Used Haas St 20 Y for sale (229)

Condition: ready for operation (used), CNC lathe, Haas TL-2HE, year 2008 Dodpfx Afjx Nr D Hs Uoki

Condition: used, Year of construction: 2010, x-travel 508 mm y-travel 356 mm z-travel 508 mm Dkjdpfxexyafwe Af Usi table dimensions 508 x 324 mm spindle tunring speed 10.000 U/min Tool cone CAT 40 spindle drive 15 kW tool magazine 24 Stationen rapid traverse 25,4 m/min feed 18,03 m/min weight 6,5 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Operating hours approx. 20,851 hours Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: refurbished (used), Year of construction: 1991, HAAS drum chipper type HTH-160x510 L2WV completely refurbished / reconditioned with new bearings (spherical roller bearings) and tested rotor New knives and counter knives Feed width/height: 510 x 160 mm Rotor diameter: 500 mm Screen perforation: 60 x 60 mm Drive power: 45.0 kW Feed motors: 2 x 2.2 kW Weight: approx. 3,000 kg Machine colour: RAL 6011 Reseda green Without electrical installation incl. control cabinet with all installations relating to the system in accordance with CE standard. Operation on the cabinet door, without cable Dodpfx Ajw H Eqzsf Ujki 1 unit Vibrating conveyor type HVSR 500x8000 completely refurbished / reconditioned with new bearings (spherical roller bearings) and tested oscillating elements Chute width: approx. 500 mm Chute length: approx. 8,000 mm Chute height: approx. 170 mm Wall thickness: approx. 5 mm Feed height feed: approx. 450 mm Total height feed: approx. 770 mm Discharge height discharge: approx. 950 mm Total height discharge: approx. 1,120 mm Drive power: approx. 4.0 kW Weight: approx. 1,400 kg Machine colour: RAL 6011 Reseda green Rising vibrating chute (approx. 4.5 °) incl. screening zone 15 x 15 mm, L = 500 mm incl. metal-free zone made of wood, new (L = 1,500 mm) incl. metal detector, second-hand without electrical installation 1 unit HAAS scraper chain conveyor type HKF-490x11,000 completely refurbished / reconditioned with new bearings, tested conveyor chain and flights Width: approx. 500 mm (600 mm) Length: approx. 11,000 mm Trough height: approx. 570 mm With bottom curve: 45° Total height: approx. 6,700 mm Drive power: approx. 5.5 kW without electrical installation

Condition: refurbished (used), functionality: fully functional, Vibro screen type HVSM 1000x3500 generally reconditioned (workshop refurbished) with new bearing (spherical roller bearing) and new oscillating elements Make: HAAS Year of manufacture: 1996 Condition: good ( reconditioned) Channel width: approx. 1000 mm Channel length: approx. 3500 mm Gutter height: approx. 150 mm Wall thickness: approx. 5 mm Discharge height: approx. 150 mm Total height: approx. 300 mm Screening capacity: approx. 10 m³/h (for wood chips and sawdust) Fractions: 2 Screen area: approx. 2.2 m² per screen mesh size Screen decks: 1 piece (screen zone D = 10 mm, L = 2,200 mm) Drive power: approx. 4.0 kW Weight: approx. 800 kg Machine colour: RAL 6011 Reseda green without electrical installation Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - waste wood Dsdpfxswqx Hks Af Uski - bark Screening machine | vibrating screen | vibro screen | vibro screening machine | vibrating screen | wood chip screen | screening machine for wood chips | screening machine for cogeneration plant

Condition: used, Year of construction: 2021, HAAS MINIMILL 2 Djdoyaqtaopfx Af Ueki Year: 2021 Table size: 1016 mm x 356 mm X-axis travel: 508 mm Y-axis travel: 406 mm Z-axis travel: 356 mm Spindle: SK40 Spindle speed: 0-6000 rpm 2x Renishaw probes Tool changer: 20 tools Approximate weight: 2313 kg

Condition: ready for operation (used), Year of construction: 2018, 3-axis machining center Brand: HAAS Type: VF3 Year: 2018 CN: HAAS Equipped with: 30+1 position tool changer Chip evacuation screw 20 bar center coolant 10,000 rpm spindle Specifications: Dsdpfjvlk R Eox Af Uoki Table surface 1219 x 457 mm X-axis travel 1016 mm Y-axis travel 508 mm Z-axis travel 635 mm Max. load. on table 1588 kg Spindle speed 1 - 10,000 rpm Spindle power 22.4 KW Spindle taper ISO 40 Rapid feed 25 m/min Machine dimensions approx. 2997 x 2794 x H 3048 mm Weight approx. 5600 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 406 mm Travel Z-axis: 508 mm Table length: 914 mm Table width: 356 mm Table load capacity: max. 680 kg Spindle speed: 12,000 rpm Feed Rapid traverse X-axis: max. 35.6 m/min Rapid traverse Y-axis: max. 35.6 m/min Rapid traverse Z-axis: max. 35.6 m/min Tool Changer Capacity: 24+1 Tool holder: CAT 40 Max. tool diameter: 76 mm Dkedox Up Dhepfx Af Uei Tool change time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Machine weight: 3,629 kg

