Used Guest Room for sale (898)

Condition: like new (used), functionality: fully functional, A cold storage room is offered, approximately 6 sq m without a refrigeration unit. Bedpfevzk Rwex Acvolf Length: 3.9 meters Width: 2.4 meters High: 2.05 meters

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos. Bledpfxoq H H Rus Acvef

Condition: good (used), Viessmann cooling/freezing chamber External dimensions: 5700 x 3000 x 2450 mm Bsdpfxeiauifj Acvslf Internal dimensions: 5420 x 2700 x 2150 mm Plate thickness: 150 mm Stock status: 1 piece The chamber is easy to assemble Aggregate and cooler included We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Main Components of a Sandblasting Room Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Removes airborne dust and maintains clean air inside the room. Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Operator Equipment: Blsdoxr Am Ujpfx Acvef The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 KO - 6 15.000 x 5.000 x 5.000 KO - SPECIAL 27.000 x 18.000 x 9.000

Condition: used, Pneumatic chain hoist, crane, indoor crane, assembly crane, air-operated chain hoist, compressed air chain hoist, compressed air chain hoist, pneumatic chain hoist -Manufacturer: BroomWade, pneumatic chain hoist type MLHI10A -Load capacity: 500 kg -Chain length: 3100 mm -Dimensions: see photos Blodpeuu U Trjfx Acvef -Transport dimensions: 260/230/H300 mm -Weight: 18 kg

Condition: ready for operation (used), Year of construction: 2020, Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible. Bjdpfxsxl Upbe Acvolf

Condition: new, Product driven flow divider The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Includes 1 nozzle per exit (round, square, triangular or rectangular) with a maximum outer diameter of 40 mm Product temperature up to ± 80 °C With universal connection Bjdpfoywg Enox Acvjlf With pneumatique knife 3 exits belt width 25 cm With support frame in height adjustable New

Condition: used, Product driven flow divider The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Suitable for nozzles of max. 40 mm diameter. Width belt: 400 mm Product temperature up to ± 80 °C With universal connection With pneumatique knife 6 exits With support frame in height adjustable Bljdpfx Acjyn Dckevsf

Condition: excellent (used), mileage: 454,401 km, first registration: 08/2005, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel-air, total length: 11,000 mm, total width: 2,580 mm, total height: 3,840 mm, loading space length: 8,650 mm, loading space width: 2,450 mm, loading space height: 2,210 mm, Year of construction: 2005, Cooling unit brand: Carrier = Further information = Technical information Number of cylinders: 6 Front axle: Steered; Suspension: leaf spring Rear axle: Twin tyres; Suspension: air suspension Weights Unladen weight: 11,340 kg Payload: 7,660 kg Gross vehicle weight: 19,000 kg Blsdpjxtfmmofx Acvsf Functional Refrigeration engine: Diesel and electric Condition Technical condition: very good Visual condition: very good Further information Contact Thierry Leemans for more information.

Condition: new, Year of construction: 2020, operating hours: 200 h, functionality: fully functional, SHOWROOM machine, the advertised machine was never delivered and was only run for test purposes. Rotating doypack wrapping machine DEAP-8BT: The 8-station rotating horizontal filling and sealing machine fills and seals doypack stand-up and seals Doypack stand-up pouches with cycle times of up to 50 pieces per minute. minute. The compact design of the rotary machine is very space-saving and flexibly adjustable to different bag widths. The rotary-type machines in the AP series are the cost-effective alternative to complex linear filling machines without time-consuming set-up times. The stand-up pouches are transported via a transported via a bag magazine and filled and sealed in 8 rotating workstations. sealed. Applicable products: The DEAP-8BT series reliably packs - Pet food - Cosmetics (shower gel, soap) - Food (e.g. muesli or dried fruit) dried fruit) - small parts Machine information: - Quick format change of the bags - Additional modules can be integrated (gas flushing, weighing systems, double sealing) - Touch panel control, with storable programs programs - Central gripper adjustment - Customized special design - for special widths or special feeding systems - up to 50 pieces/min (depending on bag size) Other information: - Safety standards: CE conformity, DIN standards - Noise level: Below 80 decibels according to DIN 45635 - Applicable bag types: Pre-made stand-up pouches, flat pouches, spout pouches, pressure seal pouches, slider pouches, Bledpfx Ajtuwf Ejcvsf gusseted bags, single-lip (depending on optional components - Film types: OPP/CPP, OPP/CE, PET, PE, laminated films, composite films - Product types: piece goods (screws, nuts, etc.), bulk goods (flour, nuts, etc.), liquids (sauces, paints, etc.) This advertisement refers to the packaging machine and not the multihead weigher.

