Used Grinding Mill for sale (13,372)

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 27578701, turning length: 1,050 mm, turning diameter: 520 mm, spindle bore: 77 mm, rotational speed (max.): 5,000 rpm, controller model: Siemens Sinumerik, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter: 520 mm Max. turning diameter over cross slide: 440 mm Spindle bore: 77 mm Max. spindle speed: 5,000 rpm Drive power: 22 / 15 kW Torque: 672 / 168 Nm Tool interface: HSK 50 Hnsdpfx Afsyfphgonoh Tool stations: 96 TURRET Tool interface: VDI 40 Tool stations: 12 + 12 Driven tools: 12 MACHINE DETAILS Control: Siemens Sinumerik EQUIPMENT Chip conveyor Coolant system Filter system B-axis Swiveling counter spindle

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 259-45, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840 D, spindle speed (max.): 12,000 rpm, The following automation is also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Tool holder: HSK 63 Spindle speed: 12,000 rpm Number of tool positions: 65 MACHINE DETAILS Control: Siemens 840 D Spindle hours: approx. 16,000 h EQUIPMENT Knoll chip conveyor Knoll paper belt filter Blum LaserControl laser measuring system Renishaw digital 3D touch probe Automation interface Automatic door Oil mist extraction Internal coolant supply Hjdpfoyfum Ujx Afnjnh

Condition: ready for operation (used), Year of construction: 2019, operating hours: 7,774 h, functionality: fully functional, turning length: 452 mm, turning diameter: 300 mm, spindle speed (max.): 4,500 rpm, swing diameter over bed slide: 700 mm, TECHNICAL DETAILS Turning diameter: 230/300 mm Turning length: 452 mm Maximum swing over bed: 700 mm Spindle bore: 65 mm Spindle speed: 4,500 rpm Spindle motor: 15/11 kW Max. spindle torque: 179 Nm Number of tools in turret: 12 BMT 55 Live stations: 12 BMT 55 Hnjdpfx Aoyfnc Nsfnjh Live tool speed: 5,000 rpm Milling spindle drive: 5.6/3.7 kW Y-axis: ±60 mm Sub-spindle power: 7.4/4.9 kW Sub-spindle speed: 6,000 rpm Rapid traverse: 36/36/10 m/min MACHINE DETAILS Control: Fanuc Dimensions (L x W x H): 3.9 x 1.65 x 2.0 m Machine weight: approx. 4,700 kg Main spindle chuck diameter: 210 mm Sub-spindle chuck diameter: 125 mm EQUIPMENT Automatic tool measurement Q-Setter Chip conveyor Parts catcher with box 2 live tools BMT 55 Set of standard tools CNC turning center with live tooling, Y-axis, and sub-spindle.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840D solution line, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 630 mm Travel Z-axis: 550 mm Rapid traverse speed: 60 m/min Spindle speed: 12,000 rpm Clamping area: 3,600 x 710 mm T-slots: 5 Number of axes: 3 Tool magazine: 40 positions Traverse path in pendulum mode per work area: 1,250 mm MACHINE DETAILS Control: Siemens 840D solution line Machine weight: 9,600 kg EQUIPMENT 24-position tool magazine Coolant system 900 l High-pressure system 30 bar Internal coolant supply tools Chip conveyor Hydraulic unit 200 bar 6 hydraulic connections for 200 bar Hnedpfxoyfgf Nj Afneh 2 connector couplings A+B (3 per table side) Variable Chiron clamping logic Prosin Plus tool breakage monitoring for diameters > 3 mm Automatically opening and closing loading door Machine preparation for 1 x NC axis

