Used Grinding Machine For Chisel for sale (84,135)

Condition: used, Year of construction: 2001, grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control Siemens 840D passage width 1300 mm electro-magnetic table 4200 x 1300 mm grinding height 550 mm grinding motor 306 kW grinding motor turning speeds up to 370 U/min Njdpfx Aajthumuo Eedf grinding motor feed, infinitely variable 0,5-35 m/min coolant flow rate 2000 l/min weight of the machine ca. 50 t dimensions of the machine ca. 11,21 x 5,25 x 3,85 m Equipment / Accessories: - segment head - diameter 1400 mm - for segment dimensions 120/106 x 41 x 250 mm - number of segments: 1 set = 26 pieces - grinding motor adjustment - in steps: 0,002 - 1 mm - continuous: up to 5 mm/min stepless

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.35 kW Nedpfx Aaob A Id He Ejdf -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts

Condition: used, Year of construction: 2003, grinding length 1.000 mm grinding width 700 mm workpiece height 500 mm table-size 1.000 x 500 mm max. table load 1.000 kg Ndjdpjx Ny Akefx Aa Eef magnetic clamping plate 1.000 x 500 mm table travel longitudinal 1.300 mm table travel cross 600 mm table feed 2 - 35 m/min turning speed range - grinding wheel 1.450 U/min grinding wheel size Ø 400 x 60 x 127 mm drive capacity - spindle motor 11,0 kW dressing device Tischabrichter voltage 400 V total power requirement 35 kVA weight of the machine ca. 6,3 t dimensions of the machine ca. 3,80 x 2,00 x 2,35 m band filter unit 1,80 x 0,60 x 2,35 m hydraulic power unit 0,85 x 0,65 x 1,15 m - Serial-No.: 209040 - Control: SIEMENS SIMATIC OP27 - Electronic handwheel - Dressing device on machine table - Paper band filter system

Condition: new, Year of construction: 2022, width of the strips 75 mm band length 2000 mm band speed 36 m/min total power requirement 4 kW Nodpfxjx H Alio Aa Eedf weight of the machine ca. 82 kg dimensions of the machine ca. 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tiltable sanding unit - Fold-away protective screen

Condition: used, OKAMOTO ACC 52 DX SURFACE GRINDING MACHINE MAKE OKAMOTO, MADE IN SINGAPORE Ndjdpfxew Elu Rj Aa Eef MODEL ACC 52 DX CONTROL AUTOMATIC TABLE SIZE 200 x 600 mm MAGNETIC CHUCK 200.0 x 500.0 mm ELECTRO MAGNETIC GRINDING WHEEL SIZE 205.0 x 19.0 x 50.0 mm TRAVERSES X AXIS: 650.0 mm Z AXIS: 230.0 mm DISTANCE GRINDING WHEEL TABLE 47.5 – 397.0 mm TOTAL POWER REQIUREMENT 2.25 kW MACHINE DIMENSIONS 2600 x 1600 x 1800 mm MACHINE WEIGHT 2,100 kgs PLUS DIAFORM WHEEL PROFILLING ATTACHMENT FAGOR DIGITAL READOUT VERTICAL HEIGHT READ OUT DISPLAY CROSS TRAVEL READ OUT DISPLAY AUTOMATIC DOWN FEED HYDRAULIC MOVEMENT COOLANT SYSTEM 200.0 x 500.0 mm FINE LOOP ELECTRO MAGNETIC CHUCK PAPER FILTRATION SYSTEM

Condition: used, Year of construction: 1994, max. wheel diameter 1.800 mm gear width 000 mm Njdpfxjv Santo Aa Eodf control Sinumerik 840 C profile depth 80 mm grinding wheel diameter 400 mm grinding wheel width 80 diameter of spindle pin 140 mm length of spindle pin 45 mm radial slide travel 1.000 mm tangential adjustment 300 mm axial slide travel 1.000 mm table diameter 1.200 mm table hole 300 mm feed speeds X: 3.000 mm/min feed speeds Y : 5.000 mm/min feed speeds Z: 6.000 mm/min total power requirement 80 kW weight of the machine ca. 15 t dimensions of the machine ca. 7,7 x 6,9 x 3,9 m electrics - voltage/frequency 400 / 50 V/Hz centering device

