Used Heavy Duty Castors for sale (6,005)

Condition: used, Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, double turntable steering, heavy-duty trailers, bale scales, straw trailers, 2-axle tandem trailers -Handover: in its current condition as inspected -Air brake: not connected -Heavy-duty transport wagon: 2-axle tandem trailer with 1-axle turntable steering Chsdpfx Aoz Eg Ruep Ded -Platform: 9950/2500/H1400 mm -Load capacity: t -Tires: 11.00-20 -Overall dimensions: 12050/2500/H1400 mm -Weight: 5000 kg

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,200 mm, Genox GXC1200T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 90kW Drive Motor with outboard rotor bearings (110kW & 132kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,200mm wide x 660mm diameter cutting chamber with a choice of either a 10 knife/5 row or 14 knife/7 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. Cjdpfxez Aka Do Ap Dohd We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: used, functionality: fully functional, power: 5.5 kW (7.48 HP), Type: R143 R82 DV132S-4TF Power: 5.5 kW Motor speed: 1430 rpm Chjdjy T Ndxopfx Ap Dsd Output speed: approx. 4 rpm Torque: approx. 10,000–12,100 Nm Voltage: 220Δ / 380Y Design: B3 Protection class: IP54 Weight: approx. 500 kg

Year of construction: 2016, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, industrial trailer, container dolly, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Year of manufacture: 2016 -Platform: 10000/2500/H1030 mm -Load capacity: 16 t -Tires: 250-15 industrial pneumatic tires Quantity: 1 piece available Codpeyvyxrjfx Ap Djhd -Weight: 3080 kg

Condition: used, functionality: fully functional, total length: 34,000 mm, shelf height: 6,000 mm, support length: 3,000 mm, frame height: 6,000 mm, frame width: 1,100 mm, Dexion Speedlock P90 Pallet Racking – High-Bay Racking, 6.0 m, complete with safety pins and fastening material Cjdpfx Asz Ef S Rop Djhd Original Dexion Speedlock P90 pallet racking from a dismantled system. Professionally dismantled by our own assembly team, inspected, and ready for immediate use. Original Dexion – The Speedlock P90 system is one of the most widely used racking systems in Germany – extension parts are readily available at any time. ───── SCOPE OF DELIVERY ───── • 12 x Upright frames Dexion Speedlock P90 Type 100/30 · Height 6,000 mm · Depth 1,100 mm • 66 x Beams Dexion SLI 120/14 Clear span 3,000 mm • Incl. safety pins, floor anchors, etc. ───── TECHNICAL DATA ───── • Manufacturer: Dexion (Original) • System: Speedlock P90 • Upright type: 100/30 • Frame height: 6,000 mm • Frame depth: 1,100 mm • Beam type: SLI 120/14 • Beam profile: 120 mm • Clear span: 3,000 mm • Suitable for Euro pallets (transverse and longitudinal) ───── EXAMPLE CONFIGURATION ───── • 11 bays with a clear span of 3,000 mm • 3 beam pairs per bay = 3 levels + floor level • Total length: approx. 34 m • Approx. 132 pallet spaces (3 pallets/bay, longitudinal) ───── CONDITION ───── • Used, inspected • Professionally dismantled by qualified personnel • Shows signs of normal wear and tear • Neatly bundled, ready for immediate loading ───── OUR SERVICE ───── ✔ Rack rental – flexible for projects & seasonal needs ✔ Assembly throughout Germany by our own team ✔ Rack inspection according to DIN EN 15635 by a certified rack inspector ✔ Dismantling, de-installation & reuse from a single source ✔ Delivery by forwarding agent can be arranged ───── SALE ───── • Preferably sold as a complete package • Partial quantities possible upon request • Invoice with VAT shown – eligible for input tax deduction ───── PICKUP & DELIVERY ───── ✔ Pickup: 99428 Grammetal (Thuringia, near Erfurt/Weimar) ✔ Loading with forklift on site possible ✔ Delivery by forwarding agent throughout Germany on request

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,600 mm, Genox GXC1600T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 110kW Drive Motor with outboard rotor bearings (132kW & 160kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,600mm wide x 660mm diameter cutting chamber with a choice of either a 5 row or 7 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). Chedpez Ai T Nefx Ap Dod A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Codpjz Ai U Tjfx Ap Dehd

Condition: good (used), functionality: fully functional, Segura 117 metal bandsaw - Tiltable table - Equipped with Ideal bandsaw blade welding device - Very heavy-duty design - Speed regulation Cedpfx Aoygmztop Dehd Due to the age of the used machine, warranty is excluded when sold to commercial customers.