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 5220511, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,000 rpm, workpiece weight (max.): 8,000 kg, TECHNICAL DETAILS Travel X-axis: 2,600 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Max. workpiece weight: 8,000 kg Table size: 3,600 x 900 mm Number of T-slots: 6 T-slot width: 22 mm T-slot spacing: 125 mm Spindle taper: ISO 50 DIN 69871 Spindle speed: 4,000 rpm (2 ranges: 0 - 1,000 rpm) Feed rate: 10 - 5,000 mm/min Rapid traverse: 10,000 / 10,000 / 10,000 mm/min Hnjdpfx Asygxgzefnsh MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions & Weight Space requirement: approx. 9.82 x 5.1 x 3.16 m Machine weight: approx. 21.5 t Motor Spindle drive motor: 29 kW Feed drive motor (Y-axis): 20 Nm Feed drive motor (X and Z-axis): 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW EQUIPMENT Tool changer Both head joints have 2.5°

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 460045, spindle speed (max.): 5,000 rpm, overall weight: 7,500 kg, controller model: SIEMENS SINUMERIK 840D, Equipment: chip conveyor, TECHNICAL DETAILS Turret Number of spindles: 2 Number of turrets: 3 Number of positions turret 1: 10 Number of positions turret 2: 10 Tool holder: VDI 25 Lower turret head Number of positions: 10 Rotational speed: 6,000 rpm Power of driven tools: 8 kW Hnodpfxeyhn Nzs Afneh Main spindle C-axis (resolution): 0.001° Max. spindle speed: 5,000 rpm Spindle power: 27 kW MACHINE DETAILS Control: SIEMENS SINUMERIK 840D Connection: 50 Hz 3x 400 V Total power requirement: 43 kW Dimensions & Weight Dimensions (L x W x H): 3,200 x 2,100 x 2,100 mm Machine weight: 7,500 kg EQUIPMENT Chip conveyor Foot pedal

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 0244, center height: 175 mm, grinding length: 1,000 mm, center width: 1,000 mm, grinding diameter: 348 mm, controller model: GE FANUC Series 18-T, TECHNICAL DETAILS Centre Height: 175 mm Centre Distance: 1,000 mm Max. Grinding Diameter: 348 mm Grinding Length: 1,000 mm Max. Workpiece Weight Between Centres: 250 kg Grinding Wheel Diameter: 500 mm Grinding Wheel Width: 100 mm Grinding Wheel Peripheral Speed: 45 m/s Longitudinal Slide Travel: 1,400 mm Longitudinal Slide Feed Rate: 8,000 mm/min Cross Slide Travel: 340 mm Cross Slide Swivel Range: +9/-9° Cross Slide Feed Rate: 8,000 mm/min Workpiece Spindle Head Max. Speed: 1,000 rpm Swivel Range: +30/-45° Tailstock Quill Taper: 4 MT Tailstock Quill Travel: 50 mm Connection: 50 Hz, 3x 400 Volt Grinding Spindle Motor: 15 kW MACHINE DETAILS Control: GE FANUC Series 18-T Connection: 50 Hz, 3x 400 Volt Grinding Spindle Motor: 15 kW Total Power Requirement: 27 kW Apparent Power Requirement: 16 kVA Dimensions & Weight Hnedpfxsyhn Eps Afneh Dimensions (L x W x H): 4,410 x 3,550 x 1,900 mm Machine Weight: approx. 5,100 kg EQUIPMENT Plunge Grinding MARPOSS Measuring Head Set of Grinding Wheels

