Used Grinding Machine For Chisel for sale (84,149)

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 3 kW -Grinding discs: Ø 400 mm -Operating voltage: 380 volts -Weight: 200 kg Ledpfsb A If Tjx Aa Esta

Condition: used, Year of construction: 2003, grinding length 1.000 mm grinding width 700 mm workpiece height 500 mm table-size 1.000 x 500 mm max. table load 1.000 kg magnetic clamping plate 1.000 x 500 mm table travel longitudinal 1.300 mm table travel cross 600 mm table feed 2 - 35 m/min turning speed range - grinding wheel 1.450 U/min grinding wheel size Ø 400 x 60 x 127 mm drive capacity - spindle motor 11,0 kW dressing device Tischabrichter voltage 400 V total power requirement 35 kVA weight of the machine ca. 6,3 t dimensions of the machine ca. 3,80 x 2,00 x 2,35 m band filter unit 1,80 x 0,60 x 2,35 m Lsdpfx Aaox Ny Akj Eota hydraulic power unit 0,85 x 0,65 x 1,15 m - Serial-No.: 209040 - Control: SIEMENS SIMATIC OP27 - Electronic handwheel - Dressing device on machine table - Paper band filter system

Condition: new, Year of construction: 2022, width of the strips 75 mm band length 2000 mm band speed 36 m/min total power requirement 4 kW Ltjdpfx Aaex H Alio Eja weight of the machine ca. 82 kg dimensions of the machine ca. 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tiltable sanding unit - Fold-away protective screen

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm Ltsdpfxjw Ed S Uo Aa Esa - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Condition: used, OKAMOTO ACC 52 DX SURFACE GRINDING MACHINE MAKE OKAMOTO, MADE IN SINGAPORE MODEL ACC 52 DX CONTROL AUTOMATIC TABLE SIZE 200 x 600 mm Ltodew Elu Rspfx Aa Eoa MAGNETIC CHUCK 200.0 x 500.0 mm ELECTRO MAGNETIC GRINDING WHEEL SIZE 205.0 x 19.0 x 50.0 mm TRAVERSES X AXIS: 650.0 mm Z AXIS: 230.0 mm DISTANCE GRINDING WHEEL TABLE 47.5 – 397.0 mm TOTAL POWER REQIUREMENT 2.25 kW MACHINE DIMENSIONS 2600 x 1600 x 1800 mm MACHINE WEIGHT 2,100 kgs PLUS DIAFORM WHEEL PROFILLING ATTACHMENT FAGOR DIGITAL READOUT VERTICAL HEIGHT READ OUT DISPLAY CROSS TRAVEL READ OUT DISPLAY AUTOMATIC DOWN FEED HYDRAULIC MOVEMENT COOLANT SYSTEM 200.0 x 500.0 mm FINE LOOP ELECTRO MAGNETIC CHUCK PAPER FILTRATION SYSTEM

Condition: used, Year of construction: 1994, max. wheel diameter 1.800 mm gear width 000 mm Ltedpfx Aasv Santj Eoa control Sinumerik 840 C profile depth 80 mm grinding wheel diameter 400 mm grinding wheel width 80 diameter of spindle pin 140 mm length of spindle pin 45 mm radial slide travel 1.000 mm tangential adjustment 300 mm axial slide travel 1.000 mm table diameter 1.200 mm table hole 300 mm feed speeds X: 3.000 mm/min feed speeds Y : 5.000 mm/min feed speeds Z: 6.000 mm/min total power requirement 80 kW weight of the machine ca. 15 t dimensions of the machine ca. 7,7 x 6,9 x 3,9 m electrics - voltage/frequency 400 / 50 V/Hz centering device

Condition: good (used), Year of construction: 1975, Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW Ledob A I T Ijpfx Aa Esta -Speed: 1745 rpm -Grinding discs: max. Ø 315 mm -Operating voltage: 380 volts -Weight: 230 kg

Condition: excellent (used), Drill Bit Grinder Farman FC-80N (4-80mm) Grinding capacity: Ø 4 - 80 mm Angle adjustment: 40 - 180º Grinding wheel speed: 2,880 rpm Lsdpfxjx Nkato Aa Eota Grinding wheel: Ø 180 mm Machine weight: 400 kg Machine dimensions (LxWxH): 800 x 1,000 x 1,300 mm Scope of supply: - Documentation - 20x spare grinding wheels

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW weight 75.0 kg including machine base Ltedpoxabaiefx Aa Esa Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration

