Used Heavy Duty Castors for sale (5,012)

Condition: good (used), Heavy-duty castors, heavy-duty wheels, tires, tires with rims, heavy-duty tires, forklift tires -Heavy-duty castors: 4 pieces, from electric forklift -Tires: Ø 200 x 80 mm -Hub: Ø 65 x 45 mm / Dimensions see photos Kdodsxbyltspfx Aa Rew -Shipping/Price: complete -Dimensions each: Ø 200 x 170 mm -Weight: 10.5 kg/piece

Condition: like new (used), 🧰 Product Features • Manufacturer: Blickle • Condition: As new • Colour: Blue, zinc-plated • Wheel diameter: 160 mm • Wheel width: 50 mm • Bearing type: Ball bearing • Overall height: 202 mm • Tread hardness: 75 Shore A • Unit weight: 4.2 kg • Static load capacity: 1,450 kg • Load capacity at 4 km/h: 580 kg • Temperature resistance: -20 °C to 70 °C 💰 Price: €25 net, excl. VAT from 4 units: €20 net, excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by prior arrangement Kdodpfx Asw S I U Eja Rew Over 5,000 linear metres of pallet racking from various manufacturers in stock at all times (Specifications, details, and prices are subject to change and error. Prior sale reserved! Please refer to our General Terms and Conditions. All prices ex works, excl. VAT.)

Condition: good (used), Heavy-duty castors, heavy-duty wheels, tires, heavy-duty double swivel castors, heavy-duty double fixed castors -Manufacturer: Vogel /Baumann, heavy-duty castors 4 pieces from electric forklift EVS 25/14 -Rim: Vogel RV 5450 Tires: Ø 200 x 80 mm -Shipping/Price: complete -Dimensions each: Ø 200 x 165 mm Kdodswwrv Ejpfx Aa Row -Weight: 9.4 kg/piece

Condition: good (used), Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Manufacturer: Acla, heavy duty bike 2 pcs. -Wheel size: Ø 85 x 115 mm -Inside: Ø approx. 25.6 mm -Price: complete Kodsf Ec R Hepfx Aa Rjdw -Weight: 2.1 kg/piece

Condition: used, fuel type: electric, Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Caster: Ø 85 x 105 mm, 2 pieces -Inside: Ø approx. 25 mm -Price: complete Kdjdpfxef Ec R Rs Aa Row -Weight: 2 kg/piece

Condition: used, Heavy duty castors, heavy duty wheel, tires, heavy duty double swivel castors, heavy duty double fixed casters Ksdpfeih S Ngex Aa Rodw -Manufacturer: Tente, heavy duty castors swivel castors 4 pieces -Equipment: ball bearings, rollers type 07/15 -Wheel dimensions: 200 x 80 mm, each. 2 pieces per box -Receiving plate: Dimensions see photos -Price: complete -Dimensions each: 410/345/H290 mm -Total weight: 360 kg, 90 kg/pc.

Condition: used, fuel type: electric, Heavy duty castors, heavy duty wheel, tire, forklift drive wheel Kodpfx Aef A Sl Rea Rjdw -Manufacturer: Wicke- Elastic heavy duty bike -Wheel size: Ø 270/105-225 mm -Hole circle: Ø 188/9 mm -Price: per piece -Number: 1 piece -Weight: 8.9 kg/piece

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Kdodpjwhylvefx Aa Row Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Kdodpfsv D Uhfox Aa Rjw Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated ≤2m workpieces are unloaded through servo flaps

Condition: used, axle configuration: 3 axles, first registration: 01/2009, color: other, Year of construction: 2009, Empty weight: 9.040 kg Axle 1: left 8 mm right 8 mm Kdodow Rfb Hjpfx Aa Rsw Axle 2: left 10 mm right 10mm Axle 3: left 10 mm right 10 mm

