contin. Time setting: by push-button 0.5 min. increments Time display: remaining time - digital Brake: fixed braking force with soft stop Features: microprocessor-controlled - Microprocessor-controlled - DC motor, covered - ABS plastic housing shock and chemical resistant Safety: - Lid locking system - automatic unbalance indicator with safety cut-off - manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inch): Width: 28 / 11.0 height: 26 / 10,2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Item condition: used, top condition You can find more centrifuges - new and used - in our shop! International shipping costs on request! Phjdjm Albdspfx Aa Eoa

Condition: used, x-travel 600 mm y-travel 400 mm z-travel 400 mm Control Digitalanzeige Heidenhain turning speed range 45 - 2000 U/min feed range 0 - 3000 mm/min tool taper SK 40 Phsdpfx Aasvx U Dce Esa weight of the machine ca. 2 t universal rotary tilting table diverse toolholders

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller manufacturer: Heidenhain, table width: 480 mm, table length: 900 mm, overall weight: 7,300 kg, Equipment: documentation/manual, TECHNICAL DETAILS Fixed table: 900 x 480 mm MACHINE DETAILS Control: HEIDENHAIN Electrical Data Net weight: 7,300 kg Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total power: 26 kVA Total rated current: 37 A Weight: 6,300 kg EQUIPMENT Psdpfx Aaexl Sunj Eeha Tool changer

Condition: good (used), Year of construction: 2004, operating hours: 77,711 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Heidenhain iTNC530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 77,711 h | Spindle ON: 16,294 h - Spindle HSK-A63, 10,000 rpm - 32 tool positions - Rotary table SRT 280 mm with integrated clamping system SK50 (can be closed off if not needed or converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door Pjdpfxsxcp R Ie Aa Eeha - 32 tool positions plus 87 additional positions (ZM87) - Thermal compensation - BLUM tool measurement (probe on machine column) - Renishaw measuring probe - Chip container - Status beacon The machine has been thoroughly inspected; a geometry protocol and circularity test measurements are available. The machine can be viewed and tested under power at any time. Very well-maintained condition.