Used Height Gauge for sale (36,401)

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2024, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total length: 11,520 mm, Equipment: ABS, Very well-maintained, absolutely clean Stahl-FerroStar FSS steel tipper. Hardox tipper body HB450 Side walls 4/3mm HB 450 Approx. 55 m³ Fifth wheel height 1,150 mm SAF axles with disc brakes Lift axle Alcoa DB aluminum rims Wing doors with grain slide Roll-up tarpaulin Platform Aluminum side supports Smart Board Loading pressure gauge Storage box Ladder 2 air vibrators etc. Gbedpfoz Id Aysx Aikew Further information available upon request.

Condition: new, Year of construction: 2026, Spindle speed, continuously variable, electronic: 40-4000 rpm Spindle: MK 2 Table height adjustment with rack and pinion Thread cutting capacity, max: M12 Adjustment of thread cutting depth via digital depth gauge Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment with rack and pinion Continuous/normal drilling capacity in steel: Ø 15 mm / 18 mm Drilling depth: 70 mm Overhang: 220 mm Column diameter: 70 mm Usable table area (W x L): 300 x 250 mm Machine dimensions (W x D x H): 420 x 520 x 850 mm Weight: 65 kg Max. distance spindle/table/base: 300/370/420 mm Motor: AC with frequency converter, 230 V, 0.54 kW OPTION: Drilling package 2 (No. 296591) - Vice, Felix 80 - Quick-change drill chuck B16, 1-13 mm - Tapered shank B16 / MKII - Reducer sleeve MKII / MKI Price: €315 Factory warranty: 3 years Godpfxsig H Rdj Aikobw Free delivery, including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Spindle speed, stepless electronic control: 40-4000 rpm Spindle mount: MK 2 Table height adjustment with rack and pinion Thread cutting capacity, max: M10 Adjustment of thread cutting depth via digital depth gauge Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment with rack and pinion Continuous/normal drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Overhang: 225 mm Column diameter: 60 mm Usable table area (W x L): 330x250 mm Machine dimensions (W x D x H): 420x450x860 mm Machine dimensions (with base): (W x D x H): 452x700x1130 mm Weight: 62 kg Max. distance spindle/table/base: 300/360 mm Motor: AC with frequency inverter, 230 V, 0.54 kW OPTION: Drilling kit no. 2 - Felix vise, jaw width 80, clamping range max. 120 mm - Quick-change drill chuck 1-13 mm, mount B16 - Taper shank MK II/B16 Godpfsby Swhsx Aikebw - Reducing sleeve MK II/MK I Price: € 320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 2025, condition: new, Vacuum lifter BARBARIC, swiveling, including column-mounted slewing crane Equipment package consisting of: - Vacuum lifter uniWood B3-90° - 250 Comfort version, with integrated chain hoist reinforced, lifting capacity: 250 kg Suitable for vertical and horizontal transport of flat, commercially available panels. Vacuum generation is achieved pneumatically via an ejector. For lifting porous materials (MDF with a thickness of more than 8 mm), a reinforced vacuum pump is installed. -- Technical data -- Lifting speed of chain hoist: 0-10 m/min infinitely variable via frequency inverter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: approx. 85 kg -- Safety system -- The lifter is equipped with a vacuum pressure gauge. Releasing the load using a 2-button function. - Column-mounted slewing crane BARBARIC Load capacity 250 kg on the lifting device Consisting of: Column, console and low-friction jib. Delivery including sliding carriage and power supply. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Outreach: 5 m Slewing range approx. 250° Gbedpfec Umftjx Aikjw Manual slewing and trolley movement Base plate with 700 x 700 mm and fastening material. Delivery with adhesive anchor for concrete floor. A suitably reinforced concrete floor is required for this fastening. The static verification of the floor must be carried out on site and documented accordingly. Other versions and lengths available upon request.

