Used Grav for sale (196)

Condition: refurbished (used), Chamber filter press 1200x1200 Application: gravel works / tunnel construction Number of filter plates: available in different designs and number of plates Filter pressure: 15 bar Filter cloths: optional in coordination with the medium Piston diaphragm pump: optional Available: pre-configured from stock or according to customer requirements Prsdpfsrq I Iwox Adzea Condition: refurbished - rebuilt also according to customer requirements

Condition: ready for operation (used), Year of construction: 2021, input voltage: 230 V, laser power: 30 W, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 30 W Voltage: 230 V Frequency: 50/60 Hz EQUIPMENT Rulers in mm Atmos Cube Rayjet 230 V Beige extraction connection cable 9po Cutting table MM and inches 8015 Psdpfxozaqk So Adzera Power cable 20A Wooden packaging Note: Accessories are sold as is, without warranty. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. Prjdpfx Aoph U Anjdzja The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) - digital modulation up to 20 kHz

Condition: good (used), Year of construction: 1986, SOE reamer grinding machine with projection measuring device. Accessories: collets, various grinding wheels. In good, operational condition. Predpfxey Tuhvs Adzea

Condition: good (used), Year of construction: 1977, functionality: fully functional, Deckel SOE tool grinder with accessories Technical data: >> Machine no. SOE 77-3997 Year built 1977 >> Motor speed 2800 rpm >> Grinding spindle speed 4500 rpm >> Motor power: 0.55 kW / 380 Volt Prsdpowrm Nvjfx Adzja >> Weight approx. 200 KG Accessories and equipment: >> Collets >> Grinding wheels >> Machine stand / base >> Dressing device >> Tools >> Grinding dust extraction About the machine: Offered is a Deckel SOE tool grinder with accessories. Mechanically and electrically tested. A beautiful and fully functional machine. Take the opportunity to view and try out this machine under power on site.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Prodpfxjxp Urws Adzoa Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH spiral sand washers are reliable systems that offer high efficiency in separating and cleaning fine materials that need to be washed. These machines are designed to effectively clean gravel, sand, or crushed stone containing large amounts of clay, dust, and dirt. Thanks to their heavy-duty steel construction, they provide long-lasting performance even under harsh working conditions. Their durable body, wear-resistant structure, and easily replaceable spare parts minimize maintenance costs. Constmach spiral washers are manufactured with high-quality materials and superior engineering design, ensuring trouble-free operation in both stationary and mobile facilities. They adapt to different production needs with single or double shaft configuration options. Furthermore, the specially designed gearbox and replaceable rubber boots enable long-term, quiet, and efficient operation. Its simple assembly structure makes installation easy and allows for quick commissioning. Screw Washer Technical Specifications Model: CSW-50 Dimensions: Φ 500 x 5,000 Motor Power: 4 kW Capacity: 25 – 45 m³/hour Rotation Speed: 24 rpm Water Requirement: 25 – 45 m³/hour Weight: 2,800 kg Model: CSW-60 Dimensions: Φ 600 x 6,000 Motor Power: 2 x 5.5 kW Capacity: 40 – 75 m³/hour Rotation Speed: 20 rpm Water Requirement: 35 – 55 m³/hour Predpfxoxp Urqe Adzsa Weight: 5,200 kg Model: CSW-75 Dimensions: Φ 750 x 7,500 Motor Power: 2 x 7.5 kW Capacity: 45 – 80 m³/hour Rotation Speed: 20 rpm Water Requirement: 40 – 60 m³/hour Weight: 5,800 kg Model: CSW-80 Dimensions: Φ 800 x 8,000 Motor Power: 2 x 11 kW Capacity: 50 – 90 m³/hour Rotation Speed: 20 rpm Water Requirement: 45 – 65 m³/hour Weight: 6,250 kg Why Choose a CONSTMACH Spiral Sand Washer? Constmach manufactures high-performance, low-maintenance, and durable machines with years of experience in the concrete and aggregate industry. Our helical sand washers combine quality with long-term usage assurance. Each of our European standard-manufactured equipment ensures energy savings with optimal efficiency. We also maximize user satisfaction with after-sales technical support and fast spare parts supply. For professionals seeking superior engineering, reliable performance, and long-lasting use, CONSTMACH spiral sand washers are the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2026, functionality: fully functional, CONSTMACH SW series mobile sand washing and screening plants deliver maximum performance in the field with high efficiency and flexible usage capabilities. Used for washing, screening, and classifying natural sand and gravel, these plants can be easily positioned even in confined spaces thanks to their compact design. Having all equipment assembled on a