Used Grinding And Polishing Machine for sale (70,234)

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length 670 mm Max. grinding width 280 mm Max. grinding height 400 mm Table speed, longitudinal 2 – 35 m/min Table speed, transverse 0.3 – 40 mm/stroke Rapid traverse yes Grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions L x W x H 2000 x 1850 x 2000 mm Bdsdpfx Aksf Um Raeiei Machine weight 2300 kg Hydraulic and electrical system dimensions L x W x H 1200 x 800 x 2000 mm Hydraulic and electrical system weight 650 kg Accessories / Special features: • Permanent magnet clamping plate 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel • Machine alignment elements Note: o Hydraulic cylinder for table stroke newly sealed o New filters in the hydraulic unit o Handwheel adjustment for transverse stroke newly mounted Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1998, functionality: fully functional, Machine was overhauled in 2017! -Distance from the workpiece spindle head to the front edge of the internal grinding spindle carrier: max. 540mm Bedpfx Aez Rm Swekiedi -Longitudinal adjustment of the internal grinding unit on the table: max. 210mm -Feed rate: 0.0005mm -Grinding head mounting bore: Ø 80mm x L: 180mm Equipment: -Truing device with diamond insert Work performed: -Guides renewed -Grinding spindle overhauled -Machine completely disassembled and wear parts replaced -Repainted

Condition: used, Year of construction: 1986, grinding length 400 mm Bsdpfx Aj Aa A Hbokiodi grinding width 210 mm workpiece height 300 mm grinding wheel width x diameter 250 x 15 x 51 mm turning speeds 1100-2800 U/min forward and return motion adjustable 0-3 m/min 350 x 200 mm total power requirement 2,1 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2 x 1,5 x 1,8 m Surface grinding machine with: - Coolant system - Heidenhain digital readout

Condition: excellent (used), Double grinding wheel stand Rema / Schulmaschine Bjdpfjhaf Ndox Akiedi Wheel dimensions (in mm): 300/40/76 Power (in kW): 1.8 Speed (RPM): 1450 Voltage: 380 Volt Lamp Protective shields Location: Available from stock in 54634 Bitburg - immediately available -

Condition: good (used), Machine spindle, precision spindle, double bench grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: DKF, Grinding spindle Precision spindle -Type: 6.251/23 -Speed: max 12500 rpm -Cylinder: Ø 80 x 250 mm -Recession: Cone on both sides, see photos -Number: 4x spindles available -Price: per piece Bsdov Syp Dspfx Akijdi -Overall dimensions: Ø 80 x 350 mm -Weight: 8.8 kg/pc.

Condition: used, Year of construction: 1991, width of the strips 150 mm band length 2.000 mm Bedpfx Asy Ty A Ejkijdi motor 400 V loading area 450 x 160 mm total power requirement 4,0 kW dimensions of the machine ca. 1,10 x 0,70 x 1,15 m - Serial-No.: 200.184

Condition: good (used), Year of construction: 2000, functionality: fully functional, LA MACCHINA UTENSILE s.r.l. – FVA 20" PR 180° Automatic wheel brushing machine for processing and deburring aluminum rims. Technical data Manufacturer: LA MACCHINA UTENSILE s.r.l. (Italy) Model: FVA 20" PR 180° Serial number: 2100 Year of manufacture: 01/2003 Machine weight: 3,000 kg Mains voltage: 400 V Frequency: 50 Hz Connected power: 19 kW Rated current: 40 A Max. operating pressure: 50 bar CE marking: Yes Machine description Automatic brushing machine for the post-processing of aluminum rims Processing of rims up to 20 inches Two opposing brush units (top/bottom) Digital adjustment of: Brush speed (top) Brush speed (bottom) Brush current (top) Brush current (bottom) Automatic rotary table / workpiece positioning Pneumatic or hydraulic workpiece clamping PLC-controlled processing Application area The machine is used for: Removing burrs Bdjdpfx Aksw Rrwzeisi Cleaning wheel contours Brushing the spokes Surface finishing after casting or machining Preparation before painting or final inspection

Condition: good (used), Year of construction: 2006, 1 used surface grinding machine Manufacturer: PROTH Type: PSGS-3060 BH Bdedpjz S Ud Dsfx Akiei Serial No.: 0G02G-05 Year of manufacture: 2006 Technical data Grinding wheel diameter: approx. 400 mm Magnetic chuck: approx. 600 × 300 mm Control system: PROTH Hydraulic unit: included Equipment Magnetic chuck for clamping ferromagnetic workpieces Hydraulic unit PROTH control system

Condition: reconditioned (used), Year of construction: 1986, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1986 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 86-5751 with guarantee Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Bedpfx Akjqctnisiedi Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate Used as seen The machine is technically compliant with the state of the art at the time of manufacture.