Condition: new, Press force: 300 t Bending length: 4000 mm Distance between uprights: 3250 mm Overhang: 400 mm Installation height: 590 mm Stroke: 220 mm Return stroke speed: 80 mm/s Working speed: 8 mm/s Retraction speed: 80 mm/s Drive power: 22 kW Dimensions L x W x H: approx. 4150 x 1850 x 3100 mm Weight: approx. 20,000 kg Accessories / Special features: • CNC control Cybelec Cybtouch 12 P for Y1, Y2, X + automatic crowning o Simple operation, more efficient bending, and powerful functions o Touchscreen with bright colors • 5 x 800 mm upper tool PM 1, slightly bent, R=0.8 mm, pressure load 100 t/m, tip 88° • Universal die 95 x 95 mm with multiple V-openings • Laser safety curtain FISSLER on the right and left on the front side panels • Automatic hydraulic crowning device in the lower beam • Back gauge with linear guides • 3 front support arms Gjdpfxsgiudxj Aikebw • Foot pedal • Painting: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 • Operating manual • CE conformity Delivery time: approx. 2-3 months after receipt of order plus pre-carriage costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Technical details: Length: 1000 mm width: 630 mm height: 40 mm height over floor: 680 mm weight of the machine approx.: ca.250 kg space requirements of the machine approx.: L:1,0xB:0,63xH:0,68 m Measurement and Controlling Plate Gbsdpfsu Nki Tex Aikew material made of special cast with steel supplement surface scraped & surface-gauged 3 single column made of cast iron with steel ball inserts and adjustment thread *

Condition: excellent (used), Universal tool grinder Michael Deckel S11 with accessories and tool cabinet in very good condition !!! Technical data: >> Year of construction 1986 >> serial no. 759 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. Tool diameter between the centers 130mm >> Max. Max. tool diameter with flying clamping in the universal dividing head 620mm >> Max. Tool lengths between centers 270mm >> T-slot machine stand 12mm >> T-slot grinding head, tool slide and accessories 8mm Movement range: >> Working paths Sanding stroke 190mm Grinding stroke for swirl grinding 190mm Cross adjustment of tool slide 100mm Vertical adjustment of grinding head 325mm Longitudinal adjustment of grinding spindle 5mm >> Rough adjustment travel Tool carrier 220mm Grinding head support 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head support 360 degrees Godpfx Aijqd N S Dekebw Grinding head 360 degrees Tool carrier 360 degrees Grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speeds, infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter 125mm Max. Cutting wheel diameter 200mm Dimensions: Weight 520 kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2.5 x 2.3 m Accessories and equipment: 1 tool cabinet with the following contents: >> Universal dividing head SK40 >> Twist and relief grinding device >> SK40 radius grinding device >> Tailstock >> Swivel support finger >> Machine vice >> Sk 40 tool holders >> Measuring holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutter >> Tooth supports >> Indexing head >> Protective covers >> 1 set of collets as good as new from 1 to 17.5 mm 0.5 mm increasing >> Grinding wheel holders >> various grinding wheels >> dividing wheels >> suction device with vacuum cleaner >> various holders and much more (as shown in the pictures) About the machine : We are offering a Michael Deckel S11 universal tool grinding machine. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly quickly, economically and flexibly with maximum ease of use. The Deckel S11 is in very good condition and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: new, pressure 100 t stroke 380 mm table surface area Arbeitsbreite 1100 mm pressure 258 bar Gedpfx Aoi A S I Soikjbw oil volume 46 dm³ ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec total power requirement 2,2 kW weight of the machine ca. 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Sheet metal width: 2,000 mm Sheet metal thickness for St 42: 16 mm Passage width: 2,250 mm Overhang: 600 mm Knife and cutting Knife length: 2,005 mm Cutting gap adjustment: 0.05–0.95 mm Cutting angle: 1° 40′ Clamping beam: 10 pcs. Back gauge Gauge length: 1,000 mm Back gauge adjustment: 10–1,000 mm Work table Table size: 2,500 × 700 mm Table height above floor: 800 mm Hydraulics and Electrics Oil volume: 900 l Operating voltage: 380 V Machine data Godpfx Aioz S Ng Hokebw Machine weight: approx. 10 t Space requirement: approx. 3 × 2.3 × 2.3 m EQUIPMENT Foot switch Supports Spare knife