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: Njdpfxew Ed S Uo Aa Esdf - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 3 kW -Grinding discs: Ø 400 mm Ndodjb A If Tepfx Aa Eef -Operating voltage: 380 volts -Weight: 200 kg

Condition: excellent (used), Drill Bit Grinder Farman FC-80N (4-80mm) Grinding capacity: Ø 4 - 80 mm Angle adjustment: 40 - 180º Grinding wheel speed: 2,880 rpm Grinding wheel: Ø 180 mm Machine weight: 400 kg Machine dimensions (LxWxH): 800 x 1,000 x 1,300 mm Scope of supply: Ndsdpfox Nkatsx Aa Esf - Documentation - 20x spare grinding wheels

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW weight 75.0 kg including machine base Furnishing: - Powerful belt sander Ndjdpfxsxabaij Aa Eef - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration

Condition: used, Year of construction: 2005, Multifunction centre for machining glass, INTERMAC Type Master 23, year 2005 (1700 operating hours) Njdsx Iuhrspfx Aa Ejdf

Condition: not inspected (used), Year of construction: 1988, grinding length: 1,500 mm, grinding width: 900 mm, total height: 550 mm, dimensions: 1500x900x550 mm magnetic table: 1500x900 mm automatic weight: 6500 kg Ndodpfx Ajx Ikl Toa Eof

Condition: used, Year of construction: 2008, tip circle diameter 650/800 mm workpiece length - max. 1100 mm max. module 20 (25) mm min. module 0,5 mm control Siemens Sinumerik 840 D total connected load 62 kVA helical angle -45 / + 120 ° weight of the machine ca. 10 t Nodpsw Rrbysfx Aa Esdf

Condition: good (used), Year of construction: 1975, Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW Ndjdpfx Aasb A I T Ie Eef -Speed: 1745 rpm -Grinding discs: max. Ø 315 mm -Operating voltage: 380 volts -Weight: 230 kg

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 1730 mm Measurements depth 4000 mm Nsdpfx Aaox Nr Swj Ejdf Measurements height 1930 mm Machine weight 3500 kg Additional Equipment Accessories include a balancing device and diamond grinding wheel. Further technical specifications are available in the PDF. This Chevalier FSG 1640 AD III was manufactured in 2015. It features a grinding length of 1000 mm, height of 370 mm, and a magnetic plate size of 1000 x 400 mm. The grinding wheel measures 355 x 30 x 127 mm with a speed of 1750 rpm. Weighing approximately 3500 kg, its dimensions are 4000 x 1730 x 1930 mm. Contact us for more information about this machine. Application Types Grinding

Condition: new, width of the strips 150 mm band length 2280 mm revolutions per minute 2880 U/min roll diameter 140 / 80 mm table-size 700 x 350 mm engine output 3.0 kW weight 250 kg range L-W-H 1300 x 800 x 1500 mm MADE IN GERMANY - Machinevideo - ?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder Ndjdpfxjxab R Ie Aa Ejf - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Condition: excellent (used), Year of construction: 1980, Grinding length: 600 mm Grinding width: 200 mm Clamping area of table: 600 x 200 mm Maximum distance between table and grinding spindle center: 500 mm Ndsdpfex Ir I Aox Aa Eef Grinding wheel dimensions: 250 x 25 x 51 mm Table longitudinal feed hydraulically steplessly adjustable: 1 - 24 m/min Table cross feed per handwheel revolution: 4 mm Grinding spindle speed steplessly adjustable via DC drive: 800 - 4200 rpm DC drive: 1.5 - 5.0 kW Net weight with control cabinet approx.: 2000 kg Space requirement approx.: 3100 x 1700 x 1900 mm

Condition: not inspected (used), Year of construction: 1982, grinding length: 400 mm, grinding width: 150 mm, Diaform dresser visue travel 450 x 157 mm rapid rise and fall Nedpfox H Sdbox Aa Eodf