single mobile chassis significantly reduces setup time and makes transportation extremely practical. These plants, which can be quickly moved from site to site, provide businesses with significant savings in both time and money. SW-1240 Production Capacity: 60 t/h Screen Dimensions: 1,200 x 4,000 mm Helical Washer Dimensions: 400 x 4,000 mm Feed Height: 4,600 mm Total Motor Power: 37 kW Electric Generator Requirement: 75 kVA Weight: 20,000 kg Transport Dimensions: 15(L) x 2.8(W) x 4.2(H) m SW-1640 Pedpfx Adexqgy Nozera Production Capacity: 80 t/h Screen Dimensions: 1,600 x 4,000 mm Helical Washer Dimensions: 500 x 5,000 mm Feed Height: 4,650 mm Total Motor Power: 41 kW Electric Generator Requirement: 85 kVA Weight: 24,000 kg Transport Dimensions: 15.5(L) x 3.25(W) x 4.3(H) m SW-1850 Production Capacity: 150 t/h Screen Dimensions: 1,800 x 5,000 mm Helical Washer Dimensions: 600 x 6,000 mm Feed Height: 4,700 mm Total Motor Power: 50 kW Electric Generator Requirement: 100 kVA Weight: 32,000 kg Transport Dimensions: 16(L) x 3.65(W) x 4.4(H) m SW-2060 Production Capacity: 200 t/h Screen Dimensions: 2,000 x 6,000 mm Helical Washer Dimensions: 700 x 7,000 mm Feed Height: 4,750 mm Total Motor Power: 55 kW Electric Generator Requirement: 120 kVA Weight: 37,000 kg Transport Dimensions: 17(L) x 3.85(W) x 4.5(H) m Why Choose CONSTMACH Mobile Sand Washing and Screening Plant? CONSTMACH combines quality, durability, and user-friendly design in its mobile sand washing and screening plants. Manufactured to European standards, our machines exceed industry expectations with their high washing capacity and low maintenance costs. Every plant we produce, backed by years of engineering experience, aims to ensure uninterrupted efficiency in our customers' production processes. Offering portability, quick installation, and high performance, these plants give you maximum flexibility at every stage of your projects. Choose the CONSTMACH brand for quality production, technical support, and reliable service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: hybrid, color: other, Equipment: cabin, The fixed sand washing and screening plant is an advanced system designed for the high-efficiency separation and cleaning of natural sand and gravel. Developed with CONSTMACH engineering, these plants can be customized according to different production capacities, final product sizes, and washing requirements. Thanks to the plant's modular design, it can be easily integrated into any project area with different layout plans. It offers flawless washing performance with options such as a high-vibration feed bunker, a washing nozzle vibrating screen, and a helical or bucket washer. The hydrocyclone system ensures maximum efficiency in separating fine material. Furthermore, thanks to the PLC-controlled automation system, all processes are managed from a single point, minimizing the margin of error. CONSTMACH stationary sand washing and screening plants are equipped with SIEMENS and SCHNEIDER brand electronic components, offering long-term use and high durability. With these features, they are an ideal solution for companies that want to maintain high quality standards in aggregate production. Prodpfexqai Rox Adzea Stationary Washing and Screening Plant Technical Specifications Production Capacity: 100 – 250 t/h Maximum Feed Size: 200 mm Feed Height: 4.5 meters Main Configuration: Feed Bunker + Washing Nozzle Vibrating Screen + Helical Washer / Bucket Washer / Dewatering Screen and Hydrocyclone + Conveyor Belts Total Motor Power: Varies according to production capacity Electric Generator Requirement: Varies according to production capacity Weight: Varies according to production capacity Why Should You Choose CONSTMACH Stationary Washing and Screening Plants? CONSTMACH combines its long-standing engineering experience in washing and screening technologies with high quality standards. All systems provide long-term use with low maintenance costs thanks to their durable steel construction and energy-efficient motors. In addition, with project-based customization options, it offers full compliance with each customer's production goals. Thanks to its superior service network and fast spare parts supply, CONSTMACH plants preserve the value of your investment in the long term. What Does Constmach Do? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, functionality: fully functional, 1 used: Universal Pantograph Engraving Machine • Model: Fridrich Deckel GK 12 • Application: Fine engraving, copy milling, model making • Working area (workpiece): approx. 200 x 350 mm • Copy template area: approx. 320 x 450 mm • Enlargement/Reduction: 1:1.5 to 1:10 • Year of manufacture: unknown • Spindle motor: approx. 250W • Spindle speed: multiple stages, variable • Condition: used, tested, fully functional Pedpfjxa Ap Eox Adzera