Condition: used, Year of construction: 2011, AXE AND STATUS TUSCAN LL-950 X 3000 HEAVY DUTY CNC LATHE MAKE TUSCAN, MADE IN TAIWAN MODEL LL-950x3000 YEAR 2011 CONTROL FANUC Oi-TD TURRET 12 STATION MAXIMUM CUTTING DIAMETER 950.0 mm CENTRE HEIGHT 575.0 mm DISTANCE BETWEEN CENTRES 3000.0 mm SPINDLE NOSE A2-15 SPINDLE SPEED 9 – 500 RPM SPINDLE CENTRE MT # 6 SPINDLE POWER 30 / 37 Kw TOOL SIZE 32.0 mm TRAVERSES X AXIS: 480.0 mm Kdjdpfjxvclrox Aa Rsw Z AXIS: 3000.0 mm RAPID TRAVERSES X AXIS: 5M / MIN Z AXIS: 4M / MIN TAILSTOCK YES PLUS TWIN SWARF CONVEYOR 4 JAW CHUCK 3 X STEADIES FULLY FUNCTIONAL FULL SET OF MANUALS TURRET TOOLING

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,600 mm, Genox GXC1600T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 110kW Drive Motor with outboard rotor bearings (132kW & 160kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,600mm wide x 660mm diameter cutting chamber with a choice of either a 5 row or 7 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Kjdpfsxwnwisx Aa Rodw

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Ksdpfxeh Uyg No Aa Rjdw

Condition: good (used), mileage: 751,411 km, power: 375 kW (509.86 HP), first registration: 06/2011, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 10x4, wheelbase: 6,150 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: air, total length: 8,470 mm, total width: 2,550 mm, total height: 2,740 mm, Year of construction: 2011, Equipment: ABS, air conditioning, cruise control, parking heater, retarder, traction control, = Additional Options and Accessories = - Digital tachograph - Tachograph (control device) - Fixed (fifth wheel) - Additional braking system = Remarks = Number of axles: 5, Configuration: 10x4, Payload: 31,340 kg, Unladen weight: 12,160 kg, Gross vehicle weight: 43,500 kg, Total fuel tank capacity: 900 litres, Unbraked trailer load: 750 kg, Fifth wheel height: 137 cm, Fifth wheel: Fixed, Number of differential locks: 2, Suspension type: Full air suspension, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Colour: Multicolour, Metallic, Engine output: 375 kW (503 HP), Fuel: Diesel, Emissions standard: Euro 5, Transmission type: I-Shift, Gears: 12, Additional braking system, Retarder brand: Voith, Power steering, ABS, ASR, Number of seats: 2 = Further Information = Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Steering axle; Left tire tread: 6 mm; Right tire tread: 6 mm Axle 2: Tire size: 385/55R22.5; Lift axle; Steering axle; Left tire tread: 5 mm; Right tire tread: 2 mm Axle 3: Tire size: 315/70R22.5; Twin tires; Inner left tread: 9 mm; Outer left tread: 9 mm; Inner right tread: 10 mm; Outer right tread: 10 mm Axle 4: Tire size: 315/70R22.5; Twin tires; Inner left tread: 5 mm; Outer left tread: 6 mm; Inner right tread: 4 mm; Outer right tread: 5 mm Axle 5: Tire size: 385/55R22.5; Lift axle; Left tire tread: 4 mm; Right tire tread: 6 mm Weights Unladen weight: 12,160 kg Payload: 31,340 kg Gross weight: 43,500 kg Kedpev U Rg Eefx Aa Rjdw Cabin Number of seats: 2 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 3 Identification Registration number: BZ-HG-12 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used commercial vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, years, and price categories. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognisable quality • Competitive pricing • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of “recognisable quality” • And much more… Please visit our website for special offers and our full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us your enquiry via our website. Ask directly about our European warranty packages.

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. Kdedpsh U Rzgsfx Aa Rew SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: new, functionality: fully functional, empty load weight: 2,000 kg, total length: 4,000 mm, Year of construction: 2024, construction height: 610 mm, drive type: Keine, load capacity: 20,000 kg, tractive force with load: 20,000 N, construction width: 2,200 mm, Heavy duty trailer Condition: New unit Technical condition: New Front tires type: Bandages Front tires Size: 450x300x305 Rear tires Type: Bandages Rear tires Size: 450x300x305 Kodpfju Dz N Hjx Aa Redw Description: All-wheel steering steering steering knuckle with adjustable track and steering rods, limited steering angle at 45 ° steering stop, drawbar: 1,200 mm with drop protection and height adjustment as well as All-wheel steering steering steering knuckle with adjustable track and steering rods, limited steering angle at 45° steering stop, drawbar: 1,200 mm with drop guard and height adjustment and