Condition: new, overall weight: 43,500 kg, axle configuration: > 3 axles, Year of construction: 2025, Equipment: ABS, GVN 4GVN O4 OVERWIDTH PLATE KOC LIFT HYDRAULIC RAMP ? ----VEHICLE HISTORY * NEW VEHICLE 09/2025 * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT EQUIPMENT AND STRUCTURE * SPARE WHEEL * FRONT STORAGE COMPARTMENT * FRONT STORAGE COMPARTMENT UNDER THE GOOSENECK * STORAGE BOXES ON BOTH SIDES * FIRE EXTINGUISHER HOLDER * LOADING AREA ON THE GOOSENECK * EXTENDABLE PLATE FOR OVERWIDTH * OVERWIDTH SILL * OVERWIDTH WARNING SIGN 4X * MOUNTING POINTS * ADDITIONAL SUPPORTS * PERMANENTLY MOUNTED HYDRAULIC RAMP * POWER CONNECTION FOR HYDRAULIC RAMP * TRAILER LIGHT SYSTEMS * PRESSURE GAUGE ----CHASSIS AND AXLES * OSMAN KOC AXLES, SIMILAR TO BPW AXLES * 4 AXLES * LIFT AXLE 1 AXLE * LOCKABLE STEERING AXLE LAST AXLE * FULL AIR SUSPENSION * DRUM BRAKE * WABCO BRAKE SYSTEM ----TIRES * ALL TIRES * 235/75 R17.5 ----DIMENSIONS * LOADING AREA DIMENSIONS * 9.55 M L 2.55 M W 3 M W WITH OVERWIDTH * RAMP LENGTH * 3.23 M L 0.75 M W * LOADING AREA DIMENSIONS OVER GOOSENECK * 1.8 M L 2.4 M W * GOOSENECK HEIGHT FROM GROUND * 1.4 M H * LOADING AREA HEIGHT FROM GROUND * 0.9 M H * TOTAL LENGTH WITHOUT RAMPS * 13.6 M L ---- IMMEDIATELY READY FOR USE ---- * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2000€ ----EXPORT REGISTRATION, CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER), 5 DAYS, 30 DAYS LICENSE PLATES, 17 - 21 DAYS AUSTRIA LICENSE PLATES EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! A deposit of at least €500.00 / €1,000.00 will be charged for sales to EU and non-EU countries. Changes, errors and prior sale are subject to change! You can find more vehicles on our homepage: Gsdsxpzr Dspfx Aikobw Sales are made exclusively according to our general terms and conditions - see homepage. Important note - Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder Gbedpfsxaayhsx Aikow - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: as good as new (ex-display), Year of construction: 2023, sheet width 1050 mm plate thickness 1.50 mm daylight opening 100 mm bending angle max. 135 ° height OW 100 mm total power requirement manuell Gbsdpfxexaa T Uo Aikew weight of the machine ca. 330 kg. dimensions of the machine ca. 1600 x 900 x 1450 mm Exhibition machine from 2023 only 2x machines in stock special price on request Features: - robust, manual folding machine - split upper, lower and rear tool * Height of upper tool = 100 mm * Pitch 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100 * Left right with horn tool - Upper tool with quick-change system - Quick foot clamping - Angle fence - lockable - Manual back gauge 500 mm - Machine can be moved (rollers) - Accessory box - rear * Pictures show identical machine (UFA 1212)

Condition: good (used), functionality: fully functional, Year of construction: 2006, AMADA HFT 50-20 – Technical Specifications AMADA HFT 50-20 Specification Details Manufacturer: AMADA Model: HFT 50-20 Gbjde Abn A Ropfx Aiksw Year of Manufacture: 2006 Condition: Used Machine Type: CNC Hydraulic Press Brake CNC Control: AMADA CD2005 Pressing Force: 50 t Maximum Bending Length: 2,085 mm Distance Between Frames: 2,665 mm Throat Depth: 420 mm Stroke: 200 mm Number of Controlled Axes: 4 Installation Height: 470 mm Working Speed: 1–10 mm/s Return Speed: 1–100 mm/s Motor Power: 6 kW Maximum Hydraulic Pressure: 270 bar Oil Capacity: 55 l Rear Back Gauge: Type A Table Width: 60 mm Table Height: 960 mm Power Supply: 400 V / 50 Hz Overall Dimensions (L × W × H): 2,950 × 1,580 × 2,450 mm Width incl. Control Panel: 1,820 mm Machine Weight: 4,850 kg AMADA HFT 50-20, 2006. Bending length 2080 mm (50 t), 4 controlled axes, stroke 200 mm and weight approximately 4.85 tons.