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Bdodpfxsu Ng Nce Akiji Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 34.0 m/s total power requirement 3.0 kW weight of the machine ca. 75.0 kg dimensions of the machine ca. 570 x 570 x 1150 mm Description: - Excellent grinding performance thanks to high belt speed - Quick adjustment for horizontal and inclined positions - Continuous surface grinding area for optimal grinding of long workpieces - Versatile for grinding edges, surfaces, and for cylindrical grinding - Includes a quick-clamping system for fast belt changes - Easy adjustment of parallel belt alignment using an adjustment screw - Graphite coating on the flat grinding surface improves the sliding properties of the abrasive belt Scope of delivery: - Sanding belt - Hinged protective shield - Sanding and support table - Workpiece stop - Emergency stop button - Machine base Bdsdpfx Akjz Auicoioi - Operatorâ??s manual (ENG)

Condition: used, ABA MULTILINE 1507 A is a profile grinding machine engineered for precision, high accuracy and reliable operation. Capacities: table 2000x600 mm, grinding area 1500x600 mm, table load max 2500 kg, table‑to‑spindle centre 900 mm; travels X1500, Z750, Y900 mm. Specs: stepless feeds X 2000–35000, Z 5–5000, Y 1–3000 mm/min; wheel speeds 50–2500 t/min; wheel Ø400x60 mm, bore 127 mm; spindle motor 26 kW; supply 3x400V 50Hz; total power 35 kW; weight ≈11000 kg; size 6465x3770x3000 mm. Accessories: paper filtration, magnetic plate 1500x700 mm, lamp, switch‑cabinet air conditioner. Achieves tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace, medical. Bdjdpfx Aksyxn Iaeioi

Condition: excellent (used), Year of construction: 2003, Degen FS 2550 Surface Grinding Machine Degen FS 2550 surface grinding machine, manufactured in 2003, in SUPER condition with approximately 100 operating hours. CE compliant!! The machine comes from the Richard-Hartmann School (vocational school) in Chemnitz. Technical data: Year of manufacture: 2003 Clamping area / table size: 500 x 250 mm Max. grinding area: 500 x 250 mm Max. travel (X / Z): 600 x 280 mm Max. distance between spindle nose and table: 490 – 500 mm Max. workpiece weight: 320 kg Dimensions of magnetic clamping plate: 500 x 250 x 80 mm Bsdpfx Aoz Rla Hjkijdi Grinding spindle & feed Grinding wheel dimensions: 355 x 25 x 127 mm (standard) Spindle speed: 1,500 rpm (at 50 Hz) / 1,800 rpm Spindle motor: 2.2 kW (3 HP) Longitudinal feed (X-axis, hydraulic): continuously variable 1 – 25 m/min Transverse feed (Z-axis, automated): 0.1 – 10 mm/ About the machine: Offered is a Degen FS 2550 surface grinding machine, manufactured in 2003, in SUPER condition with approximately 100 operating hours. This universal surface grinding machine is in very good original condition. It comes from a vocational school where it was used only sparingly for training purposes. It has a very easy-to-use control system. A grinding travel of 500 mm in the longitudinal axis and a transverse travel of 250 mm make it suitable for toolmaking, fixture construction, and small-series production. Its extensive standard equipment and ease of operation are characteristic of this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Degen has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Degen on-site while it is powered up. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: used, Year of construction: 1966, machine/vehicle number: 12485, grinding diameter:350 mm grinding length:2500 mm centre height:180 mm total power requirement:5,5 kW weight of the machine ca.:5,5 t Bdjdpji E Ix Nefx Akisi

Condition: excellent (used), with internal grinding attachment Center height 125 mm Distance between centers 1000 mm Table size 1650 x 145 mm Grinding wheel 400 x 50 x 127 mm Grinding wheel speeds 1'500 - 2'200 rpm Grinding head turnable 270° Grinding wheel 225 x 20 x 76.2 mm Bodoy H Dq Hjpfx Akiodi Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 1981, Technical details: grinding diameter: 240 mm grinding length: 700 mm centre height: 125 mm Bodpou Ng Avjfx Akiodi table length: 1525 (schwenkbar) mm distance grinding spindle - table min./max.: 225/410 mm rpm speed range - grinding wheel: 1590 U/min grinding wheel dia. (unused wheel): 600 mm grinding wheel dia. (used wheel): 450 mm cutting speed: 50 m/s total power requirement: 13 kW weight of the machine ca.: 5,5 t space requirements of the machine approx.: L:2,8xB:2,2xH:1,8 m Cylindrical grinding machine, semi-automatic operation - grinding spindle head -adjustment 185mm - grinding spindle head-infeed 0,001-0,05 mm/min continuous - rotation workpiece 50-500 rpm continuous machine is equipped: - sleeve with hydr. retraction - cooling device - trueing device - grinding wheel balancing - transverse delivering device for grinding spindle head - hydr. adjustment of grinding table. Upper table swivable. Documentation i.D. *