Condition: good (used), Transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon -Manufacturer: Demag, heavy-duty rail wagons -Platform: 3980 x 2500 mm -Load capacity: 40,000 kg -Roller spacing: 1505 mm -Overall dimensions: 4160/2500/H885 mm Kdjdpfoxwup Eox Aa Row -Empty weight: 3360 kg

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. Kdjdpexwnwcjfx Aa Rsw We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: new, functionality: fully functional, total length: 4,000 mm, Year of construction: 2024, construction height: 540 mm, drive type: Keine, load capacity: 10,000 kg, tractive force with load: 10,000 N, construction width: 2,000 mm, Heavy duty trailer Kodpfju Dz Rdox Aa Redw Condition: New unit Technical condition: New Front tires type: Bandages Front tires Size: 425x150 Rear tires Type: Bandages Rear tires Size: 425x150 Description: Steering knuckle, double-acting wheel chocks, height-adjustable drawbar with drop guard Steering knuckle, double-acting wheel chocks, height-adjustable drawbar with drop guard

Year of construction: 2006, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, transport trailer, refuse transport trailer -Manufacturer: Franke, transport trailer low loader, refuse transport trailer type TA-MC Kdsdpfx Aael Dvtko Row -Platform: Length 2750 mm, dimensions see photos / technical drawing -Load capacity: 1200 kg -Maximum speed: 25 km/h -Number: 2 trailers available Price: per piece -Transport dimensions: 5100/1735/H1740 mm -Empty weight: 840 kg/unit

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 800 mm, Genox GXC800 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 55kW Drive Motor with outboard rotor bearings (75kW & 90kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. Kdedpjxwnu Ujfx Aa Row 800mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 40 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: new, functionality: fully functional, total length: 4,000 mm, Year of construction: 2024, construction height: 760 mm, drive type: Keine, load capacity: 40,000 kg, tractive force with load: 40,000 N, construction width: 2,200 mm, Heavy duty trailer Kdodpou Dz N Tsfx Aa Row Condition: New unit Technical condition: New Front tires type: Bandages Rear tires type: Bandages Description: All-wheel steering - swing axle - axle rocker

Year of construction: 2025, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,200 mm, Genox GXC1200T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 90kW Drive Motor with outboard rotor bearings (110kW & 132kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,200mm wide x 660mm diameter cutting chamber with a choice of either a 10 knife/5 row or 14 knife/7 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). Kodpfxsxwnu Ie Aa Rodw A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: used, functionality: fully functional, empty load weight: 1,850 kg, total length: 4,000 mm, Year of construction: 2024, construction height: 710 mm, load capacity: 18,000 kg, tractive force with load: 18,000 N, construction width: 2,000 mm, Heavy duty trailer Condition: Ready for use and fully functional Kedsu Dz Rqspfx Aa Rsdw Technical condition: New Description: All-wheel steering - steering knuckle with adjustable track and steering rods, steering limiting pull at 45 ° steering stop, drawbar: 1,200 mm with drop protection and height adjustment and

Condition: new, functionality: fully functional, empty load weight: 1,600 kg, total length: 6,020 mm, Year of construction: 2024, construction height: 530 mm, drive type: Keine, load capacity: 18,000 kg, tractive force with load: 18,000 N, construction width: 2,000 mm, Heavy duty trailer Condition: New unit Kodeu Dz Rkopfx Aa Rsdw Technical condition: New Front tires type: Bandages Front tires Size: 425x150x305 Rear tires Type: Bandages Rear tires Size: 425x150x305 Description: All-wheel steering steering steering knuckle with adjustable track and steering rods, limited steering angle at 45 ° steering stop, drawbar: 1,200 mm with drop protection and height adjustment and All-wheel steering steering steering knuckle with adjustable track and steering rods, limited steering angle at 45° steering stop, drawbar: 1,200 mm with drop guard and height adjustment and