Condition: used, Year of construction: 2008, tip circle diameter 650/800 mm Lodpfew Rrbyjx Aa Eota workpiece length - max. 1100 mm max. module 20 (25) mm min. module 0,5 mm control Siemens Sinumerik 840 D total connected load 62 kVA helical angle -45 / + 120 ° weight of the machine ca. 10 t

Condition: used, Year of construction: 2005, Multifunction centre for machining glass, INTERMAC Type Master 23, year 2005 (1700 operating hours) Lsdpfx Ajx Iuhrsa Eeta

Condition: not inspected (used), Year of construction: 1988, grinding length: 1,500 mm, grinding width: 900 mm, total height: 550 mm, dimensions: 1500x900x550 mm magnetic table: 1500x900 mm automatic weight: 6500 kg Lsdox Ikl Tjpfx Aa Esta

Condition: good (used), Grinding machine, angle grinder, lathe tool grinding machine, thread drill grinding machine, milling cutter grinding machine -Angle adjustment -grinding device -Disc: Ø 190 mm -Drive: 0.2 kW Ltedpob A Nihjfx Aa Esa -Speed: 2800 rpm -Dimensions: 700/700/H1400 mm -Weight: 275 kg

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 1730 mm Measurements depth 4000 mm Measurements height 1930 mm Machine weight 3500 kg Ltedpfx Aex Nr Swoa Esa Additional Equipment Accessories include a balancing device and diamond grinding wheel. Further technical specifications are available in the PDF. This Chevalier FSG 1640 AD III was manufactured in 2015. It features a grinding length of 1000 mm, height of 370 mm, and a magnetic plate size of 1000 x 400 mm. The grinding wheel measures 355 x 30 x 127 mm with a speed of 1750 rpm. Weighing approximately 3500 kg, its dimensions are 4000 x 1730 x 1930 mm. Contact us for more information about this machine. Application Types Grinding

Condition: new, width of the strips 150 mm band length 2280 mm revolutions per minute 2880 U/min roll diameter 140 / 80 mm table-size 700 x 350 mm engine output 3.0 kW weight 250 kg range L-W-H 1300 x 800 x 1500 mm MADE IN GERMANY - Machinevideo - ?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table Ltedpfsxab R Ijx Aa Eoa - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Condition: used, Year of construction: 2006, grinding diameter - cylindrical max. 650 mm grinding diameter - internal max. 600 mm control Siemens Sinumerik 840 D internal grinding depth max. 600 mm External grinding length max. 600 mm workpiece length - max. 380 mm turning speed range - stepless 1-795 U/min Workpiece spindle unit (U/B1/L adjustment): -Travel (U axis) 300 mm -Swivel angle (B1 axis) -1°/+12° -Speed range (infinitely variable) 1-795 rpm -Setup speed (tapping) 10 rpm -Spindle head size A 8 according to DIN 55026 -Through bore 58.5 mm -Workpiece diameter max. 830 mm -Workpiece length max. 600 mm -Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): -Travel (Z1 axis) 800 mm -Travel (X1 axis) 150 mm -Swivel angle (B2 axis) 270° -Drive power of internal grinding spindles (infinitely variable) 7.5 kW -Grinding block mounting bore (diameter) 100 mm Ltsdpfx Aasw Rf Tvs Eja -Grinding block mounting length (diameter) 100 mm -Grinding diameter max. 600 mm -Grinding depth max. 860 mm -Manual longitudinal adjustment of internal grinding axis on table 530 mm External and surface grinding device (Z2/X2): -Travel (Z2 axis) 800 mm -Travel (X2 axis) 470 mm -Drive power of external grinding spindles 5.5 kW -Mounting bore grinding block Ø 120 mm -Grinding diameter max. 650 mm -Grinding length max. 600 mm -Grinding wheel diameter max. 500 mm Equipment/accessories: -Various grinding spindles -Various flanges/grinding wheel holders -Various clamping jaws -Coolant system -Oil mist filter -Cooler -Technical documentation

Condition: excellent (used), Year of construction: 1980, Grinding length: 600 mm Grinding width: 200 mm Clamping area of table: 600 x 200 mm Maximum distance between table and grinding spindle center: 500 mm Grinding wheel dimensions: 250 x 25 x 51 mm Ledjx Ir I Ajpfx Aa Eota Table longitudinal feed hydraulically steplessly adjustable: 1 - 24 m/min Table cross feed per handwheel revolution: 4 mm Grinding spindle speed steplessly adjustable via DC drive: 800 - 4200 rpm DC drive: 1.5 - 5.0 kW Net weight with control cabinet approx.: 2000 kg Space requirement approx.: 3100 x 1700 x 1900 mm

