Used Hay Blower for sale (1,820)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, Dry hay, biomass or a drying container with an air volume you set yourself, instead of running a fan flat out and paying for it. This Karl Barth AG Ventomat SE-1-100-4p was bought in December 2025 and used for only approx. four months. It runs perfectly and comes as a complete working setup, not just the fan: factory-configured 5.5 kW Invertek Optidrive E3 frequency inverter with disconnect switch, duct cone and reduction, plus a free 10m Ø400mm fabric hose. New purchase price approx. CHF 8,507. Only one available - sold as one complete set with the inverter, ducting accessories and hose. Once sold, it's gone. Best for: hay drying, biomass drying, drying containers and agricultural ventilation where you want to control air volume rather than run flat out. Not suitable for: corrosive or heavily dust-laden air streams, or ATEX zones unless independently verified. What the specs mean in practice: • 5.5 kW motor, 4 kW rated fan output - sized for continuous hay/biomass drying, not short bursts • Factory-configured Invertek Optidrive E3 inverter - set air volume to the crop and its moisture, cutting energy use • Inverter in IP66/NEMA4X with disconnect switch - mounts in a dusty barn without a separate control cabinet Rjdpfjzrzizsx Akijch • Duct cone 222/563 to D400mm and D750/D600mm reduction - connects to existing ducting, no custom fabrication • 10m Ø400mm flexible fabric hose included - place the fan where it fits, duct air where needed • Painted sheet metal, single-suction Swiss build (Karl Barth AG) - serviceable and supported locally Complete package includes: Ventomat fan, Invertek Optidrive E3 5.5kW inverter with disconnect switch, duct cone 222/563 to D400, duct reduction D750/D600 with flange ring, and a 10m Ø400mm fabric hose at no extra charge. Buying/configuring the inverter alone is a substantial separate cost. Technical data: – Manufacturer: Karl Barth AG, Dättlikon (CH) – Type: Ventomat SE-1-100-4p – Rated output: 4kW – Motor: 5.5kW, 4-pole – Construction: Painted sheet metal, single-suction – Inverter: Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X – Inverter input: 380-480V, 3-phase, 17.2A – Inverter output: 0-480V, 3-phase, 14.0A, 7.5HP – Duct connection: 222/563mm to D400mm, plus D750/D600mm reduction Condition: Barely used (~4 months), technically flawless, fully functional. New price (Dec 2025) CHF 8,507.45 incl. VAT. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). Buy with confidence: purchased Dec 2025, used ~4 months for hay drying/drying container, technically flawless. Inverter can be demonstrated running under load; nameplate photos and a running video available. In-person inspection in Kerns OW by appointment. Why buy now: near-new, factory-configured Swiss unit sold as one complete set - fan, inverter, cone, reduction and hose stay together. Once sold, this configuration won't return at this price. Discount if you're quick: if you buy it till 31.10.2026, we give you a 500CHF discount on the price. Action: send your intended application, required capacity and destination - we'll confirm suitability and a transport estimate.

Condition: excellent (used), Year of construction: 2014, Aerzen blower stage after complete overhaul. 12 months warranty. Rcedov Rmnwjpfx Akijh

Condition: used, Van Aerzen blower GMA 10.0, 1.77 m3/min GLA 10.0, 3 m3/min GM3S, 2.82 m3/min See our other listings VMA Wekerom Rjdpfx Aozcfd Eekiech

Condition: used, Year of construction: 2020, operating hours: 27,008 h, functionality: limited functionality, machine/vehicle number: 7633193000003100, power: 16 kW (21.75 HP), overall weight: 8,000 kg, total width: 1,900 mm, total length: 6,000 mm, total height: 1,700 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, control cabinet height: 1,600 mm, control cabinet length: 400 mm, control cabinet width: 1,000 mm, temperature: 100 °C, input frequency: 50 Hz, operating pressure: 6 bar, Equipment: documentation/manual, hot water, type plate available, For sale: Viessmann Vitoflex 300-UF wood chip heating system (2020) – 216 to 720 kW. Highly efficient wood chip heating system for industrial applications with very low emissions. Ideal for agricultural operations, industrial heating systems, or municipal district heating networks. The complete system includes: • Fine dust filter for particularly low-emission combustion. (Schräder exhaust technology Nat E-Filterbax-4-D300) • Automatic fuel feed. • Control cabinet and control system. • Professionally maintained – in very good condition. Technical data: • Manufacturer: Viessmann. • Model: Vitoflex 300-UF. • Power output: 216 – 720 kW. • Year of construction: 2020. • Operating hours: 27008 h. • Fuel: Wood chips. Additional information: • Complete technical documentation and maintenance records available upon request. • Dismantling and transport possible by arrangement. Rcodpfx Aksxvb Tbsish • Used system, sold as is, without warranty. Location: Netherlands. Inspection possible by appointment.