Condition: good (used), Heavy duty castors, heavy duty wheel, tire, forklift drive wheel -Manufacturer: Jungheinrich, forklift drive wheel -Wheel size: Ø 310 x 105 mm Chsdszzqmbspfx Ap Dsd -Pitch circle: Ø 113/18 mm -Weight: 13.2 kg

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. Chedjz Ai T Aopfx Ap Dod We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, load capacity: 40,000 kg, lifting height: 800 mm, tire condition: 100 %, Special design / unique item: mobile crane portal for loading and unloading machines and vehicles from low-bed trailers, or as a boat lift in a dry dock, 3-meter clear width, variable hook height, 800mm self-travel, expandable lifting stroke by 1200mm with lifting systems of 4 x 6.5 tons, statically loadable up to 40 tons, adjustable crossbeam, mobile load capacity of 10 tons, electro-hydraulically driven steering chassis, suitable for use on level, smooth concrete surfaces. Chedpfx Apsz Ekm Hj Dod

Condition: like new (used), We are offering this Copeland Z9-6MM-30X-AWM in like-new condition, with the year of manufacture unspecified. We are selling a Copeland semi-hermetic, air-cooled condensing unit, removed from a cold room installation. Specifications: Brand: Copeland Model: Z9-6MM-30X-AWM Frequency: 50 Hz Purchased new in 2021 Professionally dismantled in 2022 In perfect working order Stored indoors since dismantling Chjdez D Erbspfx Ap Ded The equipment can be viewed and collected in the Besançon area. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: not inspected (used), Heavy-duty shelving system, painted, consisting of 7 uprights, 18 pairs of beams, max. load per shelf: 1,500 kg, dimensions: 16,000 x 5,000 mm, without contents. Cedpfez R Nucox Ap Djhd

Condition: good (used), Year of construction: 1999, functionality: fully functional, total width: 1,060 mm, shelf height: 2,250 mm, support length: 500 mm, -KOM 3156- Offered here is an SSI Schäfer plug-in shelf rack in good condition. The maximum bay load is 1,200 kg, and the maximum shelf load is 200 kg. In total, we have 23 identical racks available. The rack consists of: Codpfx Ajxqc Txop Djhd - 2 x Schäfer storage bins LW 512 - 2 x Schäfer storage bins LW 530 - 3 x standard shelves Rack dimensions: Height: approx. 2,250 mm Depth: approx. 500 mm Width: approx. 1,060 mm Height of storage compartments (from bottom to top): 1 x lower standard shelf: approx. 200 mm high 2 x large Schäfer storage bins: approx. 350 mm high 1 x middle standard shelf: approx. 200 mm high 2 x small Schäfer storage bins: approx. 200 mm high 1 x upper standard shelf: approx. 300 mm high The height of the Schäfer storage bins can be individually adjusted using the mounting brackets (see last photos).