Condition: used, mileage: 10,131 km, power: 300 kW (407.89 HP), first registration: 10/2005, overall weight: 24,000 kg, fuel type: diesel, color: yellow, axle configuration: 4x4, empty load weight: 14,300 kg, driver cabin: day cab, gearing type: automatic, emission class: euro2, suspension: steel, Year of construction: 2005, operating hours: 870 h, Equipment: ABS, additional headlights, all wheel drive, differential lock, Base carrier for sweeper: - Boschung - Jetbroom BJB 8000 - Year of construction 10/2005 - 10.131Km - 870 operating hours - Webasto parking heater - Axles: Kessler & Co (72.0748.3 D) - Snow plow mounting plate - Engine: Deutz Diesel 300kw (BF6M1015C), Euro II - Angular gearbox: Röchling 59-16-M-3 - All-wheel drive, dif. locks - Allison 6-speed automatic transmission - Windshield heating - Electr. mirrors - el. FH - 8710mm x 2500mm x 3650mm (lxwxh) - permissible GG: 24.000kg - Vmax: 85 km/h - rear blower motor is removed, vehicle without brush / snow plow You can find a video of this offer on You can find our entire vehicle stock at Bsdpfx Asqxt Rnocvslf Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 200 h, functionality: fully functional, turning length: 300 mm, turning diameter: 240 mm, spindle bore: 61 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 400 mm, spindle motor power: 11 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,860 mm, total width: 1,700 mm, overall weight: 3,400 kg, bar passage: 42 mm, Takamaz XL-150M CNC Lathe – ex-showroom used machine, with virtually zero operating hours, and has never worked any material. The machine is practically new, year 2018, in like-new condition. Equipped with FANUC CNC control, driven tools, and numerous accessories. As seen in the photos, the interior of the machine is perfectly intact, without any processing marks or damage: it has never actually produced chips. Main specifications: Year of manufacture: 2018 CNC: FANUC Series Oi – TD Max swing diameter: 280 mm Max turning diameter: 240 mm Max turning length: 300 mm Bar capacity: 42 mm Spindle bore: 61 mm Spindle: SMW AUTOBLOK 3-jaw chuck Ø 210 mm ASA A2-8 spindle nose Spindle nose height: 1050 mm Spindle bearing inner diameter: 100 mm Spindle speed: up to 3500 rpm Axes: X-axis travel: 190 mm Z-axis travel: 400 mm Rapid traverse: X 18 m/min – Z 24 m/min Turret and tools: 12-station turret Internal/external tool holders: 25x25 mm Boring bar holder Ø 32 mm Indexing time: 0.1 s Driven tools up to 4000 rpm Motors and power: Spindle motor: AC 11/7.5 kW X-axis servo motor: 1.2 kW Z-axis servo motor: 1.8 kW Max absorbed power: 24 kW Dimensions and weight: Overall size with chip tray: 2860 x 1700 x 1880 mm Net weight: 3400 kg Accessories included: Bjdpfx Acevw Ahyjvelf Right-hand conveyor belt chip extractor 1 axial driven tool holder 1 radial driven tool holder 6 static tool holders (2 boring bar holders + 4 tool holders) Included documentation: Lathe instruction manual Programming manual CE declaration of conformity Condition: like new. The machine is ready for immediate delivery and available for on-site testing by appointment or remote inspection via video call.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, container length: 20 ft, color: blue, machine/vehicle number: 022499722, Equipment: bathroom, hot water, lighting, shower, Equipment: 6 pcs. wall reinforcement 2 pcs. sanitary windows with tilt fittings Parapet height: 1,525 mm above finished floor level (FFL) Frame external dimension: 652 x 714 mm Clear window opening: 590 x 528 mm Insulating glazing with gas fill 1 pc. steel external door Construction dimension (width): 875 mm Clear passage width: 811 mm Clear passage height: 2,065 mm Outward opening 1 pc. door stopper Partitions: 2 m interior partition wall Without insulation Coated steel sheet, 0.5 mm, color: white (approx. RAL 9010) 1 pc. internal door Construction dimension (width): 875 mm Clear passage width: 811 mm Clear passage height: 2,065 mm 5 m WC partition wall 3 pcs. WC partition doors, 625 x 2,000 mm Electrical Equipment: 3 pcs. single socket outlet 1 pc. single socket outlet, 350 mm above finished floor level (FFL) 1 pc. double switch 1 pc. double switch Moisture-proof electrical installation 1,150 mm above finished floor level (FFL) Sanitary Equipment: 2 pcs. ceramic hand basins, 500 x 410 mm Incl. single-lever mixer tap Incl. metal mirror Incl. metal hooks Incl. soap dish 3 pcs. WC cubicles incl. toilet and toilet paper holder 2 pcs. floor drains 2 pcs. GRP shower cabins Incl. single-lever mixer tap Incl. shower curtain 1 pc. 300-liter boiler 1 pc. pressure reducing valve 1'' Heating, Ventilation, Cooling Equipment: 3 pcs. exhaust fans, 170 m³ Bledpfjyyw R Hox Acvjf 2 pcs. 2 kW fan heaters