Condition: ready for operation (used), Year of construction: 2007, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, pressing force: 28 t, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! Gbedpfxezzkwgj Aikjw TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping (top) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 560 mm, insertion height: 80 mm, table height: 900 mm, cutting length (max.): 560 mm, overall weight: 575 kg, type of input current: three-phase, total width: 1,670 mm, total height: 1,500 mm, working width: 2,400 mm, total length: 1,150 mm, input voltage: 400 V, table width: 2,400 mm, input frequency: 50 Hz, lifting height: 80 mm, Equipment: documentation/manual, safety light barrier, The (POLAR) Mohr D 56 ECO is a robust, hydraulically powered paper cutting machine. The machine is supplied with an original POLAR spare blade, hydraulic oil, a blade changing kit, grease gun, and various other tools. Tables on the left and right sides are optional. If desired, these can be disassembled, for example, when space is limited. - Model: (POLAR) Mohr D56 ECO - Type: hydraulic paper cutting machine - Cutting width: 560 mm - Table depth: 560 mm - Maximum feed height: 80 mm - Clamping force: 200–1,200 daN - Rear gauge speed: 70 mm/sec - Smallest automatic cut without spacer: 15 mm - Smallest automatic cut with spacer: 50 mm - Control: 5.5" monochrome display with membrane keypad - Memory: maximum 198 programs - Hydraulic, precise, and material-friendly swing cut - Adjustable clamping pressure and pre-clamping time - LED marking of the cutting line - Smooth stainless steel table surface for easy material transport Godpjz Aq D Nofx Aikobw - Simple blade change and fine adjustment at the front Dimensions (W × D × H): 1,150 × 1,670 × 1,500 mm This machine has been inspected and thoroughly tested by our own specialized technical department. If you require any further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: new, cutting diameter 315 mm capacity 90 degrees: flat 400 x 250 mm capacity 90 degrees: square 270 x 270 mm capacity 45 degrees: flat RE 300 x 280 mm capacity 45 degrees: round RE 280 mm capacity 45 degrees: square RE 280 x 280 mm capacity 45 degrees: flat LI 280 x 200 mm capacity 45 degrees: round LI 250 mm capacity 45 degrees: square LI 220 x 220 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 140 x 140 mm turning speed range: 35 + 70 m/min saw band length 3460 x 34 x 1.1 mm work height max. 870 mm voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 550 kg range L-W-H 2150 x 1400 x 1420 mm The MBS 400 DG model is a precision horizontal band saw designed for universal use. Key features of this machine include a swiveling saw frame for double miter cuts from -45° to 60°, as well as a hydraulic cylinder for precise lowering via a control valve. Features: Godpfx Ajz D It Uoikebw - Professional band saws for general workshop use - for cutting hollow profiles and solid materials, stainless steel, ... - torsion-resistant, heavily dimensioned saw frame made of ductile iron - adjustable hydraulic cylinder for regulating the contact - pressure of the saw frame - Swiveling saw arm for double miter cuts * to the left (-45°) and right (60°) - Smooth, low-vibration operation thanks to the use of high-quality materials - Sturdy vise made of gray cast iron with quick-release lock - Band saw guide with quick adjustment * to accommodate the workpiece width, ensuring optimal results - Automatic shut-off upon completion of the cut Scope of Delivery - Band saw blade - Workpiece stop - Base frame - Pressure gauge for band tension - Band saw guide with carbide inserts - Quick-release vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic end-of-cut shut-off

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Gbodpfxe Adfdde Aikow Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!