Condition: used, Year of construction: 2006, grinding diameter - cylindrical max. 650 mm grinding diameter - internal max. 600 mm control Siemens Sinumerik 840 D internal grinding depth max. 600 mm Nsdpfx Aasw Rf Tvj Ejdf External grinding length max. 600 mm workpiece length - max. 380 mm turning speed range - stepless 1-795 U/min Workpiece spindle unit (U/B1/L adjustment): -Travel (U axis) 300 mm -Swivel angle (B1 axis) -1°/+12° -Speed range (infinitely variable) 1-795 rpm -Setup speed (tapping) 10 rpm -Spindle head size A 8 according to DIN 55026 -Through bore 58.5 mm -Workpiece diameter max. 830 mm -Workpiece length max. 600 mm -Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): -Travel (Z1 axis) 800 mm -Travel (X1 axis) 150 mm -Swivel angle (B2 axis) 270° -Drive power of internal grinding spindles (infinitely variable) 7.5 kW -Grinding block mounting bore (diameter) 100 mm -Grinding block mounting length (diameter) 100 mm -Grinding diameter max. 600 mm -Grinding depth max. 860 mm -Manual longitudinal adjustment of internal grinding axis on table 530 mm External and surface grinding device (Z2/X2): -Travel (Z2 axis) 800 mm -Travel (X2 axis) 470 mm -Drive power of external grinding spindles 5.5 kW -Mounting bore grinding block Ø 120 mm -Grinding diameter max. 650 mm -Grinding length max. 600 mm -Grinding wheel diameter max. 500 mm Equipment/accessories: -Various grinding spindles -Various flanges/grinding wheel holders -Various clamping jaws -Coolant system -Oil mist filter -Cooler -Technical documentation

Condition: good (used), Grinding machine, angle grinder, lathe tool grinding machine, thread drill grinding machine, milling cutter grinding machine Ndsdpeb A Nihsfx Aa Ejf -Angle adjustment -grinding device -Disc: Ø 190 mm -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 700/700/H1400 mm -Weight: 275 kg

Condition: used, Year of construction: 2006, grinding diameter 250 mm grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec max. workpiece weight between centres 80 kg voltage 400V AC 50 Hz control voltage 24V AC/DC current -Sicherung für Zuleitung 35 A weight of the machine ca. 3,8 t Ndsdox I Sigspfx Aa Eof

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Ndodpfx Aovr Hgvsa Eof Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: good (used), Surface grinding machine, grinding machine -hydraulic horizontal surface grinding machine -Magnetic plate: 300 x 150 mm Ndodpfx Aaed A Idxe Eof -Grinding wheel motor: 1.1 kW 2800 rpm -Water cooling with: filter -Grinding disc diameter: 200 mm -Transport dimensions: 1470/1170/H1920 mm -Weight: 1090 kg

Condition: used, Year of construction: 2007, grinding range 600 x 450 mm magnetic plate size 600 x 400 mm grinding wheel size 300 x 50 x 76,2 mm total power requirement 11 kW weight of the machine ca. 2,1 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. Ndsdpfex I Siaex Aa Ejf subject to prior sale

Condition: used, Year of construction: 2007, max. workpiece diameter 800 mm profile depth 100 mm control Siemens Sinumerik 840 D x-travel 650 mm y-travel 300 mm z-travel 1300 mm spindle turning speed - stepless 400 - 4000 U/min table turning speeds 0 - 10 U/min total power requirement 110 kVa dimensions of the machine ca. 9,48 x 6,13 x 5,00 m Ndedpfxsw Rrcks Aa Eof weight of the machine ca. 24,5 t Tool: - Largest grinding wheel diameter 450 mm - Largest grinding wheel width 160 mm Feed rates: - X-axis 1 to 3000 mm/min - Y-axis 1 to 5000 mm/min - Z-axis 1 to 6000 mm/min Equipment/accessories: - Counterholder - Grinding oil treatment system - Oil mist extraction - Measuring probe - Dresser - Technical documentation