Year of construction: 2026, condition: new, Offered is an attachment block broom Kehrfix in different versions from 1.50 m to 4.00 m width. A pick-up must then still be discussed separately if this is desired (e.g. pallet fork pick-up, shovel hook or Euro pick-up). Bledpfx Acjh T A Tnsvsf An attachment block broom for forklifts, wheel loaders, tractors, mini-loaders, mini-dumpers and many other vehicles and equipment! With various attachments for quick mounting on a variety of vehicles, the KehrFix is the perfect aid for keeping larger areas clean. The KehrFix push brooms are a professional choice for easy and effective sweeping and cleaning. The rugged KehrFix is designed to get the job done quickly and thoroughly in every conceivable application. KehrFix push brooms are high-quality, durable, maintenance-free and universally applicable sweeping systems.

Year of construction: 1999, condition: ready for operation (used), Built in 1999 Bodod N D Ngjpfx Acvjlf Equipment: 4 printroll unwinding stations 0350.0416 • 43470 hours printoll 1 • 47630 hours printroll 2 • 46488 hours printroll 3 • 44802 hours printroll 4

Year of construction: 1999, condition: ready for operation (used), Built in: 1999 Blsdod N D Nhjpfx Acvof Working hours: 14.565 tsd. h Equipment: 1 printroll unwinding station 0350.412-353

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm Bjdpfedr R Tcsx Acvslf - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory no. 2250023, machine comprising: 1 NEW workbench 2000x800 mm with blue Urphen worktop 2000x800x50 mm 1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-25 workpiece holder without gear reducer with clamping key, serviced 1 serviced cross slide 1 reconditioned aligned tailstock 1 380V/50Hz/3ph motor. 2 speeds 1 used W-25 solid centre 1 set of used W25 collets 1 used Reishauer ZMG 2x3 jaw chuck Ø 110 mm on w-25 flange 1 new set of used Multifix tool holders including -1 type A turret with AG20 stud -2 AD1675 chisel holders -2 AD2090 chisel holders 1 Albrecht self-tightening drill chuck, cap 1-13 mm on CM2 tenon, used 1 used CM2 solid centre point OPTION 1 used tensioner with new belt CHF 1000 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: used, functionality: unexamined, Year of construction: 2010, Used sanitary container Self-collection only Location: Wismar area Bjdpfxoyx H Urj Acvolf

Year of construction: 2015, operating hours: 15 h, condition: like new (used), functionality: fully functional, Mobile vacuum cleaners for laboratories and production Cleanroom vacuum cleaner series CR Bedsv I R R Rjpfx Acvslf Safety Change DBGM Pre-separator ES VA