Year of construction: 2018, operating hours: 303 h, condition: refurbished (used), functionality: fully functional, The internal engraving system delivered by Cerion GmbH in 2018 has seen almost no operating hours. The laser is in as-new condition. The original purchase price of the system was €49,000. Supra Laser Solutions GmbH is the successor to Cerion and Cericom GmbH in the field of internal engraving. The system is factory-tested and fully functional. A 12-month warranty is provided on the system, including the laser. Prodpjxvc Igefx Adzsa

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,600 mm, laser power: 60 W, type of cooling: air, total width: 800 mm, total height: 1,800 mm, total length: 1,700 mm, working range: 1,200 mm, warranty duration: 6 months, height adjustment type: electric, table height: 7,000 mm, table length: 4,000 mm, Equipment: cabin, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Specifications - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air cooling - Power supply: 230 V / 50 Hz - Scanner & optics - X-Y galvo scanner with mirror mount - F-theta lens: F = 200 mm, anti-reflective protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Fully enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Control & Software - Industrial PC Marking software: - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap - Intuitive, user-friendly interface Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty - CE certified, TÜV-tested Prodpfxeyfucvo Adzoa Condition & Delivery - Refurbished, technically tested Offer valid ex works plus shipping, while stocks last

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 300 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 350 mm, table length: 700 mm, table width: 500 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, Equipment: cabin, New: SK LASER KOLLTRONIC F20iW1 – 20 W IPG fiber laser with automatic drawer system, Laser Class 1 System Concept - Complete system consisting of fiber laser + Workstation 1 with a drawer system for efficient loading and unloading. - Automatic initiation of the laser job when the drawer is closed. At the end of the job, the laser head is automatically retracted in the Z-direction from the working area. Workstation & Drawer System: - Sitting/standing workstation with ample legroom - Aluminum housing - Bright work light, suction connection DN50 - Drawer system: 2 positions, max. load 300 kg (150 kg per side) - Drawer dimensions approx. H = 500 mm × W = 700 mm, motorized travel - Doors monitored by sensors, safety equipment: emergency stop, interlock, safety relay Axis System – SK LASER X, Y, Z travel: - X-axis 500 mm computer-controlled - Y-axis 2 × 500 mm computer-controlled - Z-axis 350 mm computer-controlled (travel distances depend on installation) - Two spindles per axis for increased stability - Axis controller - Made in Germany Laser – IPG fiber laser: - Diode-pumped ytterbium fiber laser - Output power: 20 W - Peak power: 1 mJ at 20 kHz - Pulse duration: 200 ns - Wavelength: 1060 – 1070 nm - Pulse frequency: 20–80 kHz - Beam quality M² < 1.6 - Air-cooled, power consumption < 400 W - Red pilot laser + 2 distance lasers (650 nm, Podpfx Adeyizr Sjzsra

