Used Heidelberger Speedmaster 74 Zp for sale (7,445)

Condition: refurbished (used), Spindle bore diameter 250 mm Distance between points 6.000mm Height between points 600mm Diameter admitted on bench 1.200mm Diameter admitted on carriage 910mm Admitted diameter on neck 1,500mm Hnjdpfx Aasg Rn U Iecju Neck length 410mm Bench width 630mm Course transversal cart 670mm Course charriot superior 200mm Course counterpoint shaft 250mm Diameter axis tailstock 120mm

Condition: excellent (used), For sale: Original Ziegler FP 8/8 (DIN 14420) portable fire pump with the legendary Volkswagen air-cooled engine – 1192 cm³ displacement, 34 HP. ✅ Key specifications: • Manufacturer: Albert Ziegler Giengen/Brenz (Germany) • Model: FP 8/8 • Year of manufacture: 1974 • Engine: Volkswagen Type 122 – 1.2 petrol, 34 HP at 3600 rpm • Pump capacity: 800 l/min • Head lift: 80 mWS • Rated speed: 4000 rpm • Weight: 190 kg • Gear ratio: 1:1.45 • Operating hours: 16.3 h – practically like new! ✅ Condition & features: • The fire pump is complete and in fully original condition. • Nameplates and markings are intact. • The VW engine starts easily and runs smoothly. • Mobile design, easy to transport. • Ideal for a museum, collection, display, or as a reserve unit for a volunteer fire department. 🔥 Unique – VW Beetle engine in fire service! Volkswagen engines used in Ziegler pumps are highly valued today – reliable, easy to service, and collectible. 📦 Collection in person or transport upon arrangement. Hedpfx Aexa En Reacenu

Condition: excellent (used), Year of construction: 1997, High-Performance 3-Bed CNC Lathe Manufacturer: Gurutzpe – Spain Model: B 1400/3 x 8000 Year of manufacture: 1997 Control: NUM Max. swing diameter over bed: 1,420 mm Center height: 710 mm Max. turning diameter over cross slide: 1,150 mm Max. turning length: 8,000 mm Chuck spindle power: 75 HP Chuck speed: up to 600 rpm (4-speed gearbox) Chuck torque: 16,000 Nm Rapid traverse X/Z: 5,000 mm/min X-axis travel: 850 mm Hjdsw Snu Ejpfx Aacjnu Z-axis travel: 8,000 mm Turret with automatic 4-position changer Max. workpiece weight without steady rests: 14,000 kg with 1 steady rest: 17,000 kg, with 2 steady rests: 19,000 kg Machine equipment: – 1 x travelling steady rest – 2 x fixed steady rests – 1 x chip conveyor

Condition: good (used), Year of construction: 2015, operating hours: 50,871 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, The machine is in good technical condition, fully functional, and still in operation. A test run is possible. Spindle replaced in 2021. Technical specifications: X axis 1,020 mm, Y axis 610 mm, Z axis 720 mm. Spindle speed: 12,000 rpm. Clamping area of the table: 1,200 × 600 mm. Max. table load approx. 1,000 kg. Spindle speed range: 40 – 10,000 rpm. Spindle power approx. 15 / 22 kW (short-term operation). Spindle taper ISO 40 / DIN 69871. Tool magazine: 30 positions. Rapid traverse (X/Y/Z): approx. 30 m/min. Control: HEIDENHAIN iTNC 530, electric motor with planetary gearbox. Machine weight approx. 8,000–9,000 kg. Machine dimensions (LxWxH): approx. 3,700 × 2,800 × 2,800 mm. Hsdpjxmu Nkjfx Aacenu

Condition: good (used), Year of construction: 1994, functionality: limited functionality, travel distance X-axis: 760 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 11 kVA, torque: 142 Nm, table width: 470 mm, table length: 920 mm, table load: 600 kg, overall weight: 7,500 kg, spindle motor power: 11,000 W, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 360 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Yasnac MX3 control system. The machine has an unknown tool change malfunction, but it can be loaded manually. The encoders have been replaced, as have some screw bearings. See photos for condition. Under power, still in production. Hsdpfxoxggmhj Aacsnu