Year of construction: 2005, condition: ready for operation (used), travel distance X-axis: 285 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: FANUC, controller model: 21i-TB, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, number of axes: 3, This 3-axis STUDER S33 CNC cylindrical grinding machine was manufactured in 2005 and completely overhauled in 2026, with 0 operating hours post-overhaul. It features a center height of 175 mm and a center distance of 1000 mm. The machine is equipped with a powerful 7.5 kW motor spindle and a control system with a 10.4" color touch screen. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details. Godpfxszwd Hgs Aikebw - completely overhauled in 2026- Operating Hours: 0h after overhaul- Center Height: 175 mm- Center Distance: 1000 mm- Machine Base: Mineral cast Granitan S103- Strokes: 285 mm (X-axis) x 1150 mm (Z-axis)- X-axis Drive: AC Servomotor and ball screw, 0° angle, feed rate 0.001–5.000 mm/min- Z-axis Drive: AC Servomotor and ball screw, feed rate 0.001–10.000 mm/min- Measuring System: Incremental scale for X and Z axes, resolution 0.0001 mm- Grinding Headstock: Universal for external and internal grinding, Hirth serration 1° (-15° to +195°)- Motor Spindle (Pos. 2): 7.5 kW, 1400 to 3200 rpm, programmable cutting speed max. 50 m/s- External Grinding Guard: Wheel size D. 500x63mm F1 (80mm F5) with automatic contact protection- Internal Grinding Spindle (Pos. 3): Studer belt-driven internal grinding spindle (180°) with frequency inverter- Workhead Stock: Universal, roller bearing mounted, taper MK5, cylindrical outer nose D. 70mm, spindle bore D. 28mm, manual spindle lock- Workhead Drive: 1.8 kW AC Servomotor, speed range 1–1500 rpm, jog speed 1–50 rpm- Workpiece Weight: Max. 80 kg between centers- Tailstock: Taper MK4, 35 mm stroke, quill diameter 50 mm, hydraulic quill retraction with monitoring, manual fine adjustment +/- 0.04 mm- Pneumatic Lifters: Pneumatic lift-off for easy shifting of workhead and tailstock- Control System: Fanuc 21i-TB with 10.4" color touch screen, integrated PLC, 32KB user memory, 400 program storage slots- Power Supply: 400V +/- 10%, 50 Hz +/- 1Hz, 24V DC control voltage Optional Equipment: - Dittel Sensitron 6 contact detection with magnetic sensor (1 pc)- Movomatic C25 LP active probe- 3 pcs levelling elements- Air conditioning unit for electrical cabinet- Euchner hand-held control unit- Swiveling dresser for internal grinding- Park position for tailstock- 3 pcs Studer belt-driven internal grinding spindles (24,000 rpm / 40,000 rpm / 60,000 rpm)- Foot pedal for C-axis override with open doors- Foot pedal for clamping device actuation (tailstock)- Electrical interface for rotary dressing (spindle optional)- Movomatic in-process gauge control ES 124 control (measuring head optional)- 8 pcs used grinding wheel flanges for external grinding- Various new MK4 centers- Various dressers Additional Capabilities: - Capable of thread and form grinding (software must be requested directly from Fritz Studer AG)

Condition: used, functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, working height: 150 mm, height adjustment type: electric, grinding belt length: 2,150 mm, SCM Sandya 10 wide belt sanding machine Working width: 1100mm Working height: 5-150mm Number of sanding units: 2 1. Metal calibrating roller 2. Metal combi unit with sanding shoe Combi unit with sanding belt blowing system Gsdpfx Ajz Huwrsikebw Two feed speeds Material thickness gauge Main motor power: 15kW Machine weight: 1750kg Machine dimensions: 165x186x206cmH