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 1097415, functionality: fully functional, travel distance X-axis: 508 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 318 kg, overall weight: 6,350 kg, table width: 508 mm, spindle speed (min.): 10,000 rpm, table height: 324 mm, Technical Data BRAND: Haas MODEL: MDC-500 SERIAL NUMBER: 1097415 Year: 2012 Numerical Control: Haas Location: Tabaza (Asturias- Spain) TABLE DIMENSIONS Table surface: 508x324 mm. Number of tables: 2 Maximum weight on the table: 318 kg. RANGE Longitudinal travel X: 508 mm. Transversal travel Y: 356 mm. Vertical travel Z: 508mm. SPINDLE Cone: BT40 Spindle speed: 10.000 r.p.m. 22.4 Kw 122 Nm ATC Capacity: 24 Station Tool change time: 4.8s ADVANCES Working feeds: 21.2 m/min Dkedpfx Afotr Uflj Uji Rapid feeds: 25.4 m/min WEIGHT AND DIMENSIONS Machine dimensions: 3.632x3.404x2.870 mm. Machine weight: 6.350Kg. ACCESSORIES Programmable coolant Chip conveyor Renishaw T527R probe

Condition: excellent (used), Year of construction: 2013, Haas-Mondomix -Buhler , A-15, 2013, continuous aerator for mixing and Djdpfxef Azwze Af Ueki whipping, marshmallow & nougat, choco pie, chocolate and creams for sugar confectionary and bakery with Touch screen control, with product pump In good condition. with mondotherm

Year of construction: 2006, condition: used, centre height 175 mm centre distance 300 mm number of spindle speeds 2.000 - 8.000 control SIEMENS 840D machine weight ab. 7.500 kg surface area 1.000 x 270 mm number of T-slots 3 groove width 12 H7 mm flute distance 50 mm spindle diameter in front bearing 55 mm Tool and Cutter Grinder | HAAS - MULTIGRIND AF1 Additional equipment: Dkedpfjmd Didox Af Uji - Tool laser measuring system: Blum - Lasersystem MINI-MICRP-NANO The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: AF 1 | AF-1

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 70161, TECHNICAL DETAILS turning diameter: 760 mm turning length: 864 mm turning diameter over bed slide: 450 mm longitudinal travel: 864 mm cross slide travel: 287 mm spindle speed (infinitely variable): 0 - 3,400 rpm spindle bore: 105 mm MACHINE DETAILS operating voltage: 400 V Connected load: 28 kVA Space requirement approx. 3.2 x 2 x 2 m EQUIPMENT - 12-fold turret - power chuck Dedpfoizwwmox Af Uski - large spindle bore - tool presetting

Condition: refurbished (used), Year of construction: 2005, operating hours: 14,923 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 305 mm, feed length X-axis: 762 mm, feed length Y-axis: 406 mm, feed length Z-axis: 305 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 41246 - Manufacturing date: 04/05 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 406 mm - Z-axis travel: 305 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 507 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers Dksdpfoyanlajx Af Usi - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,500 kg, table width: 1,219 mm, table length: 457 mm, TECHNICAL DETAILS Travel Distances X-Axis: 1,016 mm Y-Axis: 508 mm Z-Axis: 635 mm Workpiece Table size: 1,219 mm x 457 mm Maximum workpiece weight: 1,500 kg Spindle Spindle taper: BT-40 Spindle speed: 7,500 rpm Spindle motor: 14.7 kW MACHINE DETAILS Dksdpfjxgpp Sex Af Uji Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,450 x 2,850 mm Weight: 5,600 kg EQUIPMENT 20-position tool changer Programmable coolant nozzle Through-spindle coolant supply Low voltage lighting Chip conveyor

Condition: ready for operation (used), Year of construction: 2012, operating hours: 18,699 h, functionality: fully functional, machine/vehicle number: 1095132, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table width: 457 mm, table length: 1,321 mm, TECHNICAL DETAILS Travel X-axis: 1,270 mm Y-axis: 508 mm Z-axis: 635 mm Table Length: 1,321 mm Width: 457 mm Max. load: 794 kg Spindle Speed: 12,000 rpm Drive system: Inline Direct Drive Power: 22.4 kW Max. torque: 122 Nm at 2,000 rpm Feeds Rapid traverse X / Y / Z: 35.6 m/min Max. cutting feedrate: 21.2 m/min Tool Changer Capacity: 24+1 Type: CT 40 Max. tool diameter: 76 mm Tool-to-tool time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Dimensions Height: 3,023 mm Width: 3,886 mm Depth: 2,667 mm Operating Hours Cycle start time: 18,699 h Power-on time: 23,179 h EQUIPMENT 40 + 1 position tool changer, BT40 High-pressure spindle coolant 63 bar (TSC 1000) Coolant tank 360 liters Chip conveyor, spiral type 4th axis HRT 210, 210 mm including tailstock Dodpexb Uhiofx Af Uoki Wireless Intuitive Probe System (WIPS R) Renishaw OTS tool setter Renishaw measuring probe Intuitive Programming Screen (IPS) Programmable coolant nozzle (P-Cool) Approx. 15 tool holders