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Hnodpfx Aewzzivoacou Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: good (used), Spindle bore diameter 250 mm Distance between points 6.000mm Height between points 600mm Diameter admitted on bench 1.200mm Diameter admitted on carriage 910mm Admitted diameter on neck 1,500mm Neck length 410mm Bench width 630mm Course transversal cart 670mm Course charriot superior 200mm Course counterpoint shaft 250mm Diameter axis tailstock 120mm Hsdpfofv Aiuex Aacjnu

Year of construction: 2003, condition: good (used), input frequency: 50 Hz, machine/vehicle number: 3680-03, Resistance furnaces, 2 pieces, electric, crucible, heating, metal storage, melting, capacity 300 kg/h. Capacity of one furnace, aluminum alloy, weight 1500 kg, volume of the heating chamber 1.3 cubic meters. Energy consumption in production operations (maintaining molten metal at a temperature of 720 degrees C, open crucible) approx. 20 kW. Energy consumption during production inactivity (maintaining the molten material at a temperature of 720 degrees C, closed crucible) approx. 10 kW. Maximum melting point 900 degrees C, electrical power 70 kW. Voltage 230/400V, 50Hz, lap-automatic PID controller, bath thermocouple and safety controller, PLC control. The weight of one furnace is approx. 2600 kg. Furnace dimensions: length 1850mm, width 1850mm, height 1650mm + cover with installation 300mm. Dimensions of the frame for the stoves: length 3800mm, width 1850mm, height 210mm. Note: We also add an unused reserve crucible. Hnjdpfx Aod Ev Iasacsu

Condition: good (used), Fitzpatrick L1A Fitzmill Hnedpfxjrxdp Ne Aaceu 2006, stainless, duel sided knives, 150mm rounded cutting chamber, for wet and dry produce, two boxes of spare parts, mounted on mobile frame

Condition: excellent (used), Year of construction: 2016, operating hours: 6,900 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 760 mm, workpiece weight (max.): 1,350 kg, operating hours of spindle: 5,500 h, Equipment: chip conveyor, DEPO/ZPS MCV 1060 | 3-axis Heidenhain TNC 640 SK40 (white spindle) Hsdpfxeu Db Hxs Aacjnu External coolant supply. Through-spindle air supply. 30-position tool changer Very good condition! Immediately available!

Condition: defective spare-parts repository (used), Year of construction: 1993, functionality: limited functionality, travel distance X-axis: 760 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 11 kVA, torque: 142 Nm, table width: 470 mm, table length: 920 mm, table load: 600 kg, overall weight: 7,500 kg, spindle motor power: 11,000 W, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 360 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Yasnac MX3 control system. The machine has a malfunctioning Z-axis servo drive—simply replace it. It also has an unknown tool change malfunction, but tools can be loaded manually. The encoders have been replaced, as have some screw bearings. See photo for condition. Hnodpoxggazsfx Aacsu

Condition: as good as new (ex-display), the basic equipment includes: 120 mm steel rollers with adjustable sanding shoe electrically adjustable table stroke automatic measurement of the table position sanding belt centering using an infrared sensor feed speeds 4.5 m/min + 9 m/min Hsdpfxsvrvvmj Aaconu electromagnetic motor brake star, delta connection ammeter for load display 5.5 kW motor output at 100% duty cycle sanding belt length 650/1600 mm weight: 670 kg CE-tested

Condition: as good as new (ex-display), Technical data: Working width 600 mm Max. tool diameter 300 mm Clamping shaft D= 40 mm 2 feed speeds 4.5 / 9 m/min Motor output power S1 at 100% 2 x 5.5 HP (4 kW) Max. workpiece height 300 mm Rotation of the working rollers 950 rpm Brush diameter 120 - 300 mm Hodpfx Aaovrvw Doconu Total weight 820 kg

Condition: new, Design with bag filter Technical data: extruction nozzle 200 mm engine power S1 3 kW, 400V nominal flow rate 2262 m³/h max. volume flow 3010 m³/h cut surface vacuum measured with 2 m hose 2174 Pa filter area 13,7 m² filter dedusting compressed air Hodpfx Aevrv E Ieacsnu residual dust content H3 (