Condition: used, Year of construction: 2021, _____Fendt 4-rotor hay tedder, model 12545 Year of manufacture: 2021 Mechanical operation No Isobus Low operating hours Immediately ready for use Rcodpozknxtsfx Akioh Price: 29,000.00 Euro (net) 34,510.00 Euro (including 19% VAT) Location: null

Condition: used, Keller Lufttechnik MKR 063-55 Fan Airflow rate: 37,000 Nm³/h Total pressure difference: 3400 Nm³/h Specific gas weight at 20 degrees Celsius: 1.2 kg/m³ Motor power: 55 kW Fan speed: 1475 rpm Year of manufacture: 1987 Item condition: used Rodpeh Dpxaefx Akiech You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2006, Gas boiler, Viessmann Vitoplex 300 TX 3, year of manufacture 2006, output 1750 kW, including control system, including gas burner. The gas heating system is fully functional. Disassembly must be carried out by the buyer! Rjdpfx Akovgcqyeisch

Condition: used, RMS Rodozdta Aspfx Akisch Type: SW 3009 RMS Vibration Exciter RMS Vibration Exciter SW 3009 with side-channel blower SKP49033-01/06 Type: SW 3009 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: used, mileage: 1,128,656 km, power: 308 kW (418.76 HP), first registration: 06/2018, fuel type: diesel, tire size: 315/80 R22,5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 7,220 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, parking heater, power mirror, = Additional Options and Accessories = - FCW - Blower - GEN2 TACHO - Speed limiter - Bright lights - Compressor - LDWS - Alloy wheels - PTO - Radio - Rotating lights - Sleeper cab - Side fender - Sun visor - VEB - Xenon = Notes = Welgro blower, max. 1–4 bar pressure GEN2 V2 tachograph Air conditioning Auxiliary heater Xenon headlights Fog lights Refrigerator Crack in the windshield Compressor FCW PTO VEB = Additional Information = General Information Model year: 2026 Cab: Globe License plate: 00-BKT-4 Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Axle Configuration Axle brand: Anders Brakes: Disc brakes Front axle: Tire size: 315/80 R22.5; Max. axle load: 8000 kg; Steered; Tire tread left: 40%; Tire tread right: 40%; Suspension: Parabolic suspension Rear axle: Tire size: 295/80 R22.5; Double tires; Max. axle load: 11500 kg; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40%; Suspension: Air suspension Weights Unladen weight: 7,060 kg Payload: 12,440 kg GVW: 19,500 kg Interior Interior: gray Number of seats: 2 Maintenance APK (Technical Inspection): valid until 06.2027 Condition Overall condition: average Technical condition: average Optical condition: average Product Safety Rjdpfez Ima Usx Akijch Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: excellent (used), Year of construction: 2009, 1. For sale is a fully functional and very well-maintained gas burner from Weishaupt, model G60/2-A, with a Dungs DN65 gas line, control cabinet, burner control system, operating unit, control device, and frequency converter. Rodpfx Aehitrxskisch Burner type: G60/2-A. (Two units are available) Output: 800 - 6100 kW Design: ZM-NR Year of manufacture: 2009 - Delivery is possible upon request. - All technical data can be seen in the images. Preferably sold to dealers, commercial enterprises, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical and data transmission errors.