Condition: new, Cucinesse Evolve Kitchen Blodpex Eyrwofx Acvof Showroom display model, unused Evolve Made in Italy The Evolve collection is featured in the "Light On Design" catalog, a curated project celebrating the perfect fusion of artisanal precision and industrial expertise. With its sophisticated design and meticulous attention to detail, the Evolve model creates an inviting and tactilely appealing space where materials take center stage. Manufacturer: Cucinesse Italy Model: Evolve Sand-Beige Type: Kitchen Island Worktop: Trespa Marble Effect Nero Street Worktop Height: 94.5 cm Kitchen Island Length: 362.5 cm Kitchen Island Width: 103.5 cm Kitchen Island Height: 94.5 cm Washbasin: Reginox Undermount 50x40 cm Dishwasher: Beko BDIT38531DC 60 cm Refrigerator: Miele K7733E, 178 cm, 320 Liters, Soft-Close Cooktop: Bora Puxu Induction Cooktop with Extractor, 83x50 cm Tap: Not Included Oven: Not Included Tall Cabinets Length: 300 cm Width: 60 cm Height: 220 cm Without Gaggenau steam oven, Gaggenau vacuum drawer, and Faucet Disassembly and removal by buyer Disassembly by our installation team is also possible (€1200) Item location: Utrecht, Netherlands Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), Bjdexftqdjpfx Acvelf quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Spindle taper 40 Bljdpfx Acsdr E Apjvjf Spindle speeds 40-2000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH

Year of construction: 2024, condition: good (used), functionality: fully functional, For sale: a high-quality cleanroom, recently constructed and previously used for injection moulding production of medical products. The cleanroom was installed in 2024 and is currently being dismantled due to the cessation of activities. General information: • Area: approximately 500 m² • Year of manufacture: 2024 • ISO Class 7 • Previously used in a medical production environment Bledpfxsygl I So Acvof • Cleanroom will be delivered completely empty • All walls and modular panels are included in the sale Design and construction: The cleanroom is built from modular panels, offering maximum flexibility for the buyer regarding reconstruction and layout. This makes the cleanroom particularly suitable for: • Medical injection moulding production • Assembly of medical devices • Pharmaceutical applications • Electronics, cosmetics, precision assembly • Dryroom • Box-in-Box production The modular design allows: • Full freedom to configure the layout according to your requirements. Additional panels can be sourced from the original supplier if needed. • Relocation and reassembly of the cleanroom at a new site (supplier support available). • Easy expansion or downsizing of the space. Condition and availability: • The cleanroom is in excellent condition, recently constructed and professionally maintained. • Dismantling is currently underway, making quick availability possible. • Complete plans and layout details are available upon request. For further information, additional specifications, or to arrange a viewing, please contact us.

Condition: not inspected (used), Lubot & Wakker Type: 1 pallet vacuum chamber Capacity: up to 2.000 Kg (6-8 charges) hr Completely stainless steel Blsdpfx Aefxyqrecvsf Dimensions chamber: L x W x H = 2.200 x 1.700 x 3.400 Weight: 1200Kg Electric: 380V 3P+N+E, 7,25Kw Compressed air: 6 bar Drinking water: 3 bar aprox. 1250 ltr/hr Features: Controll cabinet vacuümpump mix-tank water preparation Storage tank with pump valves etc as-is or tested and adjusted to customer choice

Condition: excellent (used), Year of construction: 2015, WEINIG ISEL 3020 XYZ CNC TEMPLATE MAKER TOOL FOR PROFILE GRINDER TECHNICAL DATA: CNC ROUTER WITH 3 AXIS MOVEMENT CLAMPING T SLOT TABLE CADCAM TEMPLATE MAKING SOFTWARE INCLUDED PC, SCREEN AND KEYBOARD INCLUDED FULLY ENCLOSED WORKING AREA WITH LOCKING DOOR SYSTEM LARGE CAPACITY WORKING AREA LOW VOLTAGE INTERNAL LIGHTING SET OF MOTOR COLLETS AND SPANNER SET TRAVEL AREA 300 x 200 MM Z AXIZ TRAVEL 90 MM SPINDLE SPEED 11000 & 25000 RPM Bjdpfx Aoyxxnwscvelf DIMENSIONS 650 MM (L) x 610 MM (W) x 715 MM (H)