Condition: ready for operation (used), Year of construction: 2008, operating hours: 23,838 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 7,500 rpm, Submitting a bid obligates you to collect the item on time by 30.01.2026! TECHNICAL DETAILS Travel X-axis: 1,270 mm Travel Y-axis: 508 mm Travel Z-axis: 635 mm Spindle speed: 7,500 rpm Table size: 1,320 mm x 455 mm T-slots: 14 mm MACHINE DETAILS Operating hours: 23,838 h Tool changes: 300,000 EQUIPMENT SK 40 taper with 40-position automatic tool changer Note: The two vices are not included in the scope of sale and delivery. Djdpfx Afox Nvv Ho Uski

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,982 h, functionality: fully functional, Haas VF-8/40, year of manufacture 2008 The machine was purchased in 2008, is fully functional, and can still be used as normal. All tools and accessories are included. Further technical details can be found in the attached images. Viewings can be arranged by appointment if interested. Dodpsxcvz Hefx Af Ueki

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC HAAS VF-2SS 2011 2 units CNC HAAS VF-2SS Dkedpfx Afeyh Rwxj Usi 2011 Fully functional

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC HAAS VF-1 2011 2 units CNC HAAS VF-1 Fully functional Dksdpfx Afjyh Rwro Uji

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance Z-axis: 1,219 mm, rotational speed (max.): 2,000 rpm, travel distance cross slide: 203 mm, Flatbed Lathe Dkedpowftdmsfx Af Uoi Manufacturer: Haas Type: TL-2 S/N: XXXXX Year of Manufacture: 08-2005 On-time hours: n/a Control: Haas CNC Technical Parameters: ----- - 4-way tool post with Parat quick change system - Z travel: 1,219 mm - X travel: 203 mm - Swing over bed: 406 mm - Swing over slide: 282 mm - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3 Parat cartridges - 3-jaw chuck - Documentation

Condition: used, Year of construction: 2008, turning diameter 432 mm turning length 864 mm control HAAS bar diameter 76 mm 3-jaw-chuck diameter 254 mm travel -z axis 864 mm travel -x axis 287 mm spindle speed: 3400 1/min spindle bore 88 mm swing over bed 762 mm swing diameter over bed slide 432 mm turret head 12 Pos. VDI 40 drive capacity - spindle motor 22 kW voltage 400 V weight of the machine ca. 7.250 t dimensions of the machine ca. 3,90 x 2,00 x 1,90 m - serial-no.: 3082298 - Machine Run Time: ---- h - control: HAAS Dsdpfoupmhwox Af Ueki - tool measuring arm - chip conveyor - collant equipment

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,200 h, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,000 rpm, table diameter: 635 mm, TECHNICAL DETAILS Travel X-axis: 1,016 mm Travel Y-axis: 635 mm Travel Z-axis: 635 mm B-axis: 120-35 ° C-axis: 360 ° Spindle: SK 40 Speed: 8,100 rpm Table diameter: 635 mm Tool changer: 30 stations MACHINE DETAILS Number of axes: 5 Operating hours Power-on time: 4,300 h Cycle time: 2,200 h EQUIPMENT Control panel with touchscreen Network interface Wi-Fi connection Dedpex I Ag Aefx Af Ujki 1 GB part program memory Power failure detection module Control cabinet with air conditioning unit Wireless measuring system Coolant unit Programmable coolant nozzle Prepared for retrofitting internal coolant supply Hinged belt chip conveyor

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2808, total height: 2,400 mm, total length: 3,300 mm, total width: 2,200 mm, feed length X-axis: 450 mm, feed length Y-axis: 250 mm, feed length Z-axis: 350 mm, overall weight: 7,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, CNC grinding center for external, internal, and profile grinding with three linear axes and a swiveling grinding head. Modularly configurable for various grinding tasks, featuring automated dressing cycles, modern control system, tool management, and options for measurement systems as well as peripherals such as coolant treatment and extraction. Dksdpfexuichsx Af Usi

Condition: used, X Axis 30.0 in 762 mm Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Ready for delivery Dkodpfsiypzdox Af Uji

Condition: good (used), Vertical machining center, Haas DM-2, year 2017. Djdjxrg Txopfx Af Ueki

Condition: used, Year of construction: 2020, Used Machining Center Djdpfsxqc H Sjx Af Uski Brand: Haas Model: TM-2P Year: 08/2020 Serial Number: 1170479 Operating hours: Spindle on time: 12,000h Specifications: - Travels (X, Y, Z): 1016mm, 406mm, 406mm - Spindle to table distance (Min. - Max.): 102 - 508mm - Spindle speed: 6000 rpm - Spindle power: 5.6 kW - Taper: BT 40 - Tool changer carousel: 10 positions - Maximum tool diameter: 89mm (adjacent) - Maximum tool weight: 5.4kg - Coolant pump kit - HAAS CNC - Table dimensions: 1466x267mm - Maximum table load: 159kg - Maximum feed rates on all three axes: 10.2m/min.