Condition: used, Year of construction: 2008, operating hours: 2,467 h, machine/vehicle number: LC690, Used AMER filling line for still water PET, 5000 BPH, 2 blowersTechnical Specifications & Performance DataThis used bottling line is configured for still water in PET bottles and combines bottle production, conveying, rinsing, filling, capping, labeling and secondary packaging. The line includes two SMF COMBI 400 automatic PET bottle blow molding machines, an AMER rinsing-filling-capping monoblock, a SACMI LABELLING OPERA 200 RF labeling machine and an AMER shrink wrapper.Filling capacity: 4,000–5,000 bph for bottles with 30/25 mm necks.Blowing capacity: up to 4,000 bph on 1.5L bottles through two SMF COMBI 400 blowers.Labeling capacity: 12,000 bph.Shrink-wrapping capacity: 300 packs/h.Bottle range: 0.25L to 2.5L for the blow molding section.Available mold formats: 0.33L, 0.6L, 1.5L and 5.0L, depending on the machine section.Filling monoblock configuration: 16/18/6.Required installed power: 120 kW.Required hall surface: approximately 500 m².Advanced Automation & Control SystemsThe PET bottle blow molding section uses infrared preform heating with 8 segments, 14 lamps and 550 mm heating elements. The SMF COMBI 400 machines operate with a 400 V, 3-phase, 50 Hz supply and have an installed power of 56 kW per machine. The labeling machine operates at 400 V, 50 Hz and is rated at 28 kW and 47 A.The AMER filling monoblock integrates rinsing, filling and capping in a compact process block. It is equipped with a HEPA filter and an integrated CIP aggregate with disinfection, supporting hygienic beverage production and efficient internal cleaning procedures.Production Line Integration CapabilitiesThis complete bottling line is designed as an integrated PET packaging solution for still water production. Preforms are handled by the SMF hopper and supplied to the blow molding machines, while air conveying transfers formed PET bottles toward the filling section. After rinsing, filling and capping, bottles are labeled with OPP foil and transferred to the shrink wrapper for pack formation.Machine typeManufacturer / modelYearBlow Molding MachineSMF Maschinenfabrik GmbH / COMBI 4002009ChillerSMF Maschinenfabrik GmbH / HT-6A2008Filling MonoblockAMER / BLOCK2008Labeling MachineSACMI LABELLING / OPERA 200 RF2008Shrink Wrapper Rjdpfxj Adtttj Akioch

Condition: used, Year of construction: 1993, functionality: limited functionality, nominal heat output: 500 kW (679.81 HP), heating capacity: 500 kW (679.81 HP), operating pressure: 4 bar, Equipment: type plate available, Urbas reciprocating grate heating system with primary and secondary blower, cyclone, hydraulic fuel discharge with push rod (no auger), all hydraulically operated for coarse material. Some boiler passes are welded. Complete with control unit, has been in operation until now; plant is being dismantled due to relocation. Fireclay lining in very good condition. Redpfsyk Sgcjx Akioch

Condition: excellent (used), Year of construction: 2004, For sale is a functional and very well-maintained gas burner from the Weishaupt brand, including gas piping (Dungs DN 80). 1. Redpfxjwg Hg Ro Akisch Gas burner WEISHAUPT G11/1-D - 4750 kW, with control unit and gas piping. Output: 900-4750 kW Design: ZMD Year of manufacture: 2004

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 90 kg, total length: 4,900 mm, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, gas tube heater Solaronics TU.E 23 more pieces in stock production year: 2020-22 heat output: 23kw gas burner + exhaust fan Rcedpfoq Hu Afjx Akish pipe length: 2x 4.9 meters G20.1 Nominal connection pressure: 25 mbar Nominal gas consumption: approx. 2.5 m3/h Gas connection: 1/2 " Connection voltage: IP21 AC 230V 50Hz

Condition: good (used), Year of construction: 2002, functionality: fully functional, input frequency: 50 Hz, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Redpfx Aju A Illjkiech Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm weight 110 kg

Condition: used, functionality: unexamined, machine/vehicle number: RHE E 180 MF, input voltage: 380 V, suction capacity: 1.692 m³/h, HVB Hansa Blower / Fan Manufacturer: Hansa Ventilatorenbau Model: RHE E 180 MF Capacity m3/h: 1,692 Power kW: 1.5 Rcsdpoxixqwsfx Akioh Voltage: 380 Volt.