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 150 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, working range: 175 mm, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, IPG beam source – Laser class 1 · Made in Germany Workstation – Heavy-duty design: - Sit/stand workstation, aluminum housing, fully enclosed - Front door with laser safety glass, bright work lighting - Stainless steel work platform, 25 mm perforated grid (710 × 400 mm) - Manually movable drawer, precision rails, load capacity up to 150 kg - Extraction nozzle DN50, motorized Z-axis (travel distance 500 mm) - Interlock, emergency stop, safety relay Performance Level 4 Fiber Laser: - Diode-pumped ytterbium fiber laser, 50 W - Pulse energy: 1.0 mJ, pulse duration 100 ns - Wavelength: 1060–1070 nm, pulse frequency 20–200 kHz - Beam quality M² < 1.2 - Air-cooled, power consumption < 400 W - Pilot laser + 2 distance lasers (laser class 2) Predpfx Adjyim S Ijzja Scanner & Optics: - F-Theta lens F = 160 mm (marking field 110 × 110 mm) - Optional: F = 254 mm, adjustment range up to table height - X-Y galvo scanner for 1064 nm - Max. scan speed 4 m/s Control & Software: - Industrial PC, Windows 11 - Monitor, keyboard & mouse, monitor arm - KOLLTRONIC marking software: text, logos, QR/DataMatrix, barcodes - Matrix function for batch processing - Easy positioning, focusing, designing, working, coding Additional equipment: - Rotary engraving unit for cylindrical parts up to Ø 60 mm - Controller & software upgrade included Operating conditions: - Power supply: 230 V / 50 Hz - Operating temperature: 15–35 °C Condition: - New machine - CE compliant - Made in Germany

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 350 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, SK LASER KOLLTRONIC F20iW1 · IPG MOPA 20 W · XXL Workstation · X/Y/Z axis travel Laser Safety Class 1 · CE · Made in Germany System concept: - New complete system with IPG MOPA 20 W fiber laser + XXL workstation for productive operation. The workstation features a - removable central worktable, with the floor area beneath freely accessible. XXL Workstation: - Seated/standing workstation with ample legroom - Aluminium housing - Bright work light, extraction nozzle DN50 - Side and front doors: left and right side, front door with slot - Doors monitored by sensors, safety equipment: emergency stop, interlock, safety relay Axis system – SK LASER X/Y/Z travel: - Gantry with 2 motorized Z-axes and rotary axis - X-axis 500 mm computer-controlled - Y-axis 2 × 500 mm computer-controlled - Z-axis 350 mm computer-controlled (travel path depends on installation) - 2 spindles per axis for increased stability - Axis controller Prodpfeyizvwex Adzoa - Made in Germany Laser – IPG MOPA fiber laser: - Output power: 20 W - Peak power: 1 mJ at 20 kHz - Pulse duration: 2-350 ns, MOPA (plastic-compatible) - Wavelength: 1060 – 1070 nm - Pulse frequency: 20–80 kHz - Beam quality M² < 1.6 - Air-cooled, power consumption < 400 W - Red pilot laser + 2 distance lasers (650 nm,

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 6 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, travel distance Z-axis: 500 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 355 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, UV Fiber Laser 355 nm, 6 W – NEW, SK LASER KOLLTRONIC with Workstation, Made in Germany Laser Source IPG – Made in Germany Laser Safety Class 1 Workstation: - Combined sit/stand workstation with ergonomic legroom - Fully enclosed aluminum profile construction - Front door with laser protection glass for clear visibility - Bright workspace lighting - Dimensions: H 1760 × W 920 × D 940 mm - Work platform: Stainless steel plate with 25 mm hole grid (710 × 400 mm) - Rear service door, screwed for easy part loading - Motorized Z-axis: travel distance 500 mm (focus depending on lens) - Extraction nozzle DN50 (extraction optional) - Safety (PL4) - Emergency stop - Interlock with 2 standard relays - Safety relay for door monitoring UV Fiber Laser: - Wavelength: 355 nm - Power: 6 W 40 kHz - Pulse energy: 20 µJ - Pulse frequency: 10–300 kHz Pedpfx Asyiz Dzsdzora - Air cooled - Pilot laser red light + 2 distance lasers for focus adjustment (Laser class 2) - Laser head manually adjustable in Y-axis Scanner & Optics - F-Theta lens F = 160 mm, anti-reflective protective glass - Marking field: 110 × 110 mm Control: - Windows 11 - 19" TFT monitor, keyboard, mouse - Interfaces: RS232 / Ethernet / USB - KOLLTRONIC marking software: text, logos, QR/Data Matrix, barcodes Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE compliant · Made in Germany