Condition: not inspected (used), Year of construction: 1982, grinding length: 400 mm, grinding width: 150 mm, Diaform dresser Ltsdpfjx H Sdbjx Aa Eja visue travel 450 x 157 mm rapid rise and fall

Condition: good (used), Surface grinding machine, grinding machine -hydraulic horizontal surface grinding machine Ltedpfx Asd A Idxja Esa -Magnetic plate: 300 x 150 mm -Grinding wheel motor: 1.1 kW 2800 rpm -Water cooling with: filter -Grinding disc diameter: 200 mm -Transport dimensions: 1470/1170/H1920 mm -Weight: 1090 kg

Condition: used, Year of construction: 2006, grinding diameter 250 mm grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec max. workpiece weight between centres 80 kg voltage 400V AC 50 Hz control voltage 24V AC/DC current -Sicherung für Zuleitung 35 A weight of the machine ca. 3,8 t Ljdpfjx I Sigex Aa Esta

Condition: excellent (used), Brand: ESTARTA Model: 312 Type: Centerless grinding machine Grinding Wheel dimensions: 508 x304,8 x 160 mm Ø min/max to grinding: 1,5 / 75 mm Regulating wheel width: 160 mm Regulating wheel dimensions : 304,8 x 190,5 x 160 mm Maximum length to rectify in plunge : 160 mm Maximum length to rectify in plunge : 160 mm Ljdex Iu E Depfx Aa Eota Grinding wheel head motor power : 11 kw Machine size : 2015 x 1280 x 1440 mm Weight : 3500 kgs

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW Lodpfjvr Hgvjx Aa Eota

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 1,810 mm, total length: 1,930 mm, total width: 1,800 mm, workpiece weight (max.): 20 kg, spindle speed (max.): 10,000 rpm, type of input current: three-phase, grinding wheel diameter: 203 mm, overall weight: 4,500 kg, travel distance X-axis: 384 mm, travel distance Y-axis: 317 mm, travel distance Z-axis: 217 mm, grinding spindle motor power: 12,000 W, input voltage: 400 V, spindle nose: HSK-40F, CNC Tool grinding machine ANCA FX 5 Linear TECHNICAL CHARACTERISTICS: Colour touch screen: 19 ["] Stroke X axis: 384 [mm] Resolution X axis: 0.0001 [mm] Stroke Y axis: 317 [mm] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 217 [mm] Resolution Z axis: 0.0001 [mm] Stroke A axis: 360 [°] Stroke C axis: 230 [°] Resolution C axis: 0.0001 [°] Max. grinding lenght: 200 [mm] Max. grinding diameter: 200 [mm] Grinding spindle attachment: HSK-40F Max. grinding wheel speed: 10000 [rpm] Grinding spindle motor power: 12 [kW] Max. diameter grinding wheel: 203 [mm] Max. part weight in part holder headstock: 20 [Kg] Supply voltage: 400 [V] Total power required: 16 [kVA] Machine dimensions: 1930 x 1800 x 1810 [mm] Weight: 4500 [Kg] EQUIPMENT INCLUDED: Ltjdpfjx Nqf Nsx Aa Eja x1 FANUC tool loading robot x1 set of glass scale rules on the X and Y axes x1 RENISHAW part probe More information upon request.

Condition: used, Year of construction: 2007, grinding range 600 x 450 mm magnetic plate size 600 x 400 mm grinding wheel size 300 x 50 x 76,2 mm total power requirement 11 kW weight of the machine ca. 2,1 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. Lodpfxox I Sias Aa Eeta subject to prior sale

Condition: used, Year of construction: 2007, max. workpiece diameter 800 mm profile depth 100 mm control Siemens Sinumerik 840 D x-travel 650 mm y-travel 300 mm z-travel 1300 mm spindle turning speed - stepless 400 - 4000 U/min table turning speeds 0 - 10 U/min total power requirement 110 kVa dimensions of the machine ca. 9,48 x 6,13 x 5,00 m weight of the machine ca. 24,5 t Tool: - Largest grinding wheel diameter 450 mm - Largest grinding wheel width 160 mm Feed rates: - X-axis 1 to 3000 mm/min - Y-axis 1 to 5000 mm/min - Z-axis 1 to 6000 mm/min Equipment/accessories: Ltedjw Rrckjpfx Aa Eea - Counterholder - Grinding oil treatment system - Oil mist extraction - Measuring probe - Dresser - Technical documentation