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 7791, overall weight: 5,000 kg, workpiece height (max.): 25 mm, workpiece diameter (max.): 60 mm, TECHNICAL DETAILS Workpiece diameter: 5 - 60 mm Max. workpiece height: 1 - 25 mm Number of grinding heads: 2 Configuration: Double-sided (top, bottom) Grinding wheel outside diameter: 457 mm Grinding wheel speed: 24 m/s MACHINE DETAILS Voltage: 380 V Grinding motor power: 2 x 15 kW Hodpfx Afeyhn Dlsnenh Dimensions & weight Dimensions (L x W x H): 4,000 x 3,000 x 2,700 mm Machine weight: approx. 5,000 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 04374, grinding length: 1,000 mm, grinding width: 700 mm, grinding wheel diameter: 406 mm, table load: 1,000 kg, controller model: SIEMENS SINUMERIK 840 D, TECHNICAL DETAILS Grinding length: 1,000 mm Grinding width: 700 mm Travel X-axis: 1,120 mm Travel Y-axis: 690 mm Travel Z-axis: 635 mm Maximum workpiece weight on table: 1,000 kg Table length: 1,200 mm Table width: 500 mm Maximum grinding height above table: 650 mm Hodpoyhnv Uefx Afnsnh Grinding wheel diameter: 406 mm Grinding wheel width: 100 mm Grinding wheel bore: 152 mm Grinding wheel speed (fixed): 1,400 rpm Maximum table speed: 40 m/min Max. automatic cross-feed (infinitely variable): 2 m/min Max. automatic vertical feed: 2 m/min MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Connection: 50 Hz 3x 400 Volt Grinding spindle motor: 11 kW Total power requirement: 31 kW Dimensions & Weight Dimensions (L x W x H): 4,750 x 3,485 x 2,680 mm Machine weight: approx. 7,800 kg EQUIPMENT Coolant system Paper filter unit Electro-magnetic chuck (1,000 x 500 mm) Set of grinding wheels Lamp

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 630005, center height: 305 mm, center width: 1,000 mm, travel distance X-axis: 350 mm, travel distance Z-axis: 1,160 mm, controller model: KELCO 90, TECHNICAL DETAILS Centre height: 225 mm / 305 mm Centre distance: 1,000 mm Travel Z-axis: 1,160 mm Travel X-axis: 350 mm Max. workpiece weight: 200 kg Workpiece diameter: 449 mm Left grinding wheel diameter: 500 mm Left grinding wheel width: 80 mm Left grinding wheel bore: 203 mm Right grinding wheel diameter: 400 mm Right grinding wheel width: 40 mm Right grinding wheel bore: 127 mm B-axis swiveling range: +30° / -190° Max. grinding wheel speed: 1,720 rpm Peripheral speed: 45 m/s Workpiece spindle speeds from: 5 rpm Workpiece spindle speeds up to: 500 rpm Spindle taper: Morse taper 5 (MT 5) Tailstock quill taper: 4 Morse (MT 4) Tailstock quill stroke: 50 mm Feed rate X-axis: 8 m/min Feed rate Z-axis: 16 m/min Max. table tilt: -1° / +11° MACHINE DETAILS Control: KELCO 90 Total power requirement: 25 kW Connection: 50 Hz, 3x 380 Volt Dimensions & Weight Machine dimensions (L x W x H): 2,850 x 2,200 x 2,100 mm Control cabinet dimensions (L x W x H): 550 x 450 x 900 mm Machine weight: approx. 6,000 kg EQUIPMENT 80 mm riser block Coolant system Automatic tool measurement KELSET Wheel dressing device Hnodpfxoyhnrvs Afneh Internal grinding device (without spindle) Set of flanges Set of grinding wheels Balancing arbor Lamp Magnetic chuck diameter (2x): 300 mm / 500 mm Electronic hand-held control panel

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 370483, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, controller model: HEIDENHAIN TNC 124, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Table length: 800 mm Table width: 425 mm Max. workpiece weight on table: 250 kg Distance between vertical spindle and table: 560 mm Spindle taper: SK 40 Max. spindle speed: 5,000 rpm Swiveling range vertical milling head: ± 90° Feed rates: up to 2,000 mm/min Rapid traverse X-axis: 10 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Vertical quill stroke: 60 mm MACHINE DETAILS Control: HEIDENHAIN TNC 124 Connection: 50 Hz 3x 400 Volt Milling spindle motor: 5.5 / 7 kW Total power consumption: 15 kVA Dimensions & Weight Machine weight: approx. 1,800 kg Dimensions (L x W x H): 2,100 x 1,800 x 2,050 mm EQUIPMENT Rigid angle table Hodpjyhnmtofx Afnsnh Electronic handwheel Heidenhain probe Vertical milling head Full splash guard cabin Coolant system Machine lamp