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: F20iMW1 Faserlaser, workpiece weight (max.): 50 kg, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, overall weight: 250 kg, warranty duration: 6 months, height adjustment type: electric, scan area width: 175 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,064 nm, Equipment: cabin, Used fiber laser system for professional engraving, marking, and labeling of metals and plastics. Industrial quality, laser class 1, CE-compliant, Made in Germany. Technical Data - Laser source: IPG Ytterbium fiber laser (MOPA) - Power: 20 W - Wavelength: 1064 nm - Pulse frequency: 20–200 kHz - Beam quality: M² < 1.6 - Power supply: 230 V / 50 Hz Scanner & Optics - X-Y galvo scanner for 1064 nm - F-Theta lens f = 254 mm - Marking field: approx. 175 × 175 mm - Pilot laser (red) + 2 focus distance lasers for focus setting Predpfjyctfdox Adzja Machine & Work Area - Enclosed laser class 1 workstation - Combined sit/stand workstation - Motorized Z-axis (400 mm total travel) - Stainless steel worktable with 25-mm perforated grid - Extraction port DN50 (extraction unit not included) Control & Software - Industrial PC - SK CONTROL marking software (texts, logos, QR codes, variable data) - Ethernet, USB, RS232, Start/Stop for extraction - 23" monitor, keyboard & mouse Scope of Delivery & Safety - Complete machine with aluminum housing - Emergency stop, main switch, status indicators - Circuit diagrams & operating manual - CE, TÜV-tested - Laser class 1

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 350 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 1,200 mm, total height: 1,800 mm, total length: 940 mm, working range: 175 mm, height adjustment type: electric, door opening width: 1,100 mm, door opening height: 700 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Laser Protection Class 1 · Made in Germany · NEW 12-month warranty Pedpfx Adjyipxaezera System & Workstation: - Combined sit/stand workstation, aluminum housing - Fully glazed right-front door, safety glass LK 1 - Bright work light, suction nozzle DN50 - Standard size: H 1760 × W 920 × D 940 mm - Workstation XXL W 1200 × H 1800 × D 940 mm, sliding roof for crane loading, max. 350 kg - Manual sliding door, opening approx. 1100 × 700 mm - Safety equipment: emergency stop, two-channel interlock, Performance Level 4 - Motorized Z-axis, travel range 400 mm, focus dependent on lens Laser: - IPG Ytterbium fiber laser - Output power 20 W, pulse energy 1.0 mJ - Wavelength 1060–1070 nm, pulse duration 100 ns - Pulse frequency 20–80 kHz, air-cooled, power consumption < 400 W - Beam quality M² < 1.2 - Pilot laser + 2 distance lasers, Y-direction manually adjustable Scanner & Control: - F-Theta lens F = 254 mm, marking field 175 × 175 mm - Windows 11 Pro, SSD, 23" monitor, keyboard & mouse - Interfaces: RS232, Ethernet, USB - SK CONTROL software for texts, logos, QR/datamatrix codes, barcodes Work Area & Safety: - Magnetic positioning on stainless steel platform 710 × 400 mm, hole grid 25 mm - Operating conditions: 230 V / 50 Hz, 15–35 °C

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1746, shaft length: 10,564 mm, laser power: 100 W, type of cooling: air, working range: 1,750 mm, overall weight: 205 kg, table height: 1,760 mm, table length: 12,000 mm, table width: 9,200 mm, Equipment: cabin, Used fiber laser system for laser marking, engraving, marking, and microstructuring on metals and plastics. Ex-display machine, laser class 1, CE-compliant, Made in Germany. Laser & Beam Source - IPG Ytterbium fiber laser - Power: 100 W - Wavelength: 10564 nm - Pulse energy: 0.2–1.0 mJ - Cooling: Air-cooled, no external cooling required - Power supply: 230 V / 50 Hz - Scanner: X-Y galvanometer with mirror mount for 1064 nm Note: Manufacturer’s lab values; actual values may vary depending on the application. Scanner & Control - F-Theta lens: f = 254 mm, anti-reflection protective glass - Marking field: 175 × 175 mm - Max. scan speed: 4 m/s Industrial PC with Windows 11 Pro, SSD storage - Controller cards for laser & scanner - Digital & analog interfaces: RS232, Ethernet, USB - Custom adaptations optional - 19" TFT color monitor, keyboard & mouse - SK CONTROL software - Industrial software for texts, logos, QR codes, variable data - Intuitive user interface, logo/photo import via mouse click - Job management and parameter library for reproducible quality - Pilot laser displays laser position as red rectangle Workstation 1 – SK LASER - Enclosed laser class 1 workstation Pjdpfeyfvhgsx Adzora - Combined sitting/standing workstation - Aluminum profile housing, front door with laser safety glass, bright work lighting - Dimensions: H 1760 × W 920 × D 1200 mm - Stainless steel worktop with 25-mm hole grid, 710 × 400 mm - Motorized Z-axis, travel 500 mm (gross) - Rear door for oversized workpieces (when open: laser class 4) - Extraction nozzle DN50 for fume extraction - Redundant safety equipment: emergency stop, interlock, safety relay performance level 4 - Operating temperature: 15–35°C - Connection load: 230 V / 50 Hz Condition & Delivery - Ex-display, tested machine - Optionally: Delivery including commissioning within Germany