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM Cedpfsh U Rzgjx Ap Dohd WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, 21.6 m Stow Pallet Rack, 6 m high, 6 levels, blue painted (RAL 5015) Manufacturer: Stow Chodpfx Aeya Emhsp Dsd Type: Pallet Rack System Rack length approx. 25,200 mm Upright height: approx. 6,000 mm Upright depth: approx. 1,100 mm Upright type: PLFB 16P Clear bay width: 3,600 mm Number of bays: 6 Number of levels: 6 (10 crossbeams + floor space) Crossbeam type: PNB 0436 Max. pallet weight: 1,000 kg Permissible shelf load: 4,000 kg Permissible bay load: 20,000 kg Upright surface: blue painted (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 7 x Upright 6000 x 1100 mm, bay load 20,000 kg, blue 60 x Crossbeam 3600 mm incl. locking pins, shelf load 4,000 kg, orange Item location: Geisleden Your partner for safe storage logistics: Assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed correctly and meet all safety standards. As experts in storage technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a conversion, or the dismantling of a warehouse – we take over the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving systems for small parts and archives - Warehouse platforms for optimal use of space Rack inspection & inspection according to DIN EN 15635 Safety is a legal obligation. We carry out the annual expert inspection (according to DGUV rule 108-007): - Inspection for deformations and damage. - Check of locking pins and load signs. - Creation of a legally sound test report including a test sticker. We would be happy to offer you a suitable bank financing for your project. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), mileage: 428,000 km, power: 304 kW (413.32 HP), first registration: 10/2026, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 8,250 mm, total width: 2,500 mm, total height: 3,050 mm, Equipment: ABS, differential lock, electric window regulation, power assisted steering, = Additional Options and Accessories = - Leaf spring suspension - Differential lock - Air-suspended seats - Air horn - Sun visor - Power take-off (PTO) - Central lubrication system = Additional Information = Year of manufacture: 2000 Suspension: Leaf spring suspension Front axle 1: Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Front axle 2: Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 1: Dual tires; Differential lock; Tire tread depth left inner: 20%; Tire tread depth left outer: 20%; Tire tread depth right inner: 20%; Tire tread depth right outer: 20%; Reduction gear: External planetary axles Chedpo Agauaefx Ap Dsd Rear axle 2: Dual tires; Differential lock; Tire tread depth left inner: 20%; Tire tread depth left outer: 20%; Tire tread depth right inner: 20%; Tire tread depth right outer: 20%; Reduction gear: External planetary axles Number of cylinders: 6 Technical condition: good Optical condition: good