Condition: new, overall weight: 36,000 kg, loading space volume: 68 m³, Year of construction: 2026, Equipment: ABS, ferroSTAR 68 cbm Silver-grey Chassis material: Steel Chassis type: Z-chassis Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 The widest chassis on the market with 1400 mm for maximum stability and safer handling. Load width (mm): 2325 Standard chassis: 110 Interior height, front (mm) (IHF): 2,460 Interior height, rear (mm) (IHB): 2,460 Load length (mm): 11744 Overall width (mm): 2550 Volume (m³): 68.00 Wheelbase (mm) (WB): 7,753 Overall length (mm): 13,128 Axles: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 (Haldex) Offset (ET): 120 Option 1: 1st axle with lift axle and starting assist Starting assist activation: via button in the truck (button installation is not included in the scope of delivery) and by pressing the brake pedal three times. Option 3: 3rd axle with lift axle Brake pad wear indicator: connected Return-to-ride (RTR): 15 km/h Air spring protection plate ECAS air suspension with raising and lowering valve Automatic lowering of the air suspension during tilting, manually lockable via Smartboard, as well as switch on the chassis Coupling head: Pneumatic, European Palm coupling Control console: EBS control on the left side in the direction of travel, in front of the axles Standard: Smartboard Air and electrical console on the right side in the direction of travel Support winch: Type JOST MODUL Tires: Tire size 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome-plated Lighting manufacturer: Aspöck Lighting type: ECOLED III - with STAS logo 2 LED reversing lights, rear, left and right in the direction of travel, mounted on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights in the front, left and right in the direction of travel, mounted in the area of the support winches Underrun protection Operation of underrun protection: manual Splash guard for underrun protection: Black with STAS logo Tilting cylinder: Hyva (STAS manufacturer choice) Type of tilting cylinder: Cylinder with small housing Tilting cylinder angle: Normal ±47° Gbjdpfxsz Exbre Aikjw Tilting cylinder model: Hyva - FC 169 Stroke of tilting cylinder: 8130 Tilting cylinder max. PTO pressure: 250 Hydraulic coupling: Swivel coupling Hydraulic coupling - size: 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose: 2,100 mm Number of splash guards on the fender: 2 pieces Toolbox Aluminum extension ladder with a length of 2.8 m, mounted on the right side in the direction of travel Broom and shovel holder with 3 holders each Load pressure gauge: Ø 100 mm Two plastic chock blocks Structure: Front wall inclination (°): 20 Rear wall inclination (°): 90 Front wall made of 3 mm HB450 Side wall made of 4/3 mm HB450 Floor made of 5 mm HB450 Position of rubber pads: mounted below the floor crossbeams Rear wall type: Hinged doors Rear wall made of 3 mm HB450 Number of hinges for rear wall: 3 pairs of door hinges Design of hinged door: 1/2 to 1/2 split, with 1 piece of latch Door wings open first on the right The open door wings are secured by a chain Seal for rear wall: with rubber seal in the lower area, extending 1,000 mm to the side Additional locking mechanism for rear wall: pneumatically double-acting Operation of the additional locking mechanism: manually via control on the side of the instrument panel Steel crossbars in trapezoidal design, foldable Number and positio

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2216, Demag ELV Hall Crane, Portal Crane, Bridge Crane, incl. steel structure with floor-mounted control Dimensions of steel structure approx. 22.5 x 8.9m with 1x Demag bridge crane 3.2 tons - gauge 8.55m Payload/lifting capacity 3200KG, 3.2t Technical data of the system: Crane track/steel structure consisting of HEB280 beams (running rails) with 8 U200 supports. Gbodez Tdbnepfx Aikjw Beams were cut flush with the floor, as they were cast into the concrete. Length of steel structure approx. 22.55m Overall width (outer edge of steel structure) approx. 8.9m Overall height of crane approx. 4.75m Top of running rails approx. 4.3m Bottom of running rails approx. 4.0m Top of bridge approx. 4.75m Bottom of bridge approx. 4.33m Hook height approx. 3.6m Gauge approx. 8.55m Support spacing: See sketch (Left 6.75 + 6.75 + 7.8 - center to center) System will be delivered complete: Steel structure / supports made of U240, running rails HEB300 incl. power rail/power supply 1x single-girder crane with 3200kg Demag PLV wire rope hoist with floor-mounted control Crane is dismantled and immediately available The location of the item is 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection only by prior appointment

Condition: used, Year of construction: 1991, power: 5.5 kW (7.48 HP), Table length: 3200 mm Table width: approx. 700 mm Height adjustment via handwheel Motor: 5.5 kW "• Saw blade is not tiltable (F90) • No miter gauge available • Ideally suited for ripping solid wood" Gbedpfez Rn Efox Aikow Saw blade diameter max. 450 mm Technical data available upon request All information is subject to change without notice.

Condition: ready for operation (used), Granite – Measuring plate & height gauge TESA – Micro-Hite - Plate dimensions: 3000x1300x350 mm - 2 x tailstock centers / center height 250 mm - Height gauge – TESA Micro-Hite / measuring range up to 600 mm Gjdo Aazamepfx Aikebw Dimensions: L x W x H 3.3 x 1.4 x 1 meter / Weight approx. 3000 kg Errors and omissions excepted.