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 25 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,400 mm, total height: 2,000 mm, total length: 1,500 mm, working range: 280 mm, height adjustment type: electric, scan area length: 280 mm, scan area width: 280 mm, travel distance X-axis: 600 mm, travel distance Z-axis: 400 mm, table length: 1,000 mm, table width: 1,000 mm, space requirement width: 1,400 mm, space requirement height: 2,000 mm, laser wavelength: 1,070 nm, space requirement length: 1,500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 280 mm, Equipment: cabin, Automated Fiber Laser System with SK-LASER Workstation and Rotary Table for Series Production. Laser Class 1 · CE · Made in Germany System: - Complete system: fiber laser + workstation + rotary table - 2 processing positions with partition wall (400 mm) - Operator protection via light curtain - 2-cycle operation, 180° rotation Equipment: - Workstation XXL: W 1,400 × H 2,000 × D 1,500 mm - Option: High-speed scan head Superscan Rotary Table & Axes: - Rotary table Ø 1,000 mm, 25 mm hole grid - Automatic production cycle - 2 × Z-axis 400 mm, 1 × X-axis 600 mm Prodpfxeyil Dvs Adzja - Ball screw drive, load capacity up to 25 kg Laser – IPG: - 50 W, 1.0 mJ - 50–250 kHz, 100 ns - 1060–1070 nm, M² < 1.2 - Air-cooled, < 400 W Optics: - F-Theta f = 420 mm - Field approx. 280 × 280 mm - Pilot laser + distance laser Control System: - Windows 11 Pro, SSD, 23" monitor - Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR/DM, serial numbers, material parameters Workstation: - Seated/standing workstation - Extraction nozzle DN50 - Emergency stop, dual-channel interlock, safety relay Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE-compliant · Made in Germany

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air-cooled, < 400 W Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) - Extraction port DN50 - Safety (PL4) Predpfxsyimpae Adzea - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE · Made in Germany

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 250 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, total height: 2,700 mm, working range: 175 mm, height adjustment type: mechanical, scan area length: 175 mm, scan area width: 175 mm, table length: 1,200 mm, table width: 1,200 mm, space requirement height: 2,700 mm, laser wavelength: 1,064 nm, working height: 500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, IPG Fiber Laser Type M · Laser Class 1 · Made in Germany XXL Workstation – Custom Construction: - Standing workstation with table height designed for standing operation - Folding sliding door, right side fully glazed with safety glass, class LK 1 - Bright work light - Stainless steel suction nozzle DN50 - Heavy-duty drawer system: up to 250 kg, internal dimensions 1.2 × 1.2 m - External position: for loading/unloading - Internal position: for laser operation - Programmable auto-start, magnetic switch as interlock - Slots on both sides for extra-long parts, beam protection brush - Roof height for parts up to 500 mm under 254 mm lens - Z-axis manual, base value storable - Machine external height: approx. 2.50 – 2.70 m Laser – IPG MOPA: - Diode-pumped ytterbium fiber laser - Power: 20 W - Pulse duration adjustable (also for plastics) - Wavelength: 1064 nm - Pilot laser + 2 distance lasers (650 nm, Psdpfx Adoyimz Aszsra

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 940x1250x1400 mm Weight 250 kg Psdpfx Ajv A Hb Uodzera Total power requirement 3,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x900x1900 mm Weight 800 kg Total power requirement 3,5 kw Pjdpfxjv A Hcxe Adzora

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1340x1050 mm Weight 640 kg Total power requirement 1,3 kw Prodjvz Hk Hjpfx Adzsa