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 318 BG 75, grinding length: 800 mm, grinding width: 300 mm, grinding wheel diameter: 250 mm, controller model: CNC QUICK (SIEMENS 805, PLC), number of axes: 2, TECHNICAL DETAILS Grinding length: 800 mm Maximum grinding width: 300 mm Grinding wheel diameter: 250 mm Axes: 2 Table length: 800 mm Table width: 300 mm Maximum distance between table and spindle center: 600 mm Maximum width: 70 mm Width: 50 mm Bore: 51 mm Hedpfxsyhnlps Afnsnh Table speed: from 2 m/min to 35 m/min Creep feed: from 2 m/min to 1,000 m/min Automatic cross feed: from 1 mm/min to 10,000 mm/min Automatic vertical feed up to: 10,000 mm/min MACHINE DETAILS Control: CNC QUICK (SIEMENS 805, PLC) Connection: 50 Hz 3x 400 V Grinding spindle motor: 6.6 kW Total power requirement: 22 kVA Machine weight: 4,500 kg EQUIPMENT Coolant system Paper filter unit Coolant/fume extraction unit Coolant temperature stabilization Electro-magnetic chuck length: 800 mm Electro-magnetic chuck width: 300 mm Dressing unit TAG Profile dressing unit TAD Electronic balancing device Lamp Complete splash guard cabin RS 232-C, V 24 interface

Condition: good (used), Year of construction: 2010, Maximum turning diameter 406mm, Maximum turning length 520mm, bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, Hodpfxoyizlle Afnonh C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, magazine barfeed

Condition: good (used), center height: 215 mm, grinding length: 1,500 mm, total width: 2,300 mm, total length: 5,530 mm, total height: 2,100 mm, grinding diameter: 430 mm, Matrix Okuma Universal Cylindrical Grinder Model: GU – 40 Max Dia Ground: 430mm Max Between Centres: 1500mm Wheel Size: 355 x 50 x 127mm Headstock Speed: 10-150 RPM Variable Table Swivels: 8 Degree Machine With: Coolant Filtration Tank Steadies Internal Grinding Attachment with Quill Hedpfx Aoyglhfefnjnh Dimensions: 5530 x 2300 x 2100mm High Weight: 6200 Kgs

Condition: good (used), center height: 200 mm, grinding length: 1,600 mm, grinding wheel diameter: 450 mm, grinding diameter: 400 mm, Mostana Horizontal Spindle Grinder Model: 3L722B-80 Capacity: 1600 x 400 x 400mm Long Travel: 1780mm Cross Travel: 430mm VerticalTravel: 415mm Hsdpfxeyglc Ae Afnonh Grinding Wheel: 450 x 80 x 203mm Spindle Motor: 11 KW Machine With: Rapid Traverse Vertical Incremental Downfeed Magnetic Chuck: 1575 x 400mm Coolant Clarifier Digital Readout Dimensions: 5940 x 2660 x 2600mm High Weight: 8000 KGS

Condition: excellent (used), feed length X-axis: 700 mm, feed length Y-axis: 350 mm, feed length Z-axis: 475 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, quill stroke: 100 mm, table length: 1,360 mm, table width: 300 mm, Cincinnati 2MK Horizontal Mill with Universal Vertical Head Model: 2MK Table Atea: 1360 x 300mm (53.5” x 11.8”) Longitudinal Travel: 700mm Cross Travel: 350mm Vertical Travel: 475mm Hnsdjygk Drepfx Afneh Spindle Taper: 50 INT Spindle Speeds: 25 – 1500 RPM Machine with: Horizontal Arbor & Arbor Support Angular Double Swivel Head