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 700 h, load capacity: 10,000 kg, lifting height: 3,600 mm, fuel type: electric, construction height: 2,840 mm, battery capacity: 1,240 Ah, battery voltage: 72 V, fork length: 2,500 mm, Equipment: adjustable boom, full service history, hydraulic fork positioner, pallet forks, sideshift, For sale is a robust and powerful Hoist E220 electric forklift with a lifting capacity of 10 tons. The unit is in good condition and has been regularly maintained. Technical data: * Manufacturer: Hoist * Type: E220 * Forklift year of manufacture: 2013 * Operating hours: approx. 690–700 hours * Lifting capacity: 10,000 kg * Mast: Standard mast * Lifting height: 3.60 m * Overall height: 2.84 m * Battery: 72 V / 1240 Ah * Battery year of manufacture: 2016 Equipment: * Side shifter * Fork positioner for standard forks * Forks 1.50 m * Additional 2.50 m long forks available Condition / Maintenance: * A complete service was performed last year. * Forklift is ready for immediate use. * Very low operating hours for this machine class Chsdpfez Hk Hiex Ap Dsd If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), mileage: 124,471 km, fuel type: diesel, axle configuration: 8x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Low noise - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Particle filter - Sun visor - Stability control - Auxiliary heater - Toolbox - Power take-off (PTO) - Tow hitch = Further Information = General Information Year of manufacture: 2018 Construction year: 2018 Transmission Transmission: I SHIFT, automatic Axle Configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Twin tires Rear axle 2: Lift axle; Steered Weights Unladen weight: 30,455 kg Functional Mast: Telescopic (14 sections) Chedpfo Ahiyqjx Ap Ded Mast length: 36 m Lifting capacity: 26,180 kg Lifting height: 3,600 cm Crane: EFFER 1855/8S + JIB 6S HEAVY DUTY, behind the cab Crane body brand: EFFER 1855/8S + JIB 6S HEAVY DUTY CE marking: yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request VOLVO FH 650 8X2 TRUCK WITH EFFER 1855/8S CRANE + JIB 6S HEAVY DUTY + WINCH EURO 6 L PACKAGE 650 HP DRIVE 8X2 LAST AXLE LIFT AND STEERABLE 10 TON FRONT AXLE WHEELBASE 510 CM AIR-SUSPENDED FH SLEEPER CAB WITH FULL EQUIPMENT, AIR CONDITIONING, AUXILIARY HEATER, NAVIGATION, REFRIGERATOR, MICROWAVE I-SHIFT AUTOMATIC TRANSMISSION COMPLETE INNER LINER CHASSIS FROM FACTORY TRUCK-TRAILER COMBINATION ADJUSTABLE FIFTH WHEEL + TRAILER COUPLING MANY TOOLBOXES EFFER 1855/8S CRANE + JIB 6S HEAVY DUTY + WINCH 2X OIL COOLER FOR CRANE HYDRAULICS TOTAL 14X HYDRAULICALLY EXTENDABLE + 3 MANUAL MAXIMUM WORKING HEIGHT 36 METERS !! MAXIMUM LIFTING CAPACITY 21,180 KG MAXIMUM LIFTING CAPACITY AT 31.94 METERS 1640 KG 5TH + 6TH FUNCTION ON JIB CRANE CAN WORK IN FRONT OF THE CAB USING THE FRONT OUTRIGGER 5X OUTRIGGER LARGE HYDRAULIC WINCH WITH HOOK AND PULLEYS REMOTE CONTROL PREPARATION FOR REMOVABLE BALLAST PLATFORM FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE OUR VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINERY THAT ARE OFFERED FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 15,500 kg, rotor diameter: 800 mm, rotor width: 2,000 mm, power: 250 kW (339.91 HP), rotational speed (max.): 480 rpm, Equipment: rotational speed infinitely variable, Genox GXC2000G Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 250kW Drive Motor with outboard rotor bearings (200kW - 315kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 2,000mm wide x 800mm diameter cutting chamber with a choice of either a 5, 7 or 9 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). Chjdpfxsz Ai Umo Ap Djd A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: used, functionality: fully functional, total height: 2,500 mm, shelf height: 2,500 mm, support length: 2,700 mm, frame height: 2,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,200 mm, We are selling a Jungheinrich pallet racking system, type B, in almost new, yet used condition. Ideal for warehouses, logistics, and industry with high requirements for load-bearing capacity and quality. Racking type: Pallet racking Manufacturer / System: Jungheinrich Type: B Frame dimensions: 2,500 mm height × 1,200 mm depth Beam length: 2,700 mm Beam type: 0413 Load capacity per bay: approx. 3,000 kg Material: Steel, industrial quality Condition: Used, almost new Scope of delivery: 10 × Upright frames 2,500x1,200mm 36 × Beams type 0413 incl. safety pins incl. floor anchors Optional, for an additional charge: • Racking installation throughout Germany • Grid decking or grating • Impact protection systems • Deep stringers or upright supports Advantages: Very high load capacity per bay for heavy palletized goods Proven racking system from a leading manufacturer Almost new condition Ideal for new installations or expanding existing systems Immediately available Invoice with VAT shown. Collection / Shipping: Collection possible by arrangement Loading possible by arrangement Shipping via freight forwarder possible Note: More pallet racks, beams, frames and accessories are available. Please also check out our other listings. Cjdpfez Ept Sjx Ap Djhd

Condition: used, color: other, first registration: 04/2010, Year of construction: 2010 Empty weight: 450 kg Serial number: 25.50.744.013 We have a stock of >100 axles. Cjdpfxsy Efrcj Ap Dehd Please contact us if you can't find what you are looking for.

Condition: good (used), Used Bode - T-slot clamping table Csdpfx Apexqpctj Dehd Length x Width x Height = 4000 x 1500 x 200 mm

Condition: like new (used), Heavy-duty shelving / pallet racking 4 bays each with 3 levels (plus base) Height: approx. 4.00 m Length: approx. 11.00 m Scope of delivery: 5 upright frames (height: approx. 4.00 m each) 24 shelf beams (length: approx. 2.70 m each) 48 safety pins Chsdsz D Nhgspfx Ap Djd Inspection is possible by appointment at the warehouse in 46384 Raesfeld.

Condition: used, color: other, first registration: 04/2010, Year of construction: 2010 Empty weight: 450 kg Serial number: 25.50.744.012 We have a stock of >100 axles. Cjdpfjy Eft Hjx Ap Dehd Please contact us if you can't find what you are looking for.