Condition: new, Universal belt sanding machine for wood and veneer sanding, 2 rubber coated pressure wheels and sanding shoe, electrical table height adjustment, automatical delta-wye conversion, amperemeter, digital height display, Hnsdpfx Aevrv Hljacsu Technical data: Motor output power S1 7,5 kW Feed speed 4,5 and 9 m/min Sanding belt dimensions 1900 x 650 mm Diameter working wheel 160 mm

Condition: as good as new (ex-display), Demonstration machine: Rubber-covered working roller 90 Sh, motorized table lift, Automatic switching - star/delta, ammeter for current measurement, sanding belt oscillation, mechanically adjustable sanding shoe, electronic measurement of the table position with digital display, rubber-covered pressure roller Noise-insulated and CE tested! Technical data: Sanding belt length 1900 mm Carpet speed 4.5/9 m/min Motor output power S1 7.5 kW Sanding width 950 mm Hnodpjvrvwkofx Aacou Diameter of the sanding roller 120 mm Hardness of the sanding roller 90 Sh Length without table extensions 1430 mm Width 1510 mm Height without suction nozzle 1800 mm Height with suction nozzle 2130 mm Special equipment: Pneumatic sanding shoe with automatic use Table carpet centering

Condition: new, The clean air dust extractors of the R160 series are used in trade and industry. They can be connected to individual machines, machining centers or via pipelines to multiple extraction points. The mobile clean air dust extractors impress with their high extraction performance while requiring little space. Hnsdpjvrv Ezjfx Aacou Advantages and features: - Version with bag filters can also be shaken off during operation. - Long service life thanks to bag filters - even with fine dust such as grinding dust - Direct connection to briquette press possible - Machine meets all common requirements (Category C, Bia certificate, residual dust content H3 < 0.1mg/m³) and can therefore be used in businesses without hesitation - High quality: Made in Germany Technical data: nominal volume flow: 1850 m³/h extruction nozzle: 160 mm low pressure V/min: 2550 PA motor rated-power: 2,2 kW chip collection volume: 280 l max. noise level: 73 dB(A) weight: 185 kg filter area: 8,25 m² of surface treated polyester needled felt, category C, BIA certificate, electroconductiv, washable- H3 < 0,1mg/m³,

Condition: new, Design with bag filters and integrated extinguishing device Technical data: extruction nozzle 250 mm engine power S1 6,5 kW, 400V nominal volume flow 3534 m³/h Hnodpfx Aajvr I R Ajcju max. volume flow 4900 m³/h cut surface vacuum measured with 2 m hose 2740 Pa filter area 22,4 m² filter dedusting compressed air chip collection volume 2 x 250 l residual dust content H3 (

Condition: as good as new (ex-display), Standard version: + Electric thicknessing table lift with 2 speeds with digital height adjustment + extra-long thicknessing table, ground, + 4-knife planing shaft, + automatic star-delta start-up + continuously adjustable feed speed with digital display, + 1st feed roller grooved + 2nd and 3rd feed roller made of steel, + Split input and output pressure beams + 4-way table suspension + special noise protection measures + knife setting gauge + CE compliant. Technical data: Planing shaft length 650 mm Feed speed 4 to 19 m/min Planing shaft diameter 120 mm Hnodpevrvptefx Aacsu Max. clamping distance 7 mm Thickness table length 1200 mm Motor output 100%Ed 9 kW S6 (7.5 kW S1, 100% ED) Feed motor 0.9 kW S6 Thickness passage 300 mm Speed 4600 rpm Extraction connection 150 mm Weight 1110 kg Special equipment on request