Condition: used, Year of construction: 2012, grinding diameter 200 mm profile depth 30 mm workpiece length - max. 2790 mm grinding length 2310 mm Bedpfeza Hqzjx Akiedi Maximum pitch of the screw -/+ 50 ° Maximum number of gears 1-999 workpiece weight max. 250 kg z-travel 3000 mm x-travel 185 mm max. dia. of grinding wheel 450-330 mm Grinding wheel thickness (with recess) 20-70 mm roll diameter 120 mm Speed of the grinding wheel spindle 1500 - 6000 U/min Workpiece spindle speed 0 - 600 U/min Speed of the pitch axis 0-4 1/min Speed of the dressing spindle 1500-16000 1/min feed speed z-axis 0-10000 mm/min feed speed x-axis 0-10000 mm/min total power requirement 150 kVA control Siemens Sinumerik 840D SL weight of the machine ca. 30 t dimensions of the machine ca. 10,65 x 5,37 x 2,75 m Features/Accessories: - Filtration system: KNOLL VL1500/5000 - many accessories—list to follow - documentation

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm Bdsdpjwgnz Ajfx Akiji table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!

Condition: excellent (used), Steel grinding machine Manufacturer Klingel Type HSM with 4 stations 2 grinding wheels, diameter 200 mm 1 lapping wheel, diameter 100 mm 1 lapping wheel, diameter 150 mm with coolant system 380 Volt Space requirements: Length 1200 mm Bdsdpfjw Stmyex Akiei Width 1200 mm Height 1500 mm with pallet Weight 530 kg with pallet

Condition: used, Year of construction: 2001, functionality: fully functional, OKAMOTO ACC 64 DX Surface Grinding Machine Year: 2001 TBC Servo Automatic Downfeed 600 x 400.0mm WALKER HAGOU MAGNET Bdjdezv Ef Uepfx Akiji Electromagnetic chuck Paper coolant filtration system

Condition: excellent (used), Year of construction: 1993, grinding diameter max. 100 mm Bsdpfx Aez S Nymekiodi max. width of grinding wheel 230 mm

Condition: used, Year of construction: 2005, functionality: unexamined, Equipment: CE marking, Belt grinding machine Manufacturer: Falcioni Type: Profitech Plus 5 Bdedpfxjz Ritqe Akioi Year of manufacture: 2005 1 belt grinding unit, swiveling 4 brush grinding units, swiveling Conveyor belt width approx. 75 mm Dimensions approx. 5000 x 1700 x 2300 mm (L x W x H)

Condition: used, Year of construction: 1999, KBN 560 (Ecostar) HSS and segmented circular saw blade grinding machine (CNC controlled) Suitable for the automatic grinding, re-tooth cutting and beveling of HSS and segmented circular saw blades, as well as carbide-tipped circular saw blades, using the deep grinding process with CBN or diamond grinding wheels. Technical data: Working range: Diameter (20) 80 - 560 mm, tooth pitch 1 - 25 mm, number of teeth 2 - 998, saw blade thickness up to 8 mm; Grinding wheels: Grinding wheel diameter 200 mm, grinding wheel bore diameter 32 mm, connection value 5.5 kW (400 V / 50 Hz), weight approx. 980 kg, dimensions W x D x H = 1600 x 1750 x 1996 mm, color blue RAL 5014 / gray RAL 7035. Accessories: Full enclosure, wet grinding system, automatic central lubrication, program for beveling regularly toothed saw blades, Vario-Zahn software for the automatic grinding of different tooth pitches, measuring grinding program for grinding saws to the same outer diameter, special program for full carbide teeth, machine light. Optional accessories: Extraction system, grinding wheel flange, holder for small saws. Bdjdj Aba Rmopfx Akiji Condition: The machine is in good technical condition. Please refer to the attached photos and video for further details regarding the condition.

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding length: 500 mm, grinding width: 300 mm, feed length X-axis: 600 mm, feed length Y-axis: 475 mm, feed length Z-axis: 275 mm, table length: 500 mm, overall weight: 3,700 kg, - control SPS NK - electro magnet - coolant device - 3 grinding wheels, some flanges Bdjdpfxowrmcps Akisi Technische Daten / technical details: Schleiflänge / grinding length 500 mm Schleifbreite / grinding width 300 mm Schleifhöhe / grinding height 475 mm Elektromagnetabmessungen / electro magnet dimensions 500x300 mm Längsachse X / table travel X 600 mm Querachse Z / cross travel Z 270 mm Vertikalachse Y / vertical travel Y 475 mm Drehzahl Schleifscheibe / speed of grinding wheel 1440/2900 UpM / rpm Schleifscheibe / grinding wheel 300x50x76,2 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 5,7 kW Gewicht der Maschine ca. / weight ca. 3700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Type: JA 500 CNC-C Year of manufacture: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Maximum workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Bdodpfx Aewp E Rgokisi Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Rotational speed: 4,200 rpm Machine weight: approx. 2,500 kg 31126ä