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg Hnsdpfoyhdi Rox Afneh

Condition: good (used), Year of construction: 2013, XYZ SMX 4000 CNC Vertical Milling Machine With Proto Trak SMX Control Hnsdpoyim Aaofx Afneh Table Dimension 1,474 x 356mm (4 'T' Slots). Maximum Table Load 850kg. Axis Travel 'X'=1,016mm, 'Y'=596mm, 'Z'=520mm. Quill Ø116mm. Quill Travel 127mm. Spindle Nose to Table 620mm. Spindle Centre To Column Face 520mm. Speed Range 40-5,000rpm (5.5kW Motor). Spindle Taper ISO40. Power Drawbar. S/No. 11683 (2013). With Coolant System, Quantity Of Toolholders With Tooling, Collet Set, 3D Edge Finder, Clamps/Accessories, Machine Vice, Work Light & Table Guarding. Approx Dimensions L4,405 x W3,143 x H2,690mm. Weight 3,560kg.

Condition: good (used), Year of construction: 2000, MORI SEIKI SH-503/40 TWIN PALLET CNC HORIZONTAL MILLING MACHINE WITH MORI SEIKI MSX-502III CONTROL UKUK Pallet Dimension 500 x 500mm. Maximum Table Load 1,000kg. Axis Travel X'=630mm, 'Y'=600mm, 'Z'=650mm, 'B'=1° Increment. Rapid Traverse 'X,Y,Z'=32m/min. Spindle Taper BT40. Maximum Spindle Speed 12,000rpm (22kW Motor). 120 Position ATC. Maximum Tool Ø150mm (Without Adjacent Tools), Maximum Length 360mm, Maximum Tool Weight 12kg. S/No. 1212 (2000). DESCRIPTION With Renishaw OMP 600 Spindle Probe, Blum Laser Tool Setting/Breakage Unit, Dual Auger To FSE Chip Conveyor, Through Coolant Filtration System, Oil Chiller, Filtermist Mist Extraction Unit, Handwheel & Signal Tower. Overall Dimensions L4,500 x W2,725 x H3,267mm. Weight 14,900kg. Note: Tooling & Tombstones Not Included. Hodpfx Aoxqt Tiofnonh

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, REFORM AR 101/61 Blade grinding machine available immediately. Please contact us for more information. Hnsdpfxoygvlus Afnjh

Condition: used, Used Fryma model MS-12 stainless steel coball annular gap bead mill. Grinding chamber volume approximately 0.5 litre capacity with throughput capacity of 5-40 litre per hour (depening on product). Internal ratwed 2.5 bar design pressure. Has external stainless steel jacket rated 2 bar design pressure. Unit driven by 3.37kw electical motor. Unit includes pump. Hnsdoygvmxspfx Afneh

Year of construction: 2006, condition: used, functionality: unexamined, Thibaut T108L Stone Milling & Polishing Machine with 1,260 x 3,000mm Polished Stone Bed & Accessories Head Seperated Hnsdpoyb Tfnsfx Afnsh

Condition: good (used), Mazak Integrex E-410H Multi-Tasking Lathe Hnedpfx Ajvgzuwjfnoh Mazatrol 640M Pro Control, 610mm Turning Dia Serial No. 164385 (2003)

Condition: excellent (used), Year of construction: 2009, Description The machine was used exclusively for plastics! Excellent condition TECHNICAL DETAILS X-axis travel: 260 mm Y-axis travel: 100 mm (+/- 50 mm) Z-axis travel: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Some axial and radial milling holders Tool turret: 16-position all driven Bar capacity: 65 mm Axis: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher Driven tools Hodoycu Rujpfx Afnjnh Tailstock Tool setting probe Dust extraction

Condition: excellent (used), Year of construction: 2020, Distance between spinles 800mm, Hedpfxew Nwfbj Afnonh Y axis (+/-105mm), C axis 0.001 degrees, B axis -30/+210 degrees, main spindle speed 5,000rpm, sub spindle speeds 6,000 rpm, milling speed 12,000rpm, bar capacity 65mm, 38 station ATC, spindle power 22/18.5 kw, Siemens 840D control, tool setter, through spindle coolant, magazine barfeed, robot loader,