Condition: as good as new (ex-display), Demonstration machine Professional wood thickness planer with 4 knife shaft, articulated pressure beam, planed machine cast table, extremely stable, electromagnetic motor brake, star-delta circuit. CE tested Technical data: Planing width 630 mm Passage height 240 mm Planing knives 4 pieces Shaft diameter 120 mm Feed speed 5 and 10 m/min Motor output at 100% ED 5.5 Kw, 400V Weight: 790Kg Optional special equipment: Grooved articulated feed roller Hedpfx Aajvrvv Hjcjnu 2 height-adjustable under-table rollers Electric table lift Mech. digital display to tenths of a mm Spiral milling roller Tersa shaft Symbol photo Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, The Holzprofi DMS63 thickness planer is characterized by its stable construction, the strong cast machine table with a ground surface and the modern handling. Electric thickness table adjustment with display Incl. 2 adjustable under-table rollers Articulated feed roller and articulated pressure beam CE compliant, 100% Made in EU (developed, built, quality tested) Technical data: Table dimensions 630 x 900 mm Max. chip removal 8 mm Planing thickness 3 - 300 mm Feed speed 5 / 21 m/min continuously variable Hnsdpfovrvbcox Aacsu Planing shaft diameter 125 mm Planing shaft speed 5000 rpm Number of planing knives 4 pieces Planing knife dimensions 630 x 35 x 3 mm Motor output 9.5 kW -S6 (7.5 kW S1) Feed motor output 1.5 kW S1 Suction nozzle diameter 160 mm Weight 1110 kg Optional equipment: Motor output 9.5 kW Motor output 11 kW Spiral planer shaft

Condition: new, Extra strong thicknessing planer and moulder for commercial use. The special assembling of the cutterblock, allows the machine to be equipped with special moulderheads. electronic display and measuring of the table height electronic table adjustment with an accuracy of 0,1 mm extra long thicknessing table 4-cutter block automatic star/delta starting continuously adjustable feeder speed with digital display first feed roller grooved, second and third are made of steel two height adjustable cylinders on the thicknessing table Hsdpfovrvfhex Aacenu 4-way table suspension planer knife gauge Technical data: planing width 820 mm feeding speed 4 - 19 m/min planer shaft diameter 150 mm max. chip removal 7 mm length of thicknessing table 1200 mm motor power 100 % duty cicle 11 kW/15 HP (19 HP S6) feeding motor 1,5 kW/1 HP speed 4600 rpm dust collector plug 150 mm weight 1380 kg Additional Equipment 20 HP motor rubberized feed rollers tersa cutter shaft milling unit with cutting plates

Condition: as good as new (ex-display), Demonstration machine The professional brushing machine from Holzprofi for finishing the surfaces, fine sanding, structuring, fine sanding and other finishing work. The surface depends on the tools used. Standard version: 2 rubberized pressure rollers, height adjustable, Scale with roller height display, Roller height electrically adjustable, Automatic switchover - star/delta Hnodevrvwqopfx Aacou Machine is CE compliant Technical data: Working width 400 mm Max. tool diameter 300 mm Clamping shaft D= 40 mm 2 feed speeds 4.5 / 9 m/min Motor output power S1 at 100% ED 5.5 HP (4 kW) Max. workpiece height 300 mm Rotation of the working roller 1140 rpm Brush diameter 120 - 300 mm Machine size l x w x h 1500 x 1000 x 1750 Weight 435 kg Equipment on request Symbol photo

Condition: used, Demonstration machine The professional brushing machine for finishing surfaces, fine grinding, structuring, fine grinding and other finishing work. The surface depends on the tools used. Standard version: Independent height adjustment 1st and 2nd unit, 2 rubberized pressure rollers, height adjustable, Scale with roller height display, Roller height electrically adjustable, Machine is CE compliant Technical data: Working width 400 mm Max. tool diameter 300 mm Clamping shaft D= 40 mm 2 feed speeds 4.5 / 9 m/min Motor output power S1 at 100% 5.5 HP (4 kW) Max. workpiece height 300 mm Hnodpfx Ajvr I Rvsacju Working roller rotation 1140 rpm Machine dimensions l x w x h 1700 x 1000 x 1750 Brush diameter 120 - 300 mm Machine weight 655 kg Equipment on request Symbol photo

Condition: as good as new (ex-display), Demonstration machine: Rubber-covered working roller 90 Sh, motorized table lift, Automatic switchover - star/delta, ammeter for current measurement, sanding belt oscillation, mechanically adjustable sanding shoe, electronic measurement of the table position with digital display, rubber-covered pressure roller Noise-insulated and CE tested! Hodpfx Aaovrvwdocenu Technical data: Sanding belt length 1900 mm Carpet speed 4.5/9 m/min Motor output S1 11 kW Sanding width 1100 mm Diameter of the sanding roller 120 mm Hardness of the sanding roller 90 Sh Width 1660 mm Height without suction nozzle 1800 mm Height with suction nozzle 2130 mm Symbolic photo