Year of construction: 2026, condition: new, SALE! until end of 2026 - EXHIBITION MACHINE DUOFORMER S VERTICAL Do you want the BEST price/performance ratio? Contact us! Machines direct from the manufacturer! THE ORIGINAL MADE IN AUSTRIA! DUOFORMER - Heating – Forming- Pressing! The HEATING UNIT for all thermoplastic materials up to 230°C and The VACUUM PRESS for daily use! • No tricky placing of pressing layers • No sliding of the former • effortless closing and opening • pressing of M-shapes • operating from all 4 sides DUOFORMER S VERTICAL- Producing without compromises! Now on sale! Vertical opening: work piece height up to 850 mm Clamshell opening: See other sales offer on this platform! Pressing surface LxW: 2880x1280mm Heating surface LxW: 2600x1250mm Overall dimensions LxWxH: 3400x1750x1500mm • Heating drawer +230°C – 16kW • 40 m³/h high performance vacuum pump (BECKER) • 4 FESTO pneumatic-cylinders • Trussed pressing frame • Two hand safety operation • Motion signal Equipment: Vacuum table with silicone membrane and MEMBRANE FAST-CHANGE SYSTEM •Fully welded, sturdy and robust steel construction •pressure up to 9 t/m² (-900 mbar rel.) •analogue vacuum pressure gauge •mechanical vacuum pressure regulator •transparent Silicone membrane up to 230°C, 780% elongation, 40 Shore-A •robust, heat resistant phenolic resin ply working surface with integrated air suction channels, thickness 16mm •extra vacuum connector (e.g. for external vacuum bag, vacuum clamping) •with intecrated forklift pockets •incl. swivel castors Heating drawer with CAS-heating system (Controlled Air Stream) •material thickness: 0 - 70 mm •heating power: max temperature +230°C •2 circulation hot air fans •pull-out working surface with grating, grid 30 x 30 mm •easy removable heating drawer Control unit with 4“ SIEMENS touch panel •hinged control cabinet on the right side •variable temperature control up to + 230 °C •temperature control with timer and alarm •complete with cable and plug Electrical connection3~ 400 V, 50/60 Hz, 17.5 kW Duoformer production capabilities: ● Pre-heating and forming of solid surface materials such as: CORIAN; HIMACS; KERROCK; HANEX; STARON; MISTRAL; AVONITE; TRISTONE; VELSTONE; WILSONART; GETACORE; RAUVISIO; VARICOR; PLEXICOR; MEGANITE; KRION; LIVINGSTONE; MARLAN; EOS; FORMICA; MYSTERA, etc. ● Pre-heating and forming of all other thermoformable materials such as: ABS, PMMA (Plexiglas, Perspex, Lucite), PET-G (Vivak), PE, PS, PP, PVC-U, PC (Makrolon), UPM-GRADA, RESYSTA, NFPP, etc. ● Vakuumpress for bonding, coating, edge banding, flat pressing, forming, gluing, laminated bending, pressing, spot on profile fitting, veneering Other dimensions on request! DUOFORMER Maxi Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 3380x1380mm Heating surface LxW: 3000x1250mm Heating drawer +230°C – 24kW Vacuum pumps 40m³/h, 80m³/h, 100m³/h Overall dimensions LxWxH: 3900x1600x1500mm DUOFORMER Mega For a whole length of solid surface material boards! Clamshell opening: work piece height approx. 650 mm Vertical opening: work piece height approx. 1000 mm Pressing surface LxW: 4150x1780mm Heating surface LxW: 3850x1250mm Gbsdpfoiquxgsx Aiksw Heating drawer +230°C – 32kW Vacuum pumps 80m³/h, 100m³/h, 140m³/h Overall dimensions LxWxH: 4700x2050x1500mm UNIVERSALFORMERS Direct – Honest - Experienced

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, measuring range Y-axis: 615 mm, table width: 1,200 mm, table length: 800 mm, Height gauge TESA Micro-Hite M-600 Gjdpfx Aieqy H A Deksbw Range: 0 to 615mm Graphite table C.E.Johansson DIABASE (Made in Sweden) - Year: 1988 - Measurements: 1200x800 - Grade: B - Tolerance: 22 um Sale of the set.