Condition: like new (used), functionality: fully functional, type of input current: DC, input voltage: 230 V, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, Industrial Gas Infrared Heaters Lersen COMPACT TOP COUT08 – 2 Units For sale: 2 industrial gas-fired infrared radiant heaters, Lersen CZ COMPACT TOP, model COUT08. Suitable for heating production halls, warehouses, workshops, and other large industrial spaces. Technical specifications: Manufacturer: Lersen CZ s.r.o. Type: COMPACT TOP Model: COUT08 Quantity: 2 units Fuel: G20 natural gas Rated input: 37–48 kW Rated heating output: 33–43 kW Gas consumption: 3.5–4.6 m³/h Electrical connection: 230 V / 50 Hz Electrical consumption: 70 W CE marked Made in the Czech Republic Both units are being sold together. The condition can be seen in the photos. Price for both units: €1,250 Rcsdpfx Aozvainekioh Location: Ivanka pri Nitre, Slovakia For further information or additional photos, please contact me via message.

Condition: new, functionality: fully functional, Year of construction: 2023, overall weight: 39 kg, extraction blower, wall-mounted fan high-performance fan, axial fan Industrial axial fan 800mm diameter ZIEHL-ABEGG fn80-sdi.6n.v7 NEW! Sold in a box of several pieces manufacturer: ZIEHLL-ABEGG Rsdpfxow U T E Ie Akijch type: FN080-SDI.6N.V7 Axial fan with sickle-shaped aluminum blades air flow: 10000-24000m3/h nominal air flow: 15800m3/h at 140pa air pressure motor power: 1.15kw/0.53kw Nominal values 3. phase~400V D/Y 50Hz 1.55/0.95kW 3.3/1.7A rpm:850/650/min Protection type:IP54 sound level:70 dB COSY 0.69 max temperature range:80°C Motor protection: thermal contact Protective grid type: mesh grid Dimensions (w x h x d) mm: 861 x 861 x 273

Condition: excellent (used), Year of construction: 2015, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Z000071400101, total width: 1,400 mm, total length: 2,050 mm, total height: 2,150 mm, type of input current: three-phase, overall weight: 1,100 kg, Powerful industrial blower suitable for a variety of applications. The stationary fan with a 600 mm diameter can be used for cooling, ventilation, heat dissipation, or for displacing water mist and dust. The unit has four rollers and forklift pockets for loading. Electric motor power (blower): 15 kW Air flow rate: 33,000 m³/h Speed: 13.8 kW / 1470 rpm Electrical connection: 400 volts / 50 Hz / 32 amps Cable length: 5.0 m Redpewbfm Sofx Akioch Pickup and inspection available in D-89188 Merklingen.

Condition: used, Centrifugal fan, Fan, Exhaust fan, HRV 56N-400/M GL 360, used machine Manufacturer: Venti Oelde Type: HRV 56N-400/M GL 360 Overall dimensions: 1050 × 1120 × 1010 mm Weight: 280 kg Airflow capacity: 14,400 m³/h Rjdpfjzwz Tdex Akiech Year: 2014 Electrical data: 22 kW, 400 V, 50 Hz, 39 A

Condition: new, Year of construction: 1988, For sale: a mobile industrial fan from the times of the GDR, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), with a 0.75 kW motor from the USSR. Robust steel construction on wheels – ideal for dust extraction, blowing, local ventilation, or cooling machines. Technical specifications: Rjdpjz Sb Dfefx Akiech • Airflow: 1020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power consumption: 0.5 kW • Maximum operating temperature: 35°C • Year of manufacture: not fully determined – probably 1980–1990 Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Made in: USSR Advantages: • Compact and mobile design • Efficient drive, ready for operation • Suitable for workshops, paint shops, ventilation, and burners.

Condition: used, functionality: fully functional, Year of construction: 2021, overall weight: 4,850 kg, Equipment: front power take-off, Manufacturer: Krone Model: Swadro TC 1250 Year of purchase: 2023 Used, with signs of wear, good condition Important information: A functional video can be sent upon request. Technical data according to the manufacturer: Four-rotor center-delivery rake Working width: 9,800 - 12,500 mm Swath width approx. 1,400 - 2,200 mm* Transport width approx. 2,990 mm Transport height: approx. 3,990 mm Weight approx. 4,850 kg (base machine) Rotor diameter: Front: 3,300 mm, rear: 2,960 mm Eleven tine arms in front, 13 tine arms in the rear Max. PTO speed 540 rpm Power requirement approx. 59 kW (80 hp) Required hydraulic connections: 1 x single-acting, 1 x double-acting Standard equipment: Mounting Two-point mounting bracket (Cat II) incl. pivoting suspension via ball joint and roller Two-leg support Drive train Rotor gearbox with maintenance-free grease filling, completely hardened KRONE Dura-Max cam track KRONE Easy-Line drive concept (front rotor pair rotates approx. 25% faster than the rear) Rotors individually protected by overload clutch PTO shaft, wide-angle joint on one side, 1 3/8", Z=6 Drive train with freewheel Rotors + rotor chassis Cardan rotor suspension incl. Krone Jet effect, mounting of the tine arms by means of maintenance-free ball bearings Four 10.5 mm trailing double tines per arm with a large coil diameter and "lift effect" Tines mounted to prevent loss around the tine arm Rotor height adjustment by hand crank incl. rotor height indicator Easy operation via hydraulic control unit, incl. follow-up control of the rotors Hydraulic relief of the front rotors, spring relief of the rear rotors Four-wheel rotor chassis incl. four trailing feeler wheels Rotor tires: 4 x 16x6.50-8 each Rcedpfx Akoz Hvldjish Additional equipment: Warning signs and LED lighting Operation via pre-selection control box and tractor-side control valves additionally with: - Tires Vredestein Flotation 500/50 R 17 - Middle swath curtain (hydraulically pivoting) - Hydraulic single-rotor lift via pre-selection switch box (electric) (lifting of the front rotors) including paired lifting of the rotors + 1 single-acting hydraulic valve

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 570 kW (774.98 HP), overall weight: 4,000 kg, type of input current: three-phase, pressure: 6 bar, temperature: 120 °C, Equipment: documentation/manual, hot water, type plate available, Mobile oil-fired heating system in a 20-foot container – Buderus 570 kW / Weishaupt burner – Year of manufacture 2023 (can also be converted to gas operation) We are selling our mobile oil-fired heating system because we have switched to solar energy. This system served as an emergency or supplementary heating system for us, is 100% ready for operation and is sold as is – including stainless steel chimney, electrical distribution panel and complete interior fittings. Technical data: Boiler: Buderus Logano plus GE615, output 511–570 kW (rated output), max. 120 °C, 561 l water content, PMS 6 bar Burner: Weishaupt WM-L10/3-A monarch, T-3LN multiflam®, year of manufacture 2023, heating oil EL (200–900 kW), NOx class 3 Power supply: 230 V / 400 V, 50 Hz, protected by Hensel main distribution panel (3x63 A) with CEE connections Container: Rjdpjy Sz Ruefx Akioch 20-foot standard container (approx. 6.06 × 2.44 × 2.59 m), approved for road transport, insulated and equipped with lighting Stainless steel chimney mounted externally, tensioning cables included Complete internal piping with insulation, circulation pumps, water treatment Flexible in terms of fuel: The Buderus GE615 is a condensing oil/gas boiler and can be converted to gas operation with a single adjustment (replacement or modification of the burner) – perfect for locations with a gas connection. Possible applications: Ideal as a mobile large-scale heat source for construction projects, larger building complexes (e.g. as interim heating until the final heating system is commissioned), heating for large halls or for supplying hot water to larger projects. After connecting the piping or via hoses to the existing taps, it is immediately ready for operation. Procedure: The piping will be disconnected from the tap by us. Afterwards, the container can be picked up with a suitable truck (container transport) and set up at the new location. For commissioning (and possibly conversion to gas operation), we strongly recommend involving a qualified plumbing/heating specialist so that all settings on the boiler and burner can be made professionally. Original purchase price 2023: approx. 150,000 € Selling price: 65,000 € negotiable – serious offers are welcome, just write to us. Inspection possible at any time by appointment. If you have any questions, please do not hesitate to contact us!

Condition: good (used), Year of construction: 2006, functionality: fully functional, power: 2.2 kW (2.99 HP), Type GFE 2.2 Rcedoxhdy Ijpfx Akijh Year of manufacture: 2006 Power: 2.2 kW Includes accessories PRICE REDUCTION FROM 1250 TO 950 EUR!!!

Condition: used, used fans from various manufacturers and with a wide range of performance characteristics: Rsdpfxez Ef Sks Akiech - Klima Celje 104CVX560, 75 kW - RVM 02/71-80, 4 kW - 2 x SPELLNA VRU-35.1-200, 7.5 kW - MHI 71, 11 kW - 2 x WOODS, 36 kW - VENTA MHI 31.5-50, 7.5 kW - RKR